Belts timing 2.500mm pitch t2.5 8mm wide categories

Belts Timing T2.5 2.5mm

Belts - Metric Timing - 2.500mm Pitch T2.5 - 8mm Wide

Belts - Metric Timing - 2.500mm Pitch T2.5 - 8mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

All 2.5mm T2.5 Pulleys - Choose width carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 2.500mm Pitch T2.5 - 10mm Wide

Belts - Metric Timing - 2.500mm Pitch T2.5 - 10mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

All 2.5mm T2.5 Pulleys - Choose width carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 2.500mm Pitch T2.5 - 12mm Wide

Belts - Metric Timing - 2.500mm Pitch T2.5 - 12mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

All 2.5mm T2.5 Pulleys - Choose width carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 2.500mm Pitch T2.5 - 4mm Wide

Belts - Metric Timing - 2.500mm Pitch T2.5 - 4mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

All 2.5mm T2.5 Pulleys - Choose width carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 2.500mm Pitch T2.5 - 6mm Wide

Belts - Metric Timing - 2.500mm Pitch T2.5 - 6mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

All 2.5mm T2.5 Pulleys - Choose width carefully

Timing Belts Catalogue PDF

Pulleys Timing T2.5 2.5mm

Pulleys - Timing 2.500mm Pitch T2.5 - 6mm Wide - Through Bore

Pulleys - Timing 2.500mm Pitch T2.5 - 6mm Wide - Through Bore

Also see combined categories:
All 2.5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 2.500mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

Aluminium Alloy. Finished through bore ready to assemble. Set screw locking. This category may be available in the new MBA online store at Pulleys - Timing 2.500mm Pitch T2.5 - 6mm Wide - Through Bore.

Related Information:

Belts to suit 2.500 Pitch T Pulleys - 6mm wide

Timing Pulleys Catalogue PDF

Pulleys - Timing Stock 2.500mm Pitch T2.5 - Aluminium

Pulleys - Timing Stock 2.500mm Pitch T2.5 - Aluminium

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 2.500mm Pitch T2.5 - Aluminium.

Related Information:

Belts to suit 2.500 Pitch T Pulleys

Flanges to suit T2.5 series pulley stock

Timing Pulleys Catalogue PDF

You may also be interested in

Pulleys Flanges

Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium

Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium.

Related Information:

Aluminium Timing Pulley Stock

Belts - Metric Timing - 5.000mm Pitch AT5 - 8mm Wide

Belts - Metric Timing - 5.000mm Pitch AT5 - 8mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

Timing Belts Catalogue PDF

Belts - Metric Timing - 5.000mm Pitch - T5 - 8mm Wide

Belts - Metric Timing - 5.000mm Pitch - T5 - 8mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:

All 5mm Pitch Pulleys - Choose width and pitch style carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch GT - 12mm Wide

Belts - Metric Timing - 8.000mm Pitch GT - 12mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:

All 8mm Pitch Timing Pulleys - Choose width and pitch style carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch GT - 20mm Wide

Belts - Metric Timing - 8.000mm Pitch GT - 20mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:

All 8mm Pitch Timing Pulleys - Choose width and pitch style carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch GT - 30mm Wide

Belts - Metric Timing - 8.000mm Pitch GT - 30mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:

All 8mm Pitch Timing Pulleys - Choose width and pitch style carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch GT - 50mm Wide

Belts - Metric Timing - 8.000mm Pitch GT - 50mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:

All 8mm Pitch Timing Pulleys - Choose width and pitch style carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch GT - 85mm Wide

Belts - Metric Timing - 8.000mm Pitch GT - 85mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:

All 8mm Pitch Timing Pulleys - Choose width and pitch style carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch HTD - 20mm Wide

Belts - Metric Timing - 8.000mm Pitch HTD - 20mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

HTD Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 8.000mm.

Related Information:

All 8mm Pitch Timing Pulleys - Choose width and pitch style carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch HTD - 25mm Wide

Belts - Metric Timing - 8.000mm Pitch HTD - 25mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

HTD Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 8.000mm.

Related Information:

All 8mm Pitch Timing Pulleys - Choose width and pitch style carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch HTD - 30mm Wide

Belts - Metric Timing - 8.000mm Pitch HTD - 30mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

HTD Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 8.000mm.

Related Information:

All 8mm Pitch Timing Pulleys - Choose width and pitch style carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch HTD - 40mm Wide

Belts - Metric Timing - 8.000mm Pitch HTD - 40mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

HTD Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 8.000mm.

Related Information:

All 8mm Pitch Timing Pulleys - Choose width and pitch style carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch HTD - 50mm Wide

Belts - Metric Timing - 8.000mm Pitch HTD - 50mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

HTD Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 8.000mm.

Related Information:

All 8mm Pitch Timing Pulleys - Choose width and pitch style carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch HTD - 85mm Wide

Belts - Metric Timing - 8.000mm Pitch HTD - 85mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

HTD Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 8.000mm.

Related Information:

All 8mm Pitch Timing Pulleys - Choose width and pitch style carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch S8M - 15mm Wide

Belts - Metric Timing - 8.000mm Pitch S8M - 15mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

S8M Series Timing Belts

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.

Related Information:

Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch S8M - 25mm Wide

Belts - Metric Timing - 8.000mm Pitch S8M - 25mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

S8M Series Timing Belts

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.

Related Information:

Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch S8M - 30mm Wide

Belts - Metric Timing - 8.000mm Pitch S8M - 30mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

S8M Series Timing Belts

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.

Related Information:

Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch S8M - 40mm Wide

Belts - Metric Timing - 8.000mm Pitch S8M - 40mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

S8M Series Timing Belts

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.

Related Information:

Timing Belts Catalogue PDF

Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Taperlock

Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 12.0mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Taperlock.

Related Information:

Belts to suit 8.000 Pitch HTD Pulleys - 20mm wide

Taperlock Bushings

Timing Pulleys Catalogue PDF

Pulleys - Timing 8.000mm Pitch GT - 20mm Wide - Taperlock

Pulleys - Timing 8.000mm Pitch GT - 20mm Wide - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 20mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 20mm Wide - Taperlock.

Related Information:

Belts to suit 8.000 Pitch HTD Pulleys - 20mm wide

Taperlock Bushings

Timing Pulleys Catalogue PDF

Pulleys - Timing 8.000mm Pitch GT - 30mm Wide - Taperlock

Pulleys - Timing 8.000mm Pitch GT - 30mm Wide - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 30mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 30mm Wide - Taperlock.

Related Information:

Belts to suit 8.000 Pitch HTD Pulleys - 20mm wide

Taperlock Bushings

Timing Pulleys Catalogue PDF

Pulleys - Timing 8.000mm Pitch GT - 50mm Wide - Taperlock

Pulleys - Timing 8.000mm Pitch GT - 50mm Wide - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 50mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 50mm Wide - Taperlock.

Related Information:

Belts to suit 8.000 Pitch HTD Pulleys - 20mm wide

Taperlock Bushings

Timing Pulleys Catalogue PDF

Pulleys - Timing 8.000mm Pitch GT - 85mm Wide - Taperlock

Pulleys - Timing 8.000mm Pitch GT - 85mm Wide - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 85mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 85mm Wide - Taperlock.

Related Information:

Belts to suit 8.000 Pitch HTD Pulleys - 20mm wide

Taperlock Bushings

Timing Pulleys Catalogue PDF

Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Through Bore

Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Through Bore

Also see combined categories:
All 8mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 12.0mm wide. Pilot bored. Use with GT2 or GT3 type belts.

Black oxide coated steel. No locking. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Through Bore.

Related Information:

Belts to suit 8.000 Pitch HTD Pulleys - 20mm wide

Taperlock Bushings

Timing Pulleys Catalogue PDF

Pulleys - Timing 8.000mm Pitch GT - 50mm Wide - Through Bore

Pulleys - Timing 8.000mm Pitch GT - 50mm Wide - Through Bore

Also see combined categories:
All 8mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 50mm wide. Use with GT2 or GT3 type belts.

Black oxide coated steel. No locking. Unfinished types requires drilling and tapping. Bore requires machining to finished size. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 50mm Wide - Through Bore.

Related Information:

Belts to suit 8.000 Pitch HTD Pulleys - 20mm wide

Taperlock Bushings

Timing Pulleys Catalogue PDF

Belts - Inch Timing - 2.073mm Pitch 40DP - 4.8mm Wide

Belts - Inch Timing - 2.073mm Pitch 40DP - 4.8mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

All 2.073mm 40DP Pitch Pulleys - Choose width carefully

Timing Belts Catalogue PDF

Belts - Inch Timing - 12.700mm Pitch - H - 50.8mm Wide

Belts - Inch Timing - 12.700mm Pitch - H - 50.8mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. This category may be available in the new MBA online store at Belts - Inch Timing - 12.700mm Pitch - H - 50.8mm Wide.

Related Information:

All 12.7mm H Pitch Through Bore Timing Pulleys - Choose width carefully

All 12.7mm H Pitch Taperlock Timing Pulleys - Choose width carefully

Timing Belts Catalogue PDF

Belts - Inch Timing - 2.032mm Pitch MXL - 4.8mm Wide

Belts - Inch Timing - 2.032mm Pitch MXL - 4.8mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 4.76mm (3/16 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:

All 2.032mm MXL Pitch Pulleys - Choose width carefully

Timing Belts Catalogue PDF

Belts - Inch Timing - 5.080mm Pitch XL - 12.7mm Wide

Belts - Inch Timing - 5.080mm Pitch XL - 12.7mm Wide

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch. 12mm or 12.7mm width.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

All 5.08mm XL Pitch Timing Pulleys - Choose width carefully

Timing Belts Catalogue PDF

Belts - Inch Timing - 5.080mm Pitch XL - 7.9mm Wide

Belts - Inch Timing - 5.080mm Pitch XL - 7.9mm Wide

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

All 5.08mm XL Pitch Timing Pulleys - Choose width carefully

Timing Belts Catalogue PDF

Pulleys - Timing 12.700mm Pitch H - 50.8mm Wide - Taperlock

Pulleys - Timing 12.700mm Pitch H - 50.8mm Wide - Taperlock

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Belt width 50.8mm. Taperlock bush required for bore.

Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 12.700mm Pitch H - 50.8mm Wide - Taperlock.

Related Information:

Belts to suit 12.700 Pitch H Pulleys

Taperlock Bushings

Timing Pulleys Catalogue PDF

Belts - Inch Timing - 5.080mm Pitch XL - 6.4mm Wide - Double Sided

Belts - Inch Timing - 5.080mm Pitch XL - 6.4mm Wide - Double Sided

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

All 5.08mm XL Pitch Timing Pulleys - Choose width carefully

Timing Belts Catalogue PDF

Belts - Inch Timing - 5.080mm Pitch XL - 6.4mm Wide - Single Sided

Belts - Inch Timing - 5.080mm Pitch XL - 6.4mm Wide - Single Sided

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

All 5.08mm XL Pitch Timing Pulleys - Choose width carefully

Timing Belts Catalogue PDF

Belts - Inch Timing - 5.080mm Pitch XL - 9.5mm Wide - Double Sided

Belts - Inch Timing - 5.080mm Pitch XL - 9.5mm Wide - Double Sided

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

All 5.08mm XL Pitch Timing Pulleys - Choose width carefully

Timing Belts Catalogue PDF

Belts - Inch Timing - 5.080mm Pitch XL - 9.5mm Wide - Single Sided

Belts - Inch Timing - 5.080mm Pitch XL - 9.5mm Wide - Single Sided

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

All 5.08mm XL Pitch Timing Pulleys - Choose width carefully

Timing Belts Catalogue PDF

Pulleys - Timing 2.073mm Pitch 40DP - 4.8mm Wide - Through Bore

Pulleys - Timing 2.073mm Pitch 40DP - 4.8mm Wide - Through Bore

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 4.7 to 4.8mm wide. Also known as LT.

Aluminium Alloy. Finished Through Bore Ready To Assemble. This category may be available in the new MBA online store at Pulleys - Timing 2.073mm Pitch 40DP - 4.8mm Wide - Through Bore.

Related Information:

Belts to suit 2.073 Pitch 40DP Pulleys - 4.5mm wide

Timing Pulleys Catalogue PDF

Belts - Inch Timing - 2.073mm Pitch 40DP - 3.2mm Wide

Belts - Inch Timing - 2.073mm Pitch 40DP - 3.2mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

All 2.073mm 40DP Pitch Pulleys - Choose width carefully

Timing Belts Catalogue PDF

Belts - Inch Timing - 2.073mm Pitch 40DP - 6.4mm Wide

Belts - Inch Timing - 2.073mm Pitch 40DP - 6.4mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

All 2.073mm 40DP Pitch Pulleys - Choose width carefully

Timing Belts Catalogue PDF

Belts - Inch Timing - 2.073mm Pitch 40DP - 7.9mm Wide

Belts - Inch Timing - 2.073mm Pitch 40DP - 7.9mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

All 2.073mm 40DP Pitch Pulleys - Choose width carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 10.000mm Pitch - AT10 - 10mm Wide

Belts - Metric Timing - 10.000mm Pitch - AT10 - 10mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 10.000mm Pitch - AT10 - 12mm Wide

Belts - Metric Timing - 10.000mm Pitch - AT10 - 12mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 10.000mm Pitch - AT10 - 16mm Wide

Belts - Metric Timing - 10.000mm Pitch - AT10 - 16mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully

Timing Belts Catalogue PDF

Belts - Metric Timing - 10.000mm Pitch - AT10 - 20mm Wide

Belts - Metric Timing - 10.000mm Pitch - AT10 - 20mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully

Timing Belts Catalogue PDF

Main Pages

About Us

Acetal Bearings PDF

Acetal Bearings PDF

ADR and SKF PDF

ADR and SKF PDF

Anderton Circlips Cross Reference PDF

Anderton Circlips Cross Reference PDF

Ball Lock Pins PDF

Ball Lock Pins PDF

Balls List

Balls PDF

Barden Bearings Cross Reference PDF

Barden Bearings Cross Reference PDF

Bearings List

Brands

Ceramic Bearings PDF

Ceramic Bearings PDF

Circlips PDF

Clearance Items List

Clearance Items List

Clevis Pins PDF

Clevis Pins PDF

Contact Us

Corrosion Resistant Bearings PDF

Corrosion Resistant Bearings PDF

Dental Bearings

Dental Bearings

Disc Springs PDF

Disc Springs PDF

Dowel Pins PDF

Dowel Pins

Economy Bearings PDF

Economy Bearings PDF

Essentra Cross Reference PDF

Essentra Cross Reference PDF

Flocast Cross Reference PDF

Flocast Cross Reference PDF

Freight Rates and Shipping Times

Freight Rates and Shipping Times

Frequently Asked Questions

Frequently Asked Questions

General Information about MBA

General Information about MBA

Hammer Drive Pins PDF

Hammer Drive Pins PDF

High Speed Bearings PDF

High Speed Bearings PDF

Hobby Clearance

Hobby Clearance

Hobby Information

Hobby Information

K&S Metals Cross Reference PDF

K&S Metals Cross Reference PDF

Key Steel PDF

Knobs PDF

Large Bearings

Leveling Mounts PDF

Leveling Mounts PDF

Mailorder Form

Metallic Bushes PDF

Metallic Bushes PDF

Miniature Precison Bearings Cross Reference PDF

Miniature Precison Bearings Cross Reference PDF

Miscellaneous Brands Cross Reference PDF

Miscellaneous Brands Cross Reference PDF

Nordex Cross Reference PDF

Nordex Cross Reference PDF

NSK and NTN Cross Reference PDF

NSK and NTN Cross Reference PDF

Ondrives Cross Reference PDF

Ondrives Cross Reference PDF

O-Rings PDF

Pins PDF

Plastic Bearings PDF

Plastic Bearings PDF

Polyvee Belts and Pulleys PDF

Polyvee Belts and Pulleys PDF

Precision Shim Washers PDF

Precision Shim Washers PDF

Privacy

Push On and Push In Rings PDF

Push On and Push In Rings PDF

Reid Supply Cross Reference PDF

Reid Supply Cross Reference PDF

Rod & Tube PDF

Roll Pins PDF

Screws PDF

SDP-SI Designatronics Cross Reference PDF

SDP-SI Designatronics Cross Reference PDF

Seeger Circlips Cross Reference PDF

Seeger Circlips Cross Reference PDF

Shaft Collars PDF

Shaft Collars PDF

Shim Sheet PDF

Shoulder Screws PDF

Shoulder Screws PDF

Sintered Bronze Bushes PDF

Sintered Bronze Bushes PDF

Sintered Bronze Cross Reference PDF

Sintered Bronze Cross Reference PDF

Small Bearings

Small Parts Inc Cross Reference PDF

Small Parts Inc Cross Reference PDF

Snap Rings PDF

Socket Set Screws PDF

Socket Set Screws PDF

Solid Bronze Bushes PDF

Solid Bronze Bushes PDF

Spring Steel Strip PDF

Spring Steel Strip PDF

Springs PDF

Standard Ball Bearing Range PDF

Standard Ball Bearing Range PDF

Super Precision Bearings PDF

Super Precision Bearings PDF

Taper Pins PDF

Technical Information

Technical Information

Terms

Thrust Bearings PDF

Thrust Bearings PDF

Thumb Screws and Nuts PDF

Thumb Screws and Nuts PDF

Timing Belts and Pulleys Cross Reference PDF

Timing Belts and Pulleys Cross Reference PDF

Timing Belts PDF

Timing Belts PDF

Timing Pulley Stock PDF

Timing Pulley Stock PDF

Timing Pulleys PDF

Timing Pulleys PDF

Vibration Mounts PDF

Vibration Mounts PDF

Washers and Spacers PDF

Washers and Spacers PDF

Wave Washers PDF

Wave Washers PDF

Domains

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 153564 products in 2094 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 153564 products in 2094 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.