Small Parts & Bearings - an MBA company

Searched For: Clutches Slip Magnetic Particle No Power Categories


Clutches


Clutches - Slip - Magnetic Particle - No Power
Clutches - Slip - Magnetic Particle - No Power

Also see combined categories:
All Slip Clutches

Requires no power.

Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. This category may be available in the new MBA online store at Clutches - Slip - Magnetic Particle - No Power.


Clutches - Slip - Magnetic Particle - Integral Shaft - No Power
Clutches - Slip - Magnetic Particle - Integral Shaft - No Power

Also see combined categories:
All Slip Clutches

Requires no power.

Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. This category may be available in the new MBA online store at Clutches - Slip - Magnetic Particle - Integral Shaft - No Power.


Clutches - Magnetic Particle 24VDC
Clutches - Magnetic Particle 24VDC

Also see combined categories:
All Magnetic Clutches

Ultrafast Responses.

The input shaft becomes coupled to the output shaft with electrical excitation. Shafts have a flat on the end. Soft or fast start. This category may be available in the new MBA online store at Clutches - Magnetic Particle 24VDC.

Related Information:


Balls - Magnetic
Balls - Magnetic

Also see combined categories:
All Magnetic Balls

Please note that ball magnets are not to be used as toys. These are a strong magnet must be kept away from children as serious harm may result from ingestion.

This category may be available in the new MBA online store at Balls - Magnetic.


Washers - Disc Spring - Plastic
Washers - Disc Spring - Plastic

Also see combined categories:
All Disc Springs

Not for constant spring forces or when high forces are needed. Provides flat spring characteristics and compensates for axial clearances and tolerances. Vibration dampening and noise reduction. Electrical and thermal insulation. Non magnetic - Polysorb(R) material.


Catches - Magnetic - Screw On
Catches - Magnetic - Screw On


Various styles - refer pictures

This category may be available in the new MBA online store at Catches - Magnetic - Screw On.


Catches - Magnetic - Ultra Thin - Heavy Duty
Catches - Magnetic - Ultra Thin - Heavy Duty


Ultra thin strong magnetic catch is perfect for tight areas. Has a full 4kg of magnetic force.

This category may be available in the new MBA online store at Catches - Magnetic - Ultra Thin - Heavy Duty.

Related Information:


Catches - Magnetic - Ultra Thin - Light Duty
Catches - Magnetic - Ultra Thin - Light Duty


Ultra thin strong magnetic catch is perfect for tight areas. Has 2.5 kg of magnetic force.

This category may be available in the new MBA online store at Catches - Magnetic - Ultra Thin - Light Duty.

Related Information:


Shafting - Aluminium - Ceramic Coated
Shafting - Aluminium - Ceramic Coated

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated. This category may be available in the new MBA online store at Shafting - Aluminium - Ceramic Coated.

Related Information:


Screws - Cap - Socket - Nylon
Screws - Cap - Socket - Nylon

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC - UNF - METRIC - Non Conductive - Non Magnetic.

This category may be available in the new MBA online store at Screws - Cap - Socket - Nylon.

Related Information:


Shafting - Aluminium - Ceramic Coated - Tapped
Shafting - Aluminium - Ceramic Coated - Tapped

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated. This category may be available in the new MBA online store at Shafting - Aluminium - Ceramic Coated - Tapped.

Related Information:


Screws - Round Head - Nylon - Slotted
Screws - Round Head - Nylon - Slotted

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC - UNF

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:


Screws - Binder Head - Nylon - Philips
Screws - Binder Head - Nylon - Philips

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC - UNF - Metric

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:


Screws - Binder Head - Nylon - Slotted
Screws - Binder Head - Nylon - Slotted

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC and UNF

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:


Screws - Pan Head - Nylon - Slotted
Screws - Pan Head - Nylon - Slotted

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC - UNF - Metric

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:


Magnets - Rubber and Vinyl
Magnets - Rubber and Vinyl

Also see combined categories:
All Magnets

Magnetic Vinyl Sheets and Magnetic Rubber Strip

This category may be available in the new MBA online store at Magnets - Rubber and Vinyl.


Screws - Fillister Head - Nylon - Slotted
Screws - Fillister Head - Nylon - Slotted

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC - UNF. Cheese head

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:


Screws - Countersunk - Nylon - Slotted
Screws - Countersunk - Nylon - Slotted

Also see combined categories:
All Countersunk Screws
All Plastic Countersunk Screws

Flat Head Countersunk UNC and UNF.

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:


Balls - Stainless Steel - 304 Grade
Balls - Stainless Steel - 304 Grade

Also see combined categories:
All Metallic Balls

A2 Grade. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs.

Tolerances available on request. Grades shown are AFBMA / ISO3290-1. Non annealed. Hardness: Rockwell C: 25-39. Specific Gravity: 7.916. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs. Note! Increase in magnetic permeability may occur due to the grinding process and can be relieved by heating to over 1000 oC. This category may be available in the new MBA online store at Balls - Stainless Steel - 304 Grade.

Related Information:


Balls - Stainless Steel - 316 Grade
Balls - Stainless Steel - 316 Grade

Also see combined categories:
All Metallic Balls

A4 Grade. Very low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities.

Tolerances available on request. Grades shown are AFBMA / ISO3290-1. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972. Low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities. Note! Increase in magnetic permeability may occur due to the grinding process and can be releived by heating to over 1000 oC. This category may be available in the new MBA online store at Balls - Stainless Steel - 316 Grade.

Related Information:


Magnets - Rare Earth - Shielded
Magnets - Rare Earth - Shielded

Also see combined categories:
All Magnets
All Rare Earth Magnets

Insulator shield prevents loss of magnetic flux when inserted into steel components or fixtures

Shielded magnets supply holding forces in limited areas of steel tools, dies and fixtures. This category may be available in the new MBA online store at Magnets - Rare Earth - Shielded.


Screws - Hex Washer Head - Black Nylon
Screws - Hex Washer Head - Black Nylon

Also see combined categories:
All Machine Screws
All Plastic Screws

1/4 UNC and UNF only

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:


Joints - Swivel - Miniature - Steel
Joints - Swivel - Miniature - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.

This category may be available in the new MBA online store at Joints - Swivel - Miniature - Steel.


Joints - Swivel - Knob Style - Steel
Joints - Swivel - Knob Style - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.

This category may be available in the new MBA online store at Joints - Swivel - Knob Style - Steel.


Joints - Swivel - Split Type - Steel
Joints - Swivel - Split Type - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.

This category may be available in the new MBA online store at Joints - Swivel - Split Type - Steel.


Joints - Swivel - Tee Handle - Steel
Joints - Swivel - Tee Handle - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.

This category may be available in the new MBA online store at Joints - Swivel - Tee Handle - Steel.


Joints - Swivel - Wing Knob - Steel
Joints - Swivel - Wing Knob - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.

This category may be available in the new MBA online store at Joints - Swivel - Wing Knob - Steel.


Joints - Swivel - Double Wing Knob - Steel
Joints - Swivel - Double Wing Knob - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.

This category may be available in the new MBA online store at Joints - Swivel - Double Wing Knob - Steel.


Joints - Swivel - Knob Style - Stainless Steel
Joints - Swivel - Knob Style - Stainless Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 303 Stainless Steel.

This category may be available in the new MBA online store at Joints - Swivel - Knob Style - Stainless Steel.


Joints - Swivel - Wing Knob - Stainless Steel
Joints - Swivel - Wing Knob - Stainless Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 303 Stainless Steel.

This category may be available in the new MBA online store at Joints - Swivel - Wing Knob - Stainless Steel.


1900B Planer Makita Parts
1900B Planer Makita Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Workwheel Black and Decker Parts
Workwheel Black and Decker Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


B5006 Bandsaw - Table Mounted GMC Parts
B5006 Bandsaw - Table Mounted GMC Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


BS006 Bandsaw - Table Mounted GMC Parts
BS006 Bandsaw - Table Mounted GMC Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


BSG-151 Belt Sander Ozito Parts
BSG-151 Belt Sander Ozito Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


BSR-1000 Belt Sander Ozito Parts
BSR-1000 Belt Sander Ozito Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


BSR-800 Belt Sander Ozito Parts
BSR-800 Belt Sander Ozito Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


KA85 Belt Sander Black and Decker Parts
KA85 Belt Sander Black and Decker Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


1-3HP Bench Sander 4 Inch GMC Parts
1-3HP Bench Sander 4 Inch GMC Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


6 Inch Bandsaw Vertical Bench Model GMC Parts
6 Inch Bandsaw Vertical Bench Model GMC Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Inserts - Self Tapping - For Wood - Slotted Drive
Inserts - Self Tapping - For Wood - Slotted Drive

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with soft plastics, hard and soft wood, particle board.

Related Information:


Inserts - Self Tapping - For Wood - Slotted Drive - Short
Inserts - Self Tapping - For Wood - Slotted Drive - Short

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into pre-formed or pre-drilled holes and cut their own threads. Perfect for permanent installations.

Made from brass. Install with a screwdriver. Superior holding power in hard and soft woods, particle board and other wood products. Long pilot assists with straight driving into a drilled hole. This category may be available in the new MBA online store at Inserts - Self Tapping - For Wood - Slotted Drive - Short.


Bits - Power
Bits - Power


Power bits for use with power screwdrivers and drills

This category may be available in the new MBA online store at Bits - Power.


Magnets - Alcomax - Power
Magnets - Alcomax - Power

Also see combined categories:
All Magnets
All Alcomax Magnets

Supplied with keeper

This category may be available in the new MBA online store at Magnets - Alcomax - Power.


Tools - Thread Insert - Power Drive - EZ-Lok
Tools - Thread Insert - Power Drive - EZ-Lok

Also see combined categories:
All Tools

Made from stress proof steel. The power drive tool is used for volume installation of EZ-LOK thread inserts.

This category may be available in the new MBA online store at Tools - Thread Insert - Power Drive - EZ-Lok.


Collars - Threaded - Clamp Type - Steel
Collars - Threaded - Clamp Type - Steel

Also see combined categories:
All Threaded Shaft Collars

Offer full radial holding power without marring the shaft.

This category may be available in the new MBA online store at Collars - Threaded - Clamp Type - Steel.

Related Information:


Collars - Threaded - Clamp Type - Stainless Steel
Collars - Threaded - Clamp Type - Stainless Steel

Also see combined categories:
All Threaded Shaft Collars

Offer full radial holding power without marring the shaft.

This category may be available in the new MBA online store at Collars - Threaded - Clamp Type - Stainless Steel.

Related Information:


Leadscrew Nuts - Metric - Round - Metallic
Leadscrew Nuts - Metric - Round - Metallic

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: KSM = Carbon Manganese Steel S300 Pb (11 SMn Pb37) / LRM = Bronze CuSn8P. Carbon Manganese steel can be welded but difficulties may arise with bubbling due to sulphur content. KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights. LRM: Manual or powered control - low and medium rotational speeds - for working under load. For power transmission and continuous use always use bronze nuts not steel.

Related Information:


Gears - Bevel - Module 1.5 - Plastic
Gears - Bevel - Module 1.5 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. This category may be available in the new MBA online store at Gears - Bevel - Module 1.5 - Plastic.

Related Information:


Gears - Bevel - Module 1 - Plastic
Gears - Bevel - Module 1 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. This category may be available in the new MBA online store at Gears - Bevel - Module 1 - Plastic.

Related Information:





Main Pages

About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 144275 products in 2044 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 144275 products in 2044 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.