Small Parts & Bearings - an MBA company

Clamps Timing Belt Categories


Clamps


Clamps - Timing Belt
Clamps - Timing Belt


Used for locking the ends of timing belt lengths used in reciprocating applications

Suits single and double sided belts. Black Polycarbonate with 303 stainless fasteners. Low inertia. Compact Design. Patent Pending. For MXL, XL, GT 2mm, GT 3mm, GT 5mm, HTD 3mm and HTD 5mm belt pitches.

Related Information:


Clamp Kits - Timing Belt
Clamp Kits - Timing Belt


Used for locking the ends of timing belt lengths used in linear applications

Suits single sided belts only. Aluminium. Screws, hex nuts and washers included.

Related Information:


You may also be interested in

Pulleys Timing GT2 2mm


Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock
Pulleys - Timing -  2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.

Aluminium Alloy. EZI-LOK Hub Clamps together wit a Socket Head Cap Screw. Socket Cap Screw is Supplied with Pulley.

Related Information:


Pulleys Timing GT2 3mm


Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - EZ-Lock
Pulleys - Timing -  3.000mm Pitch - GT2 -  9mm Wide - EZ-Lock

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide.

Aluminium Alloy. EZ-Lock hub clamps to the shaft with a socket head cap screw. Cap screw is supplied with the pulley.

Related Information:


Belts Timing 40DP LT Pitch


Belts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 3.2mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 4.8mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 6.4mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 7.9mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts Timing AT10 10mm


Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Breaking strength is not indicative of working strength.

Related Information:


Belts Timing AT5 5mm


Belts - Timing - 5.000mm Pitch - AT5 - 10mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 10mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 5.000mm Pitch - AT5 - 12mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 12mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 5.000mm Pitch - AT5 - 16mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 16mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 5.000mm Pitch - AT5 - 20mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 20mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 5.000mm Pitch - AT5 - 25mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 5.000mm Pitch - AT5 - 6mm Wide
Belts - Timing -  5.000mm Pitch - AT5 -  6mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 5.000mm Pitch - AT5 - 8mm Wide
Belts - Timing -  5.000mm Pitch - AT5 -  8mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts Timing GT2 -14mm


Belts - Timing - 14.000mm Pitch - GT2 - 115mm Wide
Belts - Timing - 14.000mm Pitch - GT2 - 115mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 Series Metric Timing Belts

Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 14.000mm Pitch - GT2 - 170mm Wide
Belts - Timing - 14.000mm Pitch - GT2 - 170mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 Series Metric Timing Belts

Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 14.000mm Pitch - GT2 - 40mm Wide
Belts - Timing - 14.000mm Pitch - GT2 -  40mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 Series Metric Timing Belts

Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 14.000mm Pitch - GT2 - 55mm Wide
Belts - Timing - 14.000mm Pitch - GT2 -  55mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 Series Metric Timing Belts

Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 14.000mm Pitch - GT2 - 85mm Wide
Belts - Timing - 14.000mm Pitch - GT2 -  85mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 Series Metric Timing Belts

Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.

Related Information:


Belts Timing GT2 2mm


Belts - Timing - 2.000mm Pitch - GT2 - 16mm Wide
Belts - Timing -  2.000mm Pitch - GT2 - 16mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 2.000mm Pitch - GT2 - 3mm Wide
Belts - Timing -  2.000mm Pitch - GT2 -  3mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 2.000mm Pitch - GT2 - 4mm Wide
Belts - Timing -  2.000mm Pitch - GT2 -  4mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. For easy ready selected sets of timing belts and pulleys please see the HES website.

Related Information:


Belts - Timing - 2.000mm Pitch - GT2 - 6mm Wide
Belts - Timing -  2.000mm Pitch - GT2 -  6mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 2.000mm Pitch - GT2 - 9mm Wide
Belts - Timing -  2.000mm Pitch - GT2 -  9mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 2.000mm Pitch - GT2 - Clean - 6mm Wide
Belts - Timing -  2.000mm Pitch - GT2 - Clean - 6mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

PowerGrip(R) TruMotion(R) Timing Belts in 2.000mm.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. Pitch (P) - 2.00mm, Tooth Height (H) - 0.76mm, Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:


Belts Timing GT2 3mm


Belts - Timing - 3.000mm Pitch - GT2 - 15mm Wide
Belts - Timing -  3.000mm Pitch - GT2 - 15mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - GT2 - 6mm Wide
Belts - Timing -  3.000mm Pitch - GT2 -  6mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - GT2 - 9mm Wide
Belts - Timing -  3.000mm Pitch - GT2 -  9mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - GT2 - Double Sided - 15mm Wide
Belts - Timing -  3.000mm Pitch - GT2 - Double Sided - 15mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - GT2 - Double Sided - 6mm Wide
Belts - Timing -  3.000mm Pitch - GT2 - Double Sided -  6mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts Double Sided

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - GT2 - Double Sided - 9mm Wide
Belts - Timing -  3.000mm Pitch - GT2 - Double Sided -  9mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts Double Sided

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts Timing GT2 5mm


Belts - Timing - 5.000mm Pitch - GT2 - 15mm Wide
Belts - Timing -  5.000mm Pitch - GT2 - 15mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 5.000mm Pitch - GT2 - 25mm Wide
Belts - Timing -  5.000mm Pitch - GT2 - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:


Belts - Timing - 5.000mm Pitch - GT2 - 9mm Wide
Belts - Timing -  5.000mm Pitch - GT2 -  9mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 5.000mm Pitch - GT2 - Double Sided - 15mm Wide
Belts - Timing -  5.000mm Pitch - GT2 - Double Sided - 15mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 Series Metric Timing Belts Double Sided

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 5.00mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 5.000mm Pitch - GT2 - Double Sided - 9mm Wide
Belts - Timing -  5.000mm Pitch - GT2 - Double Sided -  9mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 Series Metric Timing Belts Double Sided

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 5.00mm. Breaking strength is not indicative of working strength.

Related Information:


Belts Timing GT2 8mm


Belts - Timing - 8.000mm Pitch - GT2 - 12mm Wide
Belts - Timing -  8.000mm Pitch - GT2 -  12mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 Series Metric Timing Belts

Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 8.000mm Pitch - GT2 - 20mm Wide
Belts - Timing -  8.000mm Pitch - GT2 -  20mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 Series Metric Timing Belts

Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 8.000mm Pitch - GT2 - 30mm Wide
Belts - Timing -  8.000mm Pitch - GT2 -  30mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 Series Metric Timing Belts

Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 8.000mm Pitch - GT2 - 50mm Wide
Belts - Timing -  8.000mm Pitch - GT2 -  50mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 Series Metric Timing Belts

Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 8.000mm Pitch - GT2 - 85mm Wide
Belts - Timing -  8.000mm Pitch - GT2 -  85mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 Series Metric Timing Belts

Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.

Related Information:


Belts Timing H Pitch 12.7mm


Belts - Timing - 12.700mm Pitch - H - 15.9mm Wide
Belts - Timing - 12.700mm Pitch - H - 15.9mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 127032 products in 2380 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 127032 products in 2380 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.