categories model car bearing


Category Matches

Shafting General Purpose

TopHide Pictures

Shafting - Unground - Silver Steel
Shafting - Unground - Silver Steel

Search Rating: 58%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

Unhardened silversteel shafting for general purposes. Not suitable for precision bearings until machined to correct tolerances and hardened.

See also drill rod. Drill Rod.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Shafting - Unground - Silver Steel.

Fishing Reel Parts

TopHide Pictures

5230 1970 Models Abu Garcia Parts
5230 1970 Models Abu Garcia Parts

Search Rating: 51%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: 5230 1970 Models Abu Garcia Parts. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature 5230 1970 Models Abu Garcia Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of 5230 1970 Models Abu Garcia Parts.

Bearings for Dental Equipment

TopHide Pictures

Bearings - Dental Applications
Bearings - Dental Applications

Search Rating: 51%

See Dental Handpiece Bearings and Orings for applications by model.

This listing is the basic features of various bearings for dental applications. Please contact us for a dental application list. See - Dental Handpiece Bearings and Orings for applications by model.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Dental Applications. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Dental Applications.

Power Tool Parts

TopHide Pictures

6 Inch Bandsaw Vertical Bench Model GMC Parts
6 Inch Bandsaw Vertical Bench Model GMC Parts

Search Rating: 50%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: 6 Inch Bandsaw Vertical Bench Model GMC Parts. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature 6 Inch Bandsaw Vertical Bench Model GMC Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of 6 Inch Bandsaw Vertical Bench Model GMC Parts.

Collectibles

TopHide Pictures

Collectibles - Metal Motorcycles
Collectibles - Metal Motorcycles

Search Rating: 48%

Beautiful model motorbikes in various styles including choppers, road bikes and vintage designs.

Made from industrial parts including bearings, screws, nuts, springs, chain links, rod, tubing and other parts. Two colours available - gunmetal grey or copper finish. Each bike is hand made, and therefore there may be minor differences between the bikes of a particular model. Re-Cycle motorbikes are a limited edition set of 20.


The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Collectibles - Metal Motorcycles. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Collectibles - Metal Motorcycles.

Pulleys Idler

TopHide Pictures

Pulleys - Timing - Idler
Pulleys - Timing - Idler

Search Rating: 45%

Also see combined categories:
All Idler Pulleys

Complete with Needle Roller Bearing.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Pulleys - Timing - Idler.

Chain and Sprockets Roller

TopHide Pictures

Sprockets - Idler
Sprockets - Idler

Search Rating: 44%

Also see combined categories:
All Sprockets for Roller Chain

Complete with Needle Roller or Ball Bearings. 3.75mm to 25.4mm pitch.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Sprockets - Idler.

Gearboxes Right Angle

TopHide Pictures

Gearboxes - Right Angle - Model RA 0550-0550-0340 - 55.0 x 55.0 x 34.0mm
Gearboxes - Right Angle - Model RA 0550-0550-0340 - 55.0 x  55.0 x 34.0mm

Search Rating: 42%

Also see combined categories:
All Right Angle Gearboxes

BLH30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gearboxes - Right Angle - Model RA 0550-0550-0340 - 55.0 x 55.0 x 34.0mm.

Gearboxes - Right Angle - Model RA 0750-0750-0440 - 75.0 x 75.0 x 44.0mm
Gearboxes - Right Angle - Model RA 0750-0750-0440 - 75.0 x  75.0 x 44.0mm

Search Rating: 42%

Also see combined categories:
All Right Angle Gearboxes

BLH40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gearboxes - Right Angle - Model RA 0750-0750-0440 - 75.0 x 75.0 x 44.0mm.

Gearboxes - Right Angle - Model RA 1000-1000-0600 -100.0 x 100.0 x 60.0mm
Gearboxes - Right Angle - Model RA 1000-1000-0600 -100.0 x 100.0 x 60.0mm

Search Rating: 42%

Also see combined categories:
All Right Angle Gearboxes

BLH50 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gearboxes - Right Angle - Model RA 1000-1000-0600 -100.0 x 100.0 x 60.0mm.

Gearboxes - Right Angle - Model RA 1250-1250-0800 -125.0 x 125.0 x 80.0mm
Gearboxes - Right Angle - Model RA 1250-1250-0800 -125.0 x 125.0 x 80.0mm

Search Rating: 42%

Also see combined categories:
All Right Angle Gearboxes

BLH60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gearboxes - Right Angle - Model RA 1250-1250-0800 -125.0 x 125.0 x 80.0mm.

Gearboxes - Right Angle - Model RA 1400-1400-0980 -140.0 x 140.0 x 98.0mm
Gearboxes - Right Angle - Model RA 1400-1400-0980 -140.0 x 140.0 x 98.0mm

Search Rating: 42%

Also see combined categories:
All Right Angle Gearboxes

BLH70 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.


The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gearboxes - Right Angle - Model RA 1400-1400-0980 -140.0 x 140.0 x 98.0mm.

Handpiece Parts

TopHide Pictures

Dental Handpiece Parts - Other
Dental Handpiece Parts - Other

Search Rating: 42%

A list of additional parts available for handpieces. Also see category Dental Handpiece Parts.

This category contains miscellaneous dental parts excluding tools, bearings and o-rings. Parts for specific handpiece models can be found under the brand name on the internet store main index.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Dental Handpiece Parts - Other.

Gearboxes Right Angle

TopHide Pictures

Gearboxes - Right Angle - Model RA 0400-0400-0250 - 40.0 x 40.0 x 25.0mm
Gearboxes - Right Angle - Model RA 0400-0400-0250 - 40.0 x  40.0 x 25.0mm

Search Rating: 42%

Also see combined categories:
All Right Angle Gearboxes

BLH20 Series. Miniature gearbox.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gearboxes - Right Angle - Model RA 0400-0400-0250 - 40.0 x 40.0 x 25.0mm.

Bearings Mounted

TopHide Pictures

Bearings - SDP - PTFE Filled Acetal - Flange Mounted
Bearings - SDP - PTFE Filled Acetal - Flange Mounted

Search Rating: 35%

Also see combined categories:
All Press In Bearings

Retainer : Carbon Steel Black Oxide Finish. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Self lubricating. Use any shaft material with 0.4 um or finer finish. Soft or hard shafting is OK.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - SDP - PTFE Filled Acetal - Flange Mounted. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - SDP - PTFE Filled Acetal - Flange Mounted.

Model Car Kits

TopHide Pictures

Model Kits - Cars - 1-20th Scale
Model Kits - Cars - 1-20th Scale

Search Rating: 35%

Also see combined categories:
All Model Kits
All Model Car Kits

Plastic model kits to build, paint and display. NOT Remote Control.

Brands include Tamiya, Italeri, Academy, Hasegawa.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Model Kits - Cars - 1-20th Scale.

Carburettor Parts

TopHide Pictures

TT600 Yamaha Parts
TT600 Yamaha Parts

Search Rating: 35%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: TT600 Yamaha Parts. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature TT600 Yamaha Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of TT600 Yamaha Parts.

Dental Handpiece Parts

TopHide Pictures

Airotor Silent Cartridge Borden Parts
Airotor Silent Cartridge Borden Parts

Search Rating: 35%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Airotor Silent Cartridge Borden Parts. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Airotor Silent Cartridge Borden Parts. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Airotor Silent Cartridge Borden Parts.

Drylin Bearings and Systems

TopHide Pictures

Drylin Linear Assembly Parts - Carriage Only
Drylin Linear Assembly Parts - Carriage Only

Search Rating: 35%

Also see combined categories:
All Drylin Assembly Parts

Linear sliding motion. Plain and Locking Types. These carriages require a matching guide rail or matching rack and pinion. Match by size.

Drylin(R) T linear guides are maintenance free and run without additional lubrication. Consequently, they are also suitable for use in damp or dirty environments. Available with a manually operated clamp to achieve a force fit at any desired point along the travel path. The wing screw is used to clamp the slide in place of the guide. Matching components listed in separate category.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Drylin Linear Assembly Parts - Carriage Only.

Tools Threading

TopHide Pictures

Tools - Installation - For Self Tapping Inserts

Search Rating: 35%

Also see combined categories:
All Tools

Installation tools for self tapping thread inserts - see the linked inserts categories

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Tools - Installation - For Self Tapping Inserts.

Drylin Bearings and Systems

TopHide Pictures

Drylin - Linear - Slides and Carriages - Size 17
Drylin - Linear - Slides and Carriages - Size 17

Search Rating: 34%

Also see combined categories:
All Drylin Slides and Carriages

Linear sliding motion.

Guide Rail Weight: 150 g/m. Carriage Weight: 1.7g. Max Rail Length: 1960 mm. Standard Bore Scheme: Symmetrical C5 = C6. Particularly insensitive to dust, dirt and water.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Drylin - Linear - Slides and Carriages - Size 17.

Drylin - Linear - Slides and Carriages - Size 27
Drylin - Linear - Slides and Carriages - Size 27

Search Rating: 34%

Also see combined categories:
All Drylin Slides and Carriages

Linear sliding motion.

Guide Rail Weight: 290 g/m. Carriage Weight: 10.8 or 12.5g. Max Rail Length: 2000 mm. Standard Bore Scheme: Symmetrical C5 = C6. Particularly insensitive to dust, dirt and water.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Drylin - Linear - Slides and Carriages - Size 27.

Drylin - Linear - Slides and Carriages - Size 80
Drylin - Linear - Slides and Carriages - Size 80

Search Rating: 34%

Also see combined categories:
All Drylin Slides and Carriages

Linear sliding motion.

Guide Rail Weight: 1140 g/m. Carriage Weight: 100g. Max Rail Length: 2000 mm. Standard Bore Scheme: Symmetrical C5 = C6. Particularly insensitive to dust, dirt and water.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Drylin - Linear - Slides and Carriages - Size 80.

Gears Metric Stem

TopHide Pictures

Gears - Spur - Module 0.8 - Stem - Steel
Gears - Spur - Module 0.8 - Stem - Steel

Search Rating: 34%

Also see combined categories:
All Metric Spur Gears
All Metric Stem Gears

Gears with integral shafts. Carbon steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Spur - Module 0.8 - Stem - Steel.

Gears - Spur - Module 1.5 - Stem - Steel
Gears - Spur - Module 1.5 - Stem - Steel

Search Rating: 34%

Also see combined categories:
All Metric Spur Gears
All Metric Stem Gears

Gears with integral shafts. Carbon steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Spur - Module 1.5 - Stem - Steel.

Gears - Spur - Module 1 - Stem - Steel
Gears - Spur - Module 1 - Stem - Steel

Search Rating: 34%

Also see combined categories:
All Metric Spur Gears
All Metric Stem Gears

Gears with integral shafts. Carbon steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Spur - Module 1 - Stem - Steel.

Gears - Spur - Module 2.5 - Stem - Steel
Gears - Spur - Module 2.5 - Stem - Steel

Search Rating: 34%

Also see combined categories:
All Metric Spur Gears
All Metric Stem Gears

Gears with integral shafts. Carbon steel

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Spur - Module 2.5 - Stem - Steel.

Gears - Spur - Module 2 - Stem - Steel
Gears - Spur - Module 2 - Stem - Steel

Search Rating: 34%

Also see combined categories:
All Metric Spur Gears
All Metric Stem Gears

Gears with integral shafts. Carbon steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Spur - Module 2 - Stem - Steel.

Chain and Sprockets Roller

TopHide Pictures

Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock
Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock

Search Rating: 34%

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.75mm simplex chain (08B BS)

Taperlock Bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 08B - 1/2 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock.

Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 34%

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.75mm simplex chain (08B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore.

Sprockets - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore
Sprockets -  9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 34%

Also see combined categories:
All Sprockets for Roller Chain

Match with 9.53x5.7mm steel chain (06B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Sprockets - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore.

Hobby Accessories

TopHide Pictures

Accessories - Hobby - Car and Buggy
Accessories - Hobby - Car and Buggy

Search Rating: 34%

Generic Parts. Specific model parts may also be found by typing the model number into the search box. Fail safes, aerials, heat sinks, body clips, tune pipe, clutch bell, bump start, engine break stand, engine fans, antenna tubes and tire warmers.

Includes Kyosho pull starts.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Accessories - Hobby - Car and Buggy.

Gears Metric Racks

TopHide Pictures

Gear Racks - Module 0.5 - Steel
Gear Racks - Module 0.5 - Steel

Search Rating: 34%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Carbon steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gear Racks - Module 0.5 - Steel.

Gear Racks - Module 0.8 - Steel
Gear Racks - Module 0.8 - Steel

Search Rating: 34%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Carbon steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gear Racks - Module 0.8 - Steel.

Gear Racks - Module 1.5 - Steel
Gear Racks - Module 1.5 - Steel

Search Rating: 34%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Carbon Steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gear Racks - Module 1.5 - Steel.

Gear Racks - Module 1 - Steel
Gear Racks - Module 1 - Steel

Search Rating: 34%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Carbon Steel

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gear Racks - Module 1 - Steel.

Gear Racks - Module 2.5 - Steel
Gear Racks - Module 2.5 - Steel

Search Rating: 34%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Carbon steel

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gear Racks - Module 2.5 - Steel.

Gear Racks - Module 2 - Steel
Gear Racks - Module 2 - Steel

Search Rating: 34%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Carbon steel

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gear Racks - Module 2 - Steel.

Gear Racks - Module 3 - Steel
Gear Racks - Module 3 - Steel

Search Rating: 34%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Carbon steel

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gear Racks - Module 3 - Steel.

Chain and Sprockets Roller

TopHide Pictures

Sprocket Plates - 6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates -  6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 34%

Also see combined categories:
All Sprockets for Roller Chain

25-1 ASA 1/4 Inch

Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Sprocket Plates - 6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore.

Sprocket Plates - 9.53 x 4.8mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates -  9.53 x 4.8mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 34%

Also see combined categories:
All Sprockets for Roller Chain

Match with 9.53x4.8mm steel chain (35ASA)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Sprocket Plates - 9.53 x 4.8mm - Simplex - Carbon Steel - Plain Bore.

Sprockets - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 34%

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.85mm simplex chain (40-1 ASA)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. American Standard 40-1 - 1/2 inch. With and without hubs. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Sprockets - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore.

Sprockets - 15.88 x 9.4mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 15.88 x 9.4mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 34%

Also see combined categories:
All Sprockets for Roller Chain

Match with 15.90x9.4mm steel chain (50-1 ASA)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. American Standard 50-1 - 5/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Sprockets - 15.88 x 9.4mm - Simplex - Carbon Steel - Plain Bore.

Bearings Press In

TopHide Pictures

Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP
Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP

Search Rating: 34%

Also see combined categories:
All Press In Bearings

Porous sintered bronze bearing. -28 to 95 oC. Retainer : Carbon Steel / Zinc Plated or Oxycote(R) Hardened to HRB 93.98. Use any shaft material with 0.8 um or finer finish.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP.

Chain and Sprockets Roller

TopHide Pictures

Sprocket Plates - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 33%

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.75mm simplex chain (08B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Sprocket Plates - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore.

Sprocket Plates - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates -  9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 33%

Also see combined categories:
All Sprockets for Roller Chain

Match with 9.53x5.7mm steel chain (06B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Sprocket Plates - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore.

Pressure Rollers

TopHide Pictures

Bearings - Pressure Roller - With Urethane OD
Bearings - Pressure Roller - With Urethane OD

Search Rating: 33%

Also see combined categories:
All Tyred OD Bearings
All Rollers

Bearings with Urethane Tyre on OD for applications requiring frictional movement.

For applications including paper and card dispensing and rolling (eg ATM Machines).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Pressure Roller - With Urethane OD. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Pressure Roller - With Urethane OD.

Chain and Sprockets Roller

TopHide Pictures

Sprockets - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 33%

Also see combined categories:
All Sprockets for Roller Chain

Match with 15.90x9.65mm duplex steel chain (10B-2 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 10B - 5/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Sprockets - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore.

Sprockets - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 33%

Also see combined categories:
All Sprockets for Roller Chain

Match with 19.05x11.68mm simplex steel chain (12B-1 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 12B - 3/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Sprockets - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore.

Sprockets - 6.35 x 2.8mm - Simplex - Carbon Steel - Finished Bore
Sprockets -  6.35 x 2.8mm - Simplex - Carbon Steel - Finished Bore

Search Rating: 33%

Also see combined categories:
All Sprockets for Roller Chain

25-1 ASA 1/4 Inch. With finished bore.

Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Sprockets - 6.35 x 2.8mm - Simplex - Carbon Steel - Finished Bore.

Sprockets - 6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore
Sprockets -  6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 33%

Also see combined categories:
All Sprockets for Roller Chain

25-1 ASA 1/4 Inch. With unfinished bore.

Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Sprockets - 6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore.

Bearings Thrust

TopHide Pictures

Bearings - Thrust - Ball - Washers Only - Chrome Steel
Bearings - Thrust - Ball - Washers Only - Chrome Steel

Search Rating: 33%

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Carbon Steel Washers are hardened to RC59.61.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Thrust - Ball - Washers Only - Chrome Steel. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Thrust - Ball - Washers Only - Chrome Steel.

Chain and Sprockets Roller

TopHide Pictures

Sprocket Plates - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 33%

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.85mm simplex chain (40-1 ASA)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Sprocket Plates - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore.

Bearings Mounted

TopHide Pictures

Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning
Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning

Search Rating: 33%

Also see combined categories:
All Press In Bearings

Fitted with drawn cup needle bearing. -30 to 110 oC. Retainer : Carbon Stee black oxide finish. Shafts must be hardened to Rc 58 with 0.8um surface finish or finer. Non aligning.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning.

Drylin Bearings and Systems

TopHide Pictures

Drylin Linear Assembly Parts - Guide Rails Only
Drylin Linear Assembly Parts - Guide Rails Only

Search Rating: 33%

Also see combined categories:
All Drylin Assembly Parts

These rails require a matching carriage as listed in a separate category. Match by size.

Slide Rail: Extruded Aluminium Construction Material: Al Mg Si 0.5. Coating: Hard anodised, 50um Hardness: 500HV. Matching components listed in separate category.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Drylin Linear Assembly Parts - Guide Rails Only.

Chain and Sprockets Roller

TopHide Pictures

Sprocket Plates - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 33%

Also see combined categories:
All Sprockets for Roller Chain

Match with 15.90x9.65mm duplex steel chain (10B-2 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 10B - 5/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Sprocket Plates - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore.

Sprocket Plates - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 33%

Also see combined categories:
All Sprockets for Roller Chain

Match with 19.05x11.68mm simplex steel chain (12B-1 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 12B - 3/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Sprocket Plates - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore.

Linear Slides

TopHide Pictures

Linear Slides - Utilitrak - CR - Carriage
Linear Slides - Utilitrak - CR - Carriage

Search Rating: 32%

Use with Utilitrak CR Channel. Stainless steel wheels with sealed bearings. Match by size.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Linear Slides - Utilitrak - CR - Carriage. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Linear Slides - Utilitrak - CR - Carriage.

Linear Guide System - Two Piece
Linear Guide System - Two Piece

Search Rating: 32%

Using Frelon Gold plain bearing technology. Rail and carriage are made from 6063-T6 aluminium and come as a set.

Rails are ceramic coated to resist corrosion and repel weld spatter and contaminants. Smooth running. Dampens vibration. Guide has slots for T nuts or bolts. Two component system allows for easier installation than traditional rail systems.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Linear Guide System - Two Piece. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Linear Guide System - Two Piece.

Gears Metric Mitre

TopHide Pictures

Gears - Mitre - Module 0.6 - Steel
Gears - Mitre - Module 0.6 - Steel

Search Rating: 32%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Mitre - Module 0.6 - Steel.

Gears - Mitre - Module 1.5 - Steel
Gears - Mitre - Module 1.5 - Steel

Search Rating: 32%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Mitre - Module 1.5 - Steel.

Gears - Mitre - Module 2.5 - Steel
Gears - Mitre - Module 2.5 - Steel

Search Rating: 32%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Mitre - Module 2.5 - Steel.

Gears - Mitre - Module 2.75 - Steel
Gears - Mitre - Module 2.75 - Steel

Search Rating: 32%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Mitre - Module 2.75 - Steel.

Gears - Mitre - Module 2 - Steel
Gears - Mitre - Module 2 - Steel

Search Rating: 32%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle. Carbon steel.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Mitre - Module 2 - Steel.

Gears - Mitre - Module 3 - Steel
Gears - Mitre - Module 3 - Steel

Search Rating: 32%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Mitre - Module 3 - Steel.

Washers Lock

TopHide Pictures

Washers - Lock - Tabbed - Heavy Duty
Washers - Lock - Tabbed - Heavy Duty

Search Rating: 32%

Also see combined categories:
All Tabbed Lock Washers
All Lock Washers

Heavy duty WH / TW Series for bearing locknuts.

Carbon spring steel. Use with NH series locknuts.


The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Washers - Lock - Tabbed - Heavy Duty.

Shafting Precision Ground

TopHide Pictures

Shafting - Pre Drilled and Tapped - High Carbon Steel
Shafting - Pre Drilled and Tapped - High Carbon Steel

Search Rating: 32%

Also see combined categories:
All Shafting
All Steel Shafting

For use with rail supports and open linear bearings

Straightness: 0.1 mm / mtr.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Shafting - Pre Drilled and Tapped - High Carbon Steel. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Shafting - Pre Drilled and Tapped - High Carbon Steel.

Shafting - Ground - Precision - High Carbon Steel
Shafting - Ground - Precision - High Carbon Steel

Search Rating: 32%

Also see combined categories:
All Shafting
All Steel Shafting

Precision ground shafting. AISI C1060. Hardened and recommended for use with precision bearings.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Shafting - Ground - Precision - High Carbon Steel. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Shafting - Ground - Precision - High Carbon Steel.

Gear Racks Flexible

TopHide Pictures

Gear Racks - Flexible - Clamps
Gear Racks - Flexible - Clamps

Search Rating: 31%

Also see combined categories:
All Flexible Gear Racks

For clamping acetal flexirack.

For easy ready selected sets of rack and gear please see the HES website.


The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gear Racks - Flexible - Clamps.

Gears Inch Mitre

TopHide Pictures

Gears - Mitre - 10 Diametrical Pitch - Steel
Gears - Mitre - 10 Diametrical Pitch - Steel

Search Rating: 31%

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Mitre - 10 Diametrical Pitch - Steel.

Gears - Mitre - 12 Diametrical Pitch - Steel
Gears - Mitre - 12 Diametrical Pitch - Steel

Search Rating: 31%

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Mitre - 12 Diametrical Pitch - Steel.

Gears - Mitre - 24 Diametrical Pitch - Steel
Gears - Mitre - 24 Diametrical Pitch - Steel

Search Rating: 31%

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Mitre - 24 Diametrical Pitch - Steel.

Gears - Mitre - 32 Diametrical Pitch - Steel
Gears - Mitre - 32 Diametrical Pitch - Steel

Search Rating: 31%

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Mitre - 32 Diametrical Pitch - Steel.

Gears - Mitre - 48 Diametrical Pitch - Steel
Gears - Mitre - 48 Diametrical Pitch - Steel

Search Rating: 31%

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Mitre - 48 Diametrical Pitch - Steel.

Gears - Mitre - 8 Diametrical Pitch - Steel
Gears - Mitre -  8 Diametrical Pitch - Steel

Search Rating: 31%

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Mitre - 8 Diametrical Pitch - Steel.

Gears Inch Racks

TopHide Pictures

Gear Racks - 24DP - 14.5 PA - Steel
Gear Racks -  24DP - 14.5 PA - Steel

Search Rating: 31%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Carbon Steel. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gear Racks - 24DP - 14.5 PA - Steel.

Gear Racks - 32DP - 14.5 PA - Steel
Gear Racks -  32DP - 14.5 PA - Steel

Search Rating: 31%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. Carbon Steel. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gear Racks - 32DP - 14.5 PA - Steel.

Gears Metric Spur

TopHide Pictures

Gears - Spur - Module 0.4 - Steel
Gears - Spur - Module 0.4 - Steel

Search Rating: 31%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. Carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Spur - Module 0.4 - Steel.

Gears - Spur - Module 0.5 - Steel
Gears - Spur - Module 0.5 - Steel

Search Rating: 31%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. Carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Spur - Module 0.5 - Steel.

Gears - Spur - Module 0.8 - Steel
Gears - Spur - Module 0.8 - Steel

Search Rating: 31%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. Carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Spur - Module 0.8 - Steel.

Gears - Spur - Module 1 - Steel
Gears - Spur - Module 1 - Steel

Search Rating: 31%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. Carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Spur - Module 1 - Steel.

Gears - Spur - Module 2.5 - Steel
Gears - Spur - Module 2.5 - Steel

Search Rating: 31%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 2.500mm. 20o Pressure Angle. Carbon steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Spur - Module 2.5 - Steel.

Gears - Spur - Module 3 - Steel
Gears - Spur - Module 3 - Steel

Search Rating: 31%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 3.000mm. 20o Pressure Angle. Carbon steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Spur - Module 3 - Steel.

Spur Gears Circular Pitch

TopHide Pictures

Gears - Spur - Circular Pitch 2 - Steel
Gears - Spur - Circular Pitch 2 - Steel

Search Rating: 31%

PCD = No. of Teeth x 0.636mm (2.000 / Pi.). Various styles. Carbon steel.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Spur - Circular Pitch 2 - Steel.

Gears - Spur - Circular Pitch 5 - Steel
Gears - Spur - Circular Pitch 5 - Steel

Search Rating: 31%

PCD = No. of Teeth x 1.591mm (5.000 / Pi.). Various styles. Carbon steel.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Gears - Spur - Circular Pitch 5 - Steel.

Bearings Acetal

TopHide Pictures

Bearings - Acetal - Disk Cleaning Applications
Bearings - Acetal - Disk Cleaning Applications

Search Rating: 31%

Also see combined categories:
All Plastic Single Row Bearings

Special acetal bearings for disk cleaning


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Acetal - Disk Cleaning Applications. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Acetal - Disk Cleaning Applications.

Bearings - Acetal - Double Row - with 316 Stainless Steel Balls
Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Search Rating: 31%

Also see combined categories:
All Plastic Ball Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Acetal - Double Row - with 316 Stainless Steel Balls. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Acetal - Double Row - with 316 Stainless Steel Balls.

Bearings - Acetal - Double Row - with Glass Balls
Bearings - Acetal - Double Row - with Glass Balls

Search Rating: 31%

Also see combined categories:
All Plastic Ball Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Acetal - Double Row - with Glass Balls. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Acetal - Double Row - with Glass Balls.

Bearings - Acetal - MRI Table
Bearings - Acetal - MRI Table

Search Rating: 31%

Also see combined categories:
All Plastic Single Row Bearings

Special acetal bearings for MRI table wheels


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Acetal - MRI Table. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Acetal - MRI Table.

Bearings - Acetal - Single Row - with 302 Stainless Steel Balls
Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Search Rating: 31%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Acetal - Single Row - with 302 Stainless Steel Balls. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Acetal - Single Row - with 302 Stainless Steel Balls.

Bearings - Acetal - Single Row - with 316 Stainless Steel Balls
Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Search Rating: 31%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Acetal - Single Row - with 316 Stainless Steel Balls. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Acetal - Single Row - with 316 Stainless Steel Balls.

Bearings - Acetal - Single Row - with Glass Balls
Bearings - Acetal - Single Row - with Glass Balls

Search Rating: 31%

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Acetal - Single Row - with Glass Balls. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Acetal - Single Row - with Glass Balls.

Bearings - Acetal - Special Purpose
Bearings - Acetal - Special Purpose

Search Rating: 31%

Also see combined categories:
All Plastic Single Row Bearings

Special acetal bearings for Bicycle Chain Derailer and special effects lighting systems


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Acetal - Special Purpose. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Acetal - Special Purpose.

Bearings - Acetal - Special Types
Bearings - Acetal - Special Types

Search Rating: 31%

Also see combined categories:
All Plastic Ball Bearings

Light duty acetal bearings used for drawer runners, light duty tracks, garage doors and more.

See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Acetal - Special Types. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Acetal - Special Types.

Bearings for Pool Equipment
Bearings for Pool Equipment

Search Rating: 31%

Acetal bearings for spa jets and pool vacuum wheels

Water Lubrication.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings for Pool Equipment. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings for Pool Equipment.

Bearings 316 Stainless

TopHide Pictures

Bearings - Ball - 316 Stainless Steel - Double Row - Open
Bearings - Ball - 316 Stainless Steel - Double Row - Open

Search Rating: 31%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - 316 Stainless Steel - Double Row - Open. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Ball - 316 Stainless Steel - Double Row - Open.

Bearings - Ball - 316 Stainless Steel - Single Row - Open
Bearings - Ball - 316 Stainless Steel - Single Row - Open

Search Rating: 31%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - 316 Stainless Steel - Single Row - Open. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Ball - 316 Stainless Steel - Single Row - Open.

Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed

Search Rating: 31%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - 316 Stainless Steel - Single Row - Sealed. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Ball - 316 Stainless Steel - Single Row - Sealed.

Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded

Search Rating: 31%

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Ball - 316 Stainless Steel - Single Row - Shielded. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Ball - 316 Stainless Steel - Single Row - Shielded.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 124193 products in 3084 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.