Small Parts & Bearings - an MBA company

Gl30 Reid


Cross Referenced Part Numbers



MLV-0110-0953C-IN-B Reid part number GL-30

Matches our part number
MLV-0110-0953C-IN-B
(Click item to order)

Description: Max Load: 110. Thread A: 3/8-16 UNC (9.525mm). Base Diameter (B): 60.960.

Group: Mounts - Leveling - Steel - Industrial - With Nylon Pad

Stock: Backorder  


Category Matches

Universal Joints Single


Universal Joints - Single Joint - Hobby
Universal Joints - Single Joint - Hobby

Also see combined categories:
All Universal Joints
All Single Joint Universals

C45 Carbon Steel. Maximum operating angle 30 degree. Slow speed only.


Knobs Knurled


Knobs - Knurled - Torque - Female
Knobs - Knurled - Torque - Female

Also see combined categories:
All Knurled Knobs
All Knobs

Plastic (high grade gloss black phenolic) Knob. Temperature Range: -30oC to +140oC.


Knobs Thumb


Knobs - Thumb - Female
Knobs - Thumb - Female

Also see combined categories:
All Thumb Knobs
All Knobs

Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30oC to +140oC.


Knobs Wing


Knobs - Wing - Male
Knobs - Wing - Male

Also see combined categories:
All Wing Knobs
All Knobs

Plastic (high grade gloss black phenolic) with Steel Insert. Temperature Range: -30oC to +140oC.


Knobs - Wing - Female - Contoured
Knobs - Wing - Female - Contoured

Also see combined categories:
All Wing Knobs

Plastic (high grade gloss black phenolic) with Steel Insert. Temperature Range: -30oC to +140oC.


Universal Joints Single


Universal Joints - Single Joint - High Speed - Plain Bore - Stainless
Universal Joints - Single Joint - High Speed - Plain Bore - Stainless

Also see combined categories:
All Universal Joints
All Single Joint Universals

303 Stainless Body with 440 Stainless Balls. Maximum operating angle 30 degrees (45 for hand operated applications). Zero backlash. Sealed lubrication. Light weight and low inertia. Not supplied with set screws or tapped holes.

Related Information:
Covers For Uni Joints

Knobs Star


Knobs - Star - Female - Plastic
Knobs - Star - Female - Plastic

Also see combined categories:
All Star Knobs

Also see lobe knobs

Plastic (high grade gloss black phenolic) knob with steel insert. Temperature Range: -30oC to +140oC.


Knobs - Star - Male - Plastic
Knobs - Star - Male - Plastic

Also see combined categories:
All Star Knobs
All Knobs

Also see lobe knobs

Plastic (high grade gloss black phenolic) knob with steel insert. Temperature Range: -30oC to +140oC.


You may also like

Bearings Hydrodynamic


Bearings - Hydrodynamic Pressure
Bearings - Hydrodynamic Pressure

Alternative to ball bearings - quiet operation - patented design.

Applications include compact fan motors, copy machines, printers, laptop computers, cameras and toys. Stainless Steel casing and shield - Long Life. Use with Case Hardened shafting 2um surface finish -0.007/-0.012 for normal use. Use with Case Hardened shafting 1um surface finish -0.005/-0.007 for high accuracy use. 30% weight savings over ball bearings.

Related Information:
Technical Info
Precision Shafting To Suit Bearings

Knobs Lever


Knobs - Lever
Knobs - Lever

Also see combined categories:
All Levers
All Knobs

Lever knobs with moulded female threads, ideal for direct attachment to operating levers. Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30oC to +140oC. All knobs are fitted with a brass female insert.


O-Rings


O-Rings - Cord
O-Rings - Cord

Nitrile, Fluoroelastomer and EPDM continuous length o-ring cord.

Nitrile: Temp Range: -30oC to +90oC / Fluoroelastomer: Temp Range -20oC to +240oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Nitrile: Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. Fluoroelastomer (Viton(R)): Suitable for synthetic and hydraulic fluids, strong acids, steam, many chemicals and many alkalis.


O-Rings - Nitrile Rubber
O-Rings - Nitrile Rubber

Also see combined categories:
All O-Rings

General purpose. Includes o-rings for dental handpiece applications.

Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.

Related Information:
U Groove Pulleys

Bearings Mounted


Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning
Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning

Also see combined categories:
All Press In Bearings

Fitted with drawn cup needle bearing. -30 to 110 oC. Retainer : Carbon Stee black oxide finish. Shafts must be hardened to Rc 58 with 0.8um surface finish or finer. Non aligning.

Related Information:
Precision Shafting To Suit Bearings

Couplings Insert and Jaw


Couplings - Spline Type - Complete
Couplings - Spline Type - Complete

Also see combined categories:
All Insert and Jaw Type Couplings

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Related Information:
Shafting

Couplings - Spline Type - Spare Hubs
Couplings - Spline Type - Spare Hubs

Also see combined categories:
All Insert and Jaw Type Couplings

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Related Information:
Shafting

Couplings - Spline Type - Spare Poyurethane Splines
Couplings - Spline Type - Spare Poyurethane Splines

Also see combined categories:
All Insert and Jaw Type Couplings

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Related Information:
Shafting

Protective Packing and Sleeves


Sleeving - Mesh
Sleeving - Mesh

Low cost protection for exterior threaded and cylindrical parts

Elastic snug tight fit on straight, tapered or contoured parts. Made from polyethylene. Thickness of web approx 1.8mm. Sold per foot (300mm). Maximum contunuous roll is 100 feet (30 mtrs).


Bearings Acetal


Bearings - Acetal - Double Row - with Glass Balls
Bearings - Acetal - Double Row - with Glass Balls

Also see combined categories:
All Plastic Ball Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:
Tolerances for acetal Bearings
Acetal Bearings with 316 Stainless Steel Balls
Acetal Properties

Bearings - Acetal - Single Row - with Glass Balls
Bearings - Acetal - Single Row - with Glass Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:
Tolerances for acetal Bearings
Acetal Bearings with 316 Stainless Steel Balls
Acetal Properties

O-Rings


O-Rings - Quad
O-Rings - Quad

Also see combined categories:
All O-Rings

Quadrings or quattrorings reduce the amount of squeeze needed for positive seal, reducing friction and extending seal life.

Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. Also known as quad rings.


Bearings Acetal


Bearings - Acetal - Single Row - with 302 Stainless Steel Balls
Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:
Tolerances for acetal Bearings
Acetal Bearings with Glass Balls
Acetal Properties

Bearings - Acetal - Single Row - with 316 Stainless Steel Balls
Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:
Tolerances for acetal Bearings
Acetal Bearings with Glass Balls
Acetal Properties

Spring Motors


Spring Motor Assemblies - Open - RINO
Spring Motor Assemblies - Open - RINO

Also see combined categories:
All Spring Motors

Budget Assemblies. Average fatigue life of 5000 to 30000 cycles.

Springs : 301 Stainless Steel. Average fatigue life of 5,000 to 30,000 cycles.


Knobs Push Pull


Knobs - Push-Pull
Knobs - Push-Pull

Contoured knobs plated Steel threaded female inserts. Fitted with generous dome to shank ratios to accommodate both push and pull operations. Temperature Range: -30oC to +140oC.


Linear Slides


Slides - Linear - Clean Room
Slides - Linear - Clean Room

Also see combined categories:
All Linear Slides

Stainless Steel throughout (similar to 440C). Speed: 0.5 m/sec (30 m/min). Temperature: +100oC (Continuous), +140oC (Maximum). Life will be less than normal at +100oC and dimensions may change. Lateral Loading: Dynamic x 1.13 C - Static x 1.19 Co. Precision Linear Slide Unit is a compact linear motion rolling guide for limited stroke length.


Gearboxes Inline Epicyclic


Gearboxes - Inline - Epicyclic - 160.0 x 135.0mm
Gearboxes - Inline - Epicyclic - 160.0 x 135.0mm

Also see combined categories:
All Inline Epicyclic Gearboxes

Servo Gearbox 180Nm to 380Nm ratios 3:1 - 6:1. EHD16 Series.

Case: Steel. Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 18.86kg Backlash: 30'. Max Input Speed: 2,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV.

Related Information:
Inexpensive Gearmotor Kits

Gearboxes - Inline - Epicyclic - 134.0 x 108.0mm
Gearboxes - Inline - Epicyclic - 134.0 x 108.0mm

Also see combined categories:
All Inline Epicyclic Gearboxes

Servo Gearbox 60Nm to 140Nm ratios 3:1 - 6:1. EHD12 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Backlash: 30'. Max Input Speed: 3,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV.

Related Information:
Inexpensive Gearmotor Kits

Oil Seals


Oil Seals - Nitrile Rubber
Oil Seals - Nitrile Rubber

Also see combined categories:
All Oil Seals

DIN 3760 - General purpose grease and oil sealing. Note - metal cased and rubber cased seals may be interchanged at our discretion. If one or the other is specifically required please let us know when ordering.

Operating Temp. Range: -30oC to +90oC. The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.


Gearboxes Inline Epicyclic


Gearboxes - Inline - Epicyclic - 57.0 x 45.0 x 45.0mm
Gearboxes - Inline - Epicyclic -  57.0 x  45.0 x  45.0mm

Also see combined categories:
All Inline Epicyclic Gearboxes

Servo Gearbox 3.4Nm to 7Nm ratios 3:1 - 6:1. EHD04 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 0.44kg Backlash: 30'. Max Input Speed: 4,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV.

Related Information:
Inexpensive Gearmotor Kits

Gearboxes - Inline - Epicyclic - 78.0 x 60.0 x 60.0mm
Gearboxes - Inline - Epicyclic -  78.0 x  60.0 x  60.0mm

Also see combined categories:
All Inline Epicyclic Gearboxes

Servo Gearbox 8Nm to 19Nm ratios 3:1 - 6:1. EHD06 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 0.96kg Backlash: 30'. Max Input Speed: 4,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV.

Related Information:
Inexpensive Gearmotor Kits

Gearboxes - Inline - Epicyclic - 80.0 x 75.0 x 75.0mm
Gearboxes - Inline - Epicyclic -  80.0 x  75.0 x  75.0mm

Also see combined categories:
All Inline Epicyclic Gearboxes

Servo Gearbox 20Nm to 50Nm ratios 3:1 - 6:1. EHD08 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 1.4kg Backlash: 30'. Max Input Speed: 4,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV.

Related Information:
Inexpensive Gearmotor Kits

Springs Die


Springs - Die - Imperial - Medium-Heavy Duty
Springs - Die - Imperial - Medium-Heavy Duty

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded red. Efficient operating range is 20 to 30 percent of the length. Maximum deflection is 37 percent of the length.


Springs - Die - Imperial - Heavy Duty - Chrome Silicon
Springs - Die - Imperial - Heavy Duty - Chrome Silicon

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded gold. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 30 percent of the length.


Bearings Acetal


Bearings - Acetal - Double Row - with 316 Stainless Steel Balls
Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:
Tolerances for acetal Bearings
Acetal Bearings with Glass Balls
Acetal Properties

Gearboxes Inline Epicyclic


Gearboxes - Inline - Epicyclic - 115.0 x 75.0 x 75.0mm
Gearboxes - Inline - Epicyclic - 115.0 x  75.0 x  75.0mm

Also see combined categories:
All Inline Epicyclic Gearboxes

Servo Gearbox 35Nm to 50Nm ratios 9:1 - 36:1. EHD08 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gears: Steel EN36 655M13 EN24T 817M40T. Weight: 2.1kg Backlash: 1o30'. Max Input Speed: 4,000 Rpm (short term). Lubrication: Greased for life - Shell Nerita Grease HV.

Related Information:
Inexpensive Gearmotor Kits

Suspension Units


Suspension Units - Rubber - Square - Insert Type
Suspension Units - Rubber - Square - Insert Type

Also see combined categories:
All Suspension Units

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.


Springs Die


Springs - Die - Imperial - Heavy Duty
Springs - Die - Imperial - Heavy Duty

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length.


Gearboxes Inline


Gearboxes - Inline - 50 x 40mm Hi Torque
Gearboxes - Inline -  50 x  40mm Hi Torque

Also see combined categories:
All Inline Gearboxes

JHD51 Series.

Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3o - 6o. Approx Motion: JHD51-10 = 2o30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Gearboxes - Inline - 50 x 30mm
Gearboxes - Inline -  50 x  30mm

Also see combined categories:
All Inline Gearboxes

J51 Series.

End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3o - 6o. Approx Motion: J51-10 = 2o30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Ondrives Gearbox Selection and Technical
Inexpensive Gearmotor Kits

Mounts Leveling


Mounts - Leveling - 303 Stainless - Industrial - With Acetal Pad
Mounts - Leveling - 303 Stainless - Industrial - With Acetal Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

These industrial glides are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery. Adjusters.

303 Stainless Steel. Nylon pad for glide applications.


Gearboxes Right Angle


Gearboxes - Right Angle - Model RA 3000-2000-2000 -300.0 x 200.0 x 200.0mm
Gearboxes - Right Angle - Model RA 3000-2000-2000 -300.0 x 200.0 x 200.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 215 Nm-550 Nm ratios 6:1 to 24:1. BLN70 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.


Gearboxes - Right Angle - Model RA 0305-0305-0187 - 30.5 x 30.5 x 18.7mm
Gearboxes - Right Angle - Model RA 0305-0305-0187 - 30.5 x  30.5 x 18.7mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 1:1 Ratio. B332 Series. Miniature gearbox.

1:1 Ratio Only / 4mm Shafts. Min Torque 0.5 Ncm. Backlash Approx 2o. Approx Max Temperature 80 oC. Suitable for manual and short term drive application.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts & Bearings offers 126278 products in 2936 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts & Bearings offers 126278 products in 2936 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.