Small Parts & Bearings - an MBA company

F22870 INA


Cross Referenced Part Numbers



OW-0100-0140-0120-R INA part number F-22870





ID (d): 10.000. OD (D): 14.000. Width (B): 12.000.

Online Price: 0.00     
Stock: Pre-Order (due 3 weeks)     
Due dates are estimates only     


Category Matches

Fishing Reel Parts


Inazuma 85 Graphite Jarvis Walker Parts
Inazuma 85 Graphite Jarvis Walker Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


You may also be interested in

Dental Handpiece Parts


Turbina Master TKD Parts
Turbina Master TKD Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Turbina Mini Master TKD Parts
Turbina Mini Master TKD Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Ball Screw Accessories


Ballscrew - Thomson Saginaw - Accessories
Ballscrew - Thomson Saginaw - Accessories

Also see combined categories:
All Ball Screws

Wiper Kits and Flanges for Ball Nuts. Match all components within the Thomson Saginaw range only.



Ballscrew - Thomson Saginaw - Nut
Ballscrew - Thomson Saginaw - Nut

Also see combined categories:
All Ball Screws

Ball Nuts to Suit Thomson Saginaw ball screws. Match all components within the Thomson Saginaw range only.

All Right hand thread only.


Ball Screws Rolled


Ballscrew - Thomson Saginaw
Ballscrew - Thomson Saginaw

Also see combined categories:
All Ball Screws

Offer 90% efficiency converting rotary to linear motion with low coefficient of friction. Match all components within the Thomson Saginaw range only.

When replacing screws, hydraulics or pneumatics, they allow the use of smaller, less expensive drive motors and reduce the need for auxiliary equipment. Offer dependable accuracy and repeatability, Made off high quality alloy steel, hardened to Rockwell 56-60C.


Fishing Reel Parts


Jasper ACE 800 Shina Parts
Jasper ACE 800 Shina Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Belts Rounthane


Belts - Rounthane
Belts - Rounthane


Joinable belting. 88 Shore A hardness. Yellow colour. Temperature range -31 to 65 Deg C (-25 to 150 Deg F).

Join with Rounthane Connectors (purchased separately). Material : Non Slip Polyurethane. Use with grooved idler pulleys with diameters at least 8 times the belt width. Purchased per 305mm (1 foot) of length. Orders for more than one length of 305mm will be supplied as a continuous length. FDA / USDA approved.

Related Information:


Belts - Rounthane - Connectors
Belts - Rounthane - Connectors


Joinable belting connectors.


Related Information:




Washers - Lock - External Tooth - Spring Steel
Washers - Lock - External Tooth - Spring Steel

Also see combined categories:
All External Tooth Lock Washers
All Lock Washers

Dimensions are nominal and may vary between batches.


Washers - Lock - External Tooth - Stainless Steel
Washers - Lock - External Tooth - Stainless Steel

Also see combined categories:
All External Tooth Lock Washers
All Lock Washers

Dimensions are nominal and may vary between batches.


Bearings - Linear - Frelon J Lined - Closed - Precision
Bearings - Linear - Frelon J Lined - Closed - Precision

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Precision type has closer running clearances.

Related Information:


Bearings - Linear - Frelon J Lined - Closed - Standard
Bearings - Linear - Frelon J Lined - Closed - Standard

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Standard type has slightly larger running clearances.

Related Information:


Square Bar - Urethane
Square Bar - Urethane

Also see combined categories:
All Non Metallic Bar - Square

Hard urethane rubber compound. Machinable. Length +/- 3.2mm. Length +/- 2 percent.


Bearings - Linear - Frelon Gold Lined - Closed - Precision
Bearings - Linear - Frelon Gold Lined - Closed - Precision

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.

Related Information:


Bearings - Linear - Frelon Gold Lined - Closed - Standard
Bearings - Linear - Frelon Gold Lined - Closed - Standard

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.

Related Information:


Bearings - Linear - Frelon Gold Lined - Open - Precision
Bearings - Linear - Frelon Gold Lined - Open - Precision

Also see combined categories:
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.

Related Information:


Bearings - Linear - Frelon Gold Lined - Open - Standard
Bearings - Linear - Frelon Gold Lined - Open - Standard

Also see combined categories:
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.

Related Information:


Rod - Round - Urethane
Rod - Round - Urethane

Also see combined categories:
All Non Metallic Rod - Round

Hard urethane rubber compound. Machinable.

Length +/- 3.2mm. Diameter +/- 2 percent.

Related Information:


Washers - Lock - Split - Steel
Washers - Lock - Split - Steel

Also see combined categories:
All Split Lock Washers
All Lock Washers

Plain and zinc plated

Dimensions are nominal and may vary between batches. Washers designed to be used to help prevent nuts from vibrating loose.


Washers - Flat - Stainless Steel 304 - Commercial
Washers - Flat - Stainless Steel 304 - Commercial

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Related Information:


Washers - Flat - Stainless Steel 316 - Commercial
Washers - Flat - Stainless Steel 316 - Commercial

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Related Information:


Housings - Linear - Square
Housings - Linear - Square

Also see combined categories:
All Linear Bearing Housings

Used to maintain radial integrity and eliminate the need for parallel shafting.

Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.


Switches - Rocker
Switches - Rocker

Also see combined categories:
All Switches

20mm Diameter mounting hole 12V/10amp. On/Off Round Switches with Housing. Illuminates when turned to on position.

Switchs are rated at 10amp @ 600VAC with finger safe screw terminals.


Belts - Vee - 16.5 x 11.0mm - B
Belts - Vee - 16.5 x 11.0mm - B

Also see combined categories:
All Vee Belts 15.9mm and 16.5mm Top Width

16.5mm Top Width x 11.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:


Belts - Vee - 31.5 x 19.0mm - D
Belts - Vee - 31.5 x 19.0mm - D


31.5mm Top Width x 19.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:


Spiral Rings - External - Medium-Heavy Duty
Spiral Rings - External - Medium-Heavy Duty

Also see combined categories:
All External Spiral Rings

AME / WST / RST - Spring Steel and Stainless Steel.

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AME, Smalley: WST, Spirolox and Ramsey: RST.


Belts - Wedge - 12.7 x 10.0mm - SPA
Belts - Wedge - 12.7 x 10.0mm - SPA

Also see combined categories:
All Vee Belts 12.5mm and 12.7mm Top Width

12.7mm Top Width x 10.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:


Screws - Security - Post Combi Square - Pan Head - Super Zinc
Screws - Security - Post Combi Square - Pan Head - Super Zinc

Also see combined categories:
All Security Screws

Each 200 pack comes with a Post Combination Driver Bit. Metric only.

Use special tool listed under Screws - Securty - Socket - Tools.

Related Information:


Belts - Wedge - 16.3 x 13.0mm - SPB - 5V
Belts - Wedge - 16.3 x 13.0mm - SPB - 5V

Also see combined categories:
All Vee Belts 15.9mm and 16.5mm Top Width

16.3mm Top Width x 13.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:


Belts - Wedge - 25.4 x 22.2mm - SPP-8V
Belts - Wedge - 25.4 x 22.2mm - SPP-8V


25.4mm Top Width x 22.2mm Height.

Sizes are nominal and may vary slightly.

Related Information:


Spiral Rings - Internal - Medium-Heavy Duty
Spiral Rings - Internal - Medium-Heavy Duty

Also see combined categories:
All Internal Spiral Rings

Includes Series AMI / WHT / Spirolox RRT - Spring Steel and Stainless Steel.

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT.


Pins - Dowel Bushings
Pins - Dowel Bushings

Also see combined categories:
All Dowel Bushings

Series DB100 Spirol

Spring Steel. Precision rolled bushes manufactured from spring steel. Designed to eliminate the need for separate dowling where two components are to be located accurately together and fastened with bolts. They are available for use with bolts from M5 to M12.

Related Information:


Gearmotors - DC PM - Size 70x114
Gearmotors - DC PM - Size 70x114

Also see combined categories:
All DC Permanent Magnet Gearmotors

Permanent Magnet.

Max. Allowable Radial Load: 100N (10mm from mounting surface). Max. Allowable Axial Load: 30N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20oC to +60oC. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g.


Belts - Vee - 10.0 x 6.0mm - Z
Belts - Vee - 10.0 x 6.0mm - Z

Also see combined categories:
All Vee Belts 8mm and 10mm Top Width

Miniature and small belts. 10.0mm Top Width x 6.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:


Belts - Vee - 8.0 x 4.0mm
Belts - Vee -  8.0 x 4.0mm

Also see combined categories:
All Vee Belts 8mm and 10mm Top Width

Miniature and small belts. 8.0mm Top Width x 4.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 127031 products in 2352 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 127031 products in 2352 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.