Small Parts & Bearings - an MBA company

Bearings Thrust Ball Washers Only Chrome Steel Categories


Bearings Thrust


Bearings - Thrust - Ball - Washers Only - Chrome Steel
Bearings - Thrust - Ball - Washers Only - Chrome Steel

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Carbon Steel Washers are hardened to RC59.61. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Washers Only - Chrome Steel.

Related Information:

A larger range of Bearings - Thrust - Ball - Washers Only - Chrome Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Thrust - Ball - Washers Only - Chrome Steel on the Miniature Bearings Australia site.


Bearings - Thrust - Ball - Flat - Chrome Steel
Bearings - Thrust - Ball - Flat - Chrome Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Flat - Chrome Steel.

Related Information:

A larger range of Bearings - Thrust - Ball - Flat - Chrome Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Thrust - Ball - Flat - Chrome Steel on the Miniature Bearings Australia site.


Bearings - Thrust - Ball - Washers Only - Stainless Steel
Bearings - Thrust - Ball - Washers Only - Stainless Steel

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Stainless Steel Washers are hardened to HRC38.42. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Washers Only - Stainless Steel.

Related Information:

A larger range of Bearings - Thrust - Ball - Washers Only - Stainless Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Thrust - Ball - Washers Only - Stainless Steel on the Miniature Bearings Australia site.


Bearings - Thrust - Ball - Grooved - Chrome Steel
Bearings - Thrust - Ball - Grooved - Chrome Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Grooved - Chrome Steel.

Related Information:

A larger range of Bearings - Thrust - Ball - Grooved - Chrome Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Thrust - Ball - Grooved - Chrome Steel on the Miniature Bearings Australia site.


Bearings - Thrust - Ball - Flat - Stainless Steel
Bearings - Thrust - Ball - Flat - Stainless Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Flat - Stainless Steel.

Related Information:

A larger range of Bearings - Thrust - Ball - Flat - Stainless Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Thrust - Ball - Flat - Stainless Steel on the Miniature Bearings Australia site.


You may also be interested in

Bearings Single Row Ball


Bearings - Ball - Chrome Steel
Bearings - Ball - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome

Chrome steel radial ball bearings.

Standard single row radial ball bearings. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - Chrome Steel.

Related Information:

A larger range of Bearings - Ball - Chrome Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - Chrome Steel on the Miniature Bearings Australia site.


Bearings - Thrust - Roller - Washers
Bearings - Thrust - Roller - Washers

Also see combined categories:
All Roller Thrust Cages and Washers

Caged Rollers sold separately. Match these washers with cage and roller assembly from the cage and roller assembly category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Related Information:

A larger range of Bearings - Thrust - Roller - Washers might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Thrust - Roller - Washers on the Miniature Bearings Australia site.


Bearings - Thrust - Ball - Grooved - Stainless Steel
Bearings - Thrust - Ball - Grooved - Stainless Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Grooved - Stainless Steel.

Related Information:

A larger range of Bearings - Thrust - Ball - Grooved - Stainless Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Thrust - Ball - Grooved - Stainless Steel on the Miniature Bearings Australia site.


Bearings - Ball - Flanged - Chrome Steel
Bearings - Ball - Flanged - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - Flanged - Chrome Steel.

Related Information:

A larger range of Bearings - Ball - Flanged - Chrome Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - Flanged - Chrome Steel on the Miniature Bearings Australia site.


Bearings - Ball - WIR - Chrome Steel
Bearings - Ball - WIR - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with extended inner ring (wide inner ring). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - WIR - Chrome Steel.

Related Information:

A larger range of Bearings - Ball - WIR - Chrome Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - WIR - Chrome Steel on the Miniature Bearings Australia site.


Bearings - Ball - Angular Contact - Chrome Steel
Bearings - Ball - Angular Contact - Chrome Steel

Also see combined categories:
All Angular Contact Bearings

Including miniature sizes down to 8mm from stock and even smaller available.

Single row angular contact ball bearings. This category may be available in the new MBA online store at Bearings - Ball - Angular Contact - Chrome Steel.

Related Information:

A larger range of Bearings - Ball - Angular Contact - Chrome Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - Angular Contact - Chrome Steel on the Miniature Bearings Australia site.


Bearings - Ball - Flanged - WIR - Chrome Steel
Bearings - Ball - Flanged - WIR - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - Flanged - WIR - Chrome Steel.

Related Information:

A larger range of Bearings - Ball - Flanged - WIR - Chrome Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - Flanged - WIR - Chrome Steel on the Miniature Bearings Australia site.


Bearings - Ball - Double Row - Radial - Chrome Steel
Bearings - Ball - Double Row - Radial - Chrome Steel

Also see combined categories:
All Double Row Ball Bearings

This category may be available in the new MBA online store at Bearings - Ball - Double Row - Radial - Chrome Steel.

Related Information:

A larger range of Bearings - Ball - Double Row - Radial - Chrome Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - Double Row - Radial - Chrome Steel on the Miniature Bearings Australia site.


Bearings - Ball - With Snap Ring - Chrome Steel
Bearings - Ball - With Snap Ring - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Bearings with Snap Ring or Groove

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with snap ring. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - With Snap Ring - Chrome Steel.

Related Information:

A larger range of Bearings - Ball - With Snap Ring - Chrome Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - With Snap Ring - Chrome Steel on the Miniature Bearings Australia site.


Bearings - Thrust - Roller - Cage and Rollers Only
Bearings - Thrust - Roller - Cage and Rollers Only

Also see combined categories:
All Roller Thrust Cages and Washers

Washers sold separately. Match cage and roller assembly with washers from the washers category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Related Information:

A larger range of Bearings - Thrust - Roller - Cage and Rollers Only might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Thrust - Roller - Cage and Rollers Only on the Miniature Bearings Australia site.


Bearings - Ball - Double Row - Angular Contact - Chrome Steel
Bearings - Ball - Double Row - Angular Contact - Chrome Steel

Also see combined categories:
All Double Row Ball Bearings

Double Row Ball Bearings - Angular Contact.

This category may be available in the new MBA online store at Bearings - Ball - Double Row - Angular Contact - Chrome Steel.

Related Information:

A larger range of Bearings - Ball - Double Row - Angular Contact - Chrome Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - Double Row - Angular Contact - Chrome Steel on the Miniature Bearings Australia site.


Bearings - Ball - WIR - With Snap Ring - Chrome Steel
Bearings - Ball - WIR - With Snap Ring - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - WIR - With Snap Ring - Chrome Steel.

Related Information:

A larger range of Bearings - Ball - WIR - With Snap Ring - Chrome Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - WIR - With Snap Ring - Chrome Steel on the Miniature Bearings Australia site.


Bearings - Ball - With Snap Ring Groove Only - Chrome Steel
Bearings - Ball - With Snap Ring Groove Only - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Bearings with Snap Ring or Groove

Chrome Steel Bearings with a Snap Ring Groove on the OD. No Snap Ring.

Single row radial ball bearings with snap ring groove. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - With Snap Ring Groove Only - Chrome Steel.

Related Information:

A larger range of Bearings - Ball - With Snap Ring Groove Only - Chrome Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - With Snap Ring Groove Only - Chrome Steel on the Miniature Bearings Australia site.


Washers - Disc Spring - Ball Bearing Type
Washers - Disc Spring - Ball Bearing Type

Also see combined categories:
All Disc Springs

Specially designed for preloading the outer ring of ball bearings. C1075 steel. Includes disc springs to DIN 2093.

Ensures perfect bearing positioning with no sideways play. May be used to provide bearing preload. Load tolerance +/- 20% of load shown. This category may be available in the new MBA online store at Washers - Disc Spring - Ball Bearing Type.

A larger range of Washers - Disc Spring - Ball Bearing Type might be available on the Bearing Shop Online site. You might also be interested in the range of Washers - Disc Spring - Ball Bearing Type on the Miniature Bearings Australia site.


Washers - Flat - Sintered Bronze - Precision
Washers - Flat - Sintered Bronze - Precision

Also see combined categories:
All Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat thrust washers made from oil impregnated sintered bronze

This category may be available in the new MBA online store at Washers - Flat - Sintered Bronze - Precision.

Related Information:

A larger range of Washers - Flat - Sintered Bronze - Precision might be available on the Bearing Shop Online site. You might also be interested in the range of Washers - Flat - Sintered Bronze - Precision on the Miniature Bearings Australia site.


Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing


Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC.

A larger range of Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing on the Miniature Bearings Australia site.


Housings - Bearing - Tapped Base - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - Tapped Base - Thermoplastic with Chrome Steel Bearing


Thermoplastic housed units offer a more favourable economic choice. Hard chrome inserts offer an intermediate level of corrosion resistance.

Operating temperature minus 20 oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel.

A larger range of Housings - Bearing - Tapped Base - Thermoplastic with Chrome Steel Bearing might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Tapped Base - Thermoplastic with Chrome Steel Bearing on the Miniature Bearings Australia site.


Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing


Thermoplastic housed units offer a more favourable economic choice. Hard chrome inserts offer an intermediate level of corrosion resistance.

Operating temperature minus 20 oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel.

A larger range of Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing on the Miniature Bearings Australia site.


Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing


Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC.

A larger range of Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing on the Miniature Bearings Australia site.


Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing


Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC.

A larger range of Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing on the Miniature Bearings Australia site.


Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head - Female
Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head - Female

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Bearing Steel, hardened, ground and chromium plated Inner ring, Heavy duty bronze with embedded bronze - PTFE fabric Outter ring. Steel/Bronze - PTFE fabric Sliding Combination. Also known as Heim Joints

Maintenance free and no lubrication necessary. This category may be available in the new MBA online store at Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head - Female.

A larger range of Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head - Female might be available on the Bearing Shop Online site. You might also be interested in the range of Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head - Female on the Miniature Bearings Australia site.


Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head - Male
Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head - Male

Also see combined categories:
All Male Rod Ends
All Steel Male Rod Ends

Bearing Steel, hardened, ground and chromium plated Inner ring, Heavy duty bronze with embedded bronze - PTFE fabric Outter ring. Steel/Bronze - PTFE fabric Sliding Combination.

Maintenance free and no lubrication necessary. Also known as Heim Joints. This category may be available in the new MBA online store at Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head - Male.

A larger range of Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head - Male might be available on the Bearing Shop Online site. You might also be interested in the range of Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head - Male on the Miniature Bearings Australia site.


Bearings - Self Clinching - Self Aligning - Sintered Bronze
Bearings - Self Clinching - Self Aligning - Sintered Bronze

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo sintered bronze bearing in a special self-clinching steel housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:

A larger range of Bearings - Self Clinching - Self Aligning - Sintered Bronze might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Self Clinching - Self Aligning - Sintered Bronze on the Miniature Bearings Australia site.


Bearings - Thrust - Ball - Banded
Bearings - Thrust - Ball - Banded

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Banded Type

This category may be available in the new MBA online store at Bearings - Thrust - Ball - Banded.

Related Information:

A larger range of Bearings - Thrust - Ball - Banded might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Thrust - Ball - Banded on the Miniature Bearings Australia site.


Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic
Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type. Excellent performance in electrical and magnetism sensitive applications. Full ceramic silicon nitride.

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic.

Related Information:

A larger range of Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic on the Miniature Bearings Australia site.


Bushes - Steel - DU - Split - Flanged
Bushes - Steel - DU - Split - Flanged

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE). Lead free.

Operating Temperature -200o to 280o Celsuis. Maximum Load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments. Speed Limit in oil 5 metres surface speed per second.

Related Information:

A larger range of Bushes - Steel - DU - Split - Flanged might be available on the Bearing Shop Online site. You might also be interested in the range of Bushes - Steel - DU - Split - Flanged on the Miniature Bearings Australia site.


Bushes - Steel - DU - Split - Unflanged
Bushes - Steel - DU - Split - Unflanged

Also see combined categories:
All Steel Bushes
All Unflanged Steel Bushes

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE). Lead free.

Operating Temperature -200o to 280o Celsius. Maximum load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments. Speed Limit in oil 5 metres surface speed per second.

Related Information:

A larger range of Bushes - Steel - DU - Split - Unflanged might be available on the Bearing Shop Online site. You might also be interested in the range of Bushes - Steel - DU - Split - Unflanged on the Miniature Bearings Australia site.


Washers - Spring - Wave Type - Carbon Steel
Washers - Spring - Wave Type - Carbon Steel

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave. Includes 2 and 3 wave types. This category includes EPL type bearing pre-load washers.

This category may be available in the new MBA online store at Washers - Spring - Wave Type - Carbon Steel.

A larger range of Washers - Spring - Wave Type - Carbon Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Washers - Spring - Wave Type - Carbon Steel on the Miniature Bearings Australia site.


Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium
Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium


Starting at 8mm bore size, aluminium silver series housings with removable chrome steel bearing

This category may be available in the new MBA online store at Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium.

A larger range of Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium on the Miniature Bearings Australia site.


Bearings - Ball - 316 Stainless Steel - Double Row - Open
Bearings - Ball - 316 Stainless Steel - Double Row - Open

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. This category may be available in the new MBA online store at Bearings - Ball - 316 Stainless Steel - Double Row - Open.

Related Information:

A larger range of Bearings - Ball - 316 Stainless Steel - Double Row - Open might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - 316 Stainless Steel - Double Row - Open on the Miniature Bearings Australia site.


Bearings - Ball - 316 Stainless Steel - Single Row - Open
Bearings - Ball - 316 Stainless Steel - Single Row - Open

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. This category may be available in the new MBA online store at Bearings - Ball - 316 Stainless Steel - Single Row - Open.

Related Information:

A larger range of Bearings - Ball - 316 Stainless Steel - Single Row - Open might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - 316 Stainless Steel - Single Row - Open on the Miniature Bearings Australia site.


Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

A larger range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed on the Miniature Bearings Australia site.


Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

A larger range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded on the Miniature Bearings Australia site.


Bearings - Linear - Ball - Stainless Steel - Closed
Bearings - Linear - Ball - Stainless Steel - Closed

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous. This category may be available in the new MBA online store at Bearings - Linear - Ball - Stainless Steel - Closed.

Related Information:

A larger range of Bearings - Linear - Ball - Stainless Steel - Closed might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Linear - Ball - Stainless Steel - Closed on the Miniature Bearings Australia site.


Bearings - Linear - Ball - Thomson Precision Steel - Closed
Bearings - Linear - Ball - Thomson Precision Steel - Closed

Also see combined categories:
All Thomson Linear Ball Bearings

For running on shafts fixed at the ends.

This category may be available in the new MBA online store at Bearings - Linear - Ball - Thomson Precision Steel - Closed.

Related Information:

A larger range of Bearings - Linear - Ball - Thomson Precision Steel - Closed might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Linear - Ball - Thomson Precision Steel - Closed on the Miniature Bearings Australia site.


Bearings - Ball - Ceramic Hybrid
Bearings - Ball - Ceramic Hybrid

Also see combined categories:
All Radial Ball Bearings

Steel Races with Si3N4 Ceramic Balls

Bearings with steel races and ceramic balls. For standard bearings, the balls are usually one of the first components to show wear. Ceramic balls are harder than steel and do not wear as easily. Items with high speed cages have the suffixes T9H, TNH, TW or KC. This category may be available in the new MBA online store at Bearings - Ball - Ceramic Hybrid.

Related Information:

A larger range of Bearings - Ball - Ceramic Hybrid might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - Ceramic Hybrid on the Miniature Bearings Australia site.


Bearings - Ball - Double Row - Angular Contact - Stainless Steel
Bearings - Ball - Double Row - Angular Contact - Stainless Steel

Also see combined categories:
All Double Row Ball Bearings

Double Row Ball Bearings - Angular Contact.

This category may be available in the new MBA online store at Bearings - Ball - Double Row - Angular Contact - Stainless Steel.

Related Information:

A larger range of Bearings - Ball - Double Row - Angular Contact - Stainless Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - Double Row - Angular Contact - Stainless Steel on the Miniature Bearings Australia site.


Bearings - Ball - Flanged - 440C Stainless
Bearings - Ball - Flanged - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - Flanged - 440C Stainless.

Related Information:

A larger range of Bearings - Ball - Flanged - 440C Stainless might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - Flanged - 440C Stainless on the Miniature Bearings Australia site.


Bearings - Ball - 440C Stainless
Bearings - Ball - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome

Stainless steel radial ball bearings

Standard single row radial ball bearings. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - 440C Stainless.

Related Information:

A larger range of Bearings - Ball - 440C Stainless might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - 440C Stainless on the Miniature Bearings Australia site.


Bearings - Ball - Flanged - WIR - 440C Stainless
Bearings - Ball - Flanged - WIR - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - Flanged - WIR - 440C Stainless.

Related Information:

A larger range of Bearings - Ball - Flanged - WIR - 440C Stainless might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - Flanged - WIR - 440C Stainless on the Miniature Bearings Australia site.


Bearings - Ball - WIR - 440C Stainless
Bearings - Ball - WIR - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Stainless Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with extended inner ring (wide inner ring). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - WIR - 440C Stainless.

Related Information:

A larger range of Bearings - Ball - WIR - 440C Stainless might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - WIR - 440C Stainless on the Miniature Bearings Australia site.


Bearings - Ball - Flanged - High Precision - 440C Stainless
Bearings - Ball - Flanged - High Precision - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive). This category may be available in the new MBA online store at Bearings - Ball - Flanged - High Precision - 440C Stainless.

Related Information:

A larger range of Bearings - Ball - Flanged - High Precision - 440C Stainless might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - Flanged - High Precision - 440C Stainless on the Miniature Bearings Australia site.


Bearings - Ball - High Precision - 440C Stainless
Bearings - Ball - High Precision - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome

Stainless Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive). This category may be available in the new MBA online store at Bearings - Ball - High Precision - 440C Stainless.

Related Information:

A larger range of Bearings - Ball - High Precision - 440C Stainless might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - High Precision - 440C Stainless on the Miniature Bearings Australia site.


Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless
Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive). This category may be available in the new MBA online store at Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless.

Related Information:

A larger range of Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless on the Miniature Bearings Australia site.


Bearings - Ball - WIR - High Precision - 440C Stainless
Bearings - Ball - WIR - High Precision - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Stainless Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings with extended inner ring (wide inner ring). True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive). This category may be available in the new MBA online store at Bearings - Ball - WIR - High Precision - 440C Stainless.

Related Information:

A larger range of Bearings - Ball - WIR - High Precision - 440C Stainless might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - WIR - High Precision - 440C Stainless on the Miniature Bearings Australia site.





Main Pages

About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 138615 products in 2015 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 138615 products in 2015 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.