Small Parts & Bearings - an MBA company

GELMK15 IGUS


Cross Referenced Part Numbers



CLJ-15.00-M14L Igus part number GELMK-15





Hole Dia. (d1): 15.0. Depth from Centre (g): 28.0. Top Width (a1 x a2): 27.0 x 27.0.

Online Price: 0.00     
Stock: Pre-Order (due 12 weeks)     
Due dates are estimates only     


Category Matches

Housings with Bearing


Housings - Bearing - Pillow Block - Thermoplastic - W300
Housings - Bearing - Pillow Block - Thermoplastic - W300

Also see combined categories:
All Housings with Integral Bearing

Iglide L280 / Igus W300 Ball with Thermoplatic Body.

Maintenance Free, Lightweight, Self-Lubricating. Compensates for alignment errors. Temperature Range -40 oC to +130 oC. Max. Static Tensile Strength is Long Term. Info for Short Term also available.


Housings - Igubal - Sliding
Housings - Igubal - Sliding

Also see combined categories:
All Housings with Integral Bearing

Housing: Aluminium. Insert: Sliding film Iglidur(R) J. Tolerance for the Shaft: h7. Use with Drylin aluminium shafts.

Related Information:


Shafting - Aluminium
Shafting - Aluminium

Also see combined categories:
All Shafting
All Aluminium Shafting

Drylin aluminium shafting is recommended for use with Igubal Drylin bearings or Frelon lined bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.


Housings - Bearing - Flanged - Square - W300
Housings - Bearing - Flanged - Square - W300

Also see combined categories:
All Housings with Integral Bearing

With integral self aligning plain bearing.

Housing : Igumid G. Ball : Highly wear resistant Iglidur W300. Temperature range -40 oC to +180 oC.


Housings - Bearing - Flanged - 2 Bolt Hole - W300
Housings - Bearing - Flanged - 2 Bolt Hole - W300

Also see combined categories:
All Housings with Integral Bearing

With integral self aligning plain bearing.

Housing: Igumid G. Ball: Highly wear resistant Iglidur W300.


Spring Motor Assemblies - Open - RINO
Spring Motor Assemblies - Open - RINO

Also see combined categories:
All Spring Motors

Budget Assemblies. Average fatigue life of 5000 to 30000 cycles.

Springs : 301 Stainless Steel. Average fatigue life of 5,000 to 30,000 cycles.


Mounts - Leveling - Socket Type - Black
Mounts - Leveling - Socket Type - Black

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - Steel
Mounts - Leveling - Socket Type - Steel

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Nickel Plated Steel. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - 303 Stainless Steel
Mounts - Leveling - Socket Type - 303 Stainless Steel

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - Gold Chromate 2
Mounts - Leveling - Socket Type - Gold Chromate 2

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - Steel - Black Chromate
Mounts - Leveling - Socket Type - Steel - Black Chromate

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - Steel - Clear Chromate
Mounts - Leveling - Socket Type - Steel - Clear Chromate

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - Steel - Gold Chromate
Mounts - Leveling - Socket Type - Steel - Gold Chromate

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - Steel - Nickel Plated
Mounts - Leveling - Socket Type - Steel - Nickel Plated

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - With Lag Holes
Mounts - Leveling - Socket Type - With Lag Holes

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Lag holes alow base to be secured. Adjusters.

Hardened ball prevents galling and forms it's own seat. Large diameter pad design assures solid support. Zinc plated with gold chromate finish.

Related Information:


Mounts - Leveling - Stud Type - 303 Stainless Steel
Mounts - Leveling - Stud Type - 303 Stainless Steel

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - 316 Stainless Steel
Mounts - Leveling - Stud Type - 316 Stainless Steel

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - Steel - Black Chromate
Mounts - Leveling - Stud Type - Steel - Black Chromate

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - Steel - Clear Chromate
Mounts - Leveling - Stud Type - Steel - Clear Chromate

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - Steel - Gold Chromate
Mounts - Leveling - Stud Type - Steel - Gold Chromate

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - Steel - Nickel Plated
Mounts - Leveling - Stud Type - Steel - Nickel Plated

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - With Lag Holes
Mounts - Leveling - Stud Type - With Lag Holes

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Lag holes alow base to be secured. Adjusters.

Hardened ball prevents galling and forms it's own seat. Large diameter pad design assures solid support. Zinc plated with gold chromate finish.

Related Information:


Mounts - Leveling - Socket Type - 303 Stainless Steel 2
Mounts - Leveling - Socket Type - 303 Stainless Steel 2

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - 303 Stainless - With Pad
Mounts - Leveling - Socket Type - 303 Stainless - With Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - 316 Stainless - With Pad
Mounts - Leveling - Socket Type - 316 Stainless - With Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - Steel - Gold Chromate 2
Mounts - Leveling - Socket Type - Steel - Gold Chromate 2

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - 303 Stainless Steel - Padded
Mounts - Leveling - Stud Type - 303 Stainless Steel - Padded

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - 316 Stainless Steel - Padded
Mounts - Leveling - Stud Type - 316 Stainless Steel - Padded

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - Steel - Black Chromate - Padded
Mounts - Leveling - Stud Type - Steel - Black Chromate - Padded

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - Steel - Clear Chromate - Padded
Mounts - Leveling - Stud Type - Steel - Clear Chromate - Padded

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - Steel - Gold Chromate - Padded
Mounts - Leveling - Stud Type - Steel - Gold Chromate - Padded

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - Steel - Nickel Plated - Padded
Mounts - Leveling - Stud Type - Steel - Nickel Plated - Padded

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - 303 Stainless - With Acetal Pad
Mounts - Leveling - Socket Type - 303 Stainless - With Acetal Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - Steel - Black Chromate - With Pad
Mounts - Leveling - Socket Type - Steel - Black Chromate - With Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - Steel - Clear Chromate - With Pad
Mounts - Leveling - Socket Type - Steel - Clear Chromate - With Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - Steel - Gold Chromate - With Pad
Mounts - Leveling - Socket Type - Steel - Gold Chromate - With Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - Steel - Nickel Plated - With Pad
Mounts - Leveling - Socket Type - Steel - Nickel Plated - With Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - 303 Stainless Steel - Acetal Base
Mounts - Leveling - Stud Type - 303 Stainless Steel - Acetal Base

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - Steel - Gold Chromate - Acetal Base
Mounts - Leveling - Stud Type - Steel - Gold Chromate - Acetal Base

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Circlips - Internal - Bevelled
Circlips - Internal - Bevelled

Also see combined categories:
All Internal Circlips

N1302 / VHO / 16631 / 9002 / N5002. Retaining rings. Snap Rings (USA).

A 15 Deg. bevel on the outside diameter to be fitted to a 15% bevel on the load bearing groove wall. Will yield rigid end-play take-up of manufacturing tolerances or wear on the retained part. Used in greasy or oily environments.

Related Information:


Pins - Clevis - Handle - Bent
Pins - Clevis - Handle - Bent

Also see combined categories:
All Clevis Pins with Handle
All Clevis Pins

Also known as Hitch Pins. Heat treated.

Bent at a 15o angle.

Related Information:


Mounts - Leveling - Stud Type - Stainless Steel - Imperial
Mounts - Leveling - Stud Type - Stainless Steel - Imperial

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Good quality with value pricing. 303 stainless steel. Adjusters.

Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.

Related Information:


Mounts - Leveling - Stud Type - Stainless Steel - Metric
Mounts - Leveling - Stud Type - Stainless Steel - Metric

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Good quality with value pricing. 303 stainless steel. Adjusters.

Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.

Related Information:


Mounts - Leveling - Anti-Vibration - Studded Type
Mounts - Leveling - Anti-Vibration - Studded Type

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Specifically designed to provide low frequency vibration isolation, leveling and shock attenuation for electronics and machinery. Adjusters.

15o swivel off centre to adjust to uneven surfaces. over 12mm of black neoprene permanently bonded to the base. Neoprene operating temperature -20 to 80 oC. Steel parts are zinc plated with black chromate finish.

Related Information:


Mounts - Leveling - Stud Type - Gold Chromate - Imperial
Mounts - Leveling - Stud Type - Gold Chromate - Imperial

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics. Adjusters.

Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.

Related Information:


Mounts - Leveling - Stud Type - Gold Chromate - Metric
Mounts - Leveling - Stud Type - Gold Chromate - Metric

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics. Adjusters.

Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.

Related Information:


Mounts - Leveling - Stud Type - Nickel Plated - Imperial
Mounts - Leveling - Stud Type - Nickel Plated - Imperial

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics. Adjusters.

Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.

Related Information:


Mounts - Leveling - Stud Type - Nickel Plated - Metric
Mounts - Leveling - Stud Type - Nickel Plated - Metric

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics. Adjusters.

Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.

Related Information:


Springs - Die - Imperial - Heavy Duty - Chrome Silicon
Springs - Die - Imperial - Heavy Duty - Chrome Silicon

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded gold. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 30 percent of the length.

Related Information:


Springs - Die - Imperial - Heavy Duty
Springs - Die - Imperial - Heavy Duty

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length.

Related Information:


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 127134 products in 2361 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 127134 products in 2361 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.