Small Parts & Bearings - an MBA company

Belts Timing Xl Pitch 5.08mm Categories


Belts - Timing - 5.080mm Pitch - XL - 12.7mm Wide
Belts - Timing -  5.080mm Pitch - XL - 12.7mm Wide

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch. 12mm or 12.7mm width.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:


Belts - Timing - 5.080mm Pitch - XL - 6.4mm Wide
Belts - Timing -  5.080mm Pitch - XL -  6.4mm Wide

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:


Belts - Timing - 5.080mm Pitch - XL - 7.9mm Wide
Belts - Timing -  5.080mm Pitch - XL -  7.9mm Wide

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:


Belts - Timing - 5.080mm Pitch - XL - 9.5mm Wide
Belts - Timing -  5.080mm Pitch - XL -  9.5mm Wide

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:


Belts - Timing - 5.080mm Pitch - XL Double Sided - 6.4mm Wide
Belts - Timing -  5.080mm Pitch - XL Double Sided -  6.4mm Wide

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:


Belts - Timing - 5.080mm Pitch - XL Double Sided - 9.5mm Wide
Belts - Timing -  5.080mm Pitch - XL Double Sided -  9.5mm Wide

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:


You may also be interested in

Pulleys Timing XL Pitch 5.08mm


Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Aluminium
Pulleys - Timing -  5.080mm Pitch - XL - STOCK - Aluminium

Also see combined categories:
All XL 5.08mm Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Aluminium.

Related Information:


Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Carbon Steel
Pulleys - Timing -  5.080mm Pitch - XL - STOCK - Carbon Steel

Also see combined categories:
All XL 5.08mm Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Carbon Steel.

Related Information:


Pulleys - Timing - 5.080mm Pitch - XL - 6.4mm Wide - Through Bore
Pulleys - Timing -  5.080mm Pitch - XL -  6.4mm Wide - Through Bore

Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

Aluminium alloy. Finished bore with set screw locking. This category may be available in the new MBA online store at Pulleys - Timing - 5.080mm Pitch - XL - 6.4mm Wide - Through Bore.

Related Information:


Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Plastic - Insert
Pulleys - Timing -  5.080mm Pitch - XL -  9.5mm Wide - Plastic - Insert

Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Brass insert.


Related Information:


Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Through Bore
Pulleys - Timing -  5.080mm Pitch - XL -  9.5mm Wide - Through Bore

Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.

Aluminium alloy and Black Oxide coated steel. Finished bore with set screw locking. Unfinished types requires drilling and tapping. Bore requires machining to finished size. This category may be available in the new MBA online store at Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Through Bore.

Related Information:


Clamps - Timing Belt
Clamps - Timing Belt


Used for locking the ends of timing belt lengths used in reciprocating applications

Suits single and double sided belts. Black Polycarbonate with 303 stainless fasteners. Low inertia. Compact Design. Patent Pending. For MXL, XL, GT 2mm, GT 3mm, GT 5mm, HTD 3mm and HTD 5mm belt pitches.

Related Information:


Belts - Timing - 2.032mm Pitch - MXL - 12.7mm Wide
Belts - Timing -  2.032mm Pitch - MXL - 12.7mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 12.7mm (1/2 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:


Belts - Timing - 2.032mm Pitch - MXL - 3.2mm Wide
Belts - Timing -  2.032mm Pitch - MXL -  3.2mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 3.18mm (1/8 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:


Belts - Timing - 2.032mm Pitch - MXL - 4.8mm Wide
Belts - Timing -  2.032mm Pitch - MXL -  4.8mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 4.76mm (3/16 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:


Belts - Timing - 2.032mm Pitch - MXL - 6.4mm Wide
Belts - Timing -  2.032mm Pitch - MXL -  6.4mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 6.35mm (1/4 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:


Belts - Timing - 2.032mm Pitch - MXL - 7.9mm Wide
Belts - Timing -  2.032mm Pitch - MXL -  7.9mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 7.93mm (5/16 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:


Belts - Timing - 2.032mm Pitch - MXL - 9.5mm Wide
Belts - Timing -  2.032mm Pitch - MXL -  9.5mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 9.53mm (3/8 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:


Belts - Timing - 2.032mm Pitch - MXL - Clean - 3.2mm Wide
Belts - Timing -  2.032mm Pitch - MXL - Clean - 3.2mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

PowerGrip(R) TruMotion(R) Timing Belts in 2.032mm or 0.080 inch pitch.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oC to +90oC, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. TruMotion(R) belts have a durable wear surface for longer life and are RoHS compliant. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. RoHs compliant.

Related Information:


Belts - Timing - 2.032mm Pitch - MXL Double Sided - 6.4mm Wide
Belts - Timing -  2.032mm Pitch - MXL Double Sided - 6.4mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 6.35mm (1/4 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.51mm. Belt Height (W) - 1.52mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:


Belts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 3.2mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:


Belts - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 4.8mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:


Belts - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 6.4mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:


Belts - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 7.9mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:


Belts - Timing - 5.000mm Pitch - AT5 - 10mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 10mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:


Belts - Timing - 5.000mm Pitch - AT5 - 12mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 12mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:


Belts - Timing - 5.000mm Pitch - AT5 - 16mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 16mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:


Belts - Timing - 5.000mm Pitch - AT5 - 20mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 20mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:


Belts - Timing - 5.000mm Pitch - AT5 - 25mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:


Belts - Timing - 5.000mm Pitch - AT5 - 6mm Wide
Belts - Timing -  5.000mm Pitch - AT5 -  6mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:


Belts - Timing - 5.000mm Pitch - AT5 - 8mm Wide
Belts - Timing -  5.000mm Pitch - AT5 -  8mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:


Belts - Timing - 14.000mm Pitch - GT - 115mm Wide
Belts - Timing - 14.000mm Pitch - GT - 115mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:


Belts - Timing - 14.000mm Pitch - GT - 170mm Wide
Belts - Timing - 14.000mm Pitch - GT - 170mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:


Belts - Timing - 14.000mm Pitch - GT - 40mm Wide
Belts - Timing - 14.000mm Pitch - GT -  40mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:


Belts - Timing - 14.000mm Pitch - GT - 55mm Wide
Belts - Timing - 14.000mm Pitch - GT -  55mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:


Belts - Timing - 14.000mm Pitch - GT - 85mm Wide
Belts - Timing - 14.000mm Pitch - GT -  85mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:


Belts - Timing - 2.000mm Pitch - GT - 3mm Wide
Belts - Timing -  2.000mm Pitch - GT -  3mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:


Belts - Timing - 2.000mm Pitch - GT - 4mm Wide
Belts - Timing -  2.000mm Pitch - GT -  4mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:


Belts - Timing - 2.000mm Pitch - GT - 6mm Wide
Belts - Timing -  2.000mm Pitch - GT -  6mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:


Belts - Timing - 2.000mm Pitch - GT - 9mm Wide
Belts - Timing -  2.000mm Pitch - GT -  9mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:


Belts - Timing - 2.000mm Pitch - GT - Clean - 6mm Wide
Belts - Timing -  2.000mm Pitch - GT - Clean - 6mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

PowerGrip(R) TruMotion(R) Timing Belts in 2.000mm.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. GT3 will replace GT2 as stock is depleted. Pitch (P) - 2.00mm, Tooth Height (H) - 0.76mm, Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:


Belts - Timing - 3.000mm Pitch - GT - 15mm Wide
Belts - Timing -  3.000mm Pitch - GT - 15mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.

Related Information:


Belts - Timing - 3.000mm Pitch - GT - 6mm Wide
Belts - Timing -  3.000mm Pitch - GT -  6mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.

Related Information:





Main Pages

About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 138615 products in 2015 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 138615 products in 2015 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.