International currencies? Visit the New MBA Store
Small Parts & Bearings - an MBA company

Gears metric racks categories

Gears Metric Bevel


Gears - Bevel - Module 1.5 - Plastic
Gears - Bevel - Module 1.5 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. This category may be available in the new MBA online store at Gears - Bevel - Module 1.5 - Plastic.

Related Information:
Module 1.5 Mitre Gears

Gears - Bevel - Module 1 - Plastic
Gears - Bevel - Module 1 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. This category may be available in the new MBA online store at Gears - Bevel - Module 1 - Plastic.

Related Information:
Module 1 Mitre Gears

Gears Metric Mitre


Gears - Mitre - Module 0.5 - Plastic
Gears - Mitre - Module 0.5 - Plastic

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - Module 0.5 - Plastic.

Related Information:

Gears - Mitre - Module 1.5 - Brass
Gears - Mitre - Module 1.5 - Brass

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - Module 1.5 - Brass.

Related Information:
Module 1.5 Bevel Gears
Module 1.5 Spiral Mitre Gears

Gears - Mitre - Module 1 - Brass
Gears - Mitre - Module 1 - Brass

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - Module 1 - Brass.

Related Information:
Module 1 Bevel Gears
Module 1 Spiral Mitre Gears

Gears - Mitre - Module 1 - Plastic
Gears - Mitre - Module 1 - Plastic

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - Module 1 - Plastic.

Related Information:
Module 1 Bevel Gears
Module 1 Spiral Mitre Gears

Gears - Mitre - Module 3 - Plastic
Gears - Mitre - Module 3 - Plastic

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - Module 3 - Plastic.

Related Information:
Module 3 Bevel Gears
Module 3 Spiral Mitre Gears

Gears Metric Spur


Gears - Spur - Module 0.4 - Brass
Gears - Spur - Module 0.4 - Brass

Also see combined categories:
All Module 0.4 Spur Gears
All Metal Module 0.4 Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. This category may be available in the new MBA online store at Gears - Spur - Module 0.4 - Brass.

Gears - Spur - Module 0.4 - Plastic
Gears - Spur - Module 0.4 - Plastic

Also see combined categories:
All Module 0.4 Spur Gears
All Plastic Module 0.4 Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. Acetal

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. This category may be available in the new MBA online store at Gears - Spur - Module 0.4 - Plastic.

Gears - Spur - Module 0.5 - Plastic
Gears - Spur - Module 0.5 - Plastic

Also see combined categories:
All Module 0.5 Spur Gears
All Plastic Module 0.5 Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. Acetal.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. This category may be available in the new MBA online store at Gears - Spur - Module 0.5 - Plastic.

Gears - Spur - Module 0.5 - Stainless
Gears - Spur - Module 0.5 - Stainless

Also see combined categories:
All Module 0.5 Spur Gears
All Metal Module 0.5 Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. 303 stainless steel and 416 stainless steel.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. This category may be available in the new MBA online store at Gears - Spur - Module 0.5 - Stainless.

Gears - Spur - Module 0.7 - Plastic
Gears - Spur - Module 0.7 - Plastic


PCD = No. of Teeth x 0.700mm. 20o Pressure Angle. Acetal.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. This category may be available in the new MBA online store at Gears - Spur - Module 0.7 - Plastic.

Gears - Spur - Module 0.8 - Aluminium
Gears - Spur - Module 0.8 - Aluminium

Also see combined categories:
All Module 0.8 Spur Gears
All Metal Module 0.8 Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. 2024 aluminium

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. This category may be available in the new MBA online store at Gears - Spur - Module 0.8 - Aluminium.

Gears - Spur - Module 0.8 - Plastic
Gears - Spur - Module 0.8 - Plastic

Also see combined categories:
All Module 0.8 Spur Gears
All Plastic Module 0.8 Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. Acetal

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. This category may be available in the new MBA online store at Gears - Spur - Module 0.8 - Plastic.

Gears - Spur - Module 0.8 - Stainless
Gears - Spur - Module 0.8 - Stainless

Also see combined categories:
All Module 0.8 Spur Gears
All Metal Module 0.8 Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. 303 stainless steel and 416 stainless steel

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. This category may be available in the new MBA online store at Gears - Spur - Module 0.8 - Stainless.

Gears - Spur - Module 1.25 - Stainless
Gears - Spur - Module 1.25 - Stainless

Also see combined categories:
All Module 1.25 Spur Gears
All Metal Module 1.25 Spur Gears

PCD = No. of Teeth x 1.250mm. 20o Pressure Angle. 303 stainless steel

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. This category may be available in the new MBA online store at Gears - Spur - Module 1.25 - Stainless.

Gears - Spur - Module 1.5 - Plastic
Gears - Spur - Module 1.5 - Plastic

Also see combined categories:
All Module 1.5 Spur Gears
All Plastic Module 1.5 Spur Gears

PCD = No. of Teeth x 1.500mm. 20o Pressure Angle. Acetal and Nylon

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. This category may be available in the new MBA online store at Gears - Spur - Module 1.5 - Plastic.

Gears - Spur - Module 1 - Plastic
Gears - Spur - Module 1 - Plastic

Also see combined categories:
All Module 1.0 Spur Gears
All Plastic Module 1.0 Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. Acetal

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. This category may be available in the new MBA online store at Gears - Spur - Module 1 - Plastic.

Gears - Spur - Module 3 - Plastic
Gears - Spur - Module 3 - Plastic

Also see combined categories:
All Module 3.0 Spur Gears

PCD = No. of Teeth x 3.000mm. 20o Pressure Angle. Nylon

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. This category may be available in the new MBA online store at Gears - Spur - Module 3 - Plastic.

Gears Metric Mitre


Gears - Mitre - Module 1 - Zinc Diecast
Gears - Mitre - Module 1 - Zinc Diecast

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - Module 1 - Zinc Diecast.

Related Information:
Module 1 Bevel Gears
Module 1 Spiral Mitre Gears

Gears - Mitre - Module 2 - Zinc Diecast
Gears - Mitre - Module 2 - Zinc Diecast

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - Module 2 - Zinc Diecast.

Related Information:
Module 2 Bevel Gears
Module 2 Spiral Mitre Gears

Gears Metric Spiral Mitre


Gears - Mitre - Spiral - Module 1.5 - Steel
Gears - Mitre - Spiral - Module 1.5 - Steel

Also see combined categories:
All Metric Mitre Gears
All Metric Spiral Mitre Gears

1:1 Ratio. 20o Pressure Angle - 35o Spiral tooth - Steel.

A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - Spiral - Module 1.5 - Steel.

Related Information:
Module 1.5 Straight Cut Mitre Gears
Module 1.5 Spiral Bevel Gears

Gears - Mitre - Spiral - Module 3.5 - Steel
Gears - Mitre - Spiral - Module 3.5 - Steel

Also see combined categories:
All Metric Mitre Gears
All Metric Spiral Mitre Gears

1:1 Ratio. 20o Pressure Angle - 35o Spiral tooth - Steel.

A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. This category may be available in the new MBA online store at Gears - Mitre - Spiral - Module 3.5 - Steel.

Gears Metric Spur


Gears - Spur - Module 0.4 - Plastic with Insert
Gears - Spur - Module 0.4 - Plastic with Insert

Also see combined categories:
All Module 0.4 Spur Gears
All Plastic Module 0.4 Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. Acetal

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. This category may be available in the new MBA online store at Gears - Spur - Module 0.4 - Plastic with Insert.

Gears - Spur - Module 0.5 - Plastic with Insert
Gears - Spur - Module 0.5 - Plastic with Insert

Also see combined categories:
All Module 0.5 Spur Gears
All Plastic Module 0.5 Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. Acetal.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. This category may be available in the new MBA online store at Gears - Spur - Module 0.5 - Plastic with Insert.

Gears - Spur - Module 0.8 - Plastic with Insert
Gears - Spur - Module 0.8 - Plastic with Insert

Also see combined categories:
All Module 0.8 Spur Gears
All Plastic Module 0.8 Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. Acetal

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. This category may be available in the new MBA online store at Gears - Spur - Module 0.8 - Plastic with Insert.

Gears Metric Worms


Worm Gears - Module 1.5 Series 3 - Plastic and Metallic - Right Hand
Worm Gears - Module 1.5 Series 3 - Plastic and Metallic - Right Hand

Also see combined categories:
All Worm Gears
All Metric Worm Gears

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 6.90o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:
Matching Metallic Module 1.5 Worms Series 3 Right Hand

Worm Gears - Module 1 Series 1 - Plastic and Metallic - Left Hand
Worm Gears - Module 1 Series 1 - Plastic and Metallic - Left Hand

Also see combined categories:
All Worm Gears
All Metric Worm Gears

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:
Matching Metallic Module 1 Worms Series 1 Left Hand

Worm Gears - Module 1 Series 1 - Plastic and Metallic - Right Hand
Worm Gears - Module 1 Series 1 - Plastic and Metallic - Right Hand

Also see combined categories:
All Worm Gears
All Metric Worm Gears

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:
Matching Metallic Module 1 Worms Series 1 Right Hand

You may also be interested in

Gears Inch Racks


Gear Racks - 16DP - Steel
Gear Racks - 16DP - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. DP stands for Diametrical Pitch imperial sizes.

16 DP. Approx 4.99mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 16DP - Steel.

Gear Racks - 16DP - Plastic
Gear Racks - 16DP - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.

16 DP. Approx 4.99mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 16DP - Plastic.

Gear Racks - 12DP - Steel
Gear Racks - 12DP - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

12 DP. Approx 6.65mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 12DP - Steel.

Gear Racks - 24DP - 14.5 PA - Plastic
Gear Racks - 24DP - 14.5 PA - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 24DP - 14.5 PA - Plastic.

Gear Racks - 48DP - 14.5 PA - Steel
Gear Racks - 48DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 48 DP. Approx 1.66mm between teeth. This category may be available in the new MBA online store at Gear Racks - 48DP - 14.5 PA - Steel.

Gear Racks - 24DP - Stainless
Gear Racks - 24DP - Stainless

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 24DP - Stainless.

Gear Racks - 32DP - 14.5 PA - Plastic
Gear Racks - 32DP - 14.5 PA - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 32DP - 14.5 PA - Plastic.

Gear Racks - 48DP - 14.5 PA - Plastic
Gear Racks - 48DP - 14.5 PA - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 48 DP. Approx 1.66mm between teeth. This category may be available in the new MBA online store at Gear Racks - 48DP - 14.5 PA - Plastic.

Gear Racks - 48DP - Stainless
Gear Racks - 48DP - Stainless

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 48 DP. Approx 1.66mm between teeth. This category may be available in the new MBA online store at Gear Racks - 48DP - Stainless.

Gear Racks - 64DP - Stainless
Gear Racks - 64DP - Stainless

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 64 DP. Approx 1.25mm between teeth. This category may be available in the new MBA online store at Gear Racks - 64DP - Stainless.

Gear Racks - 96DP - Stainless
Gear Racks - 96DP - Stainless

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 96 DP. Approx 0.83mm between teeth. This category may be available in the new MBA online store at Gear Racks - 96DP - Stainless.

Gear Racks Flexible


Gear Racks - Flexible
Gear Racks - Flexible

Also see combined categories:
All Flexible Gear Racks

Blue acetal. Ideal for curved or irregular surfaces. Can fit a bent radius as small as 75mm.

20o Pressure Angle. Resistant to weak acids and alkalis, oil, grease, petrol, alcohol, ketones. Working temperature 100 Deg. C, Intermittent to 149 Deg. C. See optional rack clamps and guide rails. Longer lengths available on special order.

Gears Inch Racks


Gear Racks - 10DP - 14.5 PA - Steel
Gear Racks - 10DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 10 DP. Approx 7.98mm between teeth. This category may be available in the new MBA online store at Gear Racks - 10DP - 14.5 PA - Steel.

Gear Racks - 20DP - 14.5 PA - Steel
Gear Racks - 20DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 20 DP. Approx 3.99mm between teeth. This category may be available in the new MBA online store at Gear Racks - 20DP - 14.5 PA - Steel.

Gear Racks - 32DP - Stainless Steel
Gear Racks - 32DP - Stainless Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 32DP - Stainless Steel.

Gear Racks - 6DP - 14.5 PA - Steel
Gear Racks - 6DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 6 DP. Approx 13.3mm between teeth. This category may be available in the new MBA online store at Gear Racks - 6DP - 14.5 PA - Steel.

Gear Racks - 8DP - 14.5 PA - Steel
Gear Racks - 8DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 8 DP. Approx 9.98mm between teeth. This category may be available in the new MBA online store at Gear Racks - 8DP - 14.5 PA - Steel.

Gear Racks - 96DP - Stainless - Side Holes
Gear Racks - 96DP - Stainless - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

96 DP. Approx 0.83mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 96DP - Stainless - Side Holes.

Pins Taper


Pins - Taper - Metric - Carbon Steel
Pins - Taper - Metric - Carbon Steel

Also see combined categories:
All Metric Taper Pins

Metric Sizes Tapered 1:50. DIN 1 - A - Ground Ra 0.8um

Metric Sizes to DIN 1. This category may be available in the new MBA online store at Pins - Taper - Metric - Carbon Steel.

Related Information:
Taper Pins catalogue PDF
Master Pins Catalogue PDF

Pins - Taper - Metric - Extractable - External Thread
Pins - Taper - Metric - Extractable - External Thread

Also see combined categories:
All Metric Taper Pins

Metric Sizes Tapered 1:50 and threaded externally for easy extraction.

DIN 7977. This category may be available in the new MBA online store at Pins - Taper - Metric - Extractable - External Thread.

Related Information:
Taper Pins catalogue PDF
Master Pins Catalogue PDF

Pins - Taper - Metric - Extractable - Internal Thread
Pins - Taper - Metric - Extractable - Internal Thread

Also see combined categories:
All Metric Taper Pins

Metric Sizes Tapered 1:50 and threaded internally for easy extraction.

DIN 7978. This category may be available in the new MBA online store at Pins - Taper - Metric - Extractable - Internal Thread.

Related Information:
Taper Pins catalogue PDF
Master Pins Catalogue PDF




Main Pages

About Us

About Us
 Acetal Bearings PDF

Acetal Bearings PDF
 ADR and SKF PDF

ADR and SKF PDF
 Anderton Circlips Cross Reference PDF

Anderton Circlips Cross Reference PDF
 Ball Lock Pins PDF

Ball Lock Pins PDF
 Balls List

Balls List
 Balls PDF

Balls PDF
 Barden Bearings Cross Reference PDF

Barden Bearings Cross Reference PDF
 Bearings List

Bearings List
 Brands

Brands
 Catalogue

Catalogue
 Ceramic Bearings PDF

Ceramic Bearings PDF
 Circlips PDF

Circlips PDF
 Clearance Items List

Clearance Items List
 Clevis Pins PDF

Clevis Pins PDF
 Contact Us

Contact Us
 Charity

Charity
 Corrosion Resistant Bearings PDF

Corrosion Resistant Bearings PDF
 Dental Bearings

Dental Bearings
 Disc Springs PDF

Disc Springs PDF
 Dowel Pins PDF

Dowel Pins PDF
 Dowel Pins

Dowel Pins
 Economy Bearings PDF

Economy Bearings PDF
 Essentra Cross Reference PDF

Essentra Cross Reference PDF
 Flocast Cross Reference PDF

Flocast Cross Reference PDF
 Freight Rates and Shipping Times

Freight Rates and Shipping Times
 Frequently Asked Questions

Frequently Asked Questions
 General Information about MBA

General Information about MBA
 Hammer Drive Pins PDF

Hammer Drive Pins PDF
 High Speed Bearings PDF

High Speed Bearings PDF
 Hobby Clearance

Hobby Clearance
 Hobby Information

Hobby Information
 K&S Metals Cross Reference PDF

K&S Metals Cross Reference PDF
 Key Steel PDF

Key Steel PDF
 Knobs PDF

Knobs PDF
 Large Bearings

Large Bearings
 Leveling Mounts PDF

Leveling Mounts PDF
 Mailorder Form

Mailorder Form
 McMaster Carr Cross Reference PDF

McMaster Carr Cross Reference PDF
 Metallic Bushes PDF

Metallic Bushes PDF
 Miniature Precison Bearings Cross Reference PDF

Miniature Precison Bearings Cross Reference PDF
 Nordex Cross Reference PDF

Nordex Cross Reference PDF
 NSK and NTN Cross Reference PDF

NSK and NTN Cross Reference PDF
 Ondrives Cross Reference PDF

Ondrives Cross Reference PDF
 O-Rings PDF

O-Rings PDF
 Pins PDF

Pins PDF
 Plastic Bearings PDF

Plastic Bearings PDF
 Polyvee Belts and Pulleys PDF

Polyvee Belts and Pulleys PDF
 Precision Shim Washers PDF

Precision Shim Washers PDF
 Privacy

Privacy
 Push On and Push In Rings PDF

Push On and Push In Rings PDF
 Reid Supply Cross Reference PDF

Reid Supply Cross Reference PDF
 Rod & Tube PDF

Rod & Tube PDF
 Roll Pins PDF

Roll Pins PDF
 SDP-SI Designatronics Cross Reference PDF

SDP-SI Designatronics Cross Reference PDF
 Seeger Circlips Cross Reference PDF

Seeger Circlips Cross Reference PDF
 Shaft Collars PDF

Shaft Collars PDF
 Shim Sheet PDF

Shim Sheet PDF
 Shoulder Screws PDF

Shoulder Screws PDF
 Sintered Bronze Bushes PDF

Sintered Bronze Bushes PDF
 Sintered Bronze Cross Reference PDF

Sintered Bronze Cross Reference PDF
 Small Bearings

Small Bearings
 Small Parts Inc Cross Reference PDF

Small Parts Inc Cross Reference PDF
 Snap Rings PDF

Snap Rings PDF
 Socket Set Screws PDF

Socket Set Screws PDF
 Solid Bronze Bushes PDF

Solid Bronze Bushes PDF
 Spring Steel Strip PDF

Spring Steel Strip PDF
 Springs PDF

Springs PDF
 Standard Ball Bearing Range PDF

Standard Ball Bearing Range PDF
 Super Precision Bearings PDF

Super Precision Bearings PDF
 Taper Pins PDF

Taper Pins PDF
 Technical Information

Technical Information
 Terms

Terms
 Thrust Bearings PDF

Thrust Bearings PDF
 Thumb Screws and Nuts PDF

Thumb Screws and Nuts PDF
 Timing Belts and Pulleys Cross Reference PDF

Timing Belts and Pulleys Cross Reference PDF
 Timing Belts PDF

Timing Belts PDF
 Timing Pulley Stock PDF

Timing Pulley Stock PDF
 Timing Pulleys PDF

Timing Pulleys PDF
 Vibration Mounts PDF

Vibration Mounts PDF
 Washers and Spacers PDF

Washers and Spacers PDF
 Wave Washers PDF

Wave Washers PDF
 Domains

Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 130404 products in 2013 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

 
ADR and SKF PDF (Link) About Us Acetal Bearings PDF (Link) Anderton Circlips Cross Reference PDF (Link) Ball Lock Pins PDF (Link) Balls List Balls PDF (Link)
Paypal Accepted
Paypal
Secure Checkout
Barden Bearings Cross Reference PDF (Link) Bearings List Bearings and Balls Brands Catalogue Ceramic Bearings PDF (Link) Charity Circlips PDF (Link)
Visa Card Accepted
Visa
Secure Checkout
Clamping and Locking Clearance Items List Clevis Pins PDF (Link) Contact Us Control Products Corrosion Resistant Bearings PDF (Link) Dental Bearings Dental
Master Card Accepted
Mastercard
Secure Checkout
Disc Springs PDF (Link) Domains Dowel Pins PDF (Link) Dowel Pins Economy Bearings PDF (Link) Essentra Cross Reference PDF (Link) Fasteners Flocast Cross Reference PDF (Link)
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Freight Rates and Shipping Times (Link) Frequently Asked Questions Gears General Information about MBA (Link) Hammer Drive Pins PDF (Link) High Speed Bearings PDF (Link) Hobby Clearance (Link) Hobby Information
Amex Accepted
Amex
Secure Checkout
K&S Metals Cross Reference PDF (Link) Key Steel PDF (Link) Kits Knobs PDF (Link) Large Bearings (Link) Leveling Mounts PDF (Link) Linear Bearings and Systems Literature
Paypal Accepted
Paypal
Secure Checkout
Magnets Mailorder Form (Link) Materials McMaster Carr Cross Reference PDF (Link) Metallic Bushes PDF (Link) Miniature Precison Bearings Cross Reference PDF (Link) Miscellaneous NSK and NTN Cross Reference PDF (Link)
Visa Card Accepted
Visa
Secure Checkout
Nordex Cross Reference PDF (Link) O-Rings PDF (Link) Ondrives Cross Reference PDF (Link) Packing and Display Pins PDF (Link) Plastic Bearings PDF (Link) Polyvee Belts and Pulleys PDF (Link) Power Transmission
Master Card Accepted
Mastercard
Secure Checkout
Precision Shim Washers PDF (Link) Privacy Push On and Push In Rings PDF (Link) Reid Supply Cross Reference PDF (Link) Rod & Tube PDF (Link) Roll Pins PDF (Link) SDP-SI Designatronics Cross Reference PDF (Link) Seals
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Seeger Circlips Cross Reference PDF (Link) Shaft Collars PDF (Link) Shaft Couplings Shafting Shim Sheet PDF (Link) Shoulder Screws PDF (Link) Sintered Bronze Bushes PDF (Link) Sintered Bronze Cross Reference PDF (Link)
Amex Accepted
Amex
Secure Checkout
Small Bearings (Link) Small Parts Inc Cross Reference PDF (Link) Snap Rings PDF (Link) Socket Set Screws PDF (Link) Solid Bronze Bushes PDF (Link) Spring Steel Strip PDF (Link) Springs PDF (Link) Springs and Retraction
Paypal Accepted
Paypal
Secure Checkout
Standard Ball Bearing Range PDF (Link) Storage Super Precision Bearings PDF (Link) Taper Pins PDF (Link) Technical Information Terms Thrust Bearings PDF (Link) Thumb Screws and Nuts PDF (Link)
Visa Card Accepted
Visa
Secure Checkout
Timing Belts PDF (Link) Timing Belts and Pulleys Cross Reference PDF (Link) Timing Belts and Pulleys Timing Pulley Stock PDF (Link) Timing Pulleys PDF (Link) Tools Vibration Control Vibration Mounts PDF (Link)
Master Card Accepted
Mastercard
Secure Checkout
Washers and Spacers PDF (Link) Wave Washers PDF (Link)

Products

Adjusters Allthread Angle Assortments Backup Rings Ball Joints Ball Parallels Ball Screw Accessories Ball Screws Ground
Paypal Accepted
Paypal
Secure Checkout
Ball Screws Nook Series Ball Screws Rolled Ball Splines Linear Ball Transfers Balls Ceramic Balls Metallic Balls Plastic Balls Rubber Bar and Rod Batteries
Visa Card Accepted
Visa
Secure Checkout
Bearings Angular Contact Bearings Ceramic Bearings Conveyor Bearings Double Row Ball Bearings Flanged Ball Bearings Grooved Profile Bearings Housings Bearings Mounted Bearings Needle Roller Bearings One Way Clutch
Master Card Accepted
Mastercard
Secure Checkout
Bearings Pivot Bearings Plastic Bearings Plates Bearings Single Row Ball Bearings Special Purpose Bearings Stainless Special Grades Bearings Tapered Roller Bearings Thrust Bearings and Housings Insert Bearings for Dental Equipment
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Bearings for Housings Bearings for Skating Belts Poly Vee Belts Posi-Drive Belts Rounthane Belts Timing 40DP LT Pitch Belts Timing AT10 10mm Belts Timing AT5 5mm Belts Timing GT2 -14mm Belts Timing GT2 2mm
Amex Accepted
Amex
Secure Checkout
Belts Timing GT2 3mm Belts Timing GT2 5mm Belts Timing GT2 8mm Belts Timing H Pitch 12.7mm Belts Timing HTD -14mm Belts Timing HTD 3mm Belts Timing HTD 5mm Belts Timing HTD 8mm Belts Timing L Pitch 9.53mm Belts Timing MXL Pitch
Paypal Accepted
Paypal
Secure Checkout
Belts Timing T01 1mm Belts Timing T015 1.5mm Belts Timing T10 10mm Belts Timing T2.5 2.5mm Belts Timing T5 5mm Belts Timing XL Pitch 5.08mm Bumpers Bungs Bushes Bronze Bushes Plastic
Visa Card Accepted
Visa
Secure Checkout
Bushes Steel Bushings Spherical Cable Ties Cable Cam Followers Castors Accessories Castors Plate Castors Stud Catalogues Catches
Master Card Accepted
Mastercard
Secure Checkout
Chain and Sprockets Ladder Chain and Sprockets Roller Channel Circlips Clamping Bushings Clamping Rings Clamps Clevis Joints Clips Clutches
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Collars Couplings Geargrip Couplings Helical and Slit Couplings Insert and Jaw Couplings Other Couplings Rigid Cross Blocks Dampers Dual Vee Bearings Engineering and Hobby Rod
Amex Accepted
Amex
Secure Checkout
Eyebolts Fastening Bushings Flexible Shaft Gas Springs Gear Blanks Gear Racks Flexible Gearboxes Cross Axis Gearheads Inline Gearmotors Basic Gearmotors DC
Paypal Accepted
Paypal
Secure Checkout
Gearmotors Open Gearmotors Permanent Magnet Gears Cluster Gears Inch Bevel Gears Inch Mitre Gears Inch Racks Gears Inch Spur Gears Inch Worms Gears Metric Bevel Gears Metric Mitre
Visa Card Accepted
Visa
Secure Checkout
Gears Metric Racks Gears Metric Spiral Mitre Gears Metric Spur Gears Metric Worms Handles Handpiece Parts Hobby Gears Hooks Housings for Ball Bearings
Master Card Accepted
Mastercard
Secure Checkout
Housings with Bearing Hubs Insulator Strips Insulators Isolators Keys and Keysteel Keys Knobs Ball Knobs Cabinet Knobs Cross
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Knobs Knurled Knobs Lever Knobs Lobe Knobs Mushroom Knobs Oval Knobs Pointer Knobs Push Pull Knobs Round Knobs Star Knobs Thumb
Amex Accepted
Amex
Secure Checkout
Knobs Tri Knobs Valve Knobs Wing Lanyards Latches Handle Latches Other Latches Quarter Turn Lazy Susans Leads and Connectors Leadscrew Actuators
Paypal Accepted
Paypal
Secure Checkout
Leadscrews Levers Linear Bearing Housings Linear Bearings with Housing Linear Bearings Linear Slides Locking Assemblies Locking Bushings Magnets Alcomax Magnets Alnico
Visa Card Accepted
Visa
Secure Checkout
Magnets Ceramic Magnets Cup Magnets Rare Earth Magnets Rubber and Vinyl Motors DC Motors Vibrating Mounts Base Mounts Bonded Mounts Conical Mounts Cup
Master Card Accepted
Mastercard
Secure Checkout
Mounts Cylindrical Mounts Leveling Mounts Machinery Mounts Plate Mounts Rectangular Mounts Wedge Nuts Dome Nuts Hex Nuts Lock for Bearings Nuts Lock
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Nuts Specialty Nuts Thumb Nuts Wing O-Rings for Dental Applications O-Rings Oil Seals Pillars Pinion Wire Imperial Pins Ball Lock Pins Clevis
Amex Accepted
Amex
Secure Checkout
Pins Cotter Pins Dowel Pins General Pins Locating Pins Pull Pins Roll Pins Taper Pins Wirelock Plugs Plungers Ball
Paypal Accepted
Paypal
Secure Checkout
Plungers Indexing Plungers Spring Positioning Pressure Rollers Protective Packing and Sleeves Pulley Blocks Pulleys Flanges Pulleys Grooved Pulleys Idler Pulleys Poly Vee
Visa Card Accepted
Visa
Secure Checkout
Pulleys Timing 40DP LT Pitch Pulleys Timing AT10 10mm Pulleys Timing AT5 5mm Pulleys Timing GT2 -14mm Pulleys Timing GT2 2mm Pulleys Timing GT2 3mm Pulleys Timing GT2 5mm Pulleys Timing GT2 8mm Pulleys Timing H Pitch 12.7mm Pulleys Timing HTD 3mm
Master Card Accepted
Mastercard
Secure Checkout
Pulleys Timing HTD 5mm Pulleys Timing HTD 8mm Pulleys Timing L Pitch 9.53mm Pulleys Timing MXL Pitch Pulleys Timing T01 1mm Pulleys Timing T10 10mm Pulleys Timing T2.5 2.5mm Pulleys Timing T5 5mm Pulleys Timing XL Pitch 5.08mm Pulleys Vee
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
RC Car and Buggy Wheels Ratchets and Pawls Rod Ends PTFE Lined Rod Ends Plastic Rod Ends Stainless Steel Rod Ends Stamped Rod Ends Standard Rod Ends Studded Rollers Screws Button Head
Amex Accepted
Amex
Secure Checkout
Screws Cap Head Screws Captive Screws Cheese Head Screws Coach Screws Countersunk Screws Grub Screws Hex Head Screws Large Head Screws Pan Head Screws Panel
Paypal Accepted
Paypal
Secure Checkout
Screws Round Head Screws Security Screws Self Tapping Screws Shoulder Screws Square Head Screws Thumb Screws Wood Seals and Sealing Sets Shaft Extenders and Reducers
Visa Card Accepted
Visa
Secure Checkout
Shafting Aluminium Shafting General Purpose Shafting Precision Ground Shaftloc Shim Shock Absorbers Sleeves Snap Buttons Snaps Spacers
Master Card Accepted
Mastercard
Secure Checkout
Spare Part Boxes Spring Anchors Spring Motors Spring Mounts Spring Washers Spring Wire Springs Compression Springs Constant Force Springs Die Springs Disc
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Springs Extension Springs General Springs Torsion Spur Gear Stock Inch Square Shaft Stays Stops Spring Strip Stroke Rotary Bushings Studs
Amex Accepted
Amex
Secure Checkout
Suction Cups Switches Tape Tee Joints Tension Bushings Tensioners Thread Inserts Timing Belt Lengths Tips Tolerance Rings
Paypal Accepted
Paypal
Secure Checkout
Tooling Balls Tools Bending Tools Bits Tools Circlip Tools Cutting Tools Deburring Tools General Tools Pullers Tools Screw Extractors Tools Threading
Visa Card Accepted
Visa
Secure Checkout
Tube and Tubing Turntables Universal Joint Covers Universal Joints Telescoping V-Rings Vee Belts Washers Aligning Washers Finishing Washers Flat Fibre Washers Flat Metallic
Master Card Accepted
Mastercard
Secure Checkout
Washers Flat Plastic Washers Flat Rubber Washers Lock Washers Locking Washers Serrated Locking Washers Shoulder Washers Square Washers Thrust Wear Strips Wheels Industrial
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Wrenches Yoke Ends

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 130404 products in 2013 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.