Small Parts & Bearings - an MBA company

Belts Timing H Pitch 12.7mm Categories

Belts - Timing - 12.700mm Pitch - H - 15.9mm Wide
Belts - Timing - 12.700mm Pitch - H - 15.9mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:
All 12.7mm H Pitch Through Bore Timing Pulleys - Choose width carefully
All 12.7mm H Pitch Taperlock Timing Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Timing - 12.700mm Pitch - H - 19.1mm Wide
Belts - Timing - 12.700mm Pitch - H - 19.1mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:
All 12.7mm H Pitch Through Bore Timing Pulleys - Choose width carefully
All 12.7mm H Pitch Taperlock Timing Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Timing - 12.700mm Pitch - H - 25.4mm Wide
Belts - Timing - 12.700mm Pitch - H - 25.4mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:
All 12.7mm H Pitch Through Bore Timing Pulleys - Choose width carefully
All 12.7mm H Pitch Taperlock Timing Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Timing - 12.700mm Pitch - H - 38.1mm Wide
Belts - Timing - 12.700mm Pitch - H - 38.1mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:
All 12.7mm H Pitch Through Bore Timing Pulleys - Choose width carefully
All 12.7mm H Pitch Taperlock Timing Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Timing - 12.700mm Pitch - H - 50.8mm Wide
Belts - Timing - 12.700mm Pitch - H - 50.8mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:
All 12.7mm H Pitch Through Bore Timing Pulleys - Choose width carefully
All 12.7mm H Pitch Taperlock Timing Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Timing - 12.700mm Pitch - H - 76.1mm Wide
Belts - Timing - 12.700mm Pitch - H - 76.1mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:
All 12.7mm H Pitch Through Bore Timing Pulleys - Choose width carefully
All 12.7mm H Pitch Taperlock Timing Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Timing - 12.700mm Pitch - H - 9.5mm Wide
Belts - Timing - 12.700mm Pitch - H - 9.5mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:
All 12.7mm H Pitch Through Bore Timing Pulleys - Choose width carefully
All 12.7mm H Pitch Taperlock Timing Pulleys - Choose width carefully
Timing Belts Catalogue PDF

You may also be interested in

Pulleys Timing H Pitch 12.7mm


Pulleys - Timing - 12.700mm Pitch - H - STOCK - Aluminium
Pulleys - Timing - 12.700mm Pitch - H - STOCK - Aluminium

Also see combined categories:
All H 12.7mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:
Belts to suit 12.700 Pitch H Pulleys
Flanges to suit H series pulley stock
Timing Pulleys Catalogue PDF

Pulleys - Timing - 12.700mm Pitch - H - 25.4mm Wide - Taperlock
Pulleys - Timing - 12.700mm Pitch - H - 25.4mm Wide - Taperlock

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Taperlock bush required for bore.

Cast Iron and Steel. Match with a taperlock to suit your bore requirements.

Related Information:
Belts to suit 12.700 Pitch H Pulleys
Taperlock Bushings
Timing Pulleys Catalogue PDF

Pulleys - Timing - 12.700mm Pitch - H - 38.1mm Wide - Taperlock
Pulleys - Timing - 12.700mm Pitch - H - 38.1mm Wide - Taperlock

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Belt width 38.1mm. Taperlock bush required for bore.

Steel and Cast Iron. Match with a taperlock to suit your bore requirements.

Related Information:
Belts to suit 12.700 Pitch H Pulleys
Taperlock Bushings
Timing Pulleys Catalogue PDF

Pulleys - Timing - 12.700mm Pitch - H - 50.8mm Wide - Taperlock
Pulleys - Timing - 12.700mm Pitch - H - 50.8mm Wide - Taperlock

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Belt width 50.8mm. Taperlock bush required for bore.

Steel and Cast Iron. Match with a taperlock to suit your bore requirements.

Related Information:
Belts to suit 12.700 Pitch H Pulleys
Taperlock Bushings
Timing Pulleys Catalogue PDF

Pulleys - Timing - 12.700mm Pitch - H - 76.2mm Wide - Taperlock
Pulleys - Timing - 12.700mm Pitch - H - 76.2mm Wide - Taperlock

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Belt width 76.2mm. Taperlock bush required for bore.

Steel and Cast Iron. Match with a taperlock to suit your bore requirements.

Related Information:
Belts to suit 12.700 Pitch H Pulleys
Taperlock Bushings
Timing Pulleys Catalogue PDF

Pulleys - Timing - 12.700mm Pitch - H - STOCK - Carbon Steel
Pulleys - Timing - 12.700mm Pitch - H - STOCK - Carbon Steel

Also see combined categories:
All H 12.7mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:
Belts to suit 12.700 Pitch H Pulleys
Flanges to suit H series pulley stock
Timing Pulleys Catalogue PDF

Pulleys - Timing - 12.700mm Pitch - H - 25.4mm Wide - Through Bore
Pulleys - Timing - 12.700mm Pitch - H - 25.4mm Wide - Through Bore

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit H Series 12.700mm Pitch. Unfinished Bore.

Cast Iron and Steel. Hub requires drilling and tapping. Bore requires machining to finished size.

Related Information:
Belts to suit 12.700 Pitch H Pulleys
Timing Pulleys Catalogue PDF

Pulleys - Timing - 12.700mm Pitch - H - 38.1mm Wide - Through Bore
Pulleys - Timing - 12.700mm Pitch - H - 38.1mm Wide - Through Bore

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit H Series 12.700mm Pitch. Unfinished Bore.

Steel and Cast Iron. No grub screw. Hub requires drilling and tapping. Bore requires machining to finished size.

Related Information:
Belts to suit 12.700 Pitch H Pulleys
Timing Pulleys Catalogue PDF

Pulleys - Timing - 12.700mm Pitch - H - 50.8mm Wide - Through Bore
Pulleys - Timing - 12.700mm Pitch - H - 50.8mm Wide - Through Bore

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit H Series 12.700mm Pitch. Unfinished Bore.

Steel and Cast Iron. No grub screw. Hub requires drilling and tapping. Bore requires machining to finished size.

Related Information:
Belts to suit 12.700 Pitch H Pulleys
Timing Pulleys Catalogue PDF

Pulleys - Timing - 12.700mm Pitch - H - 76.2mm Wide - Through Bore
Pulleys - Timing - 12.700mm Pitch - H - 76.2mm Wide - Through Bore

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit H Series 12.700mm Pitch. Unfinished Bore.

Steel and Cast Iron. No grub screw. Hub requires drilling and tapping. Bore requires machining to finished size.

Related Information:
Belts to suit 12.700 Pitch H Pulleys
Timing Pulleys Catalogue PDF

Belts Timing L Pitch 9.53mm


Belts - Timing - 9.525mm Pitch - L - 12.7mm Wide
Belts - Timing - 9.525mm Pitch - L - 12.7mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:
All 9.525mm L Pitch Timing Pulleys Through Bore - Choose width carefully
All 9.525mm L Pitch Timing Pulleys Taperlock - Choose width carefully
Timing Belts Catalogue PDF

Belts - Timing - 9.525mm Pitch - L Double Sided - 12.7mm Wide
Belts - Timing - 9.525mm Pitch - L Double Sided - 12.7mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:
All 9.525mm L Pitch Timing Pulleys Through Bore - Choose width carefully
All 9.525mm L Pitch Timing Pulleys Taperlock - Choose width carefully
Timing Belts Catalogue PDF

Pulleys Timing L Pitch 9.53mm


Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Taperlock
Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Taperlock

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.

Black oxide coated steel or cast iron. Match with a taperlock to suit your bore requirements.

Related Information:
Belts to suit 9.525 Pitch L Pulleys - 12mm wide
Taperlock Bushings
Timing Pulleys Catalogue PDF

Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Through Bore
Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Through Bore

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts.

Aluminium alloy and steel. Aluminium have finished bore with set screw. Steel have either finished or unfinished bore as shown in the listings. Unfinished types requires drilling and tapping. Unfinished bore type requires machining to finished size.

Related Information:
Belts to suit 9.525 Pitch L Pulleys - 12mm wide
Double Sided Belts to suit 9.525 Pitch L Pulleys - 12mm wide
Timing Pulleys Catalogue PDF

Belts - Wedge - 12.7 x 10.0mm - SPA
Belts - Wedge - 12.7 x 10.0mm - SPA

Also see combined categories:
All Vee Belts 12.5mm and 12.7mm Top Width

12.7mm Top Width x 10.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:
Vee Pulleys - Idler

Belts - Vee - 12.7 x 7.9mm - Notched AX
Belts - Vee - 12.7 x 7.9mm - Notched AX

Also see combined categories:
All Vee Belts 12.5mm and 12.7mm Top Width

12.7mm Top Width x 7.9mm Height.


Related Information:
Vee Pulleys - Idler

Pulleys - Timing - Idler
Pulleys - Timing - Idler

Also see combined categories:
All Idler Pulleys

Complete with Needle Roller Bearing.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.

Related Information:
Tensioners
Timing Belts (See types under T)
Idler Shafts

Belts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide
Belts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:
All 2.073mm 40DP Pitch Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide
Belts - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:
All 2.073mm 40DP Pitch Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide
Belts - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:
All 2.073mm 40DP Pitch Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide
Belts - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:
All 2.073mm 40DP Pitch Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:
All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:
All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:
All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:
All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:
All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:
All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:
All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Timing - 5.000mm Pitch - AT5 - 10mm Wide
Belts - Timing - 5.000mm Pitch - AT5 - 10mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Timing - 5.000mm Pitch - AT5 - 12mm Wide
Belts - Timing - 5.000mm Pitch - AT5 - 12mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Timing - 5.000mm Pitch - AT5 - 16mm Wide
Belts - Timing - 5.000mm Pitch - AT5 - 16mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Timing - 5.000mm Pitch - AT5 - 20mm Wide
Belts - Timing - 5.000mm Pitch - AT5 - 20mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Timing - 5.000mm Pitch - AT5 - 25mm Wide
Belts - Timing - 5.000mm Pitch - AT5 - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Timing - 5.000mm Pitch - AT5 - 6mm Wide
Belts - Timing - 5.000mm Pitch - AT5 - 6mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
Timing Belts Catalogue PDF

Belts - Timing - 5.000mm Pitch - AT5 - 8mm Wide
Belts - Timing - 5.000mm Pitch - AT5 - 8mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
Timing Belts Catalogue PDF

Belts - Timing - 14.000mm Pitch - GT - 115mm Wide
Belts - Timing - 14.000mm Pitch - GT - 115mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:
All 14mm Pitch Taperlock Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Timing - 14.000mm Pitch - GT - 170mm Wide
Belts - Timing - 14.000mm Pitch - GT - 170mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:
All 14mm Pitch Taperlock Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Timing - 14.000mm Pitch - GT - 40mm Wide
Belts - Timing - 14.000mm Pitch - GT - 40mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:
All 14mm Pitch Taperlock Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Timing - 14.000mm Pitch - GT - 55mm Wide
Belts - Timing - 14.000mm Pitch - GT - 55mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:
All 14mm Pitch Taperlock Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Timing - 14.000mm Pitch - GT - 85mm Wide
Belts - Timing - 14.000mm Pitch - GT - 85mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:
All 14mm Pitch Taperlock Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Timing - 2.000mm Pitch - GT - 3mm Wide
Belts - Timing - 2.000mm Pitch - GT - 3mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:
All 2mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Timing - 2.000mm Pitch - GT - 4mm Wide
Belts - Timing - 2.000mm Pitch - GT - 4mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:
All 2mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Timing - 2.000mm Pitch - GT - 6mm Wide
Belts - Timing - 2.000mm Pitch - GT - 6mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:
All 2mm Pitch Pulleys - Choose width and pitch style carefully
Pulleys stock - 2.000mm GT2 Pitch.
Timing Belts Catalogue PDF




Main Pages

About Us

About Us
 Balls List

Balls List
 Bearings List

Bearings List
 Brands

Brands
 Catalogue

Catalogue
 Contact Us

Contact Us
 Charity

Charity
 Dental Bearings

Dental Bearings
 Dowel Pins

Dowel Pins
 Downloadable PDF Catalogue Ball Lock Pins

Downloadable PDF Catalogue Ball Lock Pins
 Downloadable PDF Catalogue Balls

Downloadable PDF Catalogue Balls
 Downloadable PDF Catalogue Ceramic Bearings

Downloadable PDF Catalogue Ceramic Bearings
 Downloadable PDF Catalogue Circlips

Downloadable PDF Catalogue Circlips
 Downloadable PDF Catalogue Clevis Pins

Downloadable PDF Catalogue Clevis Pins
 Downloadable PDF Catalogue Corrosion Resistant Bearings

Downloadable PDF Catalogue Corrosion Resistant Bearings
 Downloadable PDF Catalogue Disc Springs

Downloadable PDF Catalogue Disc Springs
 Downloadable PDF Catalogue Dowel Pins

Downloadable PDF Catalogue Dowel Pins
 Downloadable PDF Catalogue Economy Bearings

Downloadable PDF Catalogue Economy Bearings
 Downloadable PDF Catalogue Hammer Drive Pins

Downloadable PDF Catalogue Hammer Drive Pins
 Downloadable PDF Catalogue High Speed Bearings

Downloadable PDF Catalogue High Speed Bearings
 Downloadable PDF Catalogue Key Steel

Downloadable PDF Catalogue Key Steel
 Downloadable PDF Catalogue Knobs

Downloadable PDF Catalogue Knobs
 Downloadable PDF Catalogue Leveling Mounts

Downloadable PDF Catalogue Leveling Mounts
 Downloadable PDF Catalogue Metallic Bushes

Downloadable PDF Catalogue Metallic Bushes
 Downloadable PDF Catalogue O-Rings

Downloadable PDF Catalogue O-Rings
 Downloadable PDF Catalogue Pins

Downloadable PDF Catalogue Pins
 Downloadable PDF Catalogue Plastic Bearings

Downloadable PDF Catalogue Plastic Bearings
 Downloadable PDF Catalogue Polyvee Belts and Pulleys

Downloadable PDF Catalogue Polyvee Belts and Pulleys
 Downloadable PDF Catalogue Precision Shim Washers

Downloadable PDF Catalogue Precision Shim Washers
 Downloadable PDF Catalogue Push On and Push In Rings

Downloadable PDF Catalogue Push On and Push In Rings
 Downloadable PDF Catalogue Rod & Tube

Downloadable PDF Catalogue Rod & Tube
 Downloadable PDF Catalogue Roll Pins

Downloadable PDF Catalogue Roll Pins
 Downloadable PDF Catalogue Shaft Collars

Downloadable PDF Catalogue Shaft Collars
 Downloadable PDF Catalogue Shim Sheet

Downloadable PDF Catalogue Shim Sheet
 Downloadable PDF Catalogue Shoulder Screws

Downloadable PDF Catalogue Shoulder Screws
 Downloadable PDF Catalogue Sintered Bronze Bushes

Downloadable PDF Catalogue Sintered Bronze Bushes
 Downloadable PDF Catalogue Snap Rings

Downloadable PDF Catalogue Snap Rings
 Downloadable PDF Catalogue Socket Set Screws

Downloadable PDF Catalogue Socket Set Screws
 Downloadable PDF Catalogue Solid Bronze Bushes

Downloadable PDF Catalogue Solid Bronze Bushes
 Downloadable PDF Catalogue Spring Steel Strip

Downloadable PDF Catalogue Spring Steel Strip
 Downloadable PDF Catalogue Springs

Downloadable PDF Catalogue Springs
 Downloadable PDF Catalogue Standard Ball Bearing Range

Downloadable PDF Catalogue Standard Ball Bearing Range
 Downloadable PDF Catalogue Super Precision Bearings

Downloadable PDF Catalogue Super Precision Bearings
 Downloadable PDF Catalogue Taper Pins

Downloadable PDF Catalogue Taper Pins
 Downloadable PDF Catalogue Thrust Bearings

Downloadable PDF Catalogue Thrust Bearings
 Downloadable PDF Catalogue Thumb Screws and Nuts

Downloadable PDF Catalogue Thumb Screws and Nuts
 Downloadable PDF Catalogue Timing Belts

Downloadable PDF Catalogue Timing Belts
 Downloadable PDF Catalogue Timing Pulley Stock

Downloadable PDF Catalogue Timing Pulley Stock
 Downloadable PDF Catalogue Timing Pulleys

Downloadable PDF Catalogue Timing Pulleys
 Downloadable PDF Catalogue Vibration Mounts

Downloadable PDF Catalogue Vibration Mounts
 Downloadable PDF Catalogue Washers

Downloadable PDF Catalogue Washers
 Downloadable PDF Catalogue Wave Washers

Downloadable PDF Catalogue Wave Washers
 Downloadable PDF Cross Reference ADR and SKF

Downloadable PDF Cross Reference ADR and SKF
 Downloadable PDF Cross Reference Anderton Circlips

Downloadable PDF Cross Reference Anderton Circlips
 Downloadable PDF Cross Reference Barden Bearings

Downloadable PDF Cross Reference Barden Bearings
 Downloadable PDF Cross Reference Essentra

Downloadable PDF Cross Reference Essentra
 Downloadable PDF Cross Reference Flocast

Downloadable PDF Cross Reference Flocast
 Downloadable PDF Cross Reference K&S Metals

Downloadable PDF Cross Reference K&S Metals
 Downloadable PDF Cross Reference McMaster Carr

Downloadable PDF Cross Reference McMaster Carr
 Downloadable PDF Cross Reference Miniature Precison Bearings

Downloadable PDF Cross Reference Miniature Precison Bearings
 Downloadable PDF Cross Reference Nordex

Downloadable PDF Cross Reference Nordex
 Downloadable PDF Cross Reference NSK and NTN

Downloadable PDF Cross Reference NSK and NTN
 Downloadable PDF Cross Reference Ondrives

Downloadable PDF Cross Reference Ondrives
 Downloadable PDF Cross Reference Reid Supply

Downloadable PDF Cross Reference Reid Supply
 Downloadable PDF Cross Reference SDP-SI Designatronics

Downloadable PDF Cross Reference SDP-SI Designatronics
 Downloadable PDF Cross Reference Seeger Circlips

Downloadable PDF Cross Reference Seeger Circlips
 Downloadable PDF Cross Reference Sintered Bronze

Downloadable PDF Cross Reference Sintered Bronze
 Downloadable PDF Cross Reference Small Parts Inc

Downloadable PDF Cross Reference Small Parts Inc
 Downloadable PDF Cross Reference Timing Belts and Pulleys

Downloadable PDF Cross Reference Timing Belts and Pulleys
 Freight Rates and Shipping Times

Freight Rates and Shipping Times
 Frequently Asked Questions

Frequently Asked Questions
 Google Search

Google Search
 Hobby Clearance

Hobby Clearance
 Hobby Information

Hobby Information
 Large Bearings

Large Bearings
 Mailorder Form

Mailorder Form
 Order History

Order History
 Ordering

Ordering
 Payment and Shipping

Payment and Shipping
 Privacy

Privacy
 Product Showcase

Product Showcase
 Shipping Rates and Times

Shipping Rates and Times
 Technical

Technical
 Terms

Terms


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 131198 products in 2163 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

 
About Us Balls List Bearings List Bearings and Balls Brands Catalogue Charity
Paypal Accepted
Paypal
Secure Checkout
Clamping and Locking Contact Us Control Products Dental Bearings Dental Dowel Pins Downloadable PDF Catalogue Ball Lock Pins Downloadable PDF Catalogue Balls
Visa Card Accepted
Visa
Secure Checkout
Downloadable PDF Catalogue Ceramic Bearings Downloadable PDF Catalogue Circlips Downloadable PDF Catalogue Clevis Pins Downloadable PDF Catalogue Corrosion Resistant Bearings Downloadable PDF Catalogue Disc Springs Downloadable PDF Catalogue Dowel Pins Downloadable PDF Catalogue Economy Bearings Downloadable PDF Catalogue Hammer Drive Pins
Master Card Accepted
Mastercard
Secure Checkout
Downloadable PDF Catalogue High Speed Bearings Downloadable PDF Catalogue Key Steel Downloadable PDF Catalogue Knobs Downloadable PDF Catalogue Leveling Mounts Downloadable PDF Catalogue Metallic Bushes Downloadable PDF Catalogue O-Rings Downloadable PDF Catalogue Pins Downloadable PDF Catalogue Plastic Bearings
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Downloadable PDF Catalogue Polyvee Belts and Pulleys Downloadable PDF Catalogue Precision Shim Washers Downloadable PDF Catalogue Push On and Push In Rings Downloadable PDF Catalogue Rod & Tube Downloadable PDF Catalogue Roll Pins Downloadable PDF Catalogue Shaft Collars Downloadable PDF Catalogue Shim Sheet Downloadable PDF Catalogue Shoulder Screws
Amex Accepted
Amex
Secure Checkout
Downloadable PDF Catalogue Sintered Bronze Bushes Downloadable PDF Catalogue Snap Rings Downloadable PDF Catalogue Socket Set Screws Downloadable PDF Catalogue Solid Bronze Bushes Downloadable PDF Catalogue Spring Steel Strip Downloadable PDF Catalogue Springs Downloadable PDF Catalogue Standard Ball Bearing Range Downloadable PDF Catalogue Super Precision Bearings
Paypal Accepted
Paypal
Secure Checkout
Downloadable PDF Catalogue Taper Pins Downloadable PDF Catalogue Thrust Bearings Downloadable PDF Catalogue Thumb Screws and Nuts Downloadable PDF Catalogue Timing Belts Downloadable PDF Catalogue Timing Pulley Stock Downloadable PDF Catalogue Timing Pulleys Downloadable PDF Catalogue Vibration Mounts Downloadable PDF Catalogue Washers
Visa Card Accepted
Visa
Secure Checkout
Downloadable PDF Catalogue Wave Washers Downloadable PDF Cross Reference ADR and SKF Downloadable PDF Cross Reference Anderton Circlips Downloadable PDF Cross Reference Barden Bearings Downloadable PDF Cross Reference Essentra Downloadable PDF Cross Reference Flocast Downloadable PDF Cross Reference K&S Metals Downloadable PDF Cross Reference McMaster Carr
Master Card Accepted
Mastercard
Secure Checkout
Downloadable PDF Cross Reference Miniature Precison Bearings Downloadable PDF Cross Reference NSK and NTN Downloadable PDF Cross Reference Nordex Downloadable PDF Cross Reference Ondrives Downloadable PDF Cross Reference Reid Supply Downloadable PDF Cross Reference SDP-SI Designatronics Downloadable PDF Cross Reference Seeger Circlips Downloadable PDF Cross Reference Sintered Bronze
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Downloadable PDF Cross Reference Small Parts Inc Downloadable PDF Cross Reference Timing Belts and Pulleys Fasteners Freight Rates and Shipping Times Frequently Asked Questions Games and Toys Gears Google Search
Amex Accepted
Amex
Secure Checkout
Hobby Clearance (Link) Hobby Information Kits Large Bearings (Link) Linear Bearings and Systems Literature Magnets Mailorder Form
Paypal Accepted
Paypal
Secure Checkout
Materials Miscellaneous Order History Ordering Packing and Display Payment and Shipping Power Transmission Privacy
Visa Card Accepted
Visa
Secure Checkout
Product Showcase Seals Shaft Couplings Shafting Shipping Rates and Times Springs and Retraction Storage Technical
Master Card Accepted
Mastercard
Secure Checkout
Terms Timing Belts and Pulleys Tools Vibration Control

Products

Adjusters Air Springs Allthread Angle Assortments Backup Rings Ball Joints Ball Parallels Ball Screw Accessories
Paypal Accepted
Paypal
Secure Checkout
Ball Screws 16mm SDP Ball Screws Ground Ball Screws Nook Series Ball Screws Rolled Ball Splines Linear Ball Transfers Balls Ceramic Balls Metallic Balls Plastic Balls Rubber
Visa Card Accepted
Visa
Secure Checkout
Bar and Rod Batteries Bearings Angular Contact Bearings Ceramic Bearings Conveyor Bearings Double Row Ball Bearings Flanged Ball Bearings Grooved Profile Bearings Housings Bearings Mounted
Master Card Accepted
Mastercard
Secure Checkout
Bearings Needle Roller Bearings One Way Clutch Bearings Pivot Bearings Plastic Bearings Plates Bearings Press In Bearings Single Row Ball Bearings Special Purpose Bearings Stainless Special Grades Bearings Tapered Roller
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Bearings Thrust Bearings and Housings Insert Bearings for Dental Equipment Bearings for Housings Bearings for Skating Belts Poly Vee Belts Posi-Drive Belts Rounthane Belts Timing 40DP LT Pitch Belts Timing AT10 10mm
Amex Accepted
Amex
Secure Checkout
Belts Timing AT5 5mm Belts Timing GT2 -14mm Belts Timing GT2 2mm Belts Timing GT2 3mm Belts Timing GT2 5mm Belts Timing GT2 8mm Belts Timing H Pitch 12.7mm Belts Timing HTD -14mm Belts Timing HTD 3mm Belts Timing HTD 5mm
Paypal Accepted
Paypal
Secure Checkout
Belts Timing HTD 8mm Belts Timing L Pitch 9.53mm Belts Timing MXL Pitch Belts Timing T01 1mm Belts Timing T015 1.5mm Belts Timing T10 10mm Belts Timing T2.5 2.5mm Belts Timing T5 5mm Belts Timing XL Pitch 5.08mm Bumpers
Visa Card Accepted
Visa
Secure Checkout
Bungs Bushes Bronze Bushes Plastic Bushes Steel Bushings Spherical Cable Ties Cable Cam Followers Castors Accessories Castors Plate
Master Card Accepted
Mastercard
Secure Checkout
Castors Stud Catalogues Catches Chain and Sprockets Ladder Chain and Sprockets Roller Channel Circlips Clamping Bushings Clamping Rings Clamps
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Clevis Joints Clips Clutches Collars Couplings Disk Couplings Geargrip Couplings Helical and Slit Couplings Insert and Jaw Couplings Other Couplings Rigid
Amex Accepted
Amex
Secure Checkout
Couplings Sleeve Cross Blocks Dampers Dual Vee Bearings Engineering and Hobby Rod Eyebolts Fastening Bushings Flexible Shaft Framing Gas Springs
Paypal Accepted
Paypal
Secure Checkout
Gear Blanks Gear Racks Flexible Gearboxes Cross Axis Gearboxes Right Angle Gearboxes Tee Gearheads Inline Gearmotors Basic Gearmotors DC Gearmotors Open Gearmotors Permanent Magnet
Visa Card Accepted
Visa
Secure Checkout
Gears Cluster Gears Inch Bevel Gears Inch Mitre Gears Inch Racks Gears Inch Spur Gears Inch Worms Gears Metric Bevel Gears Metric Mitre Gears Metric Racks Gears Metric Spiral Mitre
Master Card Accepted
Mastercard
Secure Checkout
Gears Metric Spur Gears Metric Worms Gifts Handles Handpiece Parts Hobby Accessories Hobby Gears Hobby Servo Motors Hobby Shafting
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Hobby Wheels Hooks Housings for Ball Bearings Housings with Bearing Hubs Insulator Strips Insulators Isolators Keys and Keysteel Keys
Amex Accepted
Amex
Secure Checkout
Knobs Ball Knobs Cabinet Knobs Cross Knobs Knurled Knobs Lever Knobs Lobe Knobs Mushroom Knobs Oval Knobs Pointer Knobs Push Pull
Paypal Accepted
Paypal
Secure Checkout
Knobs Round Knobs Star Knobs Thumb Knobs Tri Knobs Valve Knobs Wing Lanyards Latches Draw Latches Handle Latches Other
Visa Card Accepted
Visa
Secure Checkout
Latches Quarter Turn Latches Rotary Action Latches Slam Action Lazy Susans Leads and Connectors Leadscrew Actuators Leadscrews Levers Linear Bearing Housings Linear Bearings with Housing
Master Card Accepted
Mastercard
Secure Checkout
Linear Bearings Linear Slides Locking Assemblies Locking Bushings Magnets Alcomax Magnets Alnico Magnets Ceramic Magnets Cup Magnets Rare Earth Magnets Rubber and Vinyl
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Measuring Gauges Motors DC Motors Vibrating Mounts Base Mounts Bonded Mounts Centrebolt Mounts Conical Mounts Cup Mounts Cylindrical Mounts Leveling
Amex Accepted
Amex
Secure Checkout
Mounts Machinery Mounts Plate Mounts Rectangular Mounts Wedge Nuts Dome Nuts Hex Nuts Lock for Bearings Nuts Lock Nuts Specialty Nuts Thumb
Paypal Accepted
Paypal
Secure Checkout
Nuts Wing O-Rings for Dental Applications O-Rings Oil Seals Packing Boxes and Materials Pillars Pinion Wire Imperial Pins Ball Lock Pins Clevis Pins Cotter
Visa Card Accepted
Visa
Secure Checkout
Pins Dowel Pins General Pins Locating Pins Pull Pins Roll Pins Taper Pins Wirelock Plugs Plungers Ball Plungers Indexing
Master Card Accepted
Mastercard
Secure Checkout
Plungers Spring Positioning Pressure Rollers Protective Packing and Sleeves Pulley Blocks Pulleys Flanges Pulleys Grooved Pulleys Idler Pulleys Poly Vee Pulleys Timing 40DP LT Pitch
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Pulleys Timing AT10 10mm Pulleys Timing AT5 5mm Pulleys Timing GT2 -14mm Pulleys Timing GT2 2mm Pulleys Timing GT2 3mm Pulleys Timing GT2 5mm Pulleys Timing GT2 8mm Pulleys Timing H Pitch 12.7mm Pulleys Timing HTD 3mm Pulleys Timing HTD 5mm
Amex Accepted
Amex
Secure Checkout
Pulleys Timing HTD 8mm Pulleys Timing L Pitch 9.53mm Pulleys Timing MXL Pitch Pulleys Timing T01 1mm Pulleys Timing T10 10mm Pulleys Timing T2.5 2.5mm Pulleys Timing T5 5mm Pulleys Timing XL Pitch 5.08mm Pulleys Vee Punches
Paypal Accepted
Paypal
Secure Checkout
RC Car and Buggy Wheels RC Propellers and Adaptors RC Spare Parts Ratchets and Pawls Robotic Wheels Rod Ends PTFE Lined Rod Ends Plastic Rod Ends Stainless Steel Rod Ends Stamped Rod Ends Standard
Visa Card Accepted
Visa
Secure Checkout
Rod Ends Studded Rollers Screws Button Head Screws Cap Head Screws Captive Screws Cheese Head Screws Coach Screws Countersunk Screws Grub Screws Hex Head
Master Card Accepted
Mastercard
Secure Checkout
Screws Large Head Screws Pan Head Screws Panel Screws Round Head Screws Security Screws Self Tapping Screws Shoulder Screws Square Head Screws Thumb Screws Wood
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Seals and Sealing Sets Shaft Extenders and Reducers Shafting Aluminium Shafting General Purpose Shafting Precision Ground Shaftloc Shim Shock Absorbers Sleeves
Amex Accepted
Amex
Secure Checkout
Snap Buttons Snaps Soldering Spacers Spare Part Boxes Spring Anchors Spring Motors Spring Mounts Spring Washers Spring Wire
Paypal Accepted
Paypal
Secure Checkout
Springs Compression Springs Constant Force Springs Die Springs Disc Springs Extension Springs General Springs Torsion Spur Gear Stock Inch Square Shaft Stays
Visa Card Accepted
Visa
Secure Checkout
Stops Spring Strip Stroke Rotary Bushings Studs Suction Cups Switches Tape Tee Joints Tension Bushings Tensioners
Master Card Accepted
Mastercard
Secure Checkout
Thread Inserts Timing Belt Lengths Tips Tolerance Rings Tooling Balls Tools Bending Tools Bits Tools Circlip Tools Cutting Tools Deburring
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Tools General Tools Measuring Tools Pullers Tools Screw Extractors Tools Threading Tube and Tubing Turntables Universal Joint Covers Universal Joints Single Universal Joints Telescoping
Amex Accepted
Amex
Secure Checkout
V-Rings Vee Belts Washers Aligning Washers Finishing Washers Flat Fibre Washers Flat Metallic Washers Flat Plastic Washers Flat Rubber Washers Lock Washers Locking
Paypal Accepted
Paypal
Secure Checkout
Washers Serrated Locking Washers Shoulder Washers Square Washers Thrust Wear Strips Wheels Industrial Wheels RC Plane Wrenches Yoke Ends

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 131198 products in 2163 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.