Small Parts & Bearings - an MBA company

Hobby Gears Categories


Gears - Mitre - Module 0.5 - Hobby - Economy - Plastic
Gears - Mitre - Module 0.5 - Hobby - Economy - Plastic

Also see combined categories:
All Metric Mitre Gears
All Hobby Gears

POM Plastic

Plastic Only. Inexpensive for hobby and toy use. No locking mechanisms. This category may be available in the new MBA online store at Gears - Mitre - Module 0.5 - Hobby - Economy - Plastic.

You may also like to check if Hobby and Engineering Supplies list a range of Gears - Mitre - Module 0.5 - Hobby - Economy - Plastic.


Gears - Crown Wheel - Module 0.5 - Hobby - Plastic
Gears - Crown Wheel - Module 0.5 - Hobby - Plastic

Also see combined categories:
All Hobby Gears

PCD = No. of Teeth x 0.500mm - POM Plastic

Plastic Only. Inexpensive for hobby and toy use. No locking mechanisms. This category may be available in the new MBA online store at Gears - Crown Wheel - Module 0.5 - Hobby - Plastic.

You may also like to check if Hobby and Engineering Supplies list a range of Gears - Crown Wheel - Module 0.5 - Hobby - Plastic.


You may also be interested in

Pulleys Grooved


Pulleys - Geared - Hobby
Pulleys - Geared - Hobby

Also see combined categories:
All Flat Belt Pulleys

Small UPE grooved pulleys suitable for driving small o'rings or rubber bands. O-rings should be less than 2mm section diameter.

This category may be available in the new MBA online store at Pulleys - Geared - Hobby.

You may also like to check if Hobby and Engineering Supplies list a range of Pulleys - Geared - Hobby.


Gearmotors Basic


Gearmotors - Basic - Hobby - 12.1mm Diameter
Gearmotors - Basic - Hobby - 12.1mm Diameter

Also see combined categories:
All Basic Gearmotors

Small light weight geared motors used in toys and small solar applications

NOTE! These do not have a standard output shaft. The output is a plastic crossed block (see diagram) which is designed to be fitted to a fabricated coupling in O.E.M applications. However, the plastic block would be suitable for drilling and attaching objects with wire for rotating mobile type applications. This category may be available in the new MBA online store at Gearmotors - Basic - Hobby - 12.1mm Diameter.

You may also like to check if Hobby and Engineering Supplies list a range of Gearmotors - Basic - Hobby - 12.1mm Diameter.


Rims - Hobby - Car 1-10 - Off Road - Front - Plastic
Rims - Hobby - Car 1-10 - Off Road - Front - Plastic

Also see combined categories:
All Rims

Rims for RC wheels

This category may be available in the new MBA online store at Rims - Hobby - Car 1-10 - Off Road - Front - Plastic.

You may also like to check if Hobby and Engineering Supplies list a range of Rims - Hobby - Car 1-10 - Off Road - Front - Plastic.


Rims - Hobby - Car 1-10 - Off Road - Rear - Plastic
Rims - Hobby - Car 1-10 - Off Road - Rear - Plastic

Also see combined categories:
All Rims

Rims for RC wheels

This category may be available in the new MBA online store at Rims - Hobby - Car 1-10 - Off Road - Rear - Plastic.

You may also like to check if Hobby and Engineering Supplies list a range of Rims - Hobby - Car 1-10 - Off Road - Rear - Plastic.


Rims - Hobby - Car 1-10 - Road and Drift - Plastic
Rims - Hobby - Car 1-10 - Road and Drift - Plastic

Also see combined categories:
All Rims

Rims for RC wheels

This category may be available in the new MBA online store at Rims - Hobby - Car 1-10 - Road and Drift - Plastic.

You may also like to check if Hobby and Engineering Supplies list a range of Rims - Hobby - Car 1-10 - Road and Drift - Plastic.


Leads - Hobby
Leads - Hobby


Adaptor leads for batteries, battery chargers, servos and receivers including Tamiya, Deans and Losi plugs.

Includes Deans and T Connectors. This category may be available in the new MBA online store at Leads - Hobby.

You may also like to check if Hobby and Engineering Supplies list a range of Leads - Hobby.


Spacers - Round - Hobby
Spacers - Round - Hobby

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Non Metallic

Inexpensive nylon spacers for hobby applications

This category may be available in the new MBA online store at Spacers - Round - Hobby.

You may also like to check if Hobby and Engineering Supplies list a range of Spacers - Round - Hobby.


Couplings - Rigid - Hobby - Brass
Couplings - Rigid - Hobby - Brass

Also see combined categories:
All Rigid Couplings

A selection of inexpensive brass couplings for shaft sizes from 2 to 5 mm.

This category may be available in the new MBA online store at Couplings - Rigid - Hobby - Brass.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Couplings - Rigid - Hobby - Brass.


Channel - Brass
Channel - Brass


For general hobby applications.

This category may be available in the new MBA online store at Channel - Brass.

You may also like to check if Hobby and Engineering Supplies list a range of Channel - Brass.


Rod - Round - Aluminium
Rod - Round - Aluminium

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Aluminium.


Rod - Round - Brass
Rod - Round - Brass

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Brass.


Rod - Round - Copper
Rod - Round - Copper

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Copper.


Rod - Round - Urethane
Rod - Round - Urethane

Also see combined categories:
All Non Metallic Rod - Round

Hard urethane rubber compound. Machinable.

Length +/- 3.2mm. Diameter +/- 2 percent. This category may be available in the new MBA online store at Rod - Round - Urethane.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Urethane.


Rod - Round - Sintered Bronze
Rod - Round - Sintered Bronze

Also see combined categories:
All Metal Rod - Round

Sintered bronze rod is supplied oversized so it can be machine finished to the dimensions shown.

Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. Oil impregnated porous bronze rod. Smaller diameters may not be supplied straight. B438 grade 1, Type 2 - AMS4805-D. SAE 841 Type 1, Class A.

Related Information:


Rod - Round - Stainless Steel
Rod - Round - Stainless Steel

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Stainless Steel.


Rod - Round - Soft Metal Packs
Rod - Round - Soft Metal Packs

Also see combined categories:
All Soft Metal Packs

For general hobby applications. This rod is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths for general hobby applications. Not recommended for heavy duty applications. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Soft Metal Packs.


Strip - Soft Metal Packs
Strip - Soft Metal Packs


For general hobby applications. This brass strip is annealed soft to make it easier to bend. Brass.

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground. This category may be available in the new MBA online store at Strip - Soft Metal Packs.

You may also like to check if Hobby and Engineering Supplies list a range of Strip - Soft Metal Packs.


Angle - Brass
Angle - Brass


Brass angle is great for small hobby projects like building scale models or dioramas.

This category may be available in the new MBA online store at Angle - Brass.

You may also like to check if Hobby and Engineering Supplies list a range of Angle - Brass.


Joints - Tee - Tubing and Rod
Joints - Tee - Tubing and Rod


Inexpensive nylon joiners for hobby tubing and rod

This category may be available in the new MBA online store at Joints - Tee - Tubing and Rod.

You may also like to check if Hobby and Engineering Supplies list a range of Joints - Tee - Tubing and Rod.


Tube - Round - Aluminium
Tube - Round - Aluminium

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

Includes K&S Metals range and more. May be slightly oversized on OD so some reworking might be required before fitting closely mating parts. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. E-mail sales@smallparts.com.au with enquiries.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Tube - Round - Aluminium.


Tube - Round - Brass
Tube - Round - Brass

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

Includes K&S Metals range and more. May be slightly oversized on OD so some reworking might be required before fitting closely mating parts. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. E-mail sales@smallparts.com.au with enquiries.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Tube - Round - Brass.


Tube - Round - Copper
Tube - Round - Copper

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

Includes K&S Metals range and more. May be slightly oversized on OD so some reworking might be required before fitting closely mating parts. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. E-mail sales@smallparts.com.au with enquiries.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Tube - Round - Copper.


Tube - Square - Aluminium
Tube - Square - Aluminium

Also see combined categories:
All Metal Tube - Square

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Includes K&S Metals range and more. This category may be available in the new MBA online store at Tube - Square - Aluminium.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Tube - Square - Aluminium.


Tube - Square - Brass
Tube - Square - Brass

Also see combined categories:
All Metal Tube - Square

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Includes K&S Metals range and more. This category may be available in the new MBA online store at Tube - Square - Brass.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Tube - Square - Brass.


Tube - Square - Copper
Tube - Square - Copper

Also see combined categories:
All Metal Tube - Square

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Includes K&S Metals range and more. This category may be available in the new MBA online store at Tube - Square - Copper.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Tube - Square - Copper.


Tube - Round - Stainless Steel
Tube - Round - Stainless Steel

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

Includes K&S Metals range and more. May be slightly oversized on OD so some reworking might be required before fitting closely mating parts. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. This category may be available in the new MBA online store at Tube - Round - Stainless Steel.

Related Information:

You may also like to check if Hobby and Engineering Supplies list a range of Tube - Round - Stainless Steel.


Gears - Blanks
Gears - Blanks


Blanks for cutting gears and pulleys and friction drives.

This category may be available in the new MBA online store at Gears - Blanks.


Gear Racks - Flexible
Gear Racks - Flexible

Also see combined categories:
All Flexible Gear Racks

Blue acetal. Ideal for curved or irregular surfaces. Can fit a bent radius as small as 75mm.

20o Pressure Angle. Resistant to weak acids and alkalis, oil, grease, petrol, alcohol, ketones. Working temperature 100 Deg. C, Intermittent to 149 Deg. C. See optional rack clamps and guide rails. Longer lengths available on special order.


Gears - Cluster - Module 0.5 - Brass
Gears - Cluster - Module 0.5 - Brass

Also see combined categories:
All Cluster Gears
All Hobby Gears

This category may be available in the new MBA online store at Gears - Cluster - Module 0.5 - Brass.

You may also like to check if Hobby and Engineering Supplies list a range of Gears - Cluster - Module 0.5 - Brass.


Gears - Bevel - 32 Diametrical Pitch - Plastic
Gears - Bevel - 32 Diametrical Pitch - Plastic

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Nylon and Acetal.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. This category may be available in the new MBA online store at Gears - Bevel - 32 Diametrical Pitch - Plastic.

Related Information:


Gears - Mitre - 10 Diametrical Pitch - Steel
Gears - Mitre - 10 Diametrical Pitch - Steel

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - 10 Diametrical Pitch - Steel.


Gears - Mitre - 12 Diametrical Pitch - Steel
Gears - Mitre - 12 Diametrical Pitch - Steel

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - 12 Diametrical Pitch - Steel.


Gears - Mitre - 16 Diametrical Pitch - Steel
Gears - Mitre - 16 Diametrical Pitch - Steel

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Unhardened Steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - 16 Diametrical Pitch - Steel.


Gears - Mitre - 24 Diametrical Pitch - Brass
Gears - Mitre - 24 Diametrical Pitch - Brass

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - 24 Diametrical Pitch - Brass.

Related Information:


Gears - Mitre - 24 Diametrical Pitch - Plastic
Gears - Mitre - 24 Diametrical Pitch - Plastic

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Nylon.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - 24 Diametrical Pitch - Plastic.

Related Information:


Gears - Mitre - 8 Diametrical Pitch - Steel
Gears - Mitre -  8 Diametrical Pitch - Steel

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - 8 Diametrical Pitch - Steel.


Gear Racks - 10DP - 14.5 PA - Steel
Gear Racks - 10DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 10 DP. Approx 7.98mm between teeth. This category may be available in the new MBA online store at Gear Racks - 10DP - 14.5 PA - Steel.


Gear Racks - 12DP - Steel
Gear Racks -  12DP - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

12 DP. Approx 6.65mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 12DP - Steel.


Gear Racks - 16DP - Plastic
Gear Racks -  16DP - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.

16 DP. Approx 4.99mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 16DP - Plastic.


Gear Racks - 16DP - Steel
Gear Racks -  16DP - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. DP stands for Diametrical Pitch imperial sizes.

16 DP. Approx 4.99mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 16DP - Steel.


Gear Racks - 20DP - 14.5 PA - Steel
Gear Racks - 20DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 20 DP. Approx 3.99mm between teeth. This category may be available in the new MBA online store at Gear Racks - 20DP - 14.5 PA - Steel.


Gear Racks - 24DP - 14.5 PA - Plastic
Gear Racks -  24DP - 14.5 PA - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 24DP - 14.5 PA - Plastic.


Gear Racks - 24DP - Stainless
Gear Racks -  24DP - Stainless

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 24DP - Stainless.


Gear Racks - 32DP - 14.5 PA - Plastic
Gear Racks -  32DP - 14.5 PA - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 32DP - 14.5 PA - Plastic.


Gear Racks - 32DP - Stainless Steel
Gear Racks -  32DP - Stainless Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 32DP - Stainless Steel.


Gear Racks - 48DP - 14.5 PA - Plastic
Gear Racks -  48DP - 14.5 PA - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 48 DP. Approx 1.66mm between teeth. This category may be available in the new MBA online store at Gear Racks - 48DP - 14.5 PA - Plastic.


Gear Racks - 48DP - Stainless
Gear Racks -  48DP - Stainless

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 48 DP. Approx 1.66mm between teeth. This category may be available in the new MBA online store at Gear Racks - 48DP - Stainless.


Gear Racks - 64DP - Stainless
Gear Racks -  64DP - Stainless

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 64 DP. Approx 1.25mm between teeth. This category may be available in the new MBA online store at Gear Racks - 64DP - Stainless.





Main Pages

About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form McMaster Carr Cross Reference PDF Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 135332 products in 2018 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 135332 products in 2018 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.