Small Parts & Bearings - an MBA company

GN13755 ONDRIVES


Cross Referenced Part Numbers



SS120M-0500-AS-AT Ondrives part number GN.13755



Description: Thread Size: M12x1.75 (12mm Standard). Thread Length (L): 50.0. Type: Acetal Tipped.

Rec. Retail Price: 0.00     
Stock: Pre-Order (about 8 weeks)     



SS120M-0500-AS-AT Ondrives part number GN.13755



Description: Thread Size: M12x1.75 (12mm Standard). Thread Length (L): 50.0. Type: Acetal Tipped.

Rec. Retail Price: 0.00     
Stock: Pre-Order (about 8 weeks)     


Category Matches

Gearbox Parts


P30-60 Ondrives Parts
P30-60 Ondrives Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Couplings Helical and Slit


Couplings - Helical - Short - Ondrives
Couplings - Helical - Short - Ondrives

Also see combined categories:
All Helical and Slit Couplings

Material: 303 S3U Stainless.

Related Information:


Magno 634 Kavo Parts
Magno 634 Kavo Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Magnets - Alcomax - Cylindrical Bar
Magnets - Alcomax - Cylindrical Bar

Also see combined categories:
All Magnets
All Alcomax Magnets

No keepers



Magnets - Alcomax - Power
Magnets - Alcomax - Power

Also see combined categories:
All Magnets
All Alcomax Magnets

Supplied with keeper



Magnets - Alcomax - Rectangular Bar
Magnets - Alcomax - Rectangular Bar

Also see combined categories:
All Magnets
All Alcomax Magnets

No keepers



Magnets - Alnico - Bar
Magnets - Alnico - Bar

Also see combined categories:
All Magnets
All Alnico Magnets

Cast Alnico 5 bar



Magnets - Alnico - Button
Magnets - Alnico - Button

Also see combined categories:
All Magnets
All Alnico Magnets

Supplied with keeper



Magnets - Alnico - Horseshoe
Magnets - Alnico - Horseshoe

Also see combined categories:
All Magnets
All Alnico Magnets

General purpose horseshoe magnet



Magnets - Alnico - Minor Magnet
Magnets - Alnico - Minor Magnet

Also see combined categories:
All Magnets
All Alnico Magnets

Supplied with keeper



Magnets - Alnico - Pocket Magnet
Magnets - Alnico - Pocket Magnet

Also see combined categories:
All Magnets
All Alnico Magnets

Supplied with keeper



Magnets - Alnico - Ring
Magnets - Alnico - Ring

Also see combined categories:
All Magnets
All Alnico Magnets

Cast Alnico 5



Magnets - Alnico - Rod - Sintered
Magnets - Alnico - Rod - Sintered

Also see combined categories:
All Magnets
All Alnico Magnets

Alnico sintered ASA 8HC


Related Information:


Magnets - Alnico - Shielded
Magnets - Alnico - Shielded

Also see combined categories:
All Magnets
All Alnico Magnets



Magnets - Alnico - Side Pole Rotator
Magnets - Alnico - Side Pole Rotator

Also see combined categories:
All Magnets
All Alnico Magnets



Magnets - Ceramic - 2 Pole - Insulated Aluminium - Press Fit
Magnets - Ceramic - 2 Pole - Insulated Aluminium - Press Fit

Also see combined categories:
All Magnets
All Ceramic Magnets

Extended poles can be lightly machined. Press fit. Insulated aluminium casing.

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole
Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole

Also see combined categories:
All Magnets
All Ceramic Magnets

Extended poles can be lightly machined. With tapped blind hole in base for mounting. Insulated aluminium casing.

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Magnets - Ceramic Blocks
Magnets - Ceramic Blocks

Also see combined categories:
All Magnets
All Ceramic Magnets

Low cost, light weight, high energy material

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Magnets - Ceramic Cylinder
Magnets - Ceramic Cylinder

Also see combined categories:
All Magnets
All Ceramic Magnets

Low cost, light weight, high energy material

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Magnets - Ceramic Ring
Magnets - Ceramic Ring

Also see combined categories:
All Magnets
All Ceramic Magnets



Magnets - Cup Assemblies - Clips
Magnets - Cup Assemblies - Clips

Also see combined categories:
All Magnets
All Cup Magnets



Magnets - Cup Assemblies - Loop
Magnets - Cup Assemblies - Loop

Also see combined categories:
All Magnets
All Cup Magnets

Ideal for hanging signs and lights, retrieving steel items from tanks, vats, bins etc.

Plated cup with a 9.525mm ID loop.


Magnets - Cup Assemblies - Stud
Magnets - Cup Assemblies - Stud

Also see combined categories:
All Magnets
All Cup Magnets



Magnets - Cup Assemblies - Through Hole
Magnets - Cup Assemblies - Through Hole

Also see combined categories:
All Magnets
All Cup Magnets



Magnets - Rare Earth - Plated
Magnets - Rare Earth - Plated

Also see combined categories:
All Magnets
All Rare Earth Magnets

Incredibly strong attraction and repulsion. Neodymium-Iron-Boron encased in nickel jackets to protect the brittle magnet material and prevent corrosion.

High strength to weight ratios. Commonly used in miniature applications such as linear actuators, sensing applications, gyroscopes, flow meters, recording devices, pacemakers and alternators. Temperature range -73 oC to 93 oC. Size tolerances +/- 0.13.


Magnets - Rare Earth - Shielded
Magnets - Rare Earth - Shielded

Also see combined categories:
All Magnets
All Rare Earth Magnets

Insulator shield prevents loss of magnetic flux when inserted into steel components or fixtures

Shielded magnets supply holding forces in limited areas of steel tools, dies and fixtures.


Magnets - Rubber and Vinyl
Magnets - Rubber and Vinyl

Also see combined categories:
All Magnets

Magnetic Vinyl Sheets and Magnetic Rubber Strip



Catches - Magnetic - Screw On
Catches - Magnetic - Screw On


Various styles - refer pictures



Catches - Magnetic - Ultra Thin - Heavy Duty
Catches - Magnetic - Ultra Thin - Heavy Duty


Ultra thin strong magnetic catch is perfect for tight areas. Has a full 4kg of magnetic force.


Related Information:


Catches - Magnetic - Ultra Thin - Light Duty
Catches - Magnetic - Ultra Thin - Light Duty


Ultra thin strong magnetic catch is perfect for tight areas. Has 2.5 kg of magnetic force.


Related Information:


Clutches - Magnetic Particle 24VDC
Clutches - Magnetic Particle 24VDC

Also see combined categories:
All Magnetic Clutches

Ultrafast Responses.

The input shaft becomes coupled to the output shaft with electrical excitation. Shafts have a flat on the end. Soft or fast start.

Related Information:


Washers - Self Aligning - Sets - Plastic
Washers - Self Aligning - Sets - Plastic

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers

Tensile strengths shown are Static Axial in Newtons. Easy to install. Good friction wear properties.

Related Information:


Washers - Self Aligning - Components - Hardened Steel
Washers - Self Aligning - Components - Hardened Steel

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers. Washer A (aligning) and washer B (seat) sold separately.

Hardened steel 9 S Mn Pb 28 K DIN 6319. Order a base washer and an aligning washer to make a complete unit. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.


Washers - Self Aligning - Components - Stainless Steel
Washers - Self Aligning - Components - Stainless Steel

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers. Washer A (aligning) and washer B (seat) sold separately.

AISI 303 Stainless Steel. Order a base washer and an aligning washer to make a complete unit. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.


Washers - Self Aligning - Sets - Hardened Steel
Washers - Self Aligning - Sets - Hardened Steel

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers

Hardened steel 9 S Mn Pb 28 K DIN 6319. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.


Washers - Self Aligning - Sets - Stainless Steel
Washers - Self Aligning - Sets - Stainless Steel

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers

AISI 303 Stainless Steel. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.


Clutches - Slip - Magnetic Particle - Integral Shaft - No Power
Clutches - Slip - Magnetic Particle - Integral Shaft - No Power

Also see combined categories:
All Slip Clutches

Requires no power.

Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. See PDF sheet at bottom of this page.

Related Information:


Clutches - Slip - Magnetic Particle - No Power
Clutches - Slip - Magnetic Particle - No Power

Also see combined categories:
All Slip Clutches

Requires no power.

Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. See PDF sheet at bottom of this page.

Related Information:


Plastic Bearing Oliver Design - Xyratex Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Housings - Flanged - Self Aligning - Bronze - Heavy Duty
Housings - Flanged - Self Aligning - Bronze - Heavy Duty

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with self aligning bronze bearings.

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Related Information:


Housings - Flanged - Self Aligning - Heavy Duty - Delrin AF -tm-
Housings - Flanged - Self Aligning - Heavy Duty - Delrin AF -tm-

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo low profile self aligning flange mounted acetal Delrin AF bearings

See links at bottom of web page for more information. +/- 5% Static Alignment.

Related Information:


Housings - Flanged - Self Aligning - Heavy Duty - Delrin -tm-
Housings - Flanged - Self Aligning - Heavy Duty - Delrin -tm-

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo low profile self aligning flange mounted acetal Delrin bearings

See links at bottom of web page for more information. +/- 5% Static Alignment.

Related Information:


Housings - Flanged - Self Aligning - Needle Roller
Housings - Flanged - Self Aligning - Needle Roller

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with self aligning needle roller bearings

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Related Information:


Bearings - Ceramic ZrO2 - Self Aligning - Double Row
Bearings - Ceramic ZrO2 - Self Aligning - Double Row

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:


Bearings - Press-Fit - Self Aligning - Delrin -tm-
Bearings - Press-Fit - Self Aligning - Delrin -tm-

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo acetal bearings in specially designed press fit retainers

See links at bottom of web page for more information. +/- 5% Static Alignment. Use punch of min dia. J relieved to dia. K x 2mm deep. Refer datasheet for dia. K and J. Link at bottom of web page.

Related Information:


Bearings - Press-Fit - Self Aligning - Sintered Bronze
Bearings - Press-Fit - Self Aligning - Sintered Bronze

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo sintered bronze bearings in specially designed press fit retainers

See links at bottom of web page for more information. +/- 5% Static Alignment. Use punch of min dia. J relieved to dia. K x 2mm deep. Refer datasheet for dia. K and J. Link at bottom of web page.

Related Information:


Bearings - Self Clinching - Self Aligning - Delrin -tm-
Bearings - Self Clinching - Self Aligning - Delrin -tm-

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo acetal bearings in a special steel self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:


Bearings - Self Clinching - Self Aligning - Needle Roller
Bearings - Self Clinching - Self Aligning - Needle Roller

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:


Bearings - Self Clinching - Self Aligning - Sintered Bronze
Bearings - Self Clinching - Self Aligning - Sintered Bronze

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo sintered bronze bearing in a special self-clinching steel housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124353 products in 2772 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124353 products in 2772 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.