Delays on shipments from USA and shipments passing through Singapore
Shipments from the USA are currently experiencing delays due to severe weather conditions. Shipments passing through Singapore are experiencing some minor delays due to Covid restrictions. We will keep you updated if your orders are affected.
Belts Timing Htd 8mm Categories
Belts - Timing - 8.000mm Pitch - HTD - 20mm Wide
HTD Series Metric Timing Belts
Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 8.000mm Pitch - HTD - 30mm Wide
HTD Series Metric Timing Belts
Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 8.000mm Pitch - HTD - 50mm Wide
HTD Series Metric Timing Belts
Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 8.000mm Pitch - HTD - 85mm Wide
HTD Series Metric Timing Belts
Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.
Related Information:
You may also be interested in
Pulleys Timing HTD 8mm
Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Carbon Steel
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing GT2 8mm
Pulleys - Timing - 8.000mm Pitch - GT2 - 12mm Wide - Taperlock
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 12.0mm wide.
Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 8.000mm Pitch - GT2 - 20mm Wide - Taperlock
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 20mm wide.
Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 8.000mm Pitch - GT2 - 30mm Wide - Taperlock
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 30mm wide.
Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 8.000mm Pitch - GT2 - 50mm Wide - Taperlock
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 50mm wide.
Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 8.000mm Pitch - GT2 - 85mm Wide - Taperlock
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 85mm wide.
Black Oxide Coated Cast Iron. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 8.000mm Pitch - GT2 - 12mm Wide - Through Bore
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 12.0mm wide. Pilot bored.
Black oxide coated steel. No locking.
Related Information:
Pulleys - Timing - 8.000mm Pitch - GT2 - 50mm Wide - Through Bore
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 50mm wide.
Black oxide coated steel. No locking. Unfinished types requires drilling and tapping. Bore requires machining to finished size.
Related Information:
Belts Timing AT5 5mm
Belts - Timing - 5.000mm Pitch - AT5 - 8mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Related Information:
Belts Timing T2.5 2.5mm
Belts - Timing - 2.500mm Pitch - T2.5 - 8mm Wide
T Series Metric Timing Belts.
Pitch (P) - 2.500mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Related Information:
Belts Timing T5 5mm
Belts - Timing - 5.000mm Pitch - T5 - 8mm Wide
T Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
Related Information:
Belts Timing GT2 8mm
Belts - Timing - 8.000mm Pitch - GT2 - 12mm Wide
GT2 Series Metric Timing Belts
Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 8.000mm Pitch - GT2 - 20mm Wide
GT2 Series Metric Timing Belts
Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 8.000mm Pitch - GT2 - 30mm Wide
GT2 Series Metric Timing Belts
Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 8.000mm Pitch - GT2 - 50mm Wide
GT2 Series Metric Timing Belts
Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 8.000mm Pitch - GT2 - 85mm Wide
GT2 Series Metric Timing Belts
Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.
Related Information:
Belts Timing HTD -14mm
Belts - Timing - 14.000mm Pitch - HTD - 115mm Wide
HTD Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 14.000mm Pitch - HTD - 170mm Wide
HTD Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 14.000mm Pitch - HTD - 40mm Wide
HTD Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 14.000mm Pitch - HTD - 55mm Wide
HTD Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 14.000mm Pitch - HTD - 85mm Wide
HTD Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Related Information:
Belts Timing HTD 3mm
Belts - Timing - 3.000mm Pitch - HTD - 15mm Wide
HTD Series Metric Timing Belts.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 3.000mm Pitch - HTD - 6mm Wide
HTD Series Metric Timing Belts.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 3.000mm Pitch - HTD - 9mm Wide
HTD Series Metric Timing Belts.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 3.000mm Pitch - HTD Double Sided - 6mm Wide
HTD Series Metric Timing Belts Double Sided.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 3.000mm Pitch - HTD Double Sided - 9mm Wide
HTD Series Metric Timing Belts.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.
Related Information:
Belts Timing HTD 5mm
Belts - Timing - 5.000mm Pitch - HTD - 15mm Wide
HTD Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 5.000mm Pitch - HTD - 25mm Wide
HTD Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 5.000mm Pitch - HTD - 6mm Wide
HTD Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 5.000mm Pitch - HTD - 9mm Wide
HTD Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 5.000mm Pitch - HTD Double Sided - 15mm Wide
HTD Series Metric Timing Belts Double Sided.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 5.30mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 5.000mm Pitch - HTD Double Sided - 6mm Wide
HTD Series Metric Timing Belts Double Sided.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 5.30mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 5.000mm Pitch - HTD Double Sided - 9mm Wide
HTD Series Metric Timing Belts Double Sided.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 5.30mm. Breaking strength is not indicative of working strength.
Related Information:
Pulleys Timing HTD 3mm
Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing HTD 5mm
Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing HTD 3mm
Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - EZ-Lock
Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.
Related Information:
Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - Through Bore
Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.
Aluminium alloy. Finished through bore ready to assemble. Set screw locking.
Related Information:
Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless
Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Moulded single or double flange. No hub.
Suitable for use with shaftloc sleeves.
Related Information:
Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Insert
Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Brass insert.
Related Information:
Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Through Bore
Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.
Aluminium alloy. Finished through bore ready to assemble. Set screw locking.
Related Information:
Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Carbon Steel
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing HTD 5mm
Pulleys - Timing - 5.000mm Pitch - HTD - 15mm Wide - Through Bore
Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 15.0 to 16.0mm wide.
Aluminium Alloy. Finished bore with set screw locking.
Related Information:
Pulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Plastic - Plain
Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. No locking device.
Related Information:
Pulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Through Bore
Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.
Related Information:
Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Carbon Steel
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 126998 products in 2361 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
