Small Parts & Bearings - an MBA company

Searched For: ESRBN40A MISUMI


Cross Referenced Part Numbers



W-0204-D-040-015-C Misumi part number E-SRBN40A





Nominal OD (A): 40.00. Nominal ID (B): 20.40. Stock Thickness (C): 1.500.

Retail Price: 0.00 (Pack of 50 )     
Lower price for quantities     
Stock: Pre-Order (due 6 weeks)     
Due dates are estimates only     


Category Matches

Bushes Plastic


Bushes - Plastic - Clip - Bevelled Edge
Bushes - Plastic - Clip - Bevelled Edge

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

M250 Polymer minus 40 Deg C to 80 Deg C (minus 40 Deg F to 176 Deg F). Used as a light duty split bearing.

Low clearance. Maintenance free. Economical. High Precision. High wear resistance. Light weight. This category may be available in the new MBA online store at Bushes - Plastic - Clip - Bevelled Edge.

Related Information:


You may also be interested in

Couplings K Type


Couplings - K Type
Couplings - K Type


Up to 3600 RPM - Minus 20 to Plus 60o C. 0.34 to 18 Nm.

Strong, flexible polyurethane or Hyrtel(R) is cut and tear resistant. Up to 3600 RPM. Urethane: Minus 20 to Plus 60o C / Hyrtel(R) : Minus 40 to Plus 100o C. Precision swaged mechanically crimped hubs. Annealed steel hubs.

Related Information:


Housings with Bearing


Housings - Bearing - Pillow Block - Thermoplastic - W300
Housings - Bearing - Pillow Block - Thermoplastic - W300

Also see combined categories:
All Housings with Integral Bearing

Iglide L280 / Igus W300 Ball with Thermoplatic Body.

Maintenance Free, Lightweight, Self-Lubricating. Compensates for alignment errors. Temperature Range -40 oC to +130 oC. Max. Static Tensile Strength is Long Term. Info for Short Term also available. This category may be available in the new MBA online store at Housings - Bearing - Pillow Block - Thermoplastic - W300.


Bushes Plastic


Bushes - Plastic - Clip - Double Flanged
Bushes - Plastic - Clip - Double Flanged

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

For use with sheet metal. Used as a light duty split bearing.

Low clearance. Maintenance free. Economical. High Precision. High wear resistance. Light weight. M250 Polymer minus 40 oC to 80 oC (minus 40 Deg F to 176 Deg F). This category may be available in the new MBA online store at Bushes - Plastic - Clip - Double Flanged.

Related Information:


Housings with Bearing


Housings - Bearing - Pedestal - Miniature - Self Aligning
Housings - Bearing - Pedestal - Miniature - Self Aligning

Also see combined categories:
All Housings with Integral Bearing

Spyraflo pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs. Simplify designs.

Small and cost effective. All bore sizes are mounted in the same size housing for ease of design and cost efficiency. High precision bearings pre-mounted with a 5o misalignment capability. 40,000 RPM recommended maximum speed with testing. 27kgf radial static capacity, 54kgf radial dynamic capacity per bearing. RoHS, REACH and SVHC environmental compliant.


Linear Bearings


Bearings - Linear - Sliding - Ceramic Coated
Bearings - Linear - Sliding - Ceramic Coated

Also see combined categories:
All Sliding Linear Bearings

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Minimum shaft hardness RC35. Max PV 40,000. Temperature range -125 oC to +226 Deg C. Max static PSI 5000. This category may be available in the new MBA online store at Bearings - Linear - Sliding - Ceramic Coated.


Belts - Timing - 5.000mm Pitch - GT - 25mm Wide
Belts - Timing -  5.000mm Pitch - GT - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. GT3 replaces GT2 as GT2 stock is depleted. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:


Springs - Die - Imperial - Medium Duty
Springs - Die - Imperial - Medium Duty

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded blue. Efficient operating range is 25 to 40 percent of the length. Maximum deflection is 50 percent of the length. This category may be available in the new MBA online store at Springs - Die - Imperial - Medium Duty.

Related Information:


4000 MS-ML Siemens Parts
4000 MS-ML Siemens Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


4000 S-SL Push Button Siemens Parts
4000 S-SL Push Button Siemens Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


400 Midwest Parts
400 Midwest Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Stradic 4000 FI Shimano Parts
Stradic 4000 FI Shimano Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Theory 4000 Daiwa Parts
Theory 4000 Daiwa Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Slides - Dovetail
Slides - Dovetail

Also see combined categories:
All Linear Slides

Used for work feeders for production milling, positioning fixutres, work holding devices, checking fixtures, shuttle devices, assembly equipment, etc.

Tapered gibs are adjusted with a single screw that moves the gib on the taper. This type remains parallel and wears less as it occurs over the entire surface. Made of continuous cast GS 40,000 PSI pearlitic grey iron. Able to be milled, drilled, tapped, etc. This category may be available in the new MBA online store at Slides - Dovetail.


Springs - Urethane
Springs - Urethane

Also see combined categories:
All Rubber Springs

Urethane springs are designed for use in applications where corrosion, vibration or magnetism prevent the use of conventional steel springs.

They replace steel coil springs in medium pressure applications involving space limitations, high blank holding pressure and adequate stripping. Durometer 95 shore A. Colour black. Tensile strength 5000 psi. Temperature range minus 40 to 80 oC. This category may be available in the new MBA online store at Springs - Urethane.

Related Information:


Belts - Timing - 2.000mm Pitch - GT - Clean - 6mm Wide
Belts - Timing -  2.000mm Pitch - GT - Clean - 6mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

PowerGrip(R) TruMotion(R) Timing Belts in 2.000mm.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. GT3 will replace GT2 as stock is depleted. Pitch (P) - 2.00mm, Tooth Height (H) - 0.76mm, Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:


Balls - Stainless Steel - 400 Grade
Balls - Stainless Steel - 400 Grade

Also see combined categories:
All Metallic Balls

Hardness: Rockwell C: 55-60. Includes 420 and 440C grades

Tolerances available on request. Grades shown are AFBMA / ISO3290-1. AISI440C Stainless Steel. This category may be available in the new MBA online store at Balls - Stainless Steel - 400 Grade.

Related Information:


Balls - Rubber - Santoprene 40D
Balls - Rubber - Santoprene 40D

Also see combined categories:
All Rubber Balls
All Non Metallic Balls

A high performance thermoplastic created by cross linking EPDM rubber with Polypropylene. As an elastomer plastic it is flexible, light weight, and has very good abrasion resistance. It also has good resistance to many acids, bases and aqueous solutions.

It holds up well in both extreme hot and cold environments which can make it preferred over rubber. Common uses include; grips, knobs, handles, gaskets, and ball check valves. Specific Gravity .95 g/cc. Hardness, Shore 40D. Tensile Strength 3000 psi. Melting Point 410 F. Rohs Compliant. Not FDA compliant. This grade is slightly harder than the 87A grade. Colour usually red but some sizes are beige.

Related Information:


Belts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 3.2mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:


Belts - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 4.8mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:


Belts - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 6.4mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:


Belts - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 7.9mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:


Pulleys - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide - Through Bore
Pulleys - Timing -  2.073mm Pitch - 40DP - 4.8mm Wide - Through Bore

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 4.7 to 4.8mm wide. Also known as LT.

Aluminium Alloy. Finished Through Bore Ready To Assemble.

Related Information:


Pulleys - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain
Pulleys - Timing -  2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Also known as LT. Moulded single or double flange. No locking device.


Related Information:


Pulleys - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide - Through Bore
Pulleys - Timing -  2.073mm Pitch - 40DP - 7.9mm Wide - Through Bore

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 7.9 to 8.0mm wide. Also known as LT.

Aluminium Alloy. Finished Through Bore Ready To Assemble.

Related Information:


Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK - Aluminium
Pulleys - Timing -  2.073mm Pitch - 40DP - STOCK - Aluminium


For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Also known as LT.

This category may be available in the new MBA online store at Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK - Aluminium.

Related Information:


Dampers - Rotary - 50 to 400 Ncm
Dampers - Rotary - 50 to 400 Ncm

Also see combined categories:
All Dampers

Rotary dampers enable products to function with a smooth mechanical motion. Prevent lid and access panel closure damage.

Body: Polycarbonate. Temp range 0 to 50 oC. Weight: Max 120 grams. This category may be available in the new MBA online store at Dampers - Rotary - 50 to 400 Ncm.


Washers - Spring - 3 Wave Type - 400 Grade Stainless
Washers - Spring - 3 Wave Type - 400 Grade Stainless

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave.

This category may be available in the new MBA online store at Washers - Spring - 3 Wave Type - 400 Grade Stainless.


Belts - Timing - 14.000mm Pitch - GT - 40mm Wide
Belts - Timing - 14.000mm Pitch - GT -  40mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:


Belts - Timing - 14.000mm Pitch - HTD - 40mm Wide
Belts - Timing - 14.000mm Pitch - HTD -  40mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

HTD Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 14.000mm.

Related Information:


Belts - Timing - 8.000mm Pitch - HTD - 40mm Wide
Belts - Timing -  8.000mm Pitch - HTD -  40mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

HTD Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 8.000mm.

Related Information:


Belts - Timing - 8.000mm Pitch - S8M - 40mm Wide
Belts - Timing -  8.000mm Pitch - S8M - 40mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

S8M Series Timing Belts

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.

Related Information:


Belts - Timing - 10.000mm Pitch - T10 - 40mm Wide
Belts - Timing - 10.000mm Pitch - T10 - 40mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:


Pulleys - Timing - 14.000mm Pitch - GT - 40mm Wide - Taperlock
Pulleys - Timing - 14.000mm Pitch - GT -  40mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 40mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 40mm Wide - Taperlock.

Related Information:


Belts - Timing - 2.032mm Pitch - MXL - Clean - 3.2mm Wide
Belts - Timing -  2.032mm Pitch - MXL - Clean - 3.2mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

PowerGrip(R) TruMotion(R) Timing Belts in 2.032mm or 0.080 inch pitch.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oC to +90oC, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. TruMotion(R) belts have a durable wear surface for longer life and are RoHS compliant. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. RoHs compliant.

Related Information:


S400 - S405 Faro Parts
S400 - S405 Faro Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Calcutta 50-100-150-200-250-251-400-600 Shimano Parts
Calcutta 50-100-150-200-250-251-400-600 Shimano Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


DA4000M Daiwa Parts
DA4000M Daiwa Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.





Main Pages

About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 144275 products in 2044 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 144275 products in 2044 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.