Small Parts & Bearings - an MBA company

Em4t Reid


Cross Referenced Part Numbers



REM-064-R-CT Reid part number EM-4T

Matches our part number
REM-064-R-CT
(Click item to order)

Description: Eye Size (d1): 6.350. Overall Length (L): 49.20. Thread Size: 1/4-28 UNF Right.

Group: Rod Ends - Steel - PTFE Lined - Tight Fit - Male

Stock: Backorder  


Category Matches

Dental Handpiece Parts


EM3000 Nose Cone C. De Giorgi Parts
EM3000 Nose Cone C. De Giorgi Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


You may also like

Locking Assemblies


Assemblies - Locking - Flanged
Assemblies - Locking - Flanged

Also see combined categories:
All Locking Assemblies

Suitable for locking sprockets, pulleys, eccentric shafts.

Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.


Locking Bushings


Elements - Locking
Elements - Locking

Also see combined categories:
All Locking Assemblies

2.4 to 2200 Nm, 6-80mm Bores

ETG 100 High Strength Steel for sizes up to 55mm bore. C60 Steel for sizes over 55mm bore. Recommended machining tolerances Shaft h8, Hub H8.


Gears Inch Internal









Dental Handpiece Parts


3000 Siemens Parts
3000 Siemens Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


TM1 Siemens Parts
TM1 Siemens Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Games General


Games - Memory
Games - Memory

Also see combined categories:
All Games and Gadgets

Brainbox Around The World, Maths and Nature. Memory Cards.


Linear Slides


Linear - Assemblies - Ball Slide - Precision
Linear - Assemblies - Ball Slide - Precision

These precision ball slides have a typical coefficient of friction of 0.003 and provide straight line accuracy of 0.0005mm per mm of travel.

At load capacity a life of 250 million mm of travel can be expected. The expected life at half load capacity is 2.5 billion mm. Factory preload adjustment prevents sideplay and backlash. Lightweight aluminium carriage and base with high load capacity. Four tapped and threaded carriage holes and counterbored base holes simplify installation and component mounting. Long life, self cleaning ball bearing needs no lubrication. Positional repeatability 0.005mm. Clear anodised finish.


Rail Systems - Miniature Profile
Rail Systems - Miniature Profile

Also see combined categories:
All Linear Slides

Ideal for precision applications where mounting space is limited

Gothic arch grooves at raceway contacts enables slide to sustain loads & movement from any direction. Made from stainless steel or plastic for corrosion resistance. End caps have oil holes for easy relubrication.


Rail Systems - Type 1 - Linear - Precision - Carriages - Flanged
Rail Systems - Type 1 - Linear - Precision - Carriages - Flanged

Also see combined categories:
All Type 1 Carriages and Rails

Match with rails by Size Column. With Lube Reservoir

Profile rail guides are used in the production of linear guidance systems with unlimited travel. They consist of a profile rail with 4 precision ground raceways and a slide usint with four ball circulation paths. The square configuration of the raceways results in a guidance system with good rigidity, capable of withstanding moment loads in all directions. The load carrying capacity is equal in all four directions. Low vibration and low noise. Case hardened steel. Supplied with a light preload. Lubricated with lithium based grease.

Related Information:
Matching Rails

Rail Systems - Type 1 - Linear - Precision - Carriages - Narrow
Rail Systems - Type 1 - Linear - Precision - Carriages - Narrow

Also see combined categories:
All Type 1 Carriages and Rails

Match with rails by Size Column. With Lube Reservoir

Profile rail guides are used in the production of linear guidance systems with unlimited travel. They consist of a profile rail with 4 precision ground raceways and a slide usint with four ball circulation paths. The square configuration of the raceways results in a guidance system with good rigidity, capable of withstanding moment loads in all directions. The load carrying capacity is equal in all four directions. Low vibration and low noise. Case hardened steel. Supplied with a light preload. Lubricated with lithium based grease.

Related Information:
Matching Rails

Rail Systems - Type 1 - Linear - Precision - Rails
Rail Systems - Type 1 - Linear - Precision - Rails

Also see combined categories:
All Type 1 Carriages and Rails

Match with carriages by Size Column

Profile rail guides are used in the production of linear guidance systems with unlimited travel. They consist of a profile rail with 4 precision ground raceways and a slide usint with four ball circulation paths. The square configuration of the raceways results in a guidance system with good rigidity, capable of withstanding moment loads in all directions. The load carrying capacity is equal in all four directions. Low vibration and low noise. Case hardened steel. Supplied with a light preload. Lubricated with lithium based grease.

Related Information:
Matching Flanged Carriages
Matching Narrow Carriages

Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Narrow
Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Narrow

Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination. Thin dense chrome.

Related Information:
Chrome Coated Rails

Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Standard
Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Standard

Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination. Thin dense chrome.

Related Information:
Chrome Coated Rails

Rail Systems - Type 2 - Linear - Precision - Rails - Chrome Coated
Rail Systems - Type 2 - Linear - Precision - Rails - Chrome Coated

Match with carriage by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Rails are subjected to multiple straightening processes during and after grinding of the ball paths to ensure straight and accurate rails.

Related Information:
Narrow Thin Dense Chrome Carriages
Standard Thin Dense Chrome Carriages

Rail Systems - Type 3 - Linear - Precision - Carriage - Carbon Steel - Narrow
Rail Systems - Type 3 - Linear - Precision - Carriage - Carbon Steel - Narrow

Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination.

Related Information:
Carbon Steel Rails

Rail Systems - Type 3 -Linear - Precision - Carriage - Carbon Steel - Standard
Rail Systems - Type 3 -Linear - Precision - Carriage - Carbon Steel - Standard

Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination.

Related Information:
Carbon Steel Rails

Rail Systems - Type 3 - Linear - Precision - Rails - Carbon Steel
Rail Systems - Type 3 - Linear - Precision - Rails - Carbon Steel

Match with carriage by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Rails are subjected to multiple straightening processes during and after grinding of the ball paths to ensure straight and accurate rails.

Related Information:
Narrow Carbon Steel Carriages
Standard Carbon Steel Carriages

Surplus Stock


Clearance Items
Clearance Items

Surplus items and deleted stock lines


Spare Parts


Coolers - Remote Control
Coolers - Remote Control

Coolers for Remote Control Cars


Exhausts - Remote Control
Exhausts - Remote Control

Exhausts for Remote Control Cars

Exhaust Pipes, Headers, Springs, Couplers for 1/10, 1/8 and 1/5 Scale Cars.


Heatsink - Remote Control
Heatsink - Remote Control

Motor Heatsinks for Remote Control Cars


Spring Assemblies


Spring Assemblies - Small Bracket - RINO
Spring Assemblies - Small Bracket - RINO

Spring: Stainless Steel 301 S21 Grade. Base: Aluminium Drum: High Impact Styrine. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring.

Related Information:
Technical

Dental Handpiece Parts


TS1 - TS2 Siemens Parts
TS1 - TS2 Siemens Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Bearings Single Row Ball


Bearings - Ball - Semi-Ground - Sealed
Bearings - Ball - Semi-Ground - Sealed

Also see combined categories:
All Radial Ball Bearings

Radial ball bearings. This series is precision ground on all contact surfaces except the bore. Recommended for lighter loads and maximum speed of 3000rpm. Bore tolerance is +0.127/-0.000, OD tolerance is +0.000/-0.013 and width is +0.000/-0.127


Bearings - Ball - Semi-Ground - Shielded
Bearings - Ball - Semi-Ground - Shielded

Also see combined categories:
All Radial Ball Bearings

Radial ball bearings. This series is precision ground on all contact surfaces except the bore. Recommended for lighter loads and maximum speed of 3000rpm. Bore tolerance is +0.127/-0.000, OD tolerance is +0.000/-0.013 and width is +0.000/-0.127


Knobs Knurled


Knobs - Knurled - Female - Phenolic
Knobs - Knurled - Female - Phenolic

Also see combined categories:
All Knurled Knobs
All Knobs

Plastic (high grade gloss black phenolic) with Steel Insert.


Knobs Round


Knobs - Round - Female - Soft
Knobs - Round - Female - Soft

Also see combined categories:
All Round Knobs
All Knobs

Special high impact strength black technopolymer coated with soft touch elastomer chemically bonded (hardness 70 Shore A). Black matte finish. Resistant to solvents, oils, greases and other chemical agents. Brass tapped insert.


Knobs Star


Knobs - Star - Female - Plastic
Knobs - Star - Female - Plastic

Also see combined categories:
All Star Knobs

Also see lobe knobs

Plastic (high grade gloss black phenolic) knob with steel insert. Temperature Range: -30oC to +140oC.


Knobs - Star - Female - Soft
Knobs - Star - Female - Soft

Also see combined categories:
All Star Knobs

Also see lobe knobs

Special high impact strength black technopolymer, covered with soft-touch elastomer chemically bonded (hardness 70 Shore A). Resistant to solvents, oils, greases and other chemical agents. brass insert with tapped blind hole.


Knobs Thumb


Knobs - Thumb - Female
Knobs - Thumb - Female

Also see combined categories:
All Thumb Knobs
All Knobs

Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30oC to +140oC.


Knobs Tri


Knobs - Tri - Female
Knobs - Tri - Female

Also see combined categories:
All Tri Knobs
All Knobs

Black Polypropylene easy to grip knobs.


Knobs Wing


Knobs - Wing - Female - Contoured
Knobs - Wing - Female - Contoured

Also see combined categories:
All Wing Knobs

Plastic (high grade gloss black phenolic) with Steel Insert. Temperature Range: -30oC to +140oC.


Knobs - Wing - Female - Phenolic
Knobs - Wing - Female - Phenolic

Also see combined categories:
All Wing Knobs

Brass threaded insert


Games Amusement


Masks
Masks

Small selection of fun masks


Collectibles


Collectibles - US Millitary - Commemorative Medals
Collectibles - US Millitary - Commemorative Medals

Bronze double sided medals displaying emblem and motto on one side and aircraft or ship on the other.


Lights


Lights - LED - Remote Control
Lights - LED - Remote Control

LED Lights to suit Remote Control Cars


Tape


Tape - Silicone Wrap
Tape - Silicone Wrap

Also see combined categories:
All Tape

Self fusing silicone wrapping tape for emergency repairs or general protection. Seals leaks. Permanent. Self Bonding. No adhesive. Supa Tape.

Resists Fuels, Oils, Acid, Solvent, Salt Water, Road Salt and UV Rays. Temp Range minus 50 oC to plus 260 deg C. Insulates 8000 Volts (per unstretched layer). Tensile Strength 700psi. Lasts for years with a permanent air tight and water tight seal. Some uses include emergency radiator hose repair, insulation for radioactive areas, garden hose repair, exhaust pipe repair, electrical insulation, tool grips, sporting grips, rope ends, air duct joints, wire bundles. Areas of use include outdoor, auto, marine, workshop, motorcycle, camper, hunting, fishing, farming, plumbing, corrosive areas.


Drylin Bearings and Systems


Drylin Linear Assembly Parts - Carriage Only
Drylin Linear Assembly Parts - Carriage Only

Also see combined categories:
All Drylin Assembly Parts

Linear sliding motion. Plain and Locking Types. These carriages require a matching guide rail or matching rack and pinion. Match by size.

Drylin(R) T linear guides are maintenance free and run without additional lubrication. Consequently, they are also suitable for use in damp or dirty environments. Available with a manually operated clamp to achieve a force fit at any desired point along the travel path. The wing screw is used to clamp the slide in place of the guide. Matching components listed in separate category.

Related Information:
Technical

Drylin Linear Assembly Parts - Guide Rails Only
Drylin Linear Assembly Parts - Guide Rails Only

Also see combined categories:
All Drylin Assembly Parts

These rails require a matching carriage as listed in a separate category. Match by size.

Slide Rail: Extruded Aluminium Construction Material: Al Mg Si 0.5. Coating: Hard anodised, 50um Hardness: 500HV. Matching components listed in separate category.

Related Information:
Technical

Linear Slides


Linear Guide System - Low Profile - Size 17
Linear Guide System - Low Profile - Size 17

Also see combined categories:
All Linear Slides

Carriage Assembly and Rails sold separately. Listed in the same category.

Low-Load applications. Max load 50N. Self Lubricating. Corrosion Resistant. Low Friction. Max Speed 15 m/s. Operating Temp -40o to 90o Celius.


Linear Guide System - Two Piece
Linear Guide System - Two Piece

Using Frelon Gold plain bearing technology. Rail and carriage are made from 6063-T6 aluminium and come as a set.

Rails are ceramic coated to resist corrosion and repel weld spatter and contaminants. Smooth running. Dampens vibration. Guide has slots for T nuts or bolts. Two component system allows for easier installation than traditional rail systems.


Linear Rail System - Aluminium - Carriages
Linear Rail System - Aluminium - Carriages

Match with rail by rail width dimension. Lightweight construction and easy installation.

Linear guide system with high load carrying capacity, rigity and torque resistance. Rollers are lubricated for life. Base plate anodised aluminium with factory fitted rollers. Elastic elements around the threaded bolts adjust and fix the rollers in the baseplate avoiding risk of mounting error. Supplied with a light preload to cover a wide variety of applications. Load data is for centrally acting loads. For eccentrically acting loads the data should be corrected according to the laws of mechanics. In the case of dynamic loads in the z-direction Fz should be corrected by a factor of 0.6.

Related Information:
Rail to suit

Linear Rail System - Aluminium - Rail
Linear Rail System - Aluminium - Rail

Match with carriage by rail width dimension. Lightweight construction and easy installation.

Linear guide system with high load carrying capacity, rigity and torque resistance. Rollers are lubricated for life. Drawn and anodised aluminium body with hardened steel angle raceways fitted on each side.

Related Information:
Carriages to suit

Linear Slide Assemblies - Ball - Pre-Loaded - Compliant
Linear Slide Assemblies - Ball - Pre-Loaded - Compliant

Also see combined categories:
All Linear Slide Assemblies

Pre-loaded ball slides provide an acceptable level of accuracy of 0.001mm per mm for most linear motion applications. Considerably lower cost than crossed roller slides.

Uses a conventional hardened steel rod raceway and balls. Incorporates an elastomer spine and shock absorbing backup gib. Provides even and continuous preload, whilst minimising the effects of impact and shock. Tolerant to contamination and can operate of millions of cycles without lubrication. 8-32 UNC mounting holes.


Linear Slide Assemblies - Ball - Pre-Loaded - Hard Gib
Linear Slide Assemblies - Ball - Pre-Loaded - Hard Gib

Also see combined categories:
All Linear Slide Assemblies

Pre-loaded ball slides provide an acceptable level of accuracy of 0.001mm per mm for most linear motion applications. Considerably lower cost than crossed roller slides.

Hard gib preload. Tolerant to contamination and can operate of millions of cycles without lubrication. 8-32 UNC mounting holes.


Linear Slide Assemblies - Cross Roller
Linear Slide Assemblies - Cross Roller

Also see combined categories:
All Linear Slide Assemblies

Higher load capacity than precision ball slide assemblies. High cycling rates. Tolerant of shock and overhanging loads.

Accuracy of 0.00254mm per 25.4mm of travel. Repeatability 0.00254mm. Not as naturally cleaning as ball slides. A good choice for environments protected from dust, and when heavy loads are a consideration. Positive stops prevent over-travel. Rollers improve capacity 8-10 times that of balls. Alternately crossed rollers handle force in any direction. Lightweight aluminium carriage and base. Interchangeable with many types of ball slides. Four tapped carriage holes and two counter bored base holes simplify installation and component mounting.


Linear Slide Assemblies - Plain - Low Profile - High Load
Linear Slide Assemblies - Plain - Low Profile - High Load

Also see combined categories:
All Linear Slide Assemblies

High capacity, square gib slides are ideal for precision machine tool applications.

The square gib design offers high load capacity and accuracy and withstands force in any direction. Gib is adjustable. Straight line accuracy 0.00254mm. Base is fabricated from A2 tool steel and hardened to Rc58-62. Saddle or riding portion of the slide is fabricated from low carbon steel and can be drilled, tapped and milled for mounting purposes. All slides feature Rulon bearing material for low friction. Stick-slip is virtually non existent as friction at startup and low speeds is virtually eliminated. No lubrication required. Rulon is practically inert to acids, bases and solvents making these slides a good choice for contaminated environments. Temp range minus 240 oC to +300 Deg C.


Linear Track System - Crowned Roller
Linear Track System - Crowned Roller

Easy to use system is usually mounted on a vertical surface as a low cost linear motion solution.

Rails, rollers and end stops sold separately. Hardened crown roller allows for self-alignment with good strength and long life. Rails are unistrut typeand are black powder coated. End stops prevent over travel and come with a mounting bolt. End stops are not designed to support loads. Maximum bearing load is 130 kg. Maximum bearing speed is 45 mtrs per minute.


Magnets Cup



Magnets - Cup Assemblies - Loop
Magnets - Cup Assemblies - Loop

Also see combined categories:
All Magnets
All Cup Magnets

Ideal for hanging signs and lights, retrieving steel items from tanks, vats, bins etc.

Plated cup with a 9.525mm ID loop.




Clutches


Clutch Parts - Remote Control
Clutch Parts - Remote Control

Clutch Shoes, Springs, Clutch Bells

Clutch Shoes, Springs, Bells and Complete for Remote Control Cars.


Spare Parts


Exhaust Couplers - Remote Control

Exhaust couplers for Remote Control Cars

Exhaust Pipes, Headers, Springs, Couplers for 1/10, 1/8 and 1/5 Scale Cars.


Exhaust Deflectors - Remote Control

Exhaust deflectors for Remote Control Cars

Exhaust Pipes, Headers, Springs, Couplers for 1/10, 1/8 and 1/5 Scale Cars.


Exhaust Seals - Remote Control
Exhaust Seals - Remote Control

Exhaust seals for Remote Control Cars

Exhaust Pipes, Headers, Springs, Couplers for 1/10, 1/8 and 1/5 Scale Cars.


Gas Springs



Spring Motors


Spring Motor Assemblies - Open - RINO
Spring Motor Assemblies - Open - RINO

Also see combined categories:
All Spring Motors

Budget Assemblies. Average fatigue life of 5000 to 30000 cycles.

Springs : 301 Stainless Steel. Average fatigue life of 5,000 to 30,000 cycles.


Bumpers




Mounts Cylindrical


Mounts - Cylindrical - Female to Blank
Mounts - Cylindrical - Female to Blank

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Related Information:
Neoprene Mounts Forcing Frequencies
Urethane Mounts Loads and Stiffness
Rubber Mounts Forcing Frequencies

Mounts - Cylindrical - Female to Female
Mounts - Cylindrical - Female to Female

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Related Information:
Neoprene Mounts Forcing Frequencies
Urethane Mounts Loads and Stiffness
Rubber Mounts Forcing Frequencies

Dental Handpiece Parts


4000 MS-ML Siemens Parts
4000 MS-ML Siemens Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


T1 Mini TMC3LK Siemens Parts
T1 Mini TMC3LK Siemens Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Housings for Ball Bearings


Housings - Bearing - Single Assembly
Housings - Bearing - Single Assembly

Includes bearings.

Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with a bearing fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.


Rod Ends Plastic


Rod Ends - Plastic - Female
Rod Ends - Plastic - Female

Also see combined categories:
All Female Rod Ends

Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints

Dimensions not shown are available on request.


Knobs Cross




Knobs Knurled


Knobs - Knurled - Torque - Female
Knobs - Knurled - Torque - Female

Also see combined categories:
All Knurled Knobs
All Knobs

Plastic (high grade gloss black phenolic) Knob. Temperature Range: -30oC to +140oC.


Games Amusement


Games - Ipad
Games - Ipad

Also see combined categories:
All Games and Gadgets

Games for the I-Pad with free App included

Includes prestige wooden puzzles and Wasgij.


Gears Inch Spur


Gears - Spur - 120DP - Stem - Stainless
Gears - Spur - 120DP - Stem - Stainless

Also see combined categories:
All Imperial Spur Gears
All Imperial Stem Gears

303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 120 Diametrical Pitch. Approx 0.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

Gears - Spur - 24DP - Stem - Stainless
Gears - Spur -  24DP - Stem - Stainless

Also see combined categories:
All Imperial Spur Gears
All Imperial Stem Gears

303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

Gears - Spur - 32DP - Stem - Stainless
Gears - Spur -  32DP - Stem - Stainless

Also see combined categories:
All Imperial Spur Gears
All Imperial Stem Gears

303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

Gears - Spur - 48DP - Stem - Stainless
Gears - Spur -  48DP - Stem - Stainless

Also see combined categories:
All Imperial Spur Gears
All Imperial Stem Gears

303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

Gears - Spur - 64DP - Stem - Stainless
Gears - Spur -  64DP - Stem - Stainless

Also see combined categories:
All Imperial Spur Gears
All Imperial Stem Gears

303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

Gears - Spur - 72DP - Stem - Stainless
Gears - Spur -  72DP - Stem - Stainless

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

Gears - Spur - 80DP - Stem - Stainless
Gears - Spur -  80DP - Stem - Stainless

Also see combined categories:
All Imperial Spur Gears
All Imperial Stem Gears

303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 80 Diametrical Pitch. Approx 1mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

Gears - Spur - 96DP - Stem - Stainless
Gears - Spur -  96DP - Stem - Stainless

Also see combined categories:
All Imperial Spur Gears
All Imperial Stem Gears

303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 96 Diametrical Pitch. Approx 0.83mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:
For simple ready selected sets of spur gears please see the SPB Website

Hobby Servo Motors


Servo Motor - Digital - Premium Sports
Servo Motor - Digital - Premium Sports

Also see combined categories:
All Digital Hobby Servo Motors

Premium Digital Sport Servos.


Shock Absorbers


Shock Absorbers - For Remote Control Cars
Shock Absorbers - For Remote Control Cars

Shock Absorbers for Remote Control Cars

Shock Absorbers for 1/10 and 1/8th Scale Remote Control Cars.


Tools Pullers


Tools - Pullers - Dowel Remover and Setter
Tools - Pullers - Dowel Remover and Setter

Also see combined categories:
All Tools

Designed for removing and setting any pull dowel up to 25.40mm.

Puller studs are threaded into the pull dowel and puller. Upward hammering motion with the slide handle is used to remove the dowel and a downward motion is used to set.

Related Information:
Extractable Dowel Pins
Extractable Taper Pins

Bumpers


Bumpers - Round - Urethane - Female
Bumpers - Round - Urethane - Female

Also see combined categories:
All Female Bumpers
All Bumpers

With steel core.


Bumpers - Round - Urethane - Female Washer
Bumpers - Round - Urethane - Female Washer

Also see combined categories:
All Female Bumpers
All Bumpers

With steel core. Washer type has a counterbored hole to accept a socket head cap screw. Flat washer molded inside.


Ball Transfers


Ball Transfer Units - Screw Stem - Brass and Aluminium
Ball Transfer Units - Screw Stem - Brass and Aluminium

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


Ball Transfer Units - Screw Stem - Stainless - Precision
Ball Transfer Units - Screw Stem - Stainless - Precision

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


Ball Transfer Units - Screw Stem - Steel - Precision
Ball Transfer Units - Screw Stem - Steel - Precision

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


Dual Vee Bearings


Dual Vee - Wheel Plate Assembly - Wiper
Dual Vee - Wheel Plate Assembly - Wiper

Also see combined categories:
All Dual Vee Assemblies

Use with wheel plate assembly track.

Rail sold seperately. Match with correct Rail Size.

Related Information:
General Information
Engineering Notes
Dual Vee Tracks and Accessories

Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts & Bearings offers 126278 products in 2936 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts & Bearings offers 126278 products in 2936 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.