International currencies? Visit the New MBA Store
Small Parts & Bearings - an MBA company

Belts inch timing 2.073mm pitch 40dp 3.2mm wide categories

Belts Timing 40DP LT Pitch


Belts - Inch Timing - 2.073mm Pitch 40DP - 3.2mm Wide
Belts - Inch Timing - 2.073mm Pitch 40DP - 3.2mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:
All 2.073mm 40DP Pitch Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Inch Timing - 2.073mm Pitch 40DP - 4.8mm Wide
Belts - Inch Timing - 2.073mm Pitch 40DP - 4.8mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:
All 2.073mm 40DP Pitch Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Inch Timing - 2.073mm Pitch 40DP - 6.4mm Wide
Belts - Inch Timing - 2.073mm Pitch 40DP - 6.4mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:
All 2.073mm 40DP Pitch Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Inch Timing - 2.073mm Pitch 40DP - 7.9mm Wide
Belts - Inch Timing - 2.073mm Pitch 40DP - 7.9mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:
All 2.073mm 40DP Pitch Pulleys - Choose width carefully
Timing Belts Catalogue PDF

You may also be interested in

Pulleys Timing 40DP LT Pitch


Pulleys - Timing 2.073mm Pitch 40DP - 4.8mm Wide - Through Bore
Pulleys - Timing 2.073mm Pitch 40DP - 4.8mm Wide - Through Bore

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 4.7 to 4.8mm wide. Also known as LT.

Aluminium Alloy. Finished Through Bore Ready To Assemble. This category may be available in the new MBA online store at Pulleys - Timing 2.073mm Pitch 40DP - 4.8mm Wide - Through Bore.

Related Information:
Belts to suit 2.073 Pitch 40DP Pulleys - 4.5mm wide
Timing Pulleys Catalogue PDF

Pulleys - Timing 2.073mm Pitch 40DP - 6.4mm Wide - Plastic - Plain
Pulleys - Timing 2.073mm Pitch 40DP - 6.4mm Wide - Plastic - Plain

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Also known as LT. Moulded single or double flange. No locking device.

This category may be available in the new MBA online store at Pulleys - Timing 2.073mm Pitch 40DP - 6.4mm Wide - Plastic - Plain.

Related Information:
Belts to suit 2.073 Pitch 40DP Pulleys - 6mm wide
Timing Pulleys Catalogue PDF

Pulleys - Timing 2.073mm Pitch 40DP - 7.9mm Wide - Through Bore
Pulleys - Timing 2.073mm Pitch 40DP - 7.9mm Wide - Through Bore

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 7.9 to 8.0mm wide. Also known as LT.

Aluminium Alloy. Finished Through Bore Ready To Assemble. This category may be available in the new MBA online store at Pulleys - Timing 2.073mm Pitch 40DP - 7.9mm Wide - Through Bore.

Related Information:
Belts to suit 2.073 Pitch 40DP Pulleys - 8mm wide
Timing Pulleys Catalogue PDF

Pulleys - Timing Stock 2.073mm Pitch 40DP - Aluminium
Pulleys - Timing Stock 2.073mm Pitch 40DP - Aluminium


For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Also known as LT.

This category may be available in the new MBA online store at Pulleys - Timing Stock 2.073mm Pitch 40DP - Aluminium.

Related Information:
Belts to suit 2.073 Pitch 40DP Pulleys
Flanges to suit 40 DP series pulley stock
Timing Pulleys Catalogue PDF

Belts Timing MXL Pitch


Belts - Inch Timing - 2.032mm Pitch MXL - 3.2mm Wide - Clean
Belts - Inch Timing - 2.032mm Pitch MXL - 3.2mm Wide - Clean

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

PowerGrip(R) TruMotion(R) Timing Belts in 2.032mm or 0.080 inch pitch.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oC to +90oC, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. TruMotion(R) belts have a durable wear surface for longer life and are RoHS compliant. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. RoHs compliant.

Related Information:
All 2.032mm MXL Pitch Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Inch Timing - 2.032mm Pitch MXL - 3.2mm Wide - Standard
Belts - Inch Timing - 2.032mm Pitch MXL - 3.2mm Wide - Standard

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 3.18mm (1/8 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:
All 2.032mm MXL Pitch Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Pulleys Timing MXL Pitch


Pulleys - Timing 2.032mm Pitch MXL - 3.2mm Wide - Through Bore
Pulleys - Timing 2.032mm Pitch MXL - 3.2mm Wide - Through Bore

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 3.0 to 3.2mm wide.

2.032mm metric is equivalent to 0.080 pitch imperial. This category may be available in the new MBA online store at Pulleys - Timing 2.032mm Pitch MXL - 3.2mm Wide - Through Bore.

Related Information:
Belts to suit 2.032 Pitch MXL Pulleys - 3.2mm wide
Double Sided Belts to suit 2.032 Pitch MXL Pulleys - 3.2mm wide
Tru-Motion Belts to suit 2.032 Pitch MXL Pulleys - 3mm Wide

Belts - Metric Timing - 10.000mm Pitch - AT10 - 10mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 10mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:
All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 10.000mm Pitch - AT10 - 12mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 12mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:
All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 10.000mm Pitch - AT10 - 16mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 16mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:
All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 10.000mm Pitch - AT10 - 20mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 20mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:
All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 10.000mm Pitch - AT10 - 25mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 25mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:
All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 10.000mm Pitch - AT10 - 32mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 32mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:
All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 10.000mm Pitch - AT10 - 50mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 50mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:
All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 5.000mm Pitch AT5 - 10mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 10mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 5.000mm Pitch AT5 - 12mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 12mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 5.000mm Pitch AT5 - 16mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 16mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 5.000mm Pitch AT5 - 20mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 20mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 5.000mm Pitch AT5 - 25mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 5.000mm Pitch AT5 - 6mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 6mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
Timing Belts Catalogue PDF

Belts - Metric Timing - 5.000mm Pitch AT5 - 8mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 8mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
Timing Belts Catalogue PDF

Belts - Metric Timing - 14.000mm Pitch GT - 115mm Wide
Belts - Metric Timing - 14.000mm Pitch GT - 115mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:
All 14mm Pitch Taperlock Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 14.000mm Pitch GT - 170mm Wide
Belts - Metric Timing - 14.000mm Pitch GT - 170mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:
All 14mm Pitch Taperlock Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 14.000mm Pitch GT - 40mm Wide
Belts - Metric Timing - 14.000mm Pitch GT - 40mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:
All 14mm Pitch Taperlock Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 14.000mm Pitch GT - 55mm Wide
Belts - Metric Timing - 14.000mm Pitch GT - 55mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:
All 14mm Pitch Taperlock Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 14.000mm Pitch GT - 85mm Wide
Belts - Metric Timing - 14.000mm Pitch GT - 85mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:
All 14mm Pitch Taperlock Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 2.000mm Pitch GT - 3mm Wide
Belts - Metric Timing - 2.000mm Pitch GT - 3mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:
All 2mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 2.000mm Pitch GT - 4mm Wide
Belts - Metric Timing - 2.000mm Pitch GT - 4mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:
All 2mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 2.000mm Pitch GT - 6mm Wide - Clean
Belts - Metric Timing - 2.000mm Pitch GT - 6mm Wide - Clean

Also see combined categories:
All 2mm Pitch Timing Belts

PowerGrip(R) TruMotion(R) Timing Belts in 2.000mm.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. GT3 will replace GT2 as stock is depleted. Pitch (P) - 2.00mm, Tooth Height (H) - 0.76mm, Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:
All 2mm Pitch Pulleys - Choose width and pitch style carefully
Pulleys stock - 2.000mm GT2 Pitch.
Timing Belts Catalogue PDF

Belts - Metric Timing - 2.000mm Pitch GT - 6mm Wide - Standard
Belts - Metric Timing - 2.000mm Pitch GT - 6mm Wide - Standard

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:
All 2mm Pitch Pulleys - Choose width and pitch style carefully
Pulleys stock - 2.000mm GT2 Pitch.
Timing Belts Catalogue PDF

Belts - Metric Timing - 2.000mm Pitch GT - 9mm Wide
Belts - Metric Timing - 2.000mm Pitch GT - 9mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:
All 2mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 3.000mm Pitch GT - 15mm Wide
Belts - Metric Timing - 3.000mm Pitch GT - 15mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.

Related Information:
All 3mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 3.000mm Pitch GT - 6mm Wide - Double Sided
Belts - Metric Timing - 3.000mm Pitch GT - 6mm Wide - Double Sided

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts Double Sided

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.

Related Information:
All 3mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 3.000mm Pitch GT - 6mm Wide - Single Sided
Belts - Metric Timing - 3.000mm Pitch GT - 6mm Wide - Single Sided

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.

Related Information:
All 3mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 3.000mm Pitch GT - 9mm Wide
Belts - Metric Timing - 3.000mm Pitch GT - 9mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.

Related Information:
All 3mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 5.000mm Pitch GT - 15mm Wide
Belts - Metric Timing - 5.000mm Pitch GT - 15mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 5.000mm Pitch GT - 25mm Wide
Belts - Metric Timing - 5.000mm Pitch GT - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. GT3 replaces GT2 as GT2 stock is depleted. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 5.000mm Pitch GT - 9mm Wide
Belts - Metric Timing - 5.000mm Pitch GT - 9mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch GT - 12mm Wide
Belts - Metric Timing - 8.000mm Pitch GT - 12mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:
All 8mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch GT - 20mm Wide
Belts - Metric Timing - 8.000mm Pitch GT - 20mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:
All 8mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch GT - 30mm Wide
Belts - Metric Timing - 8.000mm Pitch GT - 30mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:
All 8mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch GT - 50mm Wide
Belts - Metric Timing - 8.000mm Pitch GT - 50mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:
All 8mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Metric Timing - 8.000mm Pitch GT - 85mm Wide
Belts - Metric Timing - 8.000mm Pitch GT - 85mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:
All 8mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

Belts - Inch Timing - 12.700mm Pitch - H - 19.1mm Wide
Belts - Inch Timing - 12.700mm Pitch - H - 19.1mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. This category may be available in the new MBA online store at Belts - Inch Timing - 12.700mm Pitch - H - 19.1mm Wide.

Related Information:
All 12.7mm H Pitch Through Bore Timing Pulleys - Choose width carefully
All 12.7mm H Pitch Taperlock Timing Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Inch Timing - 12.700mm Pitch - H - 25.4mm Wide
Belts - Inch Timing - 12.700mm Pitch - H - 25.4mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. This category may be available in the new MBA online store at Belts - Inch Timing - 12.700mm Pitch - H - 25.4mm Wide.

Related Information:
All 12.7mm H Pitch Through Bore Timing Pulleys - Choose width carefully
All 12.7mm H Pitch Taperlock Timing Pulleys - Choose width carefully
Timing Belts Catalogue PDF

Belts - Inch Timing - 12.700mm Pitch - H - 38.1mm Wide
Belts - Inch Timing - 12.700mm Pitch - H - 38.1mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. This category may be available in the new MBA online store at Belts - Inch Timing - 12.700mm Pitch - H - 38.1mm Wide.

Related Information:
All 12.7mm H Pitch Through Bore Timing Pulleys - Choose width carefully
All 12.7mm H Pitch Taperlock Timing Pulleys - Choose width carefully
Timing Belts Catalogue PDF




Main Pages

About Us

About Us
 Acetal Bearings PDF

Acetal Bearings PDF
 ADR and SKF PDF

ADR and SKF PDF
 Anderton Circlips Cross Reference PDF

Anderton Circlips Cross Reference PDF
 Ball Lock Pins PDF

Ball Lock Pins PDF
 Balls List

Balls List
 Balls PDF

Balls PDF
 Barden Bearings Cross Reference PDF

Barden Bearings Cross Reference PDF
 Bearings List

Bearings List
 Brands

Brands
 Ceramic Bearings PDF

Ceramic Bearings PDF
 Circlips PDF

Circlips PDF
 Clearance Items List

Clearance Items List
 Clevis Pins PDF

Clevis Pins PDF
 Contact Us

Contact Us
 Corrosion Resistant Bearings PDF

Corrosion Resistant Bearings PDF
 Dental Bearings

Dental Bearings
 Disc Springs PDF

Disc Springs PDF
 Dowel Pins PDF

Dowel Pins PDF
 Dowel Pins

Dowel Pins
 Economy Bearings PDF

Economy Bearings PDF
 Essentra Cross Reference PDF

Essentra Cross Reference PDF
 Flocast Cross Reference PDF

Flocast Cross Reference PDF
 Freight Rates and Shipping Times

Freight Rates and Shipping Times
 Frequently Asked Questions

Frequently Asked Questions
 General Information about MBA

General Information about MBA
 Hammer Drive Pins PDF

Hammer Drive Pins PDF
 High Speed Bearings PDF

High Speed Bearings PDF
 Hobby Clearance

Hobby Clearance
 Hobby Information

Hobby Information
 K&S Metals Cross Reference PDF

K&S Metals Cross Reference PDF
 Key Steel PDF

Key Steel PDF
 Knobs PDF

Knobs PDF
 Large Bearings

Large Bearings
 Leveling Mounts PDF

Leveling Mounts PDF
 Mailorder Form

Mailorder Form
 Metallic Bushes PDF

Metallic Bushes PDF
 Miniature Precison Bearings Cross Reference PDF

Miniature Precison Bearings Cross Reference PDF
 Miscellaneous Brands Cross Reference PDF

Miscellaneous Brands Cross Reference PDF
 Nordex Cross Reference PDF

Nordex Cross Reference PDF
 NSK and NTN Cross Reference PDF

NSK and NTN Cross Reference PDF
 Ondrives Cross Reference PDF

Ondrives Cross Reference PDF
 O-Rings PDF

O-Rings PDF
 Pins PDF

Pins PDF
 Plastic Bearings PDF

Plastic Bearings PDF
 Polyvee Belts and Pulleys PDF

Polyvee Belts and Pulleys PDF
 Precision Shim Washers PDF

Precision Shim Washers PDF
 Privacy

Privacy
 Push On and Push In Rings PDF

Push On and Push In Rings PDF
 Reid Supply Cross Reference PDF

Reid Supply Cross Reference PDF
 Rod & Tube PDF

Rod & Tube PDF
 Roll Pins PDF

Roll Pins PDF
 Screws PDF

Screws PDF
 SDP-SI Designatronics Cross Reference PDF

SDP-SI Designatronics Cross Reference PDF
 Seeger Circlips Cross Reference PDF

Seeger Circlips Cross Reference PDF
 Shaft Collars PDF

Shaft Collars PDF
 Shim Sheet PDF

Shim Sheet PDF
 Shoulder Screws PDF

Shoulder Screws PDF
 Sintered Bronze Bushes PDF

Sintered Bronze Bushes PDF
 Sintered Bronze Cross Reference PDF

Sintered Bronze Cross Reference PDF
 Small Bearings

Small Bearings
 Small Parts Inc Cross Reference PDF

Small Parts Inc Cross Reference PDF
 Snap Rings PDF

Snap Rings PDF
 Socket Set Screws PDF

Socket Set Screws PDF
 Solid Bronze Bushes PDF

Solid Bronze Bushes PDF
 Spring Steel Strip PDF

Spring Steel Strip PDF
 Springs PDF

Springs PDF
 Standard Ball Bearing Range PDF

Standard Ball Bearing Range PDF
 Super Precision Bearings PDF

Super Precision Bearings PDF
 Taper Pins PDF

Taper Pins PDF
 Technical Information

Technical Information
 Terms

Terms
 Thrust Bearings PDF

Thrust Bearings PDF
 Thumb Screws and Nuts PDF

Thumb Screws and Nuts PDF
 Timing Belts and Pulleys Cross Reference PDF

Timing Belts and Pulleys Cross Reference PDF
 Timing Belts PDF

Timing Belts PDF
 Timing Pulley Stock PDF

Timing Pulley Stock PDF
 Timing Pulleys PDF

Timing Pulleys PDF
 Vibration Mounts PDF

Vibration Mounts PDF
 Washers and Spacers PDF

Washers and Spacers PDF
 Wave Washers PDF

Wave Washers PDF
 Domains

Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 153564 products in 2094 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

 
ADR and SKF PDF (Link) About Us Acetal Bearings PDF (Link) Anderton Circlips Cross Reference PDF (Link) Ball Lock Pins PDF (Link) Balls List Balls PDF (Link)
Paypal Accepted
Paypal
Secure Checkout
Barden Bearings Cross Reference PDF (Link) Bearings List Bearings and Balls Brands Ceramic Bearings PDF (Link) Circlips PDF (Link) Clamping and Locking Clearance Items List
Visa Card Accepted
Visa
Secure Checkout
Clevis Pins PDF (Link) Contact Us Control Products Corrosion Resistant Bearings PDF (Link) Dental Bearings Dental Disc Springs PDF (Link) Domains
Master Card Accepted
Mastercard
Secure Checkout
Dowel Pins PDF (Link) Dowel Pins Economy Bearings PDF (Link) Essentra Cross Reference PDF (Link) Fasteners Flocast Cross Reference PDF (Link) Freight Rates and Shipping Times (Link) Frequently Asked Questions
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Gears General Information about MBA (Link) Hammer Drive Pins PDF (Link) High Speed Bearings PDF (Link) Hobby Clearance (Link) Hobby Information K&S Metals Cross Reference PDF (Link) Key Steel PDF (Link)
Amex Accepted
Amex
Secure Checkout
Kits Knobs PDF (Link) Large Bearings (Link) Leveling Mounts PDF (Link) Linear Bearings and Systems Literature Magnets Mailorder Form (Link)
Paypal Accepted
Paypal
Secure Checkout
Materials Metallic Bushes PDF (Link) Miniature Precison Bearings Cross Reference PDF (Link) Miscellaneous Brands Cross Reference PDF (Link) Miscellaneous NSK and NTN Cross Reference PDF (Link) Nordex Cross Reference PDF (Link) O-Rings PDF (Link)
Visa Card Accepted
Visa
Secure Checkout
Ondrives Cross Reference PDF (Link) Packing and Display Pins PDF (Link) Plastic Bearings PDF (Link) Polyvee Belts and Pulleys PDF (Link) Power Transmission Precision Shim Washers PDF (Link) Privacy
Master Card Accepted
Mastercard
Secure Checkout
Push On and Push In Rings PDF (Link) Reid Supply Cross Reference PDF (Link) Rod & Tube PDF (Link) Roll Pins PDF (Link) SDP-SI Designatronics Cross Reference PDF (Link) Screws PDF (Link) Seals Seeger Circlips Cross Reference PDF (Link)
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Shaft Collars PDF (Link) Shaft Couplings Shafting Shim Sheet PDF (Link) Shoulder Screws PDF (Link) Sintered Bronze Bushes PDF (Link) Sintered Bronze Cross Reference PDF (Link) Small Bearings (Link)
Amex Accepted
Amex
Secure Checkout
Small Parts Inc Cross Reference PDF (Link) Snap Rings PDF (Link) Socket Set Screws PDF (Link) Solid Bronze Bushes PDF (Link) Spring Steel Strip PDF (Link) Springs PDF (Link) Springs and Retraction Standard Ball Bearing Range PDF (Link)
Paypal Accepted
Paypal
Secure Checkout
Storage Super Precision Bearings PDF (Link) Taper Pins PDF (Link) Technical Information Terms Thrust Bearings PDF (Link) Thumb Screws and Nuts PDF (Link) Timing Belts PDF (Link)
Visa Card Accepted
Visa
Secure Checkout
Timing Belts and Pulleys Cross Reference PDF (Link) Timing Belts and Pulleys Timing Pulley Stock PDF (Link) Timing Pulleys PDF (Link) Tools Vibration Control Vibration Mounts PDF (Link) Washers and Spacers PDF (Link)
Master Card Accepted
Mastercard
Secure Checkout
Wave Washers PDF (Link)

Products

Adjusters Allthread Angle Assortments Backup Rings Ball Joints Ball Parallels Ball Screw Accessories Ball Screws Ground
Paypal Accepted
Paypal
Secure Checkout
Ball Screws Nook Series Ball Screws Rolled Ball Splines Linear Ball Transfers Balls Ceramic Balls Metallic Balls Plastic Balls Rubber Bar and Rod Batteries
Visa Card Accepted
Visa
Secure Checkout
Bearings Angular Contact Bearings Ceramic Bearings Conveyor Bearings Double Row Ball Bearings Flanged Ball Bearings Grooved Profile Bearings Housings Bearings Mounted Bearings Needle Roller Bearings One Way Clutch
Master Card Accepted
Mastercard
Secure Checkout
Bearings Pivot Bearings Plastic Bearings Plates Bearings Single Row Ball Bearings Special Purpose Bearings Stainless Special Grades Bearings Tapered Roller Bearings Thrust Bearings and Housings Insert Bearings for Dental Equipment
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Bearings for Housings Bearings for Skating Belts Poly Vee Belts Posi-Drive Belts Rounthane Belts Timing 40DP LT Pitch Belts Timing AT10 10mm Belts Timing AT5 5mm Belts Timing GT2 -14mm Belts Timing GT2 2mm
Amex Accepted
Amex
Secure Checkout
Belts Timing GT2 3mm Belts Timing GT2 5mm Belts Timing GT2 8mm Belts Timing H Pitch 12.7mm Belts Timing HTD -14mm Belts Timing HTD 3mm Belts Timing HTD 5mm Belts Timing HTD 8mm Belts Timing L Pitch 9.53mm Belts Timing MXL Pitch
Paypal Accepted
Paypal
Secure Checkout
Belts Timing S2M 2mm Belts Timing S3M 3mm Belts Timing S5M 5mm Belts Timing S8M 8mm Belts Timing T01 1mm Belts Timing T015 1.5mm Belts Timing T10 10mm Belts Timing T2.5 2.5mm Belts Timing T5 5mm Belts Timing XL Pitch 5.08mm
Visa Card Accepted
Visa
Secure Checkout
Bumpers Bungs Bushes Bronze Bushes Plastic Bushes Steel Bushings Spherical Cable Ties Cable Cam Followers Castors Accessories
Master Card Accepted
Mastercard
Secure Checkout
Castors Plate Castors Stud Catalogues Catches Chain and Sprockets Ladder Chain and Sprockets Roller Channel Circlips Clamping Bushings Clamping Rings
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Clamps Clips Clutches Collars Couplings Geargrip Couplings Helical and Slit Couplings Insert and Jaw Couplings K Type Couplings Other Couplings Rigid
Amex Accepted
Amex
Secure Checkout
Cross Blocks Dampers Dual Vee Bearings Engineering and Hobby Rod Eyebolts Fastening Bushings Flexible Shaft Gas Springs Gear Blanks Gear Racks Flexible
Paypal Accepted
Paypal
Secure Checkout
Gearboxes Cross Axis Gearheads Inline Gearmotors Basic Gearmotors DC Gearmotors Open Gearmotors Permanent Magnet Gears Cluster Gears Inch Bevel Gears Inch Mitre Gears Inch Racks
Visa Card Accepted
Visa
Secure Checkout
Gears Inch Spur Gears Inch Worms Gears Metric Bevel Gears Metric Mitre Gears Metric Racks Gears Metric Spiral Mitre Gears Metric Spur Gears Metric Worms Handles
Master Card Accepted
Mastercard
Secure Checkout
Handpiece Parts Hobby Gears Hooks Housings for Ball Bearings Housings with Bearing Hubs Insulator Strips Insulators Isolators Keys and Keysteel
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Keys Knobs Ball Knobs Cabinet Knobs Cross Knobs Knurled Knobs Lever Knobs Lobe Knobs Mushroom Knobs Oval Knobs Pointer
Amex Accepted
Amex
Secure Checkout
Knobs Push Pull Knobs Round Knobs Star Knobs Thumb Knobs Tri Knobs Valve Knobs Wing Lanyards Latches Handle Latches Other
Paypal Accepted
Paypal
Secure Checkout
Latches Quarter Turn Lazy Susans Leads and Connectors Leadscrews Levers Linear Bearing Housings Linear Bearings with Housing Linear Bearings Linear Slides Locking Assemblies
Visa Card Accepted
Visa
Secure Checkout
Locking Bushings Magnets Alcomax Magnets Alnico Magnets Ceramic Magnets Cup Magnets Rare Earth Magnets Rubber and Vinyl Motors DC Motors Vibrating Mounts Base
Master Card Accepted
Mastercard
Secure Checkout
Mounts Bonded Mounts Conical Mounts Cup Mounts Cylindrical Mounts Leveling Mounts Machinery Mounts Plate Mounts Rectangular Mounts Wedge Nuts Dome
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Nuts Hex Nuts Lock for Bearings Nuts Lock Nuts Specialty Nuts Thumb Nuts Wing O-Rings for Dental Applications O-Rings Oil Seals Pillars
Amex Accepted
Amex
Secure Checkout
Pinion Wire Imperial Pins Ball Lock Pins Clevis Pins Cotter Pins Dowel Pins General Pins Locating Pins Pull Pins Roll Pins Taper
Paypal Accepted
Paypal
Secure Checkout
Pins Wirelock Plugs Plungers Ball Plungers Indexing Plungers Spring Positioning Pressure Rollers Protective Packing and Sleeves Pulleys Flanges Pulleys Grooved
Visa Card Accepted
Visa
Secure Checkout
Pulleys Idler Pulleys Poly Vee Pulleys Timing 40DP LT Pitch Pulleys Timing AT10 10mm Pulleys Timing AT5 5mm Pulleys Timing GT2 -14mm Pulleys Timing GT2 2mm Pulleys Timing GT2 3mm Pulleys Timing GT2 5mm Pulleys Timing GT2 8mm
Master Card Accepted
Mastercard
Secure Checkout
Pulleys Timing H Pitch 12.7mm Pulleys Timing HTD 3mm Pulleys Timing HTD 5mm Pulleys Timing HTD 8mm Pulleys Timing L Pitch 9.53mm Pulleys Timing MXL Pitch Pulleys Timing T01 1mm Pulleys Timing T10 10mm Pulleys Timing T2.5 2.5mm Pulleys Timing T5 5mm
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Pulleys Timing XL Pitch 5.08mm Pulleys Vee RC Car and Buggy Wheels Ratchets and Pawls Rod Ends PTFE Lined Rod Ends Plastic Rod Ends Stainless Steel Rod Ends Stamped Rod Ends Standard Rod Ends Studded
Amex Accepted
Amex
Secure Checkout
Rollers Screws Button Head Screws Cap Head Screws Captive Screws Cheese Head Screws Coach Screws Countersunk Screws Grub Screws Hex Head Screws Large Head
Paypal Accepted
Paypal
Secure Checkout
Screws Pan Head Screws Panel Screws Round Head Screws Security Screws Self Tapping Screws Shoulder Screws Square Head Screws Thumb Screws Wood Seals and Sealing
Visa Card Accepted
Visa
Secure Checkout
Sets Shaft Extenders and Reducers Shafting Aluminium Shafting General Purpose Shafting Precision Ground Shaftloc Shim Shock Absorbers Sleeves Snap Buttons
Master Card Accepted
Mastercard
Secure Checkout
Snaps Spacers Spare Part Boxes Spring Anchors Spring Motors Spring Mounts Spring Washers Spring Wire Springs Compression Springs Constant Force
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Springs Die Springs Disc Springs Extension Springs General Springs Torsion Spur Gear Stock Inch Square Shaft Stays Stops Spring Strip
Amex Accepted
Amex
Secure Checkout
Stroke Rotary Bushings Studs Suction Cups Switches Tape Tee Joints Tension Bushings Tensioners Thread Inserts Timing Belt Lengths
Paypal Accepted
Paypal
Secure Checkout
Tips Tolerance Rings Tooling Balls Tools Bending Tools Bits Tools Circlip Tools Cutting Tools Deburring Tools General Tools Pullers
Visa Card Accepted
Visa
Secure Checkout
Tools Screw Extractors Tools Threading Tube and Tubing Turntables Universal Joints Single V-Rings Vee Belts Washers Aligning Washers Finishing Washers Flat Fibre
Master Card Accepted
Mastercard
Secure Checkout
Washers Flat Metallic Washers Flat Plastic Washers Flat Rubber Washers Lock Washers Locking Washers Serrated Locking Washers Shoulder Washers Square Washers Thrust Wear Strips
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Wheels Industrial Wrenches Yoke Ends

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 153564 products in 2094 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.