Small Parts & Bearings - an MBA company

Bushings Qd And Taperlock


Bushings - QD and Taperlock


Bushings - QD
Bushings - QD

Used with QD type cast iron vee pulleys, timing pulleys, sprockets, poly vee pulleys and other parts designed specifically for use with a QD bushing

Similar to a taperlock bush, but not interchangeable. QD bushings like taperlock bushings allow for use of a single stock pulley for many applications with different shaft sizes. Select the correct QD series to suit the pulley.



You may also like

Pulleys Vee


Pulleys - Vee - A - 4L - Single Row - For QD Bushing
Pulleys - Vee - A - 4L - Single Row - For QD Bushing

Also see combined categories:
All Vee Pulleys A Section 12.5 and 12.7mm Top Width

Cast iron pulleys. QD bushings are used to vary the bore sizes.

Related Information:
A /4L Section Vee Belts
Type H QD Bushings

Pulleys - Vee - B - 5L - Single Row - For QD Bushing
Pulleys - Vee - B - 5L - Single Row - For QD Bushing

Also see combined categories:
All Vee Pulleys B Section 15.9 and 16.5mm Top Width

Cast iron pulleys. QD bushings are used to vary the bore sizes.

Related Information:
B / 5L Section Vee Belts
Type H QD Bushings

Pulleys Timing H Pitch 12.7mm


Pulleys - Timing - 12.700mm Pitch - H - 25.4mm Wide - Taperlock
Pulleys - Timing - 12.700mm Pitch - H - 25.4mm Wide - Taperlock

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Taperlock bush required for bore.

Cast Iron and Steel. Match with a taperlock to suit your bore requirements.

Related Information:
Belts to suit 12.700 Pitch H Pulleys
Taperlock Bushings

Pulleys Timing L Pitch 9.53mm


Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Taperlock
Pulleys - Timing -  9.525mm Pitch - L -  12.7mm Wide - Taperlock

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.

Black oxide coated steel or cast iron. Match with a taperlock to suit your bore requirements.

Related Information:
Belts to suit 9.525 Pitch L Pulleys - 12mm wide
Taperlock Bushings

Pulleys - Timing - 9.525mm Pitch - L - 19.1mm Wide - Taperlock
Pulleys - Timing -  9.525mm Pitch - L -  19.1mm Wide - Taperlock

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.

Match with a taperlock to suit your bore requirements.

Related Information:
Belts to suit 9.525 Pitch L Pulleys - 19mm wide
Taperlock Bushings

Pulleys - Timing - 9.525mm Pitch - L - 25.4mm Wide - Taperlock
Pulleys - Timing -  9.525mm Pitch - L -  25.4mm Wide - Taperlock

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.

Match with a taperlock to suit your bore requirements.

Related Information:
Belts to suit 9.525 Pitch L Pulleys - 25mm wide
Taperlock Bushings

Pulleys Timing H Pitch 12.7mm


Pulleys - Timing - 12.700mm Pitch - H - 38.1mm Wide - Taperlock
Pulleys - Timing - 12.700mm Pitch - H - 38.1mm Wide - Taperlock

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Belt width 38.1mm. Taperlock bush required for bore.

Steel and Cast Iron. Match with a taperlock to suit your bore requirements.

Related Information:
Belts to suit 12.700 Pitch H Pulleys
Taperlock Bushings

Pulleys - Timing - 12.700mm Pitch - H - 50.8mm Wide - Taperlock
Pulleys - Timing - 12.700mm Pitch - H - 50.8mm Wide - Taperlock

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Belt width 50.8mm. Taperlock bush required for bore.

Steel and Cast Iron. Match with a taperlock to suit your bore requirements.

Related Information:
Belts to suit 12.700 Pitch H Pulleys
Taperlock Bushings

Pulleys - Timing - 12.700mm Pitch - H - 76.2mm Wide - Taperlock
Pulleys - Timing - 12.700mm Pitch - H - 76.2mm Wide - Taperlock

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Belt width 76.2mm. Taperlock bush required for bore.

Steel and Cast Iron. Match with a taperlock to suit your bore requirements.

Related Information:
Belts to suit 12.700 Pitch H Pulleys
Taperlock Bushings

Pulleys Timing GT2 5mm


Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Taperlock
Pulleys - Timing -  5.000mm Pitch - GT2 - 15mm Wide - Taperlock

Also see combined categories:
All 5mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide.

Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size.

Related Information:
Belts to suit 5.000 Pitch GT Pulleys - 16mm wide
Taperlock Bushings

Pulleys - Timing - 5.000mm Pitch - GT2 - 25mm Wide - Taperlock
Pulleys - Timing -  5.000mm Pitch - GT2 - 25mm Wide - Taperlock

Also see combined categories:
All 5mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 25mm wide.

Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size.

Related Information:
Belts to suit 5.000 Pitch GT Pulleys - 16mm wide
Taperlock Bushings

Bushes Plastic


Bushings - Snap - Closed
Bushings - Snap - Closed

Quality UL approved 6/6 nylon with flammabilty rating of 94V-2. Open snap bushings are designed to provide protection from sharp edges where cable or hose runs through plate steel.

Similar to a bung, but designed with expanding catch for use in holes in sheet products. Also see grommets for a similar product made from rubber.

Related Information:
Also see Grommets

Bushings - Snap - Open
Bushings - Snap - Open

Quality UL approved 6/6 nylon with flammabilty rating of 94V-2. Closed snap bushings are designed to keep out dust and other contaminants and protect from sharp edges where cable or hose used to run through a hole in plate steel.

Also called a dome plug. Also see grommets for a similar product made from rubber.

Related Information:
Also see Grommets

Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts & Bearings offers 126280 products in 2935 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts & Bearings offers 126280 products in 2935 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.