Small Parts & Bearings - an MBA company

Covid-19 Update!! 27th March 2020 - Current supply status.

Allow a few days delay for all deliveries due to quarantine precautions. Allow a few days delay for all pre-ordered items.

We are only trading with phone and email sales as per usual, but if legislation requires us to cease trading our emegency contacts will be available to those who might need them.

Hospitals, medical and bio research teams please email us if you feel you might need emergency contacts for equipment spare parts.

Check Size Before Ordering Dt Swiss Hubs Parts Categories


Pushbike Bearings


Check Size Before Ordering DT Swiss Hubs Parts
Check Size Before Ordering DT Swiss Hubs Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Check Size Before Ordering BB30 Parts
Check Size Before Ordering BB30 Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Check Size Before Ordering FSA Parts
Check Size Before Ordering FSA Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Check Size Before Ordering ISIS Parts
Check Size Before Ordering ISIS Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Check Size Before Ordering BMX MID Parts
Check Size Before Ordering BMX MID Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Check Size Before Ordering Canondale Lefty Parts
Check Size Before Ordering Canondale Lefty Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Check Size Before Ordering Specialized Roubaix Parts
Check Size Before Ordering Specialized Roubaix Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Check Size Before Ordering Sram Truvativ Parts
Check Size Before Ordering Sram Truvativ Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Check Size Before Ordering Giant Tapered OD2 Road Overdrive2 Parts
Check Size Before Ordering Giant Tapered OD2 Road Overdrive2 Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Check Size Before Ordering Shimano External BB Pre 2006 Parts
Check Size Before Ordering Shimano External BB Pre 2006 Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Size List Popular Bicycle Hub Parts
Size List Popular Bicycle Hub Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Rod - Round - Aluminium
Rod - Round - Aluminium

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:


Rod - Round - Brass
Rod - Round - Brass

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:


Rod - Round - Stainless Steel
Rod - Round - Stainless Steel

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:


Engine Parts - OS
Engine Parts - OS

Also see combined categories:
All Engine Parts

Carburettors - Connecting Rods - Cover Plates - Crankcases - Crankshafts - Cylinders - Gaskets - Heatsink - O-Rings - Pins - Pistons - Screws - Valves and more

Use this list in conjunction with your spare parts manual to ensure you are ordering the correct parts.


Tube - Round - Aluminium
Tube - Round - Aluminium

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:


Tube - Round - Brass
Tube - Round - Brass

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:


Tube - Round - Copper
Tube - Round - Copper

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:


Nuts - Hexagonal - Brass
Nuts - Hexagonal - Brass

Also see combined categories:
All Nuts

UNC - UNF - BA - METRIC.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. Nuts marked as type SCALE have the same dimension across flats as the brass hex head screw of the same thread size.


Size List Fairwheel Bicycle Parts
Size List Fairwheel Bicycle Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Size List Popular Bicycle Headset Parts
Size List Popular Bicycle Headset Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Size List Mountain Bike Suspension Pivot Parts
Size List Mountain Bike Suspension Pivot Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Size List Popular Bicycle Bottom Bracket Parts
Size List Popular Bicycle Bottom Bracket Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Tube - Round - Stainless Steel
Tube - Round - Stainless Steel

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:


Drylin Linear Assembly Parts - Guide Rails Only
Drylin Linear Assembly Parts - Guide Rails Only

Also see combined categories:
All Drylin Assembly Parts

These rails require a matching carriage as listed in a separate category. Match by size.

Slide Rail: Extruded Aluminium Construction Material: Al Mg Si 0.5. Coating: Hard anodised, 50um Hardness: 500HV. Matching components listed in separate category.

Related Information:


Drylin Linear Assembly Parts - Carriage Only
Drylin Linear Assembly Parts - Carriage Only

Also see combined categories:
All Drylin Assembly Parts

Linear sliding motion. Plain and Locking Types. These carriages require a matching guide rail or matching rack and pinion. Match by size.

Drylin(R) T linear guides are maintenance free and run without additional lubrication. Consequently, they are also suitable for use in damp or dirty environments. Available with a manually operated clamp to achieve a force fit at any desired point along the travel path. The wing screw is used to clamp the slide in place of the guide. Matching components listed in separate category.

Related Information:


Pins - Clevis - Zinc Plated
Pins - Clevis - Zinc Plated

Also see combined categories:
All Clevis Pins

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Made from low carbon steel.

Related Information:


Joints - Clevis - Spring Clips
Joints - Clevis - Spring Clips


Clips only, joints ordered separately. Made from 9SMn steel. Used like a clevis pin but with a clip to hold them to the body of the clevis joint. Check clevis joint body size for suitability.

Steel 9 SMn 28K (550-700 N/mm2). See also yokes.

Related Information:


Washers - Self Aligning - Sets - Stainless Steel
Washers - Self Aligning - Sets - Stainless Steel

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers

AISI 303 Stainless Steel. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.


Washers - Self Aligning - Sets - Hardened Steel
Washers - Self Aligning - Sets - Hardened Steel

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers

Hardened steel 9 S Mn Pb 28 K DIN 6319. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.


Wearstrips - Graphite Plug
Wearstrips - Graphite Plug

Also see combined categories:
All Wear Strips

Self-Lube wearstrips provide effective and economical means of controlling and guiding linear motions, especially in large load applications.

Made of solid aluminum bronze with self-lubricating graphite plugs. Furnished semi-finished and are able to be cut to size and finished. Plugs are 25.4mm centres. Drill mounting holes either between or through graphite plugs. Before drilling break out graphite.


Nuts - Hexagonal - Nylon
Nuts - Hexagonal - Nylon

Also see combined categories:
All Nuts

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Nuts - Hexagonal - Aluminium
Nuts - Hexagonal - Aluminium

Also see combined categories:
All Nuts

METRIC.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Related Information:


Nuts - Hexagonal - Nylon - Self Tapping
Nuts - Hexagonal - Nylon - Self Tapping

Also see combined categories:
All Nuts

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Bushings - QD
Bushings - QD


Used with QD type cast iron vee pulleys, timing pulleys, sprockets, poly vee pulleys and other parts designed specifically for use with a QD bushing

Similar to a taperlock bush, but not interchangeable. QD bushings like taperlock bushings allow for use of a single stock pulley for many applications with different shaft sizes. Select the correct QD series to suit the pulley.

Related Information:


Elements - Locking
Elements - Locking

Also see combined categories:
All Locking Assemblies

2.4 to 2200 Nm, 6-80mm Bores

ETG 100 High Strength Steel for sizes up to 55mm bore. C60 Steel for sizes over 55mm bore. Recommended machining tolerances Shaft h8, Hub H8.


Nuts - Hexagonal - Half - Stainless Steel
Nuts - Hexagonal - Half - Stainless Steel

Also see combined categories:
All Nuts

UNC - UNF - METRIC

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Oil Seals - Nitrile Rubber
Oil Seals - Nitrile Rubber

Also see combined categories:
All Oil Seals

DIN 3760 - General purpose grease and oil sealing. Note - metal cased and rubber cased seals may be interchanged at our discretion. If one or the other is specifically required please let us know when ordering.

Operating Temp. Range: -30oC to +90oC. The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.


Nuts - Hexagonal - Steel
Nuts - Hexagonal - Steel

Also see combined categories:
All Nuts

UNC - UNF - BA - METRIC. Plain and Zinc Plated.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Inserts - Thread Repair - Recoil
Inserts - Thread Repair - Recoil

Also see combined categories:
All Recoil Inserts and Kits

Recoil inserts are screwed directly into an enlarged tapped hole. Replacement inserts for your kit.

Stainless inserts. Replacement Individual Inserts - Require full kit to obtain correct tap. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.


Nuts - Hexagonal - Stainless Steel
Nuts - Hexagonal - Stainless Steel

Also see combined categories:
All Nuts

UNC - UNF - BA - METRIC - BSW - Course - Fine - Extra Fine.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Pulleys - Timing - 12.700mm Pitch - H - 25.4mm Wide - Through Bore
Pulleys - Timing - 12.700mm Pitch - H - 25.4mm Wide - Through Bore

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit H Series 12.700mm Pitch. Unfinished Bore.

Cast Iron and Steel. Hub requires drilling and tapping. Bore requires machining to finished size.

Related Information:


Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 10mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:


Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 16mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:


Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 25mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:


Washers - Self Aligning - Components - Stainless Steel
Washers - Self Aligning - Components - Stainless Steel

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers. Washer A (aligning) and washer B (seat) sold separately.

AISI 303 Stainless Steel. Order a base washer and an aligning washer to make a complete unit. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.


Strip - Spring Steel
Strip - Spring Steel

Also see combined categories:
All Metal Strip

Hundreds of uses.

Hardened and tempered spring steel strip. Note that the width of this strip may vary minus nothing to plus 25 percent as it is guillotine cut from sheet. If you require a closer tolerance on the strip width please contact us prior to ordering.


Nuts - Hexagonal - Nylon Insert - Aluminium
Nuts - Hexagonal - Nylon Insert - Aluminium

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Related Information:


Nuts - Hexagonal - Nylon Insert - Brass
Nuts - Hexagonal - Nylon Insert - Brass

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Attachments - Threaded Plugs
Attachments - Threaded Plugs


Use with synchromesh or standard miniature cable

F and L dimensions are obtained after swaging. Before swaging the fitting is round.

Related Information:


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 126767 products in 2550 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 126767 products in 2550 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.