Clearance Items (Short Delivery Items)


Category Matches

Locking Assemblies

TopHide Pictures

Assemblies - Locking - Flanged
Assemblies - Locking - Flanged

Search Rating: 100%

Also see combined categories:
All Locking Assemblies

Suitable for locking sprockets, pulleys, eccentric shafts.

Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.


Bushes Plastic

TopHide Pictures

Bushes - Plastic - Clip - Double Flanged
Bushes - Plastic - Clip - Double Flanged

Search Rating: 95%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

For use with sheet metal. Used as a light duty split bearing.

Low clearance. Maintenance free. Economical. High Precision. High wear resistance. Light weight. M250 Polymer minus 40 oC to 80 oC (minus 40 Deg F to 176 Deg F).


Rod Ends PTFE Lined

TopHide Pictures

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Rod Ends - Steel - PTFE Lined - Tight Fit - Male

Search Rating: 95%

Also see combined categories:
All Male Rod Ends
All Steel Male Rod Ends

Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.


Hubs

TopHide Pictures

Hubs - Gear and Dial - Single
Hubs - Gear and Dial - Single

Search Rating: 94%

Also see combined categories:
All Hubs

Fairloctm Hubs require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.

Related Information:

Circlips

TopHide Pictures

Circlips - Internal - Inverted
Circlips - Internal - Inverted

Search Rating: 93%

Also see combined categories:
All Internal Circlips

M1308 / JV / INTV / BN830. Retaining rings. Snap Rings (USA).

Inverted lugs seat into the groove for better clearance and cleaner appearance. Good for shielded bearings that pass tightly through the bore or housing. Use recommended installation pliers.


Clamps

TopHide Pictures

Clamps - Gear - Split
Clamps - Gear - Split

Search Rating: 91%

Also see combined categories:
All Gear Clamps

Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.

Related Information:

Clips

TopHide Pictures

Rings - Crescent
Rings - Crescent

Search Rating: 91%

Variation of an E-Clip with an open face. Also known as a C-Clip.

Narrow section height provides good clearance capabilities. Absence of teeth and deep set mean less thrust load ratings than e-clips. For best results install using the recommended applicator tool.

Related Information:

Clamps

TopHide Pictures

Clamps - Gear - Screw Type
Clamps - Gear - Screw Type

Search Rating: 91%

Also see combined categories:
All Gear Clamps

Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.

Related Information:

Bushes Plastic

TopHide Pictures

Bushes - Plastic - Clip - Bevelled Edge
Bushes - Plastic - Clip - Bevelled Edge

Search Rating: 86%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

M250 Polymer minus 40 Deg C to 80 Deg C (minus 40 Deg F to 176 Deg F). Used as a light duty split bearing.

Low clearance. Maintenance free. Economical. High Precision. High wear resistance. Light weight.


Ball Joints

TopHide Pictures

Joints - Ball and Socket - Right Angle - Light Duty
Joints - Ball and Socket - Right Angle - Light Duty

Search Rating: 84%

Light duty ball joints provide a pivot point. They are unhardened and should not be used for high load or high repetition applications. Clearance is not specified, so actual joints may range from very loose to reasonably tight.

Steel Type: Zinc Passivated Induction Hardened. Stainless Steel Type: 303 Grade unhardened. Max. Static push/pull loads are valid for both radial and axial loads. Standard Steel type Ball Stud Tensile strength: Rm = 600 N/mm sq (Not applicable to stainless type). Standard Steel type Housing Tensile strength: Rm = 500 N/mm sq (Not applicable to stainless type).


Clamping Rings

TopHide Pictures

Spiral Rings - Internal - Light Duty
Spiral Rings - Internal - Light Duty

Search Rating: 82%

Also see combined categories:
All Internal Spiral Rings

Includes series CI / VH / UR - Spring Steel and Stainless Steel.

Light duty rings for use in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CI, Smalley: VH, Spirolox and Ramsey: UR.


Circlips

TopHide Pictures

Circlips - External - Inverted
Circlips - External - Inverted

Search Rating: 81%

Also see combined categories:
All External Circlips

N1408 / SHI / 16626 / 4100 / 5108 - Spring Steel and Stainless Steel. Retaining rings. Snap Rings (USA).

Tapered section ring with lugs inverted on the ID to allow use in tight areas with minimal clearance. Less thrust load than standard circlips.


Springs Disc

TopHide Pictures

Washers - Disc Spring - Plastic
Washers - Disc Spring - Plastic

Search Rating: 80%

Also see combined categories:
All Disc Springs

Also known as belleville washers.

Not for constant spring forces or when high forces are needed. Provides flat spring characteristics and compensates for axial clearances and tolerances. Vibration dampening and noise reduction. Electrical and thermal insulation. Non magnetic - Polysorb(R) material.


Linear Bearings

TopHide Pictures

Bearings - Linear - Frelon J Lined - Closed - Precision
Bearings - Linear - Frelon J Lined - Closed - Precision

Search Rating: 76%

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Precision type has closer running clearances.

Related Information:

Bearings - Linear - Frelon J Lined - Closed - Standard
Bearings - Linear - Frelon J Lined - Closed - Standard

Search Rating: 75%

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Standard type has slightly larger running clearances.

Related Information:

Gears Metric Spur

TopHide Pictures

Gears - Spur - Module 0.7 - Plastic
Gears - Spur - Module 0.7 - Plastic

Search Rating: 61%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.700mm. 20o Pressure Angle. Acetal.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.4 - Brass
Gears - Spur - Module 0.4 - Brass

Search Rating: 60%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.5 - Brass
Gears - Spur - Module 0.5 - Brass

Search Rating: 60%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.8 - Brass
Gears - Spur - Module 0.8 - Brass

Search Rating: 60%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.4 - Plastic
Gears - Spur - Module 0.4 - Plastic

Search Rating: 59%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.5 - Plastic
Gears - Spur - Module 0.5 - Plastic

Search Rating: 59%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. Acetal.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.8 - Plastic
Gears - Spur - Module 0.8 - Plastic

Search Rating: 59%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 1.25 - Plastic
Gears - Spur - Module 1.25 - Plastic

Search Rating: 59%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.250mm. 20o Pressure Angle. Acetal.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 1 - Plastic
Gears - Spur - Module 1 - Plastic

Search Rating: 59%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 3 - Plastic
Gears - Spur - Module 3 - Plastic

Search Rating: 59%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 3.000mm. 20o Pressure Angle. Nylon

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.5 - Aluminium
Gears - Spur - Module 0.5 - Aluminium

Search Rating: 59%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. 2024 aluminium

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.8 - Aluminium
Gears - Spur - Module 0.8 - Aluminium

Search Rating: 59%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. 2024 aluminium

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 2.5 - Steel
Gears - Spur - Module 2.5 - Steel

Search Rating: 59%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 2.500mm. 20o Pressure Angle. Carbon steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.4 - Plastic with Insert
Gears - Spur - Module 0.4 - Plastic with Insert

Search Rating: 58%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.4 - Stainless
Gears - Spur - Module 0.4 - Stainless

Search Rating: 58%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. 416 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.5 - Plastic with Insert
Gears - Spur - Module 0.5 - Plastic with Insert

Search Rating: 58%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. Acetal.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.8 - Plastic with Insert
Gears - Spur - Module 0.8 - Plastic with Insert

Search Rating: 58%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 1.25 - Stainless
Gears - Spur - Module 1.25 - Stainless

Search Rating: 58%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.250mm. 20o Pressure Angle. 303 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 1.5 - Plastic
Gears - Spur - Module 1.5 - Plastic

Search Rating: 58%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.500mm. 20o Pressure Angle. Acetal and Nylon

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 1 - Plastic with Insert
Gears - Spur - Module 1 - Plastic with Insert

Search Rating: 58%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle.Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 2 - Steel
Gears - Spur - Module 2 - Steel

Search Rating: 58%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 2.000mm. 20o Pressure Angle. AISI4135 carbon steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 1 - Plastic with Stainless Hub
Gears - Spur - Module 1 - Plastic with Stainless Hub

Search Rating: 57%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.5 - Stainless
Gears - Spur - Module 0.5 - Stainless

Search Rating: 55%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. 303 stainless steel and 416 stainless steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.8 - Stainless
Gears - Spur - Module 0.8 - Stainless

Search Rating: 55%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. 303 stainless steel and 416 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 1 - Stainless
Gears - Spur - Module 1 - Stainless

Search Rating: 55%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. 303 stainless steel and 416 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - Economy - Steel
Pins - Ball Lock - Economy - Steel

Search Rating: 53%

Also see combined categories:
All Ball Lock Pins - Non Marine

Economical pins that can be used in military or conventional equipment. Also called detent pins.

Solid body construction with direct spring loaded ball. Used for locking telescoping tubes, securing bracket assemblies, anchoring clevis fittings, hinge pins, cotter pin replacement or setting up jigs and fixtures. Commercial drill tolerances provide clearance for standard pins. Zinc plated C1144 steel. Not for critical applications. If known pullout strength is required use commercial or industrial pins.


Gears Inch Spur

TopHide Pictures

Gears - Spur - 16DP - 14.5 Degree - Steel
Gears - Spur -  16DP - 14.5 Degree - Steel

Search Rating: 50%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.588mm (1/16 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 16 Diametrical Pitch. Approx 4.99mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 72DP - Stainless
Gears - Spur -  72DP - Stainless

Search Rating: 50%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.353mm (1/72 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 24DP - 14.5 Degree - Brass
Gears - Spur -  24DP - 14.5 Degree - Brass

Search Rating: 48%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 32DP - 14.5 Degree - Brass
Gears - Spur -  32DP - 14.5 Degree - Brass

Search Rating: 48%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 32DP - 20 Degree - Plastic
Gears - Spur -  32DP - 20 Degree - Plastic

Search Rating: 48%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 48DP - 14.5 Degree - Brass
Gears - Spur -  48DP - 14.5 Degree - Brass

Search Rating: 48%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.529mm (1/48 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 64DP - Aluminium
Gears - Spur -  64DP - Aluminium

Search Rating: 48%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.397mm (1/64 in.). 20o Pressure Angle. 5052 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 72DP - Aluminium
Gears - Spur -  72DP - Aluminium

Search Rating: 48%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.353mm (1/72 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 16DP - 20 Degree - Plastic
Gears - Spur -  16DP - 20 Degree - Plastic

Search Rating: 48%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.588mm (1/16 in.). 20o Pressure Angle. Nylon and acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 16 Diametrical Pitch. Approx 4.99mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 32DP - 14.5 Degree - Plastic
Gears - Spur -  32DP - 14.5 Degree - Plastic

Search Rating: 48%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 48DP - 14.5 Degree - Plastic
Gears - Spur -  48DP - 14.5 Degree - Plastic

Search Rating: 48%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.529mm (1/48 in.). 14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 24DP - 14.5 Degree - Steel
Gears - Spur -  24DP - 14.5 Degree - Steel

Search Rating: 47%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system. Carbon Steel.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 32DP - 20 Degree - Plastic with Insert
Gears - Spur -  32DP - 20 Degree - Plastic with Insert

Search Rating: 47%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 48DP - 20 Degree - Stainless
Gears - Spur -  48DP - 20 Degree - Stainless

Search Rating: 46%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.529mm (1/48 in.). 20o Pressure Angle. 303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 48DP - 20 Degree - Aluminium
Gears - Spur -  48DP - 20 Degree - Aluminium

Search Rating: 45%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.529mm (1/48 in.). 20o Pressure Angle. 2024 and 5052 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - Economy - Stainless Steel
Pins - Ball Lock - Economy - Stainless Steel

Search Rating: 37%

Also see combined categories:
All Ball Lock Pins - Non Marine

Economical pins that can be used in military or conventional equipment. Type 303 stainless steel. Also called detent pins.

Solid body construction with direct spring loaded ball. Used for locking telescoping tubes, securing bracket assemblies, anchoring clevis fittings, hinge pins, cotter pin replacement or setting up jigs and fixtures. Stainless steel pins used in aircraft industry, food processing machinery, marine equipment, laboratory and testing equipment. Commercial drill tolerances provide clearance for standard pins. 303 stainless steel. Not for critical applications. If known pullout strength is required use commercial or industrial pins.



Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 124116 products in 3089 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.