Belts Timing H Pitch 12.7mm Categories
Category Matches
Belts Timing H Pitch 12.7mm
TopHide PicturesBelts - Timing - 12.700mm Pitch - H - 15.9mm Wide

Search Rating: 100%
Also see combined categories:
All H 12.7mm Pitch Timing Belts
Standard Series Timing Belts 12.700mm or 0.500 inch pitch.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
Belts - Timing - 12.700mm Pitch - H - 19.1mm Wide

Search Rating: 100%
Also see combined categories:
All H 12.7mm Pitch Timing Belts
Standard Series Timing Belts 12.700mm or 0.500 inch pitch.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
Belts - Timing - 12.700mm Pitch - H - 25.4mm Wide

Search Rating: 100%
Also see combined categories:
All H 12.7mm Pitch Timing Belts
Standard Series Timing Belts 12.700mm or 0.500 inch pitch.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
Belts - Timing - 12.700mm Pitch - H - 38.1mm Wide

Search Rating: 100%
Also see combined categories:
All H 12.7mm Pitch Timing Belts
Standard Series Timing Belts 12.700mm or 0.500 inch pitch.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
Belts - Timing - 12.700mm Pitch - H - 50.8mm Wide

Search Rating: 100%
Also see combined categories:
All H 12.7mm Pitch Timing Belts
Standard Series Timing Belts 12.700mm or 0.500 inch pitch.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
Belts - Timing - 12.700mm Pitch - H - 76.1mm Wide

Search Rating: 100%
Also see combined categories:
All H 12.7mm Pitch Timing Belts
Standard Series Timing Belts 12.700mm or 0.500 inch pitch.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
Belts - Timing - 12.700mm Pitch - H - 9.5mm Wide

Search Rating: 100%
Also see combined categories:
All H 12.7mm Pitch Timing Belts
Standard Series Timing Belts 12.700mm or 0.500 inch pitch.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
Belts Timing L Pitch 9.53mm
TopHide PicturesBelts - Timing - 9.525mm Pitch - L - 12.7mm Wide

Search Rating: 88%
Also see combined categories:
All L 9.525mm Pitch Timing Belts
Standard Series Timing Belts 9.525mm or 0.375 inch pitch.
Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.
Belts Timing XL Pitch 5.08mm
TopHide PicturesBelts - Timing - 5.080mm Pitch - XL - 12.7mm Wide

Search Rating: 88%
Also see combined categories:
All XL 5.08mm Pitch Timing Belts
Standard Series Timing Belts 5.080mm or 0.200 inch pitch. 12mm or 12.7mm width.
Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
Belts Timing L Pitch 9.53mm
TopHide PicturesBelts - Timing - 9.525mm Pitch - L Double Sided - 12.7mm Wide

Search Rating: 88%
Also see combined categories:
All L 9.525mm Pitch Timing Belts
Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.
Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.
Belts Timing XL Pitch 5.08mm
TopHide PicturesBelts - Timing - 5.080mm Pitch - XL Double Sided - 12.7mm Wide

Search Rating: 88%
Also see combined categories:
All XL 5.08mm Pitch Timing Belts
Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.
Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
Pulleys Timing L Pitch 9.53mm
TopHide PicturesPulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Taperlock

Search Rating: 86%
Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Taperlock
Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.
Black oxide coated steel or cast iron. Match with a taperlock to suit your bore requirements.
Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Through Bore

Search Rating: 86%
Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts.
Aluminium alloy and steel. Aluminium have finished bore with set screw. Steel have either finished or unfinished bore as shown in the listings. Unfinished types requires drilling and tapping. Unfinished bore type requires machining to finished size.
Pulleys Timing H Pitch 12.7mm
TopHide PicturesPulleys - Timing - 12.700mm Pitch - H - STOCK - Aluminium

Search Rating: 85%
Also see combined categories:
All H 12.7mm Pitch Timing Pulley Stock
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Pulleys - Timing - 12.700mm Pitch - H - 25.4mm Wide - Taperlock

Search Rating: 85%
Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock
Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Taperlock bush required for bore.
Cast Iron and Steel. Match with a taperlock to suit your bore requirements.
Pulleys - Timing - 12.700mm Pitch - H - 38.1mm Wide - Taperlock

Search Rating: 85%
Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock
Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Belt width 38.1mm. Taperlock bush required for bore.
Steel and Cast Iron. Match with a taperlock to suit your bore requirements.
Pulleys - Timing - 12.700mm Pitch - H - 50.8mm Wide - Taperlock

Search Rating: 85%
Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock
Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Belt width 50.8mm. Taperlock bush required for bore.
Steel and Cast Iron. Match with a taperlock to suit your bore requirements.
Pulleys - Timing - 12.700mm Pitch - H - 76.2mm Wide - Taperlock

Search Rating: 85%
Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock
Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Belt width 76.2mm. Taperlock bush required for bore.
Steel and Cast Iron. Match with a taperlock to suit your bore requirements.
Pulleys - Timing - 12.700mm Pitch - H - STOCK - Carbon Steel

Search Rating: 85%
Also see combined categories:
All H 12.7mm Pitch Timing Pulley Stock
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Pulleys - Timing - 12.700mm Pitch - H - 25.4mm Wide - Through Bore

Search Rating: 73%
Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit H Series 12.700mm Pitch. Unfinished Bore.
Cast Iron and Steel. Hub requires drilling and tapping. Bore requires machining to finished size.
Pulleys - Timing - 12.700mm Pitch - H - 38.1mm Wide - Through Bore

Search Rating: 73%
Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit H Series 12.700mm Pitch. Unfinished Bore.
Steel and Cast Iron. No grub screw. Hub requires drilling and tapping. Bore requires machining to finished size.
Pulleys - Timing - 12.700mm Pitch - H - 50.8mm Wide - Through Bore

Search Rating: 73%
Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit H Series 12.700mm Pitch. Unfinished Bore.
Steel and Cast Iron. No grub screw. Hub requires drilling and tapping. Bore requires machining to finished size.
Pulleys - Timing - 12.700mm Pitch - H - 76.2mm Wide - Through Bore

Search Rating: 73%
Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit H Series 12.700mm Pitch. Unfinished Bore.
Steel and Cast Iron. No grub screw. Hub requires drilling and tapping. Bore requires machining to finished size.
Vee Belts
TopHide PicturesBelts - Wedge - 12.7 x 10.0mm - SPA

Search Rating: 51%
Also see combined categories:
All Vee Belts 12.5mm and 12.7mm Top Width
12.7mm Top Width x 10.0mm Height.
Sizes are nominal and may vary slightly.
Belts - Vee - 12.7 x 7.9mm - Notched AX

Search Rating: 51%
Also see combined categories:
All Vee Belts 12.5mm and 12.7mm Top Width
12.7mm Top Width x 7.9mm Height.
Pulleys Idler
TopHide PicturesPulleys - Timing - Idler

Search Rating: 50%
Also see combined categories:
All Idler Pulleys
Complete with Needle Roller Bearing.
Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.
Belts Timing 40DP LT Pitch
TopHide PicturesBelts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide

Search Rating: 50%
Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide

Search Rating: 50%
Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide

Search Rating: 50%
Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide

Search Rating: 50%
Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Belts Timing AT10 10mm
TopHide PicturesBelts - Timing - 10.000mm Pitch - AT10 - 10mm Wide

Search Rating: 50%
Also see combined categories:
All 10mm Pitch Timing Belts
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.
Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide

Search Rating: 50%
Also see combined categories:
All 10mm Pitch Timing Belts
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.
Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide

Search Rating: 50%
Also see combined categories:
All 10mm Pitch Timing Belts
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.
Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide

Search Rating: 50%
Also see combined categories:
All 10mm Pitch Timing Belts
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.
Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide

Search Rating: 50%
Also see combined categories:
All 10mm Pitch Timing Belts
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.
Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide

Search Rating: 50%
Also see combined categories:
All 10mm Pitch Timing Belts
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.
Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide

Search Rating: 50%
Also see combined categories:
All 10mm Pitch Timing Belts
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Breaking strength is not indicative of working strength.
Belts Timing AT5 5mm
TopHide PicturesBelts - Timing - 5.000mm Pitch - AT5 - 10mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Belts - Timing - 5.000mm Pitch - AT5 - 12mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Belts - Timing - 5.000mm Pitch - AT5 - 16mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Belts - Timing - 5.000mm Pitch - AT5 - 20mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Belts - Timing - 5.000mm Pitch - AT5 - 25mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Belts - Timing - 5.000mm Pitch - AT5 - 6mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Belts - Timing - 5.000mm Pitch - AT5 - 8mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Belts Timing GT2 -14mm
TopHide PicturesBelts - Timing - 14.000mm Pitch - GT2 - 115mm Wide

Search Rating: 50%
Also see combined categories:
All 14mm Pitch Timing Belts
GT2 Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Belts - Timing - 14.000mm Pitch - GT2 - 170mm Wide

Search Rating: 50%
Also see combined categories:
All 14mm Pitch Timing Belts
GT2 Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Belts - Timing - 14.000mm Pitch - GT2 - 40mm Wide

Search Rating: 50%
Also see combined categories:
All 14mm Pitch Timing Belts
GT2 Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Belts - Timing - 14.000mm Pitch - GT2 - 55mm Wide

Search Rating: 50%
Also see combined categories:
All 14mm Pitch Timing Belts
GT2 Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Belts - Timing - 14.000mm Pitch - GT2 - 85mm Wide

Search Rating: 50%
Also see combined categories:
All 14mm Pitch Timing Belts
GT2 Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Belts Timing GT2 2mm
TopHide PicturesBelts - Timing - 2.000mm Pitch - GT2 - 3mm Wide

Search Rating: 50%
Also see combined categories:
All 2mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.000mm Pitch - GT2 - 4mm Wide

Search Rating: 50%
Also see combined categories:
All 2mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. For easy ready selected sets of timing belts and pulleys please see the HES website.
Belts - Timing - 2.000mm Pitch - GT2 - 6mm Wide

Search Rating: 50%
Also see combined categories:
All 2mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.000mm Pitch - GT2 - 9mm Wide

Search Rating: 50%
Also see combined categories:
All 2mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.000mm Pitch - GT2 - Clean - 6mm Wide

Search Rating: 50%
Also see combined categories:
All 2mm Pitch Timing Belts
PowerGrip(R) TruMotion(R) Timing Belts in 2.000mm.
The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. Pitch (P) - 2.00mm, Tooth Height (H) - 0.76mm, Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
Belts Timing GT2 3mm
TopHide PicturesBelts - Timing - 3.000mm Pitch - GT2 - 15mm Wide

Search Rating: 50%
Also see combined categories:
All 3mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.
Belts - Timing - 3.000mm Pitch - GT2 - 6mm Wide

Search Rating: 50%
Also see combined categories:
All 3mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.
Belts - Timing - 3.000mm Pitch - GT2 - 9mm Wide

Search Rating: 50%
Also see combined categories:
All 3mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.
Belts - Timing - 3.000mm Pitch - GT2 - Double Sided - 15mm Wide

Search Rating: 50%
Also see combined categories:
All 3mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.
Belts - Timing - 3.000mm Pitch - GT2 - Double Sided - 6mm Wide

Search Rating: 50%
Also see combined categories:
All 3mm Pitch Timing Belts
GT2 Series Metric Timing Belts Double Sided
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.
Belts - Timing - 3.000mm Pitch - GT2 - Double Sided - 9mm Wide

Search Rating: 50%
Also see combined categories:
All 3mm Pitch Timing Belts
GT2 Series Metric Timing Belts Double Sided
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.
Belts Timing GT2 5mm
TopHide PicturesBelts - Timing - 5.000mm Pitch - GT2 - 15mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.
Belts - Timing - 5.000mm Pitch - GT2 - 25mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
Belts - Timing - 5.000mm Pitch - GT2 - 9mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.
Belts - Timing - 5.000mm Pitch - GT2 - Double Sided - 15mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
GT2 Series Metric Timing Belts Double Sided
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 5.00mm. Breaking strength is not indicative of working strength.
Belts - Timing - 5.000mm Pitch - GT2 - Double Sided - 9mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
GT2 Series Metric Timing Belts Double Sided
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 5.00mm. Breaking strength is not indicative of working strength.
Belts Timing GT2 8mm
TopHide PicturesBelts - Timing - 8.000mm Pitch - GT2 - 12mm Wide

Search Rating: 50%
Also see combined categories:
All 8mm Pitch Timing Belts
GT2 Series Metric Timing Belts
Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.
Belts - Timing - 8.000mm Pitch - GT2 - 20mm Wide

Search Rating: 50%
Also see combined categories:
All 8mm Pitch Timing Belts
GT2 Series Metric Timing Belts
Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.
Belts - Timing - 8.000mm Pitch - GT2 - 30mm Wide

Search Rating: 50%
Also see combined categories:
All 8mm Pitch Timing Belts
GT2 Series Metric Timing Belts
Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.
Belts - Timing - 8.000mm Pitch - GT2 - 50mm Wide

Search Rating: 50%
Also see combined categories:
All 8mm Pitch Timing Belts
GT2 Series Metric Timing Belts
Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.
Belts - Timing - 8.000mm Pitch - GT2 - 85mm Wide

Search Rating: 50%
Also see combined categories:
All 8mm Pitch Timing Belts
GT2 Series Metric Timing Belts
Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.
Belts Timing HTD 14mm
TopHide PicturesBelts - Timing - 14.000mm Pitch - HTD - 115mm Wide

Search Rating: 50%
Also see combined categories:
All 14mm Pitch Timing Belts
HTD Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Belts - Timing - 14.000mm Pitch - HTD - 170mm Wide

Search Rating: 50%
Also see combined categories:
All 14mm Pitch Timing Belts
HTD Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Belts - Timing - 14.000mm Pitch - HTD - 40mm Wide

Search Rating: 50%
Also see combined categories:
All 14mm Pitch Timing Belts
HTD Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Belts - Timing - 14.000mm Pitch - HTD - 55mm Wide

Search Rating: 50%
Also see combined categories:
All 14mm Pitch Timing Belts
HTD Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Belts - Timing - 14.000mm Pitch - HTD - 85mm Wide

Search Rating: 50%
Also see combined categories:
All 14mm Pitch Timing Belts
HTD Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Belts Timing HTD 3mm
TopHide PicturesBelts - Timing - 3.000mm Pitch - HTD - 15mm Wide

Search Rating: 50%
Also see combined categories:
All 3mm Pitch Timing Belts
HTD Series Metric Timing Belts.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.
Belts - Timing - 3.000mm Pitch - HTD - 6mm Wide

Search Rating: 50%
Also see combined categories:
All 3mm Pitch Timing Belts
HTD Series Metric Timing Belts.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.
Belts - Timing - 3.000mm Pitch - HTD - 9mm Wide

Search Rating: 50%
Also see combined categories:
All 3mm Pitch Timing Belts
HTD Series Metric Timing Belts.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.
Belts - Timing - 3.000mm Pitch - HTD Double Sided - 6mm Wide

Search Rating: 50%
Also see combined categories:
All 3mm Pitch Timing Belts
HTD Series Metric Timing Belts Double Sided.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.
Belts - Timing - 3.000mm Pitch - HTD Double Sided - 9mm Wide

Search Rating: 50%
Also see combined categories:
All 3mm Pitch Timing Belts
HTD Series Metric Timing Belts.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.
Belts Timing HTD 5mm
TopHide PicturesBelts - Timing - 5.000mm Pitch - HTD - 15mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
HTD Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.
Belts - Timing - 5.000mm Pitch - HTD - 25mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
HTD Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.
Belts - Timing - 5.000mm Pitch - HTD - 6mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
HTD Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.
Belts - Timing - 5.000mm Pitch - HTD - 9mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
HTD Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.
If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Belts - Timing - 5.000mm Pitch - HTD - 9mm Wide.
Belts - Timing - 5.000mm Pitch - HTD Double Sided - 15mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
HTD Series Metric Timing Belts Double Sided.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 5.30mm. Breaking strength is not indicative of working strength.
Belts - Timing - 5.000mm Pitch - HTD Double Sided - 6mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
HTD Series Metric Timing Belts Double Sided.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 5.30mm. Breaking strength is not indicative of working strength.
Belts - Timing - 5.000mm Pitch - HTD Double Sided - 9mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
HTD Series Metric Timing Belts Double Sided.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 5.30mm. Breaking strength is not indicative of working strength.
Belts Timing HTD 8mm
TopHide PicturesBelts - Timing - 8.000mm Pitch - HTD - 20mm Wide

Search Rating: 50%
Also see combined categories:
All 8mm Pitch Timing Belts
HTD Series Metric Timing Belts
Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.
Belts - Timing - 8.000mm Pitch - HTD - 30mm Wide

Search Rating: 50%
Also see combined categories:
All 8mm Pitch Timing Belts
HTD Series Metric Timing Belts
Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.
Belts - Timing - 8.000mm Pitch - HTD - 50mm Wide

Search Rating: 50%
Also see combined categories:
All 8mm Pitch Timing Belts
HTD Series Metric Timing Belts
Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.
Belts - Timing - 8.000mm Pitch - HTD - 85mm Wide

Search Rating: 50%
Also see combined categories:
All 8mm Pitch Timing Belts
HTD Series Metric Timing Belts
Pitch (P) - 8.000mm. Breaking strength is not indicative of working strength.
Belts Timing L Pitch 9.53mm
TopHide PicturesBelts - Timing - 9.525mm Pitch - L - 19.1mm Wide

Search Rating: 50%
Also see combined categories:
All L 9.525mm Pitch Timing Belts
Standard Series Timing Belts 9.525mm or 0.375 inch pitch.
Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.
Belts - Timing - 9.525mm Pitch - L - 25.4mm Wide

Search Rating: 50%
Also see combined categories:
All L 9.525mm Pitch Timing Belts
Standard Series Timing Belts 9.525mm or 0.375 inch pitch.
Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.
Belts - Timing - 9.525mm Pitch - L Double Sided - 19.1mm Wide

Search Rating: 50%
Also see combined categories:
All L 9.525mm Pitch Timing Belts
Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.
Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.
Belts Timing MXL Pitch
TopHide PicturesBelts - Timing - 2.032mm Pitch - MXL - 3.2mm Wide

Search Rating: 50%
Also see combined categories:
All MXL 2.032mm Pitch Timing Belts
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 3.18mm (1/8 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL - 4.8mm Wide

Search Rating: 50%
Also see combined categories:
All MXL 2.032mm Pitch Timing Belts
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 4.76mm (3/16 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL - 6.4mm Wide

Search Rating: 50%
Also see combined categories:
All MXL 2.032mm Pitch Timing Belts
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 6.35mm (1/4 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL - 7.9mm Wide

Search Rating: 50%
Also see combined categories:
All MXL 2.032mm Pitch Timing Belts
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 7.93mm (5/16 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL - 9.5mm Wide

Search Rating: 50%
Also see combined categories:
All MXL 2.032mm Pitch Timing Belts
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 9.53mm (3/8 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL - Clean - 3.2mm Wide

Search Rating: 50%
Also see combined categories:
All MXL 2.032mm Pitch Timing Belts
PowerGrip(R) TruMotion(R) Timing Belts in 2.032mm or 0.080 inch pitch.
The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oC to +90oC, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. TruMotion(R) belts have a durable wear surface for longer life and are RoHS compliant. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. RoHs comliant.
Other Store Pages
Click Page Banner Below
TopMain Pages
Click Page Banner Below
TopTop