Small Parts & Bearings - an MBA company

Belts timing 1.000mm pitch t01m 3mm wide categories


Belts Timing T01 1mm


Belts - Timing - 1.000mm Pitch - T01M - 3mm Wide
Belts - Timing -  1.000mm Pitch - T01M - 3mm Wide

Also see combined categories:
All 1mm Pitch Timing Belts

Miniature 1mm series timing belts. 3mm Wide +/- 0.2mm

Pitch (P) - 1.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.41mm. Belt Height (W) - 0.97mm. Breaking strength is not indicative of working strength.

Related Information:


You may also be interested in

Pulleys Timing T01 1mm


Pulleys - Timing - 1.000mm Pitch - 3mm Wide - Through Bore
Pulleys - Timing -  1.000mm Pitch - 3mm Wide - Through Bore

Also see combined categories:
All 1mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 1mm Pitch Timing Belts.

Aluminium Alloy. With set screw.

Related Information:


Pulleys - Timing - 1.000mm Pitch - 6mm Wide - Through Bore
Pulleys - Timing -  1.000mm Pitch - 6mm Wide - Through Bore

Also see combined categories:
All 1mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 1mm Pitch Timing Belts.

Aluminium Alloy. With set screw.

Related Information:


Belts - Timing - 2.000mm Pitch - GT2 - 3mm Wide
Belts - Timing -  2.000mm Pitch - GT2 -  3mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - GT2 - 15mm Wide
Belts - Timing -  3.000mm Pitch - GT2 - 15mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - GT2 - 6mm Wide
Belts - Timing -  3.000mm Pitch - GT2 -  6mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - GT2 - 9mm Wide
Belts - Timing -  3.000mm Pitch - GT2 -  9mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - HTD - 15mm Wide
Belts - Timing -  3.000mm Pitch - HTD - 15mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - HTD - 6mm Wide
Belts - Timing -  3.000mm Pitch - HTD -  6mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - HTD - 9mm Wide
Belts - Timing -  3.000mm Pitch - HTD -  9mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - GT2 - Double Sided - 15mm Wide
Belts - Timing -  3.000mm Pitch - GT2 - Double Sided - 15mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - GT2 - Double Sided - 6mm Wide
Belts - Timing -  3.000mm Pitch - GT2 - Double Sided -  6mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts Double Sided

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - GT2 - Double Sided - 9mm Wide
Belts - Timing -  3.000mm Pitch - GT2 - Double Sided -  9mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts Double Sided

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - HTD Double Sided - 6mm Wide
Belts - Timing -  3.000mm Pitch - HTD Double Sided -  6mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

HTD Series Metric Timing Belts Double Sided.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - HTD Double Sided - 9mm Wide
Belts - Timing -  3.000mm Pitch - HTD Double Sided -  9mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:


Pulleys - Timing - 2.000mm Pitch - GT2 - 3mm Wide - Through Bore
Pulleys - Timing -  2.000mm Pitch - GT2 - 3mm Wide - Through Bore

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 2mm Pitch Timing Belts.

Aluminium Alloy. Finished Bores with Set Screws.

Related Information:


Pulleys - Timing - 3.000mm Pitch - GT2 - 15mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - GT2 - 15mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 15mm Wide.

Aluminium Alloy. Finsihed through bore. Set screw locking.

Related Information:


Pulleys - Timing - 3.000mm Pitch - GT2 - 6mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - GT2 -  6mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 6mm Wide.

Aluminium Alloy. Finished through bore ready to assemble.

Related Information:


Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - EZ-Lock
Pulleys - Timing -  3.000mm Pitch - GT2 -  9mm Wide - EZ-Lock

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide.

Aluminium Alloy. EZ-Lock hub clamps to the shaft with a socket head cap screw. Cap screw is supplied with the pulley.

Related Information:


Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - Plastic - Insert
Pulleys - Timing -  3.000mm Pitch - GT2 -  9mm Wide - Plastic - Insert

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Brass insert.


Related Information:




Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - GT2 -  9mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide.

Finished through bore ready for assembly. Set screw locking.

Related Information:


Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - EZ-Lock
Pulleys - Timing -  3.000mm Pitch - HTD - 6mm Wide - EZ-Lock

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.


Related Information:


Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - HTD - 6mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

Aluminium alloy. Finished through bore ready to assemble. Set screw locking.

Related Information:


Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless
Pulleys - Timing -  3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Moulded single or double flange. No hub.

Suitable for use with shaftloc sleeves.

Related Information:


Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Insert
Pulleys - Timing -  3.000mm Pitch - HTD - 9mm Wide - Plastic - Insert

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Brass insert.


Related Information:


Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - HTD - 9mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.

Aluminium alloy. Finished through bore ready to assemble. Set screw locking.

Related Information:


Belts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 3.2mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 4.8mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 6.4mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 7.9mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 9.525mm Pitch - L - 12.7mm Wide
Belts - Timing -  9.525mm Pitch - L -  12.7mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 9.525mm Pitch - L - 19.1mm Wide
Belts - Timing -  9.525mm Pitch - L -  19.1mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 9.525mm Pitch - L - 25.4mm Wide
Belts - Timing -  9.525mm Pitch - L -  25.4mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 9.525mm Pitch - L Double Sided - 12.7mm Wide
Belts - Timing -  9.525mm Pitch - L Double Sided - 12.7mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 9.525mm Pitch - L Double Sided - 19.1mm Wide
Belts - Timing -  9.525mm Pitch - L Double Sided - 19.1mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 9.525mm Pitch - L Double Sided - 25.4mm Wide
Belts - Timing -  9.525mm Pitch - L Double Sided - 25.4mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.

Related Information:


Pulleys - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide - Through Bore
Pulleys - Timing -  2.073mm Pitch - 40DP - 4.8mm Wide - Through Bore

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 4.7 to 4.8mm wide. Also known as LT.

Aluminium Alloy. Finished Through Bore Ready To Assemble.

Related Information:


Pulleys - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain
Pulleys - Timing -  2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Also known as LT. Moulded single or double flange. No locking device.


Related Information:


Pulleys - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide - Through Bore
Pulleys - Timing -  2.073mm Pitch - 40DP - 7.9mm Wide - Through Bore

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 7.9 to 8.0mm wide. Also known as LT.

Aluminium Alloy. Finished Through Bore Ready To Assemble.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 5.000mm Pitch - AT5 - 10mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 10mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 5.000mm Pitch - AT5 - 12mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 12mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.

Related Information:


Belts - Timing - 5.000mm Pitch - AT5 - 16mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 16mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.

Related Information:


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124481 products in 2754 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124481 products in 2754 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.