Couplings Three Jaw Type Hubs Categories
Couplings Insert and Jaw
Couplings - Three Jaw Type - Hubs
Match with Three Jaw Type inserts by OD. Two Hubs and one insert will be needed to make a complete coupling.
Complete with keyway and set screw. No lubrication needed. This category may be available in the new MBA online store at Couplings - Three Jaw Type - Hubs.
Related Information:
Couplings - Three Jaw Type - Inserts
Match with Three Jaw Type hubs by OD
Use Bost-Bronz inserts for high torque loads at slower speeds. Use rubber for quiter operation. Use polyurethane for moderate to heavy shock loads. This category may be available in the new MBA online store at Couplings - Three Jaw Type - Inserts.
Related Information:
Couplings - Spider Type C - Complete
Miniature aluminium curved jaw flexible couplings. 2 to 160 Nm. Match only hubs and spiders from listings SPIDER TYPE C. Inserts are held between the jaws of two hubs.
Discs (either red as standard with blue or white optional) are available to purchase separately. Flexible couplings transmit torque and rotational angle while absorbing misalignment. When the misalignment exceeds allowable values, vibration may result or the life of the coupling may become shortened. Zero backlash in low torque application, made capable by having the hubs pressed in a spacer. Can be used as a flexible coupling in a high torque application. Polyurethane spider.
Related Information:
Couplings - Oldham Hubs - Clamp Style
0.06 to 44 Nm. Max Speed: 3000 RPM.
Single hubs. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.
Related Information:
Couplings - Oldham Disks for Clamp Style
0.06 to 44 Nm. Max Speed: 3000 RPM.
Disk inserts. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.
Related Information:
Couplings - Slit Type - Standard
Aluminium - Stainless Steel - Flexible - Zero Backlash. 0.1 to 35 Nm. 2400 to 48000 rpm.
High Torsional Stiffness. Zero Backlash. This category may be available in the new MBA online store at Couplings - Slit Type - Standard.
Related Information:
Couplings - K Type
Up to 3600 RPM - Minus 20 to Plus 60o C. 0.34 to 18 Nm.
Strong, flexible polyurethane or Hyrtel(R) is cut and tear resistant. Up to 3600 RPM. Urethane: Minus 20 to Plus 60o C / Hyrtel(R) : Minus 40 to Plus 100o C. Precision swaged mechanically crimped hubs. Annealed steel hubs.
Related Information:
Couplings - Reli A Flex - Long Series - Clamp Type
From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).
Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.
Related Information:
Couplings - Reli A Flex - Short Series - Clamp Type
From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).
Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.
Related Information:
Couplings - Reli A Flex - Short Series - Set Screw Type
From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).
Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.
Related Information:
Couplings - Spiral Beam - 6 Beam - Aluminium - Set Screw Type
Pilot Bore size not toleranced. Finished Bore sizes to +0.03/0.00. This category may be available in the new MBA online store at Couplings - Spiral Beam - 6 Beam - Aluminium - Set Screw Type.
Related Information:
Couplings - Geargrip Hubs - Precision
Match with sleeves from sleeves category
This category may be available in the new MBA online store at Couplings - Geargrip Hubs - Precision.
Related Information:
Couplings - Crowned Tooth Gear - Hubs Only
Match with sleeves from the sleeves category
+/- 1.02 mm Axial Displacement. 0.41mm Parallel offset per hub. 1o Angular Displacement. Free axial movement. 19.55 to 88 Nm. 8500 to 14000 rpm. High torque / low inertia.
Related Information:
Couplings - HRC
This category may be available in the new MBA online store at Couplings - HRC.
Related Information:
Couplings - Rigid - 1 Piece Clamp - Stainless Steel
303 Grade Stainless
Precision Machined. High torsional load. Non marring, easy to install and adjust. Use on hardened shafts, rigid clamp type design, easily machinable. Available with stepped bores and keyways on 5 week delivery.
Couplings - Geargrip Sleeves - Precision
Match with hubs from hubs category
This category may be available in the new MBA online store at Couplings - Geargrip Sleeves - Precision.
Related Information:
Couplings - Crowned Tooth Gear - Sleeve Only
Match with hubs from the hubs category
+/- 1.02 mm Axial Displacement. 0.41mm Parallel offset per hub. 1o Angular Displacement. Free axial movement. 19.55 to 88 Nm. 8500 to 14000 rpm. High torque / low inertia.
Related Information:
465LRN Coupling Kavo Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Couplings - Rigid - 2 Piece Clamp - Steel
12L14 Steel
Precision Machined. High torsional load. Non marring, easy to install and adjust. Assemble without moving shafts. Use on hardened shafts, rigid clamp type design, easily machinable. Black finish with alloy steel cap screws. Available with stepped bores and keyways on 5 week delivery.
Couplings - Helical - Economy
Low cost aluminium couplings primarily used for 3D printer stepper motors
Max. Ang Misalignment 5o. Max Parallel Offset 0.25mm. This category may be available in the new MBA online store at Couplings - Helical - Economy.
Related Information:
Couplings - Helical - Standard
0.1 to 16.2 Nm.
Zero backlash. Max. Ang Misalignment 5o. Max Parallel Offset 0.25mm. This category may be available in the new MBA online store at Couplings - Helical - Standard.
Related Information:
Couplings - Neo - Flex
0.71 to 1.27 Nm.
303 stainless steel with 73 durometer neoprene centre. Shaft to shaft insulation. Torsional vibration isolation. Ribbed style are more flexible than smooth style. Bore Tolerances: +0.025 / -0.000.
Related Information:
Couplings - Rigid - 1 Piece Clamp - Steel
12L14 Steel
This category may be available in the new MBA online store at Couplings - Rigid - 1 Piece Clamp - Steel.
Couplings - Rigid - Hobby - Brass
A selection of inexpensive brass couplings for shaft sizes from 2 to 5 mm.
This category may be available in the new MBA online store at Couplings - Rigid - Hobby - Brass.
Related Information:
Couplings - Rigid - Set Screw
0.35 to 5.1 Nm. Includes steel, stainless steel, brass and aluminium.
Quality Class Precision: Bore Tolerance +0.013 / - 0.000 concentric within 0.0127mm T.I.R. Quality Class Commercial: Bore Tolerance +0.051 / -0.000. This category may be available in the new MBA online store at Couplings - Rigid - Set Screw.
Related Information:
Shafts - Flexible - Coupling Ends - Open - Mild Steel
Flexible shafting with coupling ends ready to attach to a fixed shaft.
1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm. This category may be available in the new MBA online store at Shafts - Flexible - Coupling Ends - Open - Mild Steel.
Related Information:
Spacers - Hex - Threaded - Brass
Threaded Hex Spacers. Also known as coupling nuts.
Most items are nickel plated. Refer details recorded against each item. This category may be available in the new MBA online store at Spacers - Hex - Threaded - Brass.
Spacers - Hex - Threaded - Steel
Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.
This category may be available in the new MBA online store at Spacers - Hex - Threaded - Steel.
Spacers - Hex - Threaded - 316 Stainless Steel
Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.
This category may be available in the new MBA online store at Spacers - Hex - Threaded - 316 Stainless Steel.
Spacers - Hex - Threaded - 303-304 Stainless Steel
Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.
This category may be available in the new MBA online store at Spacers - Hex - Threaded - 303-304 Stainless Steel.
Popular Bicycle Hub Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Check Size Before Ordering DT Swiss Hubs Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Gearmotors - Basic - Hobby - 12.1mm Diameter
Small light weight geared motors used in toys and small solar applications
NOTE! These do not have a standard output shaft. The output is a plastic crossed block (see diagram) which is designed to be fitted to a fabricated coupling in O.E.M applications. However, the plastic block would be suitable for drilling and attaching objects with wire for rotating mobile type applications. This category may be available in the new MBA online store at Gearmotors - Basic - Hobby - 12.1mm Diameter.
Knobs - Three Lobe Female - Arched
Also see star knobs
This category may be available in the new MBA online store at Knobs - Three Lobe Female - Arched.
Related Information:
Knobs - Three Lobe Female - Blind Hole - Solid Top
Also see star knobs
This category may be available in the new MBA online store at Knobs - Three Lobe Female - Blind Hole - Solid Top.
Related Information:
Knobs - Three Lobe Female - Soft Touch
Also see star knobs
This category may be available in the new MBA online store at Knobs - Three Lobe Female - Soft Touch.
Related Information:
Knobs - Three Lobe Female - Standard
Also see star knobs
This category may be available in the new MBA online store at Knobs - Three Lobe Female - Standard.
Related Information:
Knobs - Three Lobe Female - Through Hole
Also see star knobs
This category may be available in the new MBA online store at Knobs - Three Lobe Female - Through Hole.
Related Information:
Knobs - Three Lobe Male - Safety
Knob only turns when pressed downwards and turned simultaneously to avoid involuntary turning. Also see star knobs
This category may be available in the new MBA online store at Knobs - Three Lobe Male - Safety.
Related Information:
Knobs - Three Lobe Male - Soft Touch
Also see star knobs
This category may be available in the new MBA online store at Knobs - Three Lobe Male - Soft Touch.
Related Information:
Knobs - Three Lobe Male - Standard
Also see star knobs
This category may be available in the new MBA online store at Knobs - Three Lobe Male - Standard.
Related Information:
Catches - Compression Spring
Three internal compression springs supply up to 30kg of spring tension. Available as padlockable or with secondary catch.
Spring tension compensates for gasket set. Provides exact tension for water tight and air tight seals. This category may be available in the new MBA online store at Catches - Compression Spring.
Gears - Spur - 24DP - 20 Degree - Plastic - Plain
PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. Acetal or Nylon w/ Brass or Stainless Steel Inserts. Clamping or Grub Screw hubs. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.
FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 24DP - 20 Degree - Plastic - Plain.
Gears - Spur - 24DP - 20 Degree - Plastic with Insert
PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. Acetal or Nylon w/ Brass or Stainless Steel Inserts. Clamping or Grub Screw hubs. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.
FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 24DP - 20 Degree - Plastic with Insert.
Pulleys - Timing 2.000mm Pitch GT - 6mm Wide - EZ-Lock
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Use with GT2 or GT3 type belts.
Aluminium Alloy. EZI-LOK Hub Clamps together wit a Socket Head Cap Screw. Socket Cap Screw is Supplied with Pulley. This category may be available in the new MBA online store at Pulleys - Timing 2.000mm Pitch GT - 6mm Wide - EZ-Lock.
Related Information:
Pulleys - Timing 3.000mm Pitch GT - 9mm Wide - EZ-Lock
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide. Use with GT2 or GT3 type belts.
Aluminium Alloy. EZ-Lock hub clamps to the shaft with a socket head cap screw. Cap screw is supplied with the pulley. This category may be available in the new MBA online store at Pulleys - Timing 3.000mm Pitch GT - 9mm Wide - EZ-Lock.
Related Information:
Main Pages
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Miscellaneous Brands Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Screws PDF
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 153564 products in 2095 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
