Small Parts & Bearings - an MBA company

Covid-19 Update!! Current supply status - 3rd April 2020.

Trading by online order and email. Allow a few extra days for all deliveries and pre-orders due to quarantine precautions. Most of our distributors are open and able to contact us using the distributor phone line.

If legislation requires us to cease trading our emegency contacts will be available to those who might need them. Hospitals, medical and bio research teams please email us if you need emergency contacts for equipment spare parts.

Gear racks 80dp stainless side holes categories


Gears Inch Racks


Gear Racks - 72DP - Stainless - Side Holes
Gear Racks -  72DP - Stainless - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

72 DP. Approx 1.11mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 96DP - Stainless - Side Holes
Gear Racks -  96DP - Stainless - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

96 DP. Approx 0.83mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 24DP - Stainless
Gear Racks -  24DP - Stainless

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 64DP - Stainless
Gear Racks -  64DP - Stainless

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 64 DP. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 120DP - Aluminium - Side Holes
Gear Racks -  120DP - Aluminium - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

120 DP. Approx 0.66mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gears - Spur - 72DP - Stem - Stainless
Gears - Spur -  72DP - Stem - Stainless

Also see combined categories:
All Imperial Stem Gears

303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - Module 1.25 - Stainless
Gears - Spur - Module 1.25 - Stainless

Also see combined categories:
All Module 1.25 Spur Gears
All Metal Module 1.25 Spur Gears

PCD = No. of Teeth x 1.250mm. 20o Pressure Angle. 303 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - Module 0.8 - Stainless
Gears - Spur - Module 0.8 - Stainless

Also see combined categories:
All Module 0.8 Spur Gears
All Metal Module 0.8 Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. 303 stainless steel and 416 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - Module 0.5 - Stainless
Gears - Spur - Module 0.5 - Stainless

Also see combined categories:
All Module 0.5 Spur Gears
All Metal Module 0.5 Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. 303 stainless steel and 416 stainless steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - Module 1 - Stainless
Gears - Spur - Module 1 - Stainless

Also see combined categories:
All Module 1.0 Spur Gears
All Metal Module 1.0 Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. 303 stainless steel and 416 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - Module 1 - Plastic with Stainless Hub
Gears - Spur - Module 1 - Plastic with Stainless Hub

Also see combined categories:
All Module 1.0 Spur Gears
All Plastic Module 1.0 Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 72DP - Stainless
Gears - Spur -  72DP - Stainless

Also see combined categories:
All 72DP Spur Gears
All Metal 72DP Spur Gears

PCD = No. of Teeth x 0.353mm (1/72 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 48DP - 20 Degree - Stainless
Gears - Spur -  48DP - 20 Degree - Stainless

Also see combined categories:
All 48DP Spur Gears 20 Degree
All 48DP Spur Gears 20 Degree Metal

PCD = No. of Teeth x 0.529mm (1/48 in.). 20o Pressure Angle. 303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Dual Vee - Tracks with Mounting Holes - Stainless Steel
Dual Vee - Tracks with Mounting Holes - Stainless Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:


Dual Vee - Tracks without Mounting Holes - Stainless Steel
Dual Vee - Tracks without Mounting Holes - Stainless Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:


Gears - Spur - 24DP - 20 Degree - Plastic - Plain
Gears - Spur -  24DP - 20 Degree - Plastic - Plain

Also see combined categories:
All 24DP Spur Gears 20 Degree
All 24DP Spur Gears 20 Degree Plastic

PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. Acetal or Nylon w/ Brass or Stainless Steel Inserts. Clamping or Grub Screw hubs. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 24DP - 20 Degree - Plastic with Insert
Gears - Spur -  24DP - 20 Degree - Plastic with Insert

Also see combined categories:
All 24DP Spur Gears 20 Degree
All 24DP Spur Gears 20 Degree Plastic

PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. Acetal or Nylon w/ Brass or Stainless Steel Inserts. Clamping or Grub Screw hubs. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Pins - Side Thrust - Single Sided - Stainless Ball
Pins - Side Thrust - Single Sided - Stainless Ball

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Stainless ball and stainless spring with black oxide coated steel body.

Related Information:


Pins - Split - Stainless Steel
Pins - Split - Stainless Steel

Also see combined categories:
All Split Pins

Split pins.

Hole size indicated is maximum for the pin to be effective. If the pin you require is not available, you may be able to use the next larger diameter so long as the pin is smaller than your hole size. Longer lengths may be cut back to a suitable length.

Related Information:


Clamps - Gear - Split
Clamps - Gear - Split

Also see combined categories:
All Gear Clamps

Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.

Related Information:


Clamps - Gear - Screw Type
Clamps - Gear - Screw Type

Also see combined categories:
All Gear Clamps

Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.

Related Information:


Inserts - Expansion - Press In - 303 Stainless - Flanged
Inserts - Expansion - Press In - 303 Stainless - Flanged

Also see combined categories:
All Expansion Inserts

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.

Material : 303 Stainless Steel. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability but where maximum strength is required other inserts shown in this catalogue should be preferred.


Inserts - Expansion - Press In - 303 Stainless Steel
Inserts - Expansion - Press In - 303 Stainless Steel

Also see combined categories:
All Expansion Inserts

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.

Material : 303 Stainless Steel. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability but where maximum strength is required other inserts shown in this catalogue should be preferred.


Springs - Constant Force
Springs - Constant Force


301 Stainless Steel

Mounting hole specifications will be supplied on request. These springs are usually mounted on a drum and the free end attached to a loading force like a counterbalance. Free ID may vary to meet load specification. Load capacity can be increased by using multiple strips in tandem, back to back or laminated. Be sure to leave at least 40mm coiled on the drum at full extension. The spring ID will wrap tightly on the drum so that most applications require no fastening to the drum.

Related Information:


Mounts - Leveling - Socket Type - 316 Stainless Steel
Mounts - Leveling - Socket Type - 316 Stainless Steel

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

For leveling machine tools, electronic racks, benches etc on uneven surfaces. Adjusters.


Related Information:


Mounts - Leveling - Hygienic - Anchoring - One Hole
Mounts - Leveling - Hygienic - Anchoring - One Hole

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.

Related Information:


Mounts - Leveling - Hygienic - Anchoring - Two Hole
Mounts - Leveling - Hygienic - Anchoring - Two Hole

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.

Related Information:


Inserts - Self Tapping - For Aluminium - Stainless 303
Inserts - Self Tapping - For Aluminium - Stainless 303

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Related Information:


Inserts - Self Tapping - For Plastics - Stainless Steel
Inserts - Self Tapping - For Plastics - Stainless Steel

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Use of installation tool recommended. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Standard made from 303 stainless steel. Quantity orders can also be supplied in Brass or 316 Stainless.

Related Information:


Sealing Plugs - Stainless Sleeve and Ball
Sealing Plugs - Stainless Sleeve and Ball


The sealing plug is a safe, quick, leakproof and low cost method for sealing cross-drilled holes. It ensures peak performance with a comfortable safety margin even in extreme applications.

Sleeve: Stainless Steel DIN 1.4305, AISI 303 Clear passivated to MIL S 5002 Aerospace Quality. Ball: Stainless Steel DIN 1.4301, AISI 304 Clear passivated to MIL S 5002 Aerospace Quality. Hardness: HB = 220.


Sealing Plugs - Stainless Sleeve with Hardened Ball
Sealing Plugs - Stainless Sleeve with Hardened Ball


The sealing plug is a safe, quick, leakproof and low cost method for sealing cross-drilled holes. It ensures peak performance with a comfortable safety margin even in extreme applications.

Sleeve: Stainless Steel DIN 1.4305, AISI 303. Ball: Bearing Steel, Heat Treated. Hardness: HB = 220.


Mounts - Leveling - Nylon - Socket Type - No Lag Holes
Mounts - Leveling - Nylon - Socket Type - No Lag Holes

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Steel and stainless steel socket internal threads. Use your own custom thread length. Adjusters.


Related Information:


Mounts - Leveling - Nylon - Studded Type - With Lag Holes
Mounts - Leveling - Nylon - Studded Type - With Lag Holes

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Steel and stainless steel threads. Adjusters.


Related Information:


Pins - Hammer Drive - Round Head - Stainless Steel
Pins - Hammer Drive - Round Head - Stainless Steel

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Stainless Steel 304 Grade. Simple, low cost assembly. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Related Information:


Mounts - Leveling - Socket Type - 303 Stainless Steel
Mounts - Leveling - Socket Type - 303 Stainless Steel

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - 303 Stainless Steel
Mounts - Leveling - Stud Type - 303 Stainless Steel

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - 316 Stainless Steel
Mounts - Leveling - Stud Type - 316 Stainless Steel

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - 303 Stainless Steel 2
Mounts - Leveling - Socket Type - 303 Stainless Steel 2

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - 303 Stainless - With Pad
Mounts - Leveling - Socket Type - 303 Stainless - With Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - 316 Stainless - With Pad
Mounts - Leveling - Socket Type - 316 Stainless - With Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - 303 Stainless Steel - Padded
Mounts - Leveling - Stud Type - 303 Stainless Steel - Padded

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - 316 Stainless Steel - Padded
Mounts - Leveling - Stud Type - 316 Stainless Steel - Padded

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Socket Type - 303 Stainless - With Acetal Pad
Mounts - Leveling - Socket Type - 303 Stainless - With Acetal Pad

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Mounts - Leveling - Stud Type - 303 Stainless Steel - Acetal Base
Mounts - Leveling - Stud Type - 303 Stainless Steel - Acetal Base

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.


Related Information:


Bearings - Self Clinching - Self Aligning - Stainless and Delrin -tm-
Bearings - Self Clinching - Self Aligning - Stainless and Delrin -tm-

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo acetal bearings in a special stainless steel self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:


Bearings - Thrust - Ball - Grooved - Stainless Steel
Bearings - Thrust - Ball - Grooved - Stainless Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:


Bearings - Thrust - Ball - Flat - Stainless Steel
Bearings - Thrust - Ball - Flat - Stainless Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:


Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext
Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive locking mechanism keeps drawer locked in the open position until actively released. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Pins - Side Thrust - Single Sided - Plastic Ball
Pins - Side Thrust - Single Sided - Plastic Ball

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Plastic ball and stainless spring with black oxide coated steel body.

Related Information:


Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext
Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive stop slide that will not disconnect once installed. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 126767 products in 2547 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 126767 products in 2547 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.