idler shaft No Pictures


Category Matches

Shafting Precision Ground

TopShow Pictures

Shafts - Idler

Search Rating: 100%

Ready made precision ground idler shafts.

Internal grease hole can be accessed by drilling if required. Use with your idler pulleys. Can be used with the idler tensioners listed on this site or use in your own design.

Related Information:

Tensioners

TopShow Pictures

Tensioner - Adjustable Screw

Search Rating: 93%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Uses a screw adjustment for positive precise tensioning.

Idler shaft and pulleys not included with tensioner.

Related Information:

Tensioner - Drive - Single Adjusting - Shaft Mount

Search Rating: 93%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Mounts on any free point of a fixed shaft allowing controlled tensioning around 360o.

Idler shaft and pulleys not included with tensioner.

Related Information:

Tensioner - Fixed Angle

Search Rating: 93%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Can be mounted on top of any flat surface to provide horizontal tenaioning.

Idler shaft and pulleys not included with tensioner.

Related Information:

Tensioner - Fixed Flanged

Search Rating: 93%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Compact design allows mounting where space is limited.

Idler shaft and pulleys not included with tensioner.

Related Information:

Tensioner - Horizontal Mount

Search Rating: 93%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 88.9mm travel and is mounted 90o to the length of the part. Both ends are tapped so the shaft can be threaded on either side of the tensioner.

Idler shaft and pulleys not included with tensioner. Hole is tapped to accept 38.1mm diameter idler shaft (ordered separately).

Related Information:

Tensioner - Vertical Mount

Search Rating: 93%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 88.9mm travel through the use of the vertical slot. Head is drilled and tapped to accept 38.1mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner.

Related Information:

Rollers

TopShow Pictures

Rollers - Durasoft - Shaft Mount - Black Neoprene

Search Rating: 93%

Also see combined categories:
All Shaft Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.


Rollers - Durasoft - Shaft Mount - Coloured Urethane

Search Rating: 93%

Also see combined categories:
All Shaft Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.


Rollers - Solid - Shaft Mount - Black Neoprene

Search Rating: 93%

Also see combined categories:
All Solid Shaft Mount Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed.


Rollers - Solid - Shaft Mount - Coloured Urethane

Search Rating: 93%

Also see combined categories:
All Solid Shaft Mount Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Blue colour may turn a shade of green when exposed to UV lighting.


Tensioners

TopShow Pictures

Tensioner - Drive - Adjustable Angle

Search Rating: 93%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Fixed base with adjustable arm through 360o.

Idler shaft and pulleys not included with tensioner.

Related Information:

Tensioner - Drive - Adjustable Flanged

Search Rating: 93%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. With flanged base that can be mounted in a tight area.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened.

Related Information:

Tensioner - Heavy Duty - Type 2

Search Rating: 92%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted to the side at 90o and is anchored by set screws.

Related Information:

Tensioner - Heavy Duty - Type 3

Search Rating: 92%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted straight out from face and anchored by set screws. Shaft is located in the centre of the tensioner between the adjusting slots.

Related Information:

Tensioner - Heavy Duty - Type 4

Search Rating: 92%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted straight out from face and anchored by set screws. Adjusting slots are parallel to each other.

Related Information:

Pulleys Idler

TopShow Pictures

Pulleys - Timing - Idler

Search Rating: 91%

Also see combined categories:
All Idler Pulleys

Complete with Needle Roller Bearing.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.

Related Information:

Tensioners

TopShow Pictures

Tensioner - Drive - Double Adjust - Base Mount

Search Rating: 91%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Adjusting slot assists with precise adjustments.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened.

Related Information:

Chain and Sprockets Roller

TopShow Pictures

Sprockets - Idler

Search Rating: 89%

Also see combined categories:
All Sprockets for Roller Chain

Complete with Needle Roller or Ball Bearings. 3.75mm to 25.4mm pitch.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.

Related Information:

Hobby Shafting

TopShow Pictures

Shafting - Ground - Hobby - Steel

Search Rating: 51%

Also see combined categories:
All Shafting
All Steel Shafting

Silversteel shafting for hobbies. Not suitable for precision bearings.

Suitable for use with plastic gears, bushes, couplings etc. Not recommended for use with precision steel or stainless steel bearings. Some sizes have special features such as serrations or small barbs (noted in description). Unground ends. Ideal for axles in robotic applications and educational projects.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Shafting - Ground - Hobby - Steel.

Square Shaft

TopShow Pictures

Shafting - Linear - Square

Search Rating: 51%


Shafting Aluminium

TopShow Pictures

Shafting - Aluminium

Search Rating: 51%

Also see combined categories:
All Shafting
All Aluminium Shafting

Drylin aluminium shafting is recommended for use with Igubal Drylin bearings or Frelon lined bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.


Shafting - Aluminium - Ceramic Coated

Search Rating: 51%

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Related Information:

Shafting - Aluminium - Ceramic Coated - Tapped

Search Rating: 51%

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Related Information:

Shafting - Pipe - Aluminium

Search Rating: 51%

Also see combined categories:
All Pipe Shaft
All Metal Tube

Recommended for use with Igubal Drylin bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and Less than 9.


Shafting - Supported - Pre-Drilled - Aluminium

Search Rating: 51%

Also see combined categories:
All Shafting
All Aluminium Shafting

For Drylin Bearings.

Material : AlMgSi 0.5 F22. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Spec. Electr. Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and less than 9.


Shafting General Purpose

TopShow Pictures

Shafting - Carbon Steel - Keyed

Search Rating: 51%

Also see combined categories:
All Shafting
All Steel Shafting

Keyways are cut full length of each bar. Low carbon steel C1018. Good case hardening properties.

Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00. Unhardened carbon steel. Special order may be available for stainless steel, other diameters, other lengths. Please ask.


Shafting - Unground - Silver Steel

Search Rating: 51%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

Unhardened silversteel shafting for general purposes. Not suitable for precision bearings until machined to correct tolerances and hardened.

See also drill rod. Drill Rod.

Related Information:

Shafting Precision Ground

TopShow Pictures

Shafting - Ground - Precision - Chrome Plated

Search Rating: 51%

Precision ground shafting. AISI C1060 and chrome plated for corrosion resistance. Hardened and recommended for use with precision bearings. Ends are not plated.


Shafting - Ground - Precision - High Carbon Steel

Search Rating: 51%

Also see combined categories:
All Shafting
All Steel Shafting

Precision ground shafting. AISI C1060. Hardened and recommended for use with precision bearings.

Related Information:

Shafting - Ground - Precision - Stainless 303 Grade

Search Rating: 51%

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting.

Related Information:

Shafting - Ground - Precision - Stainless 316 Grade

Search Rating: 51%

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting.

Related Information:

Shafting - Ground - Precision - Stainless 416 Grade Hardened

Search Rating: 51%

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting. 416 grade. Hardened and recommended for use with precision bearings.

Related Information:

Shafting - Ground - Precision - Stainless 420 Grade Hardened

Search Rating: 51%

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting. 420 grade. Hardened and recommended for use with precision bearings.

Related Information:

Shafting - Ground - Precision - Stainless 440C Grade Hardened

Search Rating: 51%

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting. 440C grade. Hardened and recommended for use with precision bearings.

Related Information:

Shafting - Ground - Precision - Titanium - Ti-Gr2-TA1

Search Rating: 51%

Also see combined categories:
All Shafting
All Titanium Shafting

CP2 Commercially Pure Titanium Grade 2. Tensile Strength 35.2 kgf/mm2. Yield Strength 28.2 kgf/mm2. Elongation 20 Percent.

Commercially pure for general industrial corrosion applications. UNS R50400. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.3, O 0.25, Ti Balance.

Related Information:

Shafting - Ground - Precision - Titanium - Ti-Gr5-TC4

Search Rating: 51%

Also see combined categories:
All Shafting
All Titanium Shafting

Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Related Information:

Shafting - Pre Drilled and Tapped - High Carbon Steel

Search Rating: 51%

Also see combined categories:
All Shafting
All Steel Shafting

For use with rail supports and open linear bearings

Straightness: 0.1 mm / mtr.


Shafting - Pre Drilled and Tapped - Stainless Steel Steel

Search Rating: 51%

Also see combined categories:
All Shafting
All Stainless Shafting

For use with rail supports and open linear bearings


Shafts - Pinion

Search Rating: 51%


Shafting General Purpose

TopShow Pictures

Shafts - Flexible - Panel Mount - Cased

Search Rating: 51%

Also see combined categories:
All Flexible Panel Mount Shaft

See PDF file at bottom of internet page for Performance Data.

Related Information:

Shafts - Flexible - Panel Mount - Open

Search Rating: 51%

Also see combined categories:
All Flexible Panel Mount Shaft

See PDF file at bottom of internet page for Performance Data.

Related Information:

Flexible Shaft

TopShow Pictures

Shafts - Flexible - Coupling Ends - Open - Mild Steel

Search Rating: 51%

Also see combined categories:
All Coupling End Flexible Shaft

Flexible shafting with coupling ends ready to attach to a fixed shaft.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Related Information:

Splined Shafts and Bushes

TopShow Pictures

Splined Shafts - Stainless Steel

Search Rating: 51%

Also see combined categories:
All Splined Shafts

Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Related Information:

Shafting General Purpose

TopShow Pictures

Rod - Drill Blanks

Search Rating: 50%

Also see combined categories:
All Silver Steel Drill Blanks
All Drill Rod

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.


Rod - Drill - General

Search Rating: 50%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Chrome vanadium alloy with unfinished ends. Requires heat treating to harden. Small diameters may not be perfectly straight. Heat treating by air, water or oil.

Related Information:

Shafting Precision Ground

TopShow Pictures

Rail Supports - Without Shaft

Search Rating: 50%

Also see combined categories:
All Shaft Supports

For mounting of linear shafting.

Shafting sold separately. Support is made from aluminium.

Related Information:

Rail Supports - With Shaft

Search Rating: 50%

Also see combined categories:
All Shaft Supports

Includes linear shafting.

Includes shaft to h6 tolerances. Support is made from aluminium.

Related Information:

Rail Supports - With Shaft - One Piece

Search Rating: 50%

Also see combined categories:
All Shaft Supports

One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.

Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments.

Related Information:

Supports - Pedestal Two Bolt

Search Rating: 50%

Also see combined categories:
All Supports

For linear shafting.

Cast Aluminium or Malleable Iron. Clamping Screw (supplied) made of Steel.

Related Information:

Shafting General Purpose

TopShow Pictures

Rod - Drill - A-2 Air Hardening

Search Rating: 49%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Air hardening. Maximum abrasion resistance. 65 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Rod - Drill - O-1 Oil Hardening

Search Rating: 49%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

For general toolroom use. Good non-deforming characteristics. Moderate resistance to abrasion. 90 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Rod - Drill - Oil Hardening - 480 Series

Search Rating: 49%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

General purpose tool steel with good wear resistance, toughness and machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Rod - Drill - S-7 Air Hardening

Search Rating: 49%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Air hardening molybdenum, chromium, shock resisting. High impact strength with moderate wear resistance. 95 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Rod - Drill - W-1 Water Hardening

Search Rating: 49%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

High abrasion resistance and high toughness when hardened. 100 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Assortments

TopShow Pictures

Assortment Kits - Various

Search Rating: 48%

Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Shim - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins - Clevis Pins


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Assortment Kits - Various.

Rollers

TopShow Pictures

Rollers - Idler - With Plain Sintered Bearing

Search Rating: 48%

Also see combined categories:
All Tyred OD Bearings
All Rollers

Related Information:

Collars

TopShow Pictures








Collars - Shaft - Gripfast - 304 Stainless Steel

Search Rating: 48%

Also see combined categories:
All Round Bore Shaft Collars

Self Locking - Quick Release.

304 Stainless Body, Retention Ring, Balls and Springs.

Related Information:

Collars - Shaft - Gripfast - ABS Plastic

Search Rating: 48%

Also see combined categories:
All Round Bore Shaft Collars

Self Locking - Quick Release.

265 kg Load Capacity (600 lbs). ABS Plastic Inner Body and Outer Sleeve. Steel Retention Ring, Balls and Springs.

Related Information:


Collars - Shaft - Hex Bore - One Piece - Steel

Search Rating: 48%

Also see combined categories:
All Hex Bore Shaft Collars



Collars - Shaft - Hex Bore - Two Piece - Steel

Search Rating: 48%

Also see combined categories:
All Hex Bore Shaft Collars


Collars - Shaft - Hinged - Stainless Steel

Search Rating: 48%

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:

Collars - Shaft - Hinged - Steel

Search Rating: 48%

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. Steel 12L14 (9SMn Pb36)

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:

Collars - Shaft - Standard - Nylon

Search Rating: 48%

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Standard one piece nylon shaft collar with set screw

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:

Collars - Shaft - Standard - Stainless Steel

Search Rating: 48%

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Includes miniature precision types. 303 and 316 Types.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:

Collars - Shaft - Standard - Steel

Search Rating: 48%

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Includes miniature precision types. Carbon steel.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:

Collars - Shaft - With Integral Shim

Search Rating: 48%

Also see combined categories:
All Round Bore Shaft Collars

Bore tolerance (+0.003/+0.013). Imperial Collars have undersized tolerances. Metric Collars have oversized tolerances.

Related Information:

Shaft Extenders and Reducers

TopShow Pictures

Extenders - Shaft

Search Rating: 48%

Miniature and large shaft extenders and reducers. Used to increase or reduce the diameter, or increase the length of shafts.

Also known as shaft increasers or shaft reducers.

Related Information:

Gearbox Output Shafts

TopShow Pictures

Gearboxes - Output Shafts - For E Type Helical Reducers

Search Rating: 48%

Also see combined categories:
All Gearbox Shafts

For use in Right Angle gearboxes with bores. E Series.

Stainless 303 shaft. Steel keys and circlips. E-X and E-DX types suitable for E type gearboxes (right angle types).

Related Information:

Gearboxes - Output Shafts - For P - PF and FF Type Worm Reducers

Search Rating: 48%

Also see combined categories:
All Gearbox Shafts

For use in Cross Axis gearboxes with bores. P, PF and FF Series.

Stainless 303 shaft. Steel keys and circlips. P-X and P-DX types suitable for P and PF type gearboxes (cross axis types).

Related Information:

Pulleys Grooved

TopShow Pictures

Pulleys - U Groove - Idler - Plastic - With Ball Bearing

Search Rating: 48%

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings.

Related Information:

Pulleys - U Groove - Idler - Plastic - With Plain Bore

Search Rating: 48%

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings.

Related Information:

Pulleys - U Groove - Idler - Steel - With Bearing

Search Rating: 48%

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Steel with Steel Ball Bearings

Use with round belts such as Rounthane or O-Rings.

Related Information:

Shaft Extenders and Reducers

TopShow Pictures

Reducers - Bore

Search Rating: 48%

Inch to Metric / Inch to Inch / Metric to Metric. Brass reducing bushes.

S = Recommended set screw positions. C = Recommended position for single set screw fastening. T = Recommended position for tangential screw in clamp hub.

Related Information:

Ball Splines Linear

TopShow Pictures

Linear Ball Splines - Shaft

Search Rating: 48%

Also see combined categories:
All Linear Ball Splines

Use with either flanged or unflanged Linear Ball Spline Bearings.

Related Information:

Clutches

TopShow Pictures

Clutches - Slip - Magnetic Particle - Integral Shaft - No Power

Search Rating: 47%

Also see combined categories:
All Slip Clutches

Requires no power.

Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. See PDF sheet at bottom of this page.

Related Information:

Spacers

TopShow Pictures

Spacers - Round - Through Bore - Aluminium

Search Rating: 47%

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Shaft spacers - Aluminium


Spacers - Round - Through Bore - Brass

Search Rating: 47%

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Shaft spacers - Brass


Spacers - Round - Through Bore - Nylon

Search Rating: 47%

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Non Metallic

Shaft spacers - Nylon


Spacers - Round - Through Bore - Steel

Search Rating: 47%

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Shaft spacers - Steel


Spacers - Round - Through Bore - Stainless Steel

Search Rating: 46%

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Shaft spacers - Stainless Steel


Clutches

TopShow Pictures

Clutches - Magnetic Particle 24VDC

Search Rating: 46%

Also see combined categories:
All Magnetic Clutches

Ultrafast Responses.

The input shaft becomes coupled to the output shaft with electrical excitation. Shafts have a flat on the end. Soft or fast start.

Related Information:

Bearings Press In

TopShow Pictures

Bearings - Press-Fit - Acetal - SDP

Search Rating: 45%

Also see combined categories:
All Press In Bearings

Press fit installation. Do not press bearing against insert. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Carbon steel outer. Self aligning to +/- 5o. Use any shaft material with 0.4 um or finer finish.

Related Information:

Stroke Rotary Bushings

TopShow Pictures

Bushings - Stroke Rotary - Miniature

Search Rating: 45%

Also see combined categories:
All Stroke Rotary Bushings

2 to 12mm Shaft Sizes. Can operate in both linear and rotary directions at the same time.

Set includes outer ring, ball cage and shaft. Ball Cage: Brass Balls: Hard Steel / Shaft: Hard Steel Outer Ring: Hard Steel. Temperature: +100oC (Constant), +120oC (Maximum). Stroke: = (L1 - Lb) x 2. Supplied with extreme accuracy with zero to minimum preload.

Related Information:

Linear Bearings

TopShow Pictures

Bearings - Linear - Ball - Stainless Steel - Closed

Search Rating: 45%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 124226 products in 3079 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.