Small Parts & Bearings - an MBA company

Gears Bevel 32 Diametrical Pitch Plastic Categories


Gears Inch Bevel


Gears - Bevel - 32 Diametrical Pitch - Plastic
Gears - Bevel - 32 Diametrical Pitch - Plastic

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Nylon and Acetal.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:


Gears - Bevel - 24 Diametrical Pitch - Plastic
Gears - Bevel - 24 Diametrical Pitch - Plastic

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Nylon.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:


Gears - Bevel - 48 Diametrical Pitch - Plastic
Gears - Bevel - 48 Diametrical Pitch - Plastic

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Nylon and Acetal.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:


You may also be interested in

Gears Inch Mitre


Gears - Mitre - 32 Diametrical Pitch - Plastic
Gears - Mitre - 32 Diametrical Pitch - Plastic

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Nylon

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:


Gears - Mitre - 16 Diametrical Pitch - Plastic
Gears - Mitre - 16 Diametrical Pitch - Plastic

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Nylon.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:


Gears - Mitre - 24 Diametrical Pitch - Plastic
Gears - Mitre - 24 Diametrical Pitch - Plastic

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Nylon.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:


Gears - Mitre - 48 Diametrical Pitch - Plastic
Gears - Mitre - 48 Diametrical Pitch - Plastic

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Nylon

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:


Gears Inch Bevel


Gears - Bevel - 32 Diametrical Pitch - Brass
Gears - Bevel - 32 Diametrical Pitch - Brass

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:


Gears Inch Racks


Gear Racks - 32DP - 14.5 PA - Plastic
Gear Racks -  32DP - 14.5 PA - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gears Inch Spur


Gears - Spur - 32DP - 20 Degree - Plastic
Gears - Spur -  32DP - 20 Degree - Plastic

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 32DP - 14.5 Degree - Plastic
Gears - Spur -  32DP - 14.5 Degree - Plastic

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 32DP - 20 Degree - Plastic with Insert
Gears - Spur -  32DP - 20 Degree - Plastic with Insert

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears Inch Worms


Worm Gears - 32DP Series 1 - Plastic
Worm Gears - 32DP Series 1 - Plastic

Also see combined categories:
All Worm Gears
All Imperial Worm Gears

Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:


Worm Gears - 32DP Series 2 - Plastic
Worm Gears - 32DP Series 2 - Plastic

Also see combined categories:
All Worm Gears
All Imperial Worm Gears

Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:


Gears Inch Racks


Gear Racks - 16DP - Plastic
Gear Racks -  16DP - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.

16 DP. Approx 4.99mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gears Inch Bevel


Gears - Bevel - 48 Diametrical Pitch - Precision Matched Sets
Gears - Bevel - 48 Diametrical Pitch - Precision Matched Sets

Also see combined categories:
All Imperial Bevel Gear Sets

Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. See Gears - Mitre for 1:1 ratios.

Related Information:


Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets

Also see combined categories:
All Imperial Bevel Gear Sets

Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. See Gears - Mitre for 1:1 ratios.

Related Information:


Gears - Bevel - 72 Diametrical Pitch - Precision Matched Sets
Gears - Bevel - 72 Diametrical Pitch - Precision Matched Sets

Also see combined categories:
All Imperial Bevel Gear Sets

Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. See Gears - Mitre for 1:1 ratios.

Related Information:


Gears - Bevel - 24 Diametrical Pitch - Brass
Gears - Bevel - 24 Diametrical Pitch - Brass

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:


Gears - Bevel - 48 Diametrical Pitch - Brass
Gears - Bevel - 48 Diametrical Pitch - Brass

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:


Gears - Bevel - 48 Diametrical Pitch - Steel
Gears - Bevel - 48 Diametrical Pitch - Steel

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:


Gears Inch Racks


Gear Racks - 24DP - 14.5 PA - Plastic
Gear Racks -  24DP - 14.5 PA - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 48DP - 14.5 PA - Plastic
Gear Racks -  48DP - 14.5 PA - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 48 DP. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.


Gears Inch Mitre


Gears - Mitre - 32 Diametrical Pitch - Brass
Gears - Mitre - 32 Diametrical Pitch - Brass

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:


Gears Inch Worms


Worm Gears - 24DP Series 1 - Plastic
Worm Gears - 24DP Series 1 - Plastic

Also see combined categories:
All Worm Gears
All Imperial Worm Gears

Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:


Gears Inch Mitre


Gears - Mitre - 32 Diametrical Pitch - Steel
Gears - Mitre - 32 Diametrical Pitch - Steel

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:


Gears Inch Spur


Gears - Spur - 64DP - Plastic
Gears - Spur -  64DP - Plastic

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.397mm (1/64 in.). 20o Pressure Angle. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 32DP - Hub Mounting - Plastic with Aluminium Core
Gears - Spur -  32DP - Hub Mounting - Plastic with Aluminium Core

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal with aluminium core. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 24DP - 14.5 Degree - Plastic
Gears - Spur -  24DP - 14.5 Degree - Plastic

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system. Nylon.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 64DP - Plastic with Insert
Gears - Spur -  64DP - Plastic with Insert

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.397mm (1/64 in.). 20o Pressure Angle. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 72DP - Plastic with Insert
Gears - Spur -  72DP - Plastic with Insert

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.353mm (1/72 in.). 20o Pressure Angle. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 16DP - 14.5 Degree - Plastic
Gears - Spur -  16DP - 14.5 Degree - Plastic

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 1.588mm (1/16 in.). 14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 16 Diametrical Pitch. Approx 4.99mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 48DP - 14.5 Degree - Plastic
Gears - Spur -  48DP - 14.5 Degree - Plastic

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.529mm (1/48 in.). 14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 16DP - 20 Degree - Plastic
Gears - Spur -  16DP - 20 Degree - Plastic

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 1.588mm (1/16 in.). 20o Pressure Angle. Nylon and acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 16 Diametrical Pitch. Approx 4.99mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 48DP - 20 Degree - Plastic
Gears - Spur -  48DP - 20 Degree - Plastic

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.529mm (1/48 in.). 20o Pressure Angle. Acetal and nylon. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 48DP - Hub Mounting - Plastic with Aluminium Core
Gears - Spur -  48DP - Hub Mounting - Plastic with Aluminium Core

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 64DP - Hub Mounting - Plastic with Aluminium Core
Gears - Spur -  64DP - Hub Mounting - Plastic with Aluminium Core

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 72DP - Hub Mounting - Plastic with Aluminium Core
Gears - Spur -  72DP - Hub Mounting - Plastic with Aluminium Core

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 16DP - 20 Degree - Plastic with Stainless Core - Hubless
Gears - Spur -  16DP - 20 Degree - Plastic with Stainless Core - Hubless

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 1.588mm (1/16 in.). 20o Pressure Angle. Nylon. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 16 Diametrical Pitch. Approx 4.99mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 48DP - 20 Degree - Plastic with Insert
Gears - Spur -  48DP - 20 Degree - Plastic with Insert

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.529mm (1/48 in.). 20o Pressure Angle. Acetal and Nylon. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 24DP - Hub Mounting - Plastic with Aluminium Core - No Hub
Gears - Spur -  24DP - Hub Mounting - Plastic with Aluminium Core - No Hub

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 32DP - 14.5 Degree - Brass
Gears - Spur -  32DP - 14.5 Degree - Brass

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 32DP - 20 Degree - Brass
Gears - Spur -  32DP - 20 Degree - Brass

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 32DP - 14.5 Degree - Steel
Gears - Spur -  32DP - 14.5 Degree - Steel

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5o Pressure Angle. Carbon steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 32DP - 20 Degree - Aluminium
Gears - Spur -  32DP - 20 Degree - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 32DP - 20 Degree - Steel
Gears - Spur -  32DP - 20 Degree - Steel

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. Carbon Steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears Inch Mitre


Gears - Mitre - 24 Diametrical Pitch - Brass
Gears - Mitre - 24 Diametrical Pitch - Brass

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:


Gears - Mitre - 48 Diametrical Pitch - Brass
Gears - Mitre - 48 Diametrical Pitch - Brass

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:


Gears Inch Spur


Gears - Spur - 32DP - 20 Degree - Stainless
Gears - Spur -  32DP - 20 Degree - Stainless

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. 303 Stainless Steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 24DP - 20 Degree - Plastic with No Hub
Gears - Spur -  24DP - 20 Degree - Plastic with No Hub

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. Brass or Stainless Steel Inserts. Clamping or Grub Screw hubs. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124370 products in 2774 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124370 products in 2774 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.