Small Parts & Bearings - an MBA company

Covid-19 Update!! Current supply status.

Trading by online order and email.
Outbound Deliveries: Allow a few extra days within Australia and extra 7 days for overseas deliveries.
Pre-orders and Backorders: Allow extra 7 days due to quarantine precautions.
Distributors: Most MBA distributors are open and able to contact us using the distributor phone line.

Hospitals, medical equipment repairs and manufacture and bio research teams please email us if you need emergency contacts for equipment spare parts.

Gears spur 32dp hub mounting aluminium categories


Gear Racks Flexible


Gear Racks - Flexible - Guide Rails
Gear Racks - Flexible - Guide Rails

Also see combined categories:
All Flexible Gear Racks

For mounting flexirack. Flexible nylon or rigid aluminium guide rails.

Longer lengths in Nylon available on special order. For easy ready selected sets of rack and gear please see the HES website.


You may also be interested in

Mounts Leveling


Mounts - Leveling - Machine - Cushioned
Mounts - Leveling - Machine - Cushioned

Also see combined categories:
All Mounting Feet

Reduces noise and vibration on heavy machinery, compressors and presses. Adjusters.

High strength aluminium alloy mounting plate is embedded in each pad with two tapped mounting holes for installation on all types of machines. The elastomer compound used in these pads is highly resistant to oil and chemicals. 1/2 UNC thread cold forged x 2.5 inch bolt supplied with each mount. Thousands of tiny suction pockets on the bottom prevent the machine from walking or slipping out of position.

Related Information:


Gears Metric Spur


Gears - Spur - Module 0.5 - Aluminium
Gears - Spur - Module 0.5 - Aluminium

Also see combined categories:
All Module 0.5 Spur Gears
All Metal Module 0.5 Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. 2024 aluminium

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - Module 0.8 - Aluminium
Gears - Spur - Module 0.8 - Aluminium

Also see combined categories:
All Module 0.8 Spur Gears
All Metal Module 0.8 Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. 2024 aluminium

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears Inch Spur


Gears - Spur - 64DP - Aluminium
Gears - Spur -  64DP - Aluminium

Also see combined categories:
All 64DP Spur Gears
All Metal 64DP Spur Gears

PCD = No. of Teeth x 0.397mm (1/64 in.). 20o Pressure Angle. 5052 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 72DP - Aluminium
Gears - Spur -  72DP - Aluminium

Also see combined categories:
All 72DP Spur Gears
All Metal 72DP Spur Gears

PCD = No. of Teeth x 0.353mm (1/72 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 48DP - 20 Degree - Aluminium
Gears - Spur -  48DP - 20 Degree - Aluminium

Also see combined categories:
All 48DP Spur Gears 20 Degree
All 48DP Spur Gears 20 Degree Metal

PCD = No. of Teeth x 0.529mm (1/48 in.). 20o Pressure Angle. 2024 and 5052 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 72DP - Differential End - Aluminium
Gears - Spur -  72DP - Differential End - Aluminium

Also see combined categories:
All 72DP Spur Gears

To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Rollers - Urethane Feed - With Hub
Rollers - Urethane Feed - With Hub

Also see combined categories:
All Tyred OD Bearings
All Rollers

Urethane coated aluminium alloy feed rollers with hub.

Roller - Urethane 60 Durometer, Ground Outside Diameter. Sleeve - Aluminium.

Related Information:


Couplings - Double Disk - Aluminium
Couplings - Double Disk - Aluminium


Zero Backlash - High Torsional Stiffness.

Hub and Spacer: Aluminium Alloy. Pin and Disc: Stainless Steel. Max Axial Play: +/-0.5mm. 0.7 to 12.5 Nm. 3000 to 19000 rpm.

Related Information:


Gearheads - Inline - Planetary - Size 17 - Precision
Gearheads - Inline - Planetary - Size  17 - Precision

Also see combined categories:
All Inline Planetary Gearheads

Use with NEMA Size 17 Motors.

Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 25.4kg (57 lbs) radial and 24.5kg (55 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).

Related Information:


Rail Supports - Without Shaft
Rail Supports - Without Shaft

Also see combined categories:
All Shaft Supports

For mounting of linear shafting.

Shafting sold separately. Support is made from aluminium.

Related Information:


Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole
Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole

Also see combined categories:
All Magnets
All Ceramic Magnets

Extended poles can be lightly machined. With tapped blind hole in base for mounting. Insulated aluminium casing.

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Couplings - Sleeve Type - Hubs
Couplings - Sleeve Type - Hubs


0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:


Couplings - Sleeve Type - Sleeves
Couplings - Sleeve Type - Sleeves


0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:


Inserts - Self Tapping - For Aluminium - Stainless 303
Inserts - Self Tapping - For Aluminium - Stainless 303

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Related Information:


Inserts - Self Tapping - For Aluminium - Steel
Inserts - Self Tapping - For Aluminium - Steel

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Related Information:


Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 10mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:


Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 16mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:


Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 25mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:


Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock
Pulleys - Timing -  2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.

Aluminium Alloy. EZI-LOK Hub Clamps together wit a Socket Head Cap Screw. Socket Cap Screw is Supplied with Pulley.

Related Information:


Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - EZ-Lock
Pulleys - Timing -  3.000mm Pitch - GT2 -  9mm Wide - EZ-Lock

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide.

Aluminium Alloy. EZ-Lock hub clamps to the shaft with a socket head cap screw. Cap screw is supplied with the pulley.

Related Information:


Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Through Bore
Pulleys - Timing -  2.000mm Pitch - GT2 - 6mm Wide - Through Bore

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.

Aluminium Alloy. Set Screw and EZI-LOK Hubs.

Related Information:


Gearboxes - Cross Axis - 150 x 96 x 96 A
Gearboxes - Cross Axis - 150 x  96 x  96 A

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 25mm Bores. E60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Related Information:


Pulleys - Timing - 5.000mm Pitch - T5 - 10mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - T5 - 10mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 9.5 to 10.0mm wide.

Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.

Related Information:


Pulleys - Timing - 5.000mm Pitch - T5 - 16mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - T5 - 16mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 15.0 to 16.0mm wide.

Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.

Related Information:


Pulleys - Timing - 5.000mm Pitch - T5 - 25mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - T5 - 25mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 25.0mm to 25.4mm wide.

Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.

Related Information:


Snaps - Swivel Eye - Aluminium
Snaps - Swivel Eye - Aluminium

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy



Linear Slides - Utilitrak - PW - Crowned - Channel - Aluminium
Linear Slides - Utilitrak - PW - Crowned - Channel - Aluminium


Use with Utilitrak PW Crowned Carriages. 6063-T6 aluminium alloy. Economical choice for light duty applications.


Related Information:


Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium
Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium

Also see combined categories:
All Ball Lock Pins

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring. Tee handle. Also called detent pins.

Positive lock detent pins.

Related Information:


Linear Slides - Utilitrak - PW - Dual Vee - Channel - Aluminium
Linear Slides - Utilitrak - PW - Dual Vee - Channel - Aluminium


Use with Utilitrak PW Dual Vee Carriages. 6063-T6 aluminium alloy. Economical choice for light duty applications.


Related Information:


Snaps - Double Pattern
Snaps - Double Pattern

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy



Snaps - Swivel Trigger
Snaps - Swivel Trigger

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy



Snaps - Swivel Body Decoy
Snaps - Swivel Body Decoy

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy



Snaps - Swivel Eye Leash
Snaps - Swivel Eye Leash

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy



Clamps - Gear - Split
Clamps - Gear - Split

Also see combined categories:
All Gear Clamps

Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.

Related Information:


Pins - Ball Lock - Button Handle - Steel
Pins - Ball Lock - Button Handle - Steel

Also see combined categories:
All Ball Lock Pins

Heat treated 4130 alloy spindle and shank. Handles aluminium. Also called detent pins.

Positive lock detent pins.

Related Information:


Clamps - Gear - Screw Type
Clamps - Gear - Screw Type

Also see combined categories:
All Gear Clamps

Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.

Related Information:


Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium
Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium

Also see combined categories:
All Ball Lock Pins

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy. Tee handle. Also called detent pins.

Positive lock detent pins.

Related Information:


Linear Rail System - Aluminium - Carriages
Linear Rail System - Aluminium - Carriages


Match with rail by rail width dimension. Lightweight construction and easy installation.

Linear guide system with high load carrying capacity, rigity and torque resistance. Rollers are lubricated for life. Base plate anodised aluminium with factory fitted rollers. Elastic elements around the threaded bolts adjust and fix the rollers in the baseplate avoiding risk of mounting error. Supplied with a light preload to cover a wide variety of applications. Load data is for centrally acting loads. For eccentrically acting loads the data should be corrected according to the laws of mechanics. In the case of dynamic loads in the z-direction Fz should be corrected by a factor of 0.6.

Related Information:


Pulleys - Timing - 1.000mm Pitch - 3mm Wide - Through Bore
Pulleys - Timing -  1.000mm Pitch - 3mm Wide - Through Bore

Also see combined categories:
All 1mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 1mm Pitch Timing Belts.

Aluminium Alloy. With set screw.

Related Information:


Pulleys - Timing - 1.000mm Pitch - 6mm Wide - Through Bore
Pulleys - Timing -  1.000mm Pitch - 6mm Wide - Through Bore

Also see combined categories:
All 1mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 1mm Pitch Timing Belts.

Aluminium Alloy. With set screw.

Related Information:


Pulleys - Timing - 10.000mm Pitch - T10 - 26mm Wide - Through Bore
Pulleys - Timing - 10.000mm Pitch - T10 - 26mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit T10 Series belts

Aluminium Alloy. Finished through bore ready to assemble.

Related Information:


Pulleys - Timing - 10.000mm Pitch - T10 - 32mm Wide - Through Bore
Pulleys - Timing - 10.000mm Pitch - T10 - 32mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit T10 Series belts

Aluminium Alloy. Finished through bore ready to assemble.

Related Information:


Pulleys - Timing - 10.000mm Pitch - T10 - 50mm Wide - Through Bore
Pulleys - Timing - 10.000mm Pitch - T10 - 50mm Wide - Through Bore

Also see combined categories:
All 10mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit T10 Series belts

Aluminium Alloy. Finished through bore ready to assemble.

Related Information:


Pulleys - Timing - 2.000mm Pitch - GT2 - 3mm Wide - Through Bore
Pulleys - Timing -  2.000mm Pitch - GT2 - 3mm Wide - Through Bore

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 2mm Pitch Timing Belts.

Aluminium Alloy. Finished Bores with Set Screws.

Related Information:


Pulleys - Timing - 2.000mm Pitch - GT2 - 9mm Wide - Through Bore
Pulleys - Timing -  2.000mm Pitch - GT2 - 9mm Wide - Through Bore

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 9mm Wide.

Aluminium Alloy. Set Screw Locking.

Related Information:


Pulleys - Timing - 3.000mm Pitch - GT2 - 15mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - GT2 - 15mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 15mm Wide.

Aluminium Alloy. Finsihed through bore. Set screw locking.

Related Information:


Pulleys - Timing - 3.000mm Pitch - GT2 - 6mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - GT2 -  6mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 6mm Wide.

Aluminium Alloy. Finished through bore ready to assemble.

Related Information:


Pins - Ball Lock - L-Handle - Industrial - Stainless Steel
Pins - Ball Lock - L-Handle - Industrial - Stainless Steel

Also see combined categories:
All Ball Lock Pins

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy. Also called detent pins.

Positive lock detent pins.

Related Information:


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 126906 products in 2519 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 126906 products in 2519 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.