Small Parts & Bearings - an MBA company

Circlips External Grooveless Categories


Circlips


Circlips - External - Grooveless
Circlips - External - Grooveless

Also see combined categories:
All External Circlips

Includes MIL-R-21248/MS 90707 - Styles M1440 / Ellison GR / Seeger G and GA. Retaining rings. Snap Rings (USA).

Reusable tapered section rings for grooveless shafts like plastics, tubes or castings. Can be used where adjustable ring placement is desired - like progressively tightening a compression spring. This category may be available in the new MBA online store at Circlips - External - Grooveless.

Related Information:


Circlips - External - Bevelled
Circlips - External - Bevelled

Also see combined categories:
All External Circlips

N1402 / VSH / 5102 / 16630. Retaining rings. Snap Rings (USA).

A 15 Deg. bevel on the inside diameter to be fitted to a 15% bevel on the load bearing groove wall. Will yield rigid end-play take-up of manufacturing tolerances or wear on the retained part. Used in greasy or oily environments. This category may be available in the new MBA online store at Circlips - External - Bevelled.

Related Information:


Circlips - External - Inverted
Circlips - External - Inverted

Also see combined categories:
All External Circlips

N1408 / SHI / 16626 / 4100 / 5108 - Spring Steel and Stainless Steel. Retaining rings. Snap Rings (USA).

Tapered section ring with lugs inverted on the ID to allow use in tight areas with minimal clearance. Less thrust load than standard circlips. This category may be available in the new MBA online store at Circlips - External - Inverted.

Related Information:


Circlips - External - Standard - Berryllium Copper
Circlips - External - Standard - Berryllium Copper

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / N1400 / D1460. Retaining rings. Snap Rings (USA).

This category may be available in the new MBA online store at Circlips - External - Standard - Berryllium Copper.

Related Information:


Circlips - External - Standard - Carbon Steel
Circlips - External - Standard - Carbon Steel

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / D1400 / N1400 / D1460. Retaining rings. Snap Rings (USA).

Plain carbon steel. This category may be available in the new MBA online store at Circlips - External - Standard - Carbon Steel.

Related Information:


Circlips - External - Standard - Stainless Steel
Circlips - External - Standard - Stainless Steel

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / D1400 / N1400 / D1460. PH15-7 Mo Stainless Steel. Retaining rings. Snap Rings (USA).

PH15-7 Mo Stainless Steel. This category may be available in the new MBA online store at Circlips - External - Standard - Stainless Steel.

Related Information:


Circlips - External - Standard - Zinc Plated
Circlips - External - Standard - Zinc Plated

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / D1400 / N1400 / D1460. Retaining rings. Snap Rings (USA).

Zinc plated carbon steel. This category may be available in the new MBA online store at Circlips - External - Standard - Zinc Plated.

Related Information:


Circlips - External - Tabbed
Circlips - External - Tabbed

Also see combined categories:
All External Circlips

DIN 983 / D2100 / AK. Retaining rings. Snap Rings (USA).

External tabs are concentrically positioned for positioning in a concealed assembly. Tabs act as spacers for securing machine components. Conforming to DIN 983. This category may be available in the new MBA online store at Circlips - External - Tabbed.

Related Information:


You may also be interested in

Tools Circlip


Tools - Circlip Pliers - External
Tools - Circlip Pliers - External

Also see combined categories:
All Tools

External circlip pliers including standard and ratchet type.

Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected. This category may be available in the new MBA online store at Tools - Circlip Pliers - External.


Circlips


Wire Rings - External - Round Section
Wire Rings - External - Round Section

Also see combined categories:
All External Circlips

DIN7993A / RW / BN825. Retaining rings. Snap Rings (USA). Round section circlips.

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins. This category may be available in the new MBA online store at Wire Rings - External - Round Section.

Related Information:


Tools Circlip


Tools - Circlip Pliers - Reversible
Tools - Circlip Pliers - Reversible

Also see combined categories:
All Tools

Reversible circlip pliers for internal and external circlips.

Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected. This category may be available in the new MBA online store at Tools - Circlip Pliers - Reversible.


Snap Rings - External - Basic
Snap Rings - External - Basic

Also see combined categories:
All External Snaprings

Includes series M3200 / SP / ESP / M2400 / SW snaprings. Similar to a circlip without the lugs.

Carbon sping steel. Used on the outside diameter of a bearing, shaft or similar equipment. This category may be available in the new MBA online store at Snap Rings - External - Basic.


Snap Rings - External - Stainless Steel
Snap Rings - External - Stainless Steel

Also see combined categories:
All External Snaprings

Includes series M3200 / SP / ESP / M2400 / SW snaprings. Similar to a circlip without the lugs.

301 S11/S22 Stainless Steel. Used on the outside diameter of a bearing, shaft or similar equipment. This category may be available in the new MBA online store at Snap Rings - External - Stainless Steel.


Spiral Rings - External - Heavy Duty - Carbon Steel
Spiral Rings - External - Heavy Duty - Carbon Steel

Also see combined categories:
All External Spiral Rings
All External Carbon Steel Spiral Rings

AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2. This category may be available in the new MBA online store at Spiral Rings - External - Heavy Duty - Carbon Steel.


Spiral Rings - External - Heavy Duty - Stainless Steel
Spiral Rings - External - Heavy Duty - Stainless Steel

Also see combined categories:
All External Spiral Rings
All External Stainless Steel Spiral Rings

AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2. This category may be available in the new MBA online store at Spiral Rings - External - Heavy Duty - Stainless Steel.


Spiral Rings - External - Light Duty - Carbon Steel
Spiral Rings - External - Light Duty - Carbon Steel

Also see combined categories:
All External Spiral Rings
All External Carbon Steel Spiral Rings

Includes series CE / VS / US - Spring Steel

Light duty single turn rings used in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CE, Smalley: VS, Spirolox and Ramsey: US.


Spiral Rings - External - Light Duty - Stainless Steel
Spiral Rings - External - Light Duty - Stainless Steel

Also see combined categories:
All External Spiral Rings
All External Stainless Steel Spiral Rings

Includes series CE / VS / US - Stainless Steel.

Light duty single turn rings used in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CE, Smalley: VS, Spirolox and Ramsey: US.


Spiral Rings - External - Medium Duty - Carbon Steel
Spiral Rings - External - Medium Duty - Carbon Steel

Also see combined categories:
All External Spiral Rings
All External Carbon Steel Spiral Rings

AE / WS / AS3218 / RS / MIL-R-27426A1 - Spring Steel

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AE, Smalley: WS, Spirolox and Ramsey: RS, Aerospace AS3218, MIL-R-27426A1. This category may be available in the new MBA online store at Spiral Rings - External - Medium Duty - Carbon Steel.


Spiral Rings - External - Medium Duty - Stainless Steel
Spiral Rings - External - Medium Duty - Stainless Steel

Also see combined categories:
All External Spiral Rings
All External Stainless Steel Spiral Rings

AE / WS / AS3218 / RS / MIL-R-27426A1 - Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AE, Smalley: WS, Spirolox and Ramsey: RS, Aerospace AS3218, MIL-R-27426A1. This category may be available in the new MBA online store at Spiral Rings - External - Medium Duty - Stainless Steel.


Spiral Rings - External - Medium-Heavy Duty - Carbon Steel
Spiral Rings - External - Medium-Heavy Duty - Carbon Steel

Also see combined categories:
All External Spiral Rings
All External Carbon Steel Spiral Rings

AME / WST / RST - Spring Steel

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AME, Smalley: WST, Spirolox and Ramsey: RST. This category may be available in the new MBA online store at Spiral Rings - External - Medium-Heavy Duty - Carbon Steel.


Spiral Rings - External - Medium-Heavy Duty - Stainless Steel
Spiral Rings - External - Medium-Heavy Duty - Stainless Steel

Also see combined categories:
All External Spiral Rings
All External Stainless Steel Spiral Rings

AME / WST / RST - Stainless Steel.

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AME, Smalley: WST, Spirolox and Ramsey: RST. This category may be available in the new MBA online store at Spiral Rings - External - Medium-Heavy Duty - Stainless Steel.


Pins - Hitch - External
Pins - Hitch - External

Also see combined categories:
All External Hitch Pins

Similar to R-Clips, but designed for both arms to fit around a shaft groove rather thand having one arm through a bored hole.

This category may be available in the new MBA online store at Pins - Hitch - External.

Related Information:


Washers - Lock - External Tooth - Spring Steel
Washers - Lock - External Tooth - Spring Steel

Also see combined categories:
All External Tooth Lock Washers
All Lock Washers

Dimensions are nominal and may vary between batches. This category may be available in the new MBA online store at Washers - Lock - External Tooth - Spring Steel.


Washers - Lock - External Tooth - Stainless Steel
Washers - Lock - External Tooth - Stainless Steel

Also see combined categories:
All External Tooth Lock Washers
All Lock Washers

Dimensions are nominal and may vary between batches. This category may be available in the new MBA online store at Washers - Lock - External Tooth - Stainless Steel.


Pins - Taper - Imperial - Extractable - External Thread - Stainless Steel
Pins - Taper - Imperial - Extractable - External Thread - Stainless Steel

Also see combined categories:
All Imperial Taper Pins

Imperial Sizes Tapered 1:48 (1/4 in. per foot). Standard sizes numbers 0 to 14.

Threaded externally for easy extraction.

Related Information:


Pins - Taper - Metric - Extractable - External Thread
Pins - Taper - Metric - Extractable - External Thread

Also see combined categories:
All Metric Taper Pins

Metric Sizes Tapered 1:50 and threaded externally for easy extraction.

DIN 7977. This category may be available in the new MBA online store at Pins - Taper - Metric - Extractable - External Thread.

Related Information:


Check Size Before Ordering Shimano External BB Pre 2006 Parts
Check Size Before Ordering Shimano External BB Pre 2006 Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Circlips - Internal - Bevelled
Circlips - Internal - Bevelled

Also see combined categories:
All Internal Circlips

N1302 / VHO / 16631 / 9002 / N5002. Retaining rings. Snap Rings (USA).

A 15 Deg. bevel on the outside diameter to be fitted to a 15% bevel on the load bearing groove wall. Will yield rigid end-play take-up of manufacturing tolerances or wear on the retained part. Used in greasy or oily environments. This category may be available in the new MBA online store at Circlips - Internal - Bevelled.

Related Information:


Circlips - Internal - Inverted
Circlips - Internal - Inverted

Also see combined categories:
All Internal Circlips

M1308 / JV / INTV / BN830. Retaining rings. Snap Rings (USA).

Inverted lugs seat into the groove for better clearance and cleaner appearance. Good for shielded bearings that pass tightly through the bore or housing. Use recommended installation pliers. This category may be available in the new MBA online store at Circlips - Internal - Inverted.

Related Information:


Circlips - Internal - Standard - Carbon Steel
Circlips - Internal - Standard - Carbon Steel

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).

Plain carbon steel. Tolerances on request. This category may be available in the new MBA online store at Circlips - Internal - Standard - Carbon Steel.

Related Information:


Circlips - Internal - Standard - Stainless Steel
Circlips - Internal - Standard - Stainless Steel

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. PH15-7 Mo Stainless Steel. Retaining rings. Snap Rings (USA).

PH15-7 Mo Stainless Steel. Tolerances on request. This category may be available in the new MBA online store at Circlips - Internal - Standard - Stainless Steel.

Related Information:


Circlips - Internal - Standard - Zinc Plated
Circlips - Internal - Standard - Zinc Plated

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).

Zinc plated carbon steel. Tolerances on request. This category may be available in the new MBA online store at Circlips - Internal - Standard - Zinc Plated.

Related Information:


Circlips - Internal - Tabbed
Circlips - Internal - Tabbed

Also see combined categories:
All Internal Circlips

DIN984 / D2000 / Seeger JK. Retaining rings. Snap Rings (USA).

Internal tabs are concentrically positioned for a concealed assembly. Tabs act as spacers for securing machine components. This category may be available in the new MBA online store at Circlips - Internal - Tabbed.

Related Information:


Tools - Circlip Pliers - Internal
Tools - Circlip Pliers - Internal

Also see combined categories:
All Tools

Internal circlip pliers including standard and ratchet type.

Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected. This category may be available in the new MBA online store at Tools - Circlip Pliers - Internal.


E-Clips - Bowed
E-Clips - Bowed

Also see combined categories:
All E-Clips

For end play take up.

Thickness tolerance +/- 0.025. This category may be available in the new MBA online store at E-Clips - Bowed.


E-Clips - Klipring
E-Clips - Klipring

Also see combined categories:
All E-Clips

Also known as Poodle Rings - Imperial - N1504 / NKP

This category may be available in the new MBA online store at E-Clips - Klipring.


E-Clips - Basic - Berrylium Copper
E-Clips - Basic - Berrylium Copper

Also see combined categories:
All E-Clips

Basic imperial and metric e-clips DIN6799 and N1500. Berrylium Copper.

Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip. This category may be available in the new MBA online store at E-Clips - Basic - Berrylium Copper.

Related Information:


E-Clips - Basic - Carbon Steel
E-Clips - Basic - Carbon Steel

Also see combined categories:
All E-Clips

Basic imperial and metric e-clips DIN6799 and N1500. Carbon spring steel including zinc plated and plain.

Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip. Includes plain and zinc plated. This category may be available in the new MBA online store at E-Clips - Basic - Carbon Steel.

Related Information:


E-Clips - Basic - Stainless Steel
E-Clips - Basic - Stainless Steel

Also see combined categories:
All E-Clips

Basic imperial and metric e-clips DIN6799 and N1500. Stainless Steel PH15-7 Mo.

Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip. This category may be available in the new MBA online store at E-Clips - Basic - Stainless Steel.

Related Information:


Wire Rings - Internal - Round Section
Wire Rings - Internal - Round Section

Also see combined categories:
All Internal Circlips

Includes DIN7993B / RB / M1700 / BN826. Retaining rings. Snap Rings (USA). Round section circlips.

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins. This category may be available in the new MBA online store at Wire Rings - Internal - Round Section.

Related Information:


Tools - E-Clip Applicators
Tools - E-Clip Applicators

Also see combined categories:
All Tools

Assists with assembly e-clip application. Each tool is designed to suit one or two sizes only. This category may be available in the new MBA online store at Tools - E-Clip Applicators.


Inserts - Thread Repair - EZ-Lok - Selection Kits
Inserts - Thread Repair - EZ-Lok - Selection Kits

Also see combined categories:
All EZ Lok insert Kits

Contains a selection of E-Z Lok inserts

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Related Information:


Snap Rings - Internal - Basic
Snap Rings - Internal - Basic

Also see combined categories:
All Internal Snaprings

M2300 / SB / ESB Snaprings. Like an internal circlip without the lugs.

Applications include gear systems, securing needle bearings and to act as spacers. Used on the inside bore diameter of a housing or similar. This category may be available in the new MBA online store at Snap Rings - Internal - Basic.


Pins - Clevis - Zinc Plated - Groove Locking
Pins - Clevis - Zinc Plated - Groove Locking

Also see combined categories:
All Clevis Pins

Match with a suitable E-Clip or Circlip to suit groove size shown in listings

In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Sinc plated low carbon steel. Grooved end to suit retaining clip instead of pin. This category may be available in the new MBA online store at Pins - Clevis - Zinc Plated - Groove Locking.

Related Information:


Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel
Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel

Also see combined categories:
All EZ Lok inserts

Easy to install with a standard tap, bolt and wrench.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Related Information:


Inserts - Thread Repair - EZ-Lok - Solid Stainless Steel
Inserts - Thread Repair - EZ-Lok - Solid Stainless Steel

Also see combined categories:
All EZ Lok inserts

Easy to install with a standard tap, bolt and wrench.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Simply drill and tap the hole to suit the external thread. Install with a bolt and wrench. Metric, UNC and UNF.

Related Information:


Pins - Clevis - Stainless Steel 300 Grade - Groove Locking
Pins - Clevis - Stainless Steel 300 Grade  - Groove Locking

Also see combined categories:
All Clevis Pins

Match with a suitable E-Clip or Circlip to suit groove size shown in listings

In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Grooved end to suit retaining clip instead of pin. This category may be available in the new MBA online store at Pins - Clevis - Stainless Steel 300 Grade - Groove Locking.

Related Information:


Slides - Linear - Non Recirculating Ball - Standard
Slides - Linear - Non Recirculating Ball - Standard

Also see combined categories:
All Linear Slides

The BSP precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.

Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100oC (Constant), +120oC (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants.


Inserts - Thread Repair - EZ-Lok - Individual Kits
Inserts - Thread Repair - EZ-Lok - Individual Kits

Also see combined categories:
All EZ Lok insert Kits

Contains 20 inserts per kit along with a standard tap, drill bit and installation tool. Installation tool is not needed but will make multiple installations easier.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Related Information:


Bearings - Linear - Ball - Miniature - Super High Precision
Bearings - Linear - Ball - Miniature - Super High Precision

Also see combined categories:
All Closed Linear Ball Bearings

High Precision Corrosion Resistant Miniature Linear Bearings.

High Precision Swiss Made, Accurate Guiding, Smooth Running. High Load Capacity. Tolerances --- d (+0.008 / -0.000 mm) D (+0.000 / -0.010 mm). Recommended Outer ring fitted with interferance of 1-3 Microns or retained by Circlips. Shafts (not included) should be 60-63 Rockwell C hardness with tolerances +0.000 / -0.006 mm.

Related Information:





Main Pages

About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 138615 products in 2015 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 138615 products in 2015 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.