Small Parts & Bearings - an MBA company

DU1210 ONDRIVES


Cross Referenced Part Numbers



BP0120-0140-0100-DU Ondrives part number DU-1210





Nominal ID (Di): 12.000. Nominal Outside Diameter (Do): 14.000. Length (B): 10.000.

Online Price: 0.00     
Stock: Pre-Order (due 8 weeks)     
Due dates are estimates only     


Category Matches

Gearbox Parts


P30-60 Ondrives Parts
P30-60 Ondrives Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Bushes - Steel - DU - Split - Flanged
Bushes - Steel - DU - Split - Flanged

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE). Lead free.

Operating Temperature -200o to 280o Celsuis. Maximum Load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments. Speed Limit in oil 5 metres surface speed per second.

Related Information:


Bushes - Steel - DU - Split - Unflanged
Bushes - Steel - DU - Split - Unflanged

Also see combined categories:
All Steel Bushes
All Unflanged Steel Bushes

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE). Lead free.

Operating Temperature -200o to 280o Celsius. Maximum load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments. Speed Limit in oil 5 metres surface speed per second.

Related Information:


Dubro by description Dubro Parts
Dubro by description Dubro Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Dubro by part number Dubro Parts
Dubro by part number Dubro Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Dual Vee - Adaptor Bushings
Dual Vee - Adaptor Bushings


Vee grooved track roller bushings.

Stationary bushings have a concentric hole. Adjustable bushings have an eccentric hole allowing positioning of the guide wheel as the bush is turned.

Related Information:


Dual Vee - Guide Wheels
Dual Vee - Guide Wheels

Also see combined categories:
All Dual Vee Guide Wheels

Vee grooved track roller guide wheels with Abec 5 precision bearings.

Match with correct Track Size.

Related Information:


Dual Vee - Guide Wheels - Studded
Dual Vee - Guide Wheels - Studded

Also see combined categories:
All Dual Vee Guide Wheels

Vee grooved track roller guide wheels.

Match with correct Track Size. Note! OD is reference only. Allow up to 1.2 mm larger than listed.

Related Information:


Dual Vee - Tracks with Mounting Holes - Stainless Steel
Dual Vee - Tracks with Mounting Holes - Stainless Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:


Dual Vee - Tracks with Mounting Holes - Steel
Dual Vee - Tracks with Mounting Holes - Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:


Dual Vee - Tracks without Mounting Holes - Stainless Steel
Dual Vee - Tracks without Mounting Holes - Stainless Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:


Dual Vee - Tracks without Mounting Holes - Steel
Dual Vee - Tracks without Mounting Holes - Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:


Dual Vee - Wheel Plate Assembly - Wiper
Dual Vee - Wheel Plate Assembly - Wiper

Also see combined categories:
All Dual Vee Assemblies

Use with wheel plate assembly track.

Rail sold seperately. Match with correct Rail Size.

Related Information:


Dubro Accessories Listed by Description
Dubro Accessories Listed by Description


Accessories for model airplanes and other hobbies.

Allen Keys, Antenna Cowlings, Antenna Tubes, Axles, Ball Links, Ball Drivers, Bellcranks, Cables, Clevis, Clips, Collars, Connectors, Control Horns & Links, Couplings,. Crimps, DVDs, Fittings, Fuel Bottles, Fuel Connectors, Fuel Systems, Fuel Tank, Fuel Tube, Gas Conversion Stoppers, Gear Block Sets, Heat Shrink, Hinges, Horns,. Kwik Grips, Kwik Starts, Kwik Stops, Landing Gears Latchs, Linkages, Links, Mixers, Mounts, Nuts, Pumps, Push Rods, Reamers, Retainers, Rod Ends, Screws,. Screwdrivers, Servo Arms, Servo Savers, Shafts, Spinners, Steering Arms, Stoppers, Switches, Tap & Drill Sets, Tape, Threaded Rods, Tools, Tube Benders,. Turnbuckles, Valves, Washers, Wheels, Wheel Covers, Wheel Retainers, Wing Mount Kits, Wrenchs, Push-Pull Cable.


Rollers - Durasoft - Finned - Stud Mount - Black Neoprene
Rollers - Durasoft - Finned - Stud Mount - Black Neoprene

Also see combined categories:
All Stud Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.


Rollers - Durasoft - Finned - Stud Mount - Coloured Urethane
Rollers - Durasoft - Finned - Stud Mount - Coloured Urethane

Also see combined categories:
All Stud Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.


Rollers - Durasoft - Shaft Mount - Black Neoprene
Rollers - Durasoft - Shaft Mount - Black Neoprene

Also see combined categories:
All Shaft Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.


Rollers - Durasoft - Shaft Mount - Coloured Urethane
Rollers - Durasoft - Shaft Mount - Coloured Urethane

Also see combined categories:
All Shaft Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.


Rollers - Durasoft - Shaft Mount - With Ball Bearing
Rollers - Durasoft - Shaft Mount - With Ball Bearing

Also see combined categories:
All Shaft Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.


Rollers - Durasoft - Stud Mount - Black Neoprene
Rollers - Durasoft - Stud Mount - Black Neoprene

Also see combined categories:
All Stud Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.


Rollers - Durasoft - Stud Mount - Coloured Urethane
Rollers - Durasoft - Stud Mount - Coloured Urethane

Also see combined categories:
All Stud Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.


Washers - Heavy Duty - Machined - Stainless Steel
Washers - Heavy Duty - Machined - Stainless Steel

Also see combined categories:
All Flat Washers and Spacers - Metallic

303 Stainless Steel


Related Information:


Washers - Heavy Duty - Machined - Steel
Washers - Heavy Duty - Machined - Steel

Also see combined categories:
All Flat Washers and Spacers - Metallic

Case hardened cold finished steel with black oxide finish.


Related Information:


Tensioner - Heavy Duty - Type 2
Tensioner - Heavy Duty - Type 2

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted to the side at 90o and is anchored by set screws.

Related Information:


Tensioner - Heavy Duty - Type 3
Tensioner - Heavy Duty - Type 3

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted straight out from face and anchored by set screws. Shaft is located in the centre of the tensioner between the adjusting slots.

Related Information:


Tensioner - Heavy Duty - Type 4
Tensioner - Heavy Duty - Type 4

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted straight out from face and anchored by set screws. Adjusting slots are parallel to each other.

Related Information:


Most Common Heavy Duty Jockey Wheels Parts
Most Common Heavy Duty Jockey Wheels Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Most Common Standard Duty Jockey Wheels Parts
Most Common Standard Duty Jockey Wheels Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Cross Blocks - Heavy Duty - One Knob One Nut
Cross Blocks - Heavy Duty - One Knob One Nut

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.


Cross Blocks - Heavy Duty - Two Knobs
Cross Blocks - Heavy Duty - Two Knobs

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.


Cross Blocks - Heavy Duty - Two Nuts
Cross Blocks - Heavy Duty - Two Nuts

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.


Washers - Square - Heavy Duty - 304 Stainless Steel
Washers - Square - Heavy Duty - 304 Stainless Steel

Also see combined categories:
All Square Washers



Washers - Square - Heavy Duty - Steel
Washers - Square - Heavy Duty - Steel

Also see combined categories:
All Square Washers



Slides - Drawer - Heavy Duty - Lever Disconnect - Dual Lock
Slides - Drawer - Heavy Duty - Lever Disconnect - Dual Lock

Also see combined categories:
All Drawer Slides

Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.

Lever Disconnect. Lock in or lock out. 25.4mm over travel. 12.7mm side space.


Slides - Drawer - Heavy Duty - Lever Disconnect - Lock Out
Slides - Drawer - Heavy Duty - Lever Disconnect - Lock Out

Also see combined categories:
All Drawer Slides

Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.

Lever Disconnect. Lock out only. 25.4mm over travel. 12.7mm side space.


Slides - Drawer - Heavy Duty - Lever Disconnect - Lock Out - Full Ext
Slides - Drawer - Heavy Duty - Lever Disconnect - Lock Out - Full Ext

Also see combined categories:
All Drawer Slides

Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.

Lever Disconnect. Non locking. 19.1mm side space.


Slides - Drawer - Heavy Duty - No Disconnect
Slides - Drawer - Heavy Duty - No Disconnect

Also see combined categories:
All Drawer Slides

Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.

Non disconnect. Hold in detent full extension. 19.1mm side space.


Slides - Drawer - Heavy Duty - No Disconnect - Compact
Slides - Drawer - Heavy Duty - No Disconnect - Compact

Also see combined categories:
All Drawer Slides

Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.

Non disconnect. 25.4mm over travel. 12.7mm side space.


Slides - Drawer - Heavy Duty - Rail Mounting - Hold In Detent
Slides - Drawer - Heavy Duty - Rail Mounting - Hold In Detent

Also see combined categories:
All Drawer Slides

Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.

Full extension. Includes 32mm hole pattern as well as traditional hole pattern. Designed for units up to 760mm wide.


Slides - Drawer - Light Duty - Lever Disconnect
Slides - Drawer - Light Duty - Lever Disconnect

Also see combined categories:
All Drawer Slides

Used for desks, credenzas and cabinets.

Low profile. Hold in detent. Includes 32mm hole pattern as well as traditional hole pattern.


Slides - Drawer - Medium Duty - Easy Disconnect
Slides - Drawer - Medium Duty - Easy Disconnect

Also see combined categories:
All Drawer Slides

Used for shallow drawers, tool chests and medical carts.

Rail mounting. Hold in detent. Full extension. 13.5mm Side space. Includes 32mm hole pattern as well as traditional hole pattern.


Slides - Drawer - Medium Duty - Full Ext
Slides - Drawer - Medium Duty - Full Ext

Also see combined categories:
All Drawer Slides

Used for shallow drawers, tool chests and medical carts.

Hold in detent. 12.7mm Side Space.


Slides - Drawer - Medium Duty - Lever Disconnect
Slides - Drawer - Medium Duty - Lever Disconnect

Also see combined categories:
All Drawer Slides

Used for shallow drawers, tool chests and medical carts.

Hold in detent. Full extension. 12.7mm Side Space. Includes 32mm hole pattern as well as traditional hole pattern.


Slides - Drawer - Medium Duty - Non-Disconnect
Slides - Drawer - Medium Duty - Non-Disconnect

Also see combined categories:
All Drawer Slides

Used for shallow drawers, tool chests and medical carts.

22.4mm over travel. 19.1mm Side Space.


Slides - Drawer - Medium Duty - Non Disconnect - Compact
Slides - Drawer - Medium Duty - Non Disconnect - Compact

Also see combined categories:
All Drawer Slides

Used for shallow drawers, tool chests and medical carts.

19.1mm Extension. 9.7mm Side Space.


Slides - Drawer - Medium Duty - Undercarriage Mount
Slides - Drawer - Medium Duty - Undercarriage Mount

Also see combined categories:
All Drawer Slides

Used for shallow drawers, tool chests and medical carts.

Hold in detent. 21mm over travel.


Chain - Roller - Metal - Duplex - Links
Chain - Roller - Metal - Duplex - Links

Also see combined categories:
All Roller Chain Links

High tensile steel. Double row.



Mounts - Wedge - Heavy Duty
Mounts - Wedge - Heavy Duty

Also see combined categories:
All Wedge Mounts

For installation and precise leveling of heavy industrial machinery.

Three machined wedges are mounted and held together by a horizontal adjusting bolt. A lock screw ensures the mount in the leveled position. Keys in the sliding surface of the wedges ensure rigidity within the mount construction. A special opening allows for bolting of the machine to the floor. Maximum leveling is 6.35mm.

Related Information:


Mounts - Wedge - Light Duty
Mounts - Wedge - Light Duty

Also see combined categories:
All Wedge Mounts

Used for leveling all types of production machines.

Cast iron with non skid pads on top and bottom. Excellent isolation and dampening properties. Free standing, compact, low construction height. Fine adjustments under full load. Pre-tensioned wedges for transverse stability and self locking wedges for longitudinal stability.

Related Information:




Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 128558 products in 2320 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 128558 products in 2320 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.