Catches
Fast economical installation.
Fits frames from 1.1 to 7.1mm thick. Installation hole size 15mm x 39.9mm. Push to close and pull to open. Spring loaded over centre action. Corrosion resistant black ABS with 303 stainless steel spring.
Mounts inside your enclosure. Installs either right or left side by inverting. Use 4 gauge screws or 1/8in (3.125mm) rivets to install.
Various styles - refer pictures
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
Includes MIL-R-21248/MS 90707 - Styles M1440 / Ellison GR / Seeger G and GA. Retaining rings. Snap Rings (USA).
Reusable tapered section rings for grooveless shafts like plastics, tubes or castings. Can be used where adjustable ring placement is desired - like progressively tightening a compression spring. This category may be available in the new MBA online store at
Circlips - External - Grooveless.
Related Information:
Draw pull catches are available in either steel or 304 stainless. Strike is included.
Polyacetal catch and strike with polyethylene rollers. Ideal in corrosive environments.
304 Stainless Steel and Polyurethane
Strong and light polyacetal and polyamide. Holds cabinets secure with 7kg of pull force.
Three internal compression springs supply up to 30kg of spring tension. Available as padlockable or with secondary catch.
Spring tension compensates for gasket set. Provides exact tension for water tight and air tight seals. This category may be available in the new MBA online store at
Catches - Compression Spring.
Ultra thin strong magnetic catch is perfect for tight areas. Has a full 4kg of magnetic force.
Related Information:
Ultra thin strong magnetic catch is perfect for tight areas. Has 2.5 kg of magnetic force.
Related Information:
Patented quick clamp is ideal for door openings on bins, hoppers, tanks and manholes. T-Handle allows torque without tools. The one piece unit is made from highly polished 304 stainless steel.
Full 50.8mm adjustment. 180
o pivot when disengaged leaving access doorway unobstructed. Will not loosen through vibration. Brackets supplied for easy installation. This category may be available in the new MBA online store at
Clamps - Lorenz.
Vibration dampening
Related Information:
Related Information:
Economical pins that can be used in military or conventional equipment.
Solid body construction with direct spring loaded ball. Used for locking telescoping tubes, securing bracket assemblies, anchoring clevis fittings, hinge pins, cotter pin replacement or setting up jigs and fixtures. Positive lock detent pins. Commercial drill tolerances provide clearance for standard pins. Zinc plated C1144 steel. Not for critical applications. If known pullout strength is required use commercial or industrial pins. This category may be available in the new MBA online store at
Pins - Ball Lock - Keyring Style - Steel.
Related Information:
Malleable iron with a tumbled finish.
Malleable iron with a tumbled finish.
Industrial cupmounts provide excellent protection against severe impact shock, vibration and noise.
High vibration dampening. Fail safe, rugged interlocking metal and neoprene construction. Metal cupmount is cold rolled steel. Low profile compact design. Metal top plate is domed shape to guard against oil contamination. High grade neoprene elastomer provides resistance to ozone and oils. This category may be available in the new MBA online store at
Mounts - Vibration - Isolation - Cup Style 2.
Related Information:
Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.
Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 303 Stainless Steel.
Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.
Related Information:
Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.
Related Information:
Economy stamped style combines high strength with low cost. Also known as Heim Joints
Made from low carbon steel and plated for corrosion resistance. Ball is case hardened. This category may be available in the new MBA online store at
Rod Ends - Steel - Stamped - Female.
Used to insert keylocking inserts - keensert style. Keylocking inserts can be wound in without these tools but the tools make the job much easier. Also known as keenserts.
Related Information:
Plated alloy steel
Nickel Plated
Malleable iron
Zinc Plated
Nickel Plated
Galvanised drop forged steel with stainless steel spring
Rust proof nickel plated made from solid bronze
Rust proof nickel plated made from solid bronze
Rust proof nickel plated made from finest quality zinc aluminium alloy
Rust proof nickel plated made from finest quality zinc aluminium alloy
M2300 / SB / ESB Snaprings. Like an internal circlip without the lugs.
Applications include gear systems, securing needle bearings and to act as spacers. Used on the inside bore diameter of a housing or similar. This category may be available in the new MBA online store at
Snap Rings - Internal - Basic.
Rust proof nickel plated made from finest quality zinc aluminium alloy
Rust proof nickel plated made from finest quality zinc aluminium alloy
Rust proof nickel plated made from finest quality zinc aluminium alloy
Includes series M3200 / SP / ESP / M2400 / SW snaprings. Similar to a circlip without the lugs.
Carbon sping steel. Used on the outside diameter of a bearing, shaft or similar equipment. This category may be available in the new MBA online store at
Snap Rings - External - Basic.
Includes series M3200 / SP / ESP / M2400 / SW snaprings. Similar to a circlip without the lugs.
301 S11/S22 Stainless Steel. Used on the outside diameter of a bearing, shaft or similar equipment. This category may be available in the new MBA online store at
Snap Rings - External - Stainless Steel.
0.06 to 44 Nm. Max Speed: 3000 RPM.
Single hubs. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.
Related Information:
Chrome Steel Bearings with a Snap Ring on the OD
Related Information:
Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.
Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating. This category may be available in the new MBA online store at
Snap Buttons - Double End.
Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.
Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating. This category may be available in the new MBA online store at
Snap Buttons - Flat Type.
Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.
Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated. This category may be available in the new MBA online store at
Pins - Clik - Carbon Steel.
Related Information:
Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.
Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated. This category may be available in the new MBA online store at
Pins - Clik - Mild Steel.
Related Information:
Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.
Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating. This category may be available in the new MBA online store at
Snap Buttons - Single End - Dog Leg.
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 138615
products in 2015 categories including
couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the
Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or
cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other
product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully
traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.