Bearings Press In Categories
Bearings - Press-Fit - Acetal - SDP
Press fit installation. Do not press bearing against insert. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Carbon steel outer. Self aligning to +/- 5o. Use any shaft material with 0.4 um or finer finish.
Related Information:
A larger range of Bearings - Press-Fit - Acetal - SDP might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Press-Fit - Acetal - SDP on the Miniature Bearings Australia site.
Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP
Porous sintered bronze bearing. -28 to 95 oC. Retainer : Carbon Steel / Zinc Plated or Oxycote(R) Hardened to HRB 93.98. Use any shaft material with 0.8 um or finer finish.
Related Information:
A larger range of Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP on the Miniature Bearings Australia site.
You may also be interested in
Housings with Bearing
Bearings - Self Clinching - Miniature - Self Aligning
Spyraflo pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs and simplify designs. Designed to press into a mounting plate as thin as 1.5mm.
Clinches into a plate bored to the required housing bore. Minimum plate thickness 1.6mm to no maximum. Maximum mounting hardness 100 Rockwell B. Operating temperature Minus 34 oC to Plus 121 Deg C. Compensates for mounting hole tolerances up to 0.07mm. 4.76 to 10mm bores. RoHS, REACH and SVHC environmental compliant.
A larger range of Bearings - Self Clinching - Miniature - Self Aligning might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Self Clinching - Miniature - Self Aligning on the Miniature Bearings Australia site.
Housings - Bearing - Pedestal - Miniature - Self Aligning
Spyraflo pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs. Simplify designs.
Small and cost effective. All bore sizes are mounted in the same size housing for ease of design and cost efficiency. High precision bearings pre-mounted with a 5o misalignment capability. 40,000 RPM recommended maximum speed with testing. 27kgf radial static capacity, 54kgf radial dynamic capacity per bearing. RoHS, REACH and SVHC environmental compliant.
A larger range of Housings - Bearing - Pedestal - Miniature - Self Aligning might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Pedestal - Miniature - Self Aligning on the Miniature Bearings Australia site.
Bearings Mounted
Bearings - Press-Fit - Self Aligning - Delrin -tm-
Spyraflo acetal bearings in specially designed press fit retainers
See links at bottom of web page for more information. +/- 5% Static Alignment. Use punch of min dia. J relieved to dia. K x 2mm deep. Refer datasheet for dia. K and J. Link at bottom of web page.
Related Information:
A larger range of Bearings - Press-Fit - Self Aligning - Delrin -tm- might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Press-Fit - Self Aligning - Delrin -tm- on the Miniature Bearings Australia site.
Bearings - Press-Fit - Self Aligning - Sintered Bronze
Spyraflo sintered bronze bearings in specially designed press fit retainers
See links at bottom of web page for more information. +/- 5% Static Alignment. Use punch of min dia. J relieved to dia. K x 2mm deep. Refer datasheet for dia. K and J. Link at bottom of web page.
Related Information:
A larger range of Bearings - Press-Fit - Self Aligning - Sintered Bronze might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Press-Fit - Self Aligning - Sintered Bronze on the Miniature Bearings Australia site.
Bearings for Housings
Bearings - For Pressed Metal Housings
Insert bearings with spherical OD for use with pressed metal flanged and pillow block housings.
Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request.
Related Information:
A larger range of Bearings - For Pressed Metal Housings might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - For Pressed Metal Housings on the Miniature Bearings Australia site.
Bearings and Housings Insert
Housings - Bearing - Pillow Block - Pressed Metal
Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.
Related Information:
A larger range of Housings - Bearing - Pillow Block - Pressed Metal might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Pillow Block - Pressed Metal on the Miniature Bearings Australia site.
Housings - Bearing - Flanged - 2 Bolt Hole - Pressed Metal
Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.
Related Information:
A larger range of Housings - Bearing - Flanged - 2 Bolt Hole - Pressed Metal might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Flanged - 2 Bolt Hole - Pressed Metal on the Miniature Bearings Australia site.
Housings - Bearing - Flanged - 3 Bolt Hole - Pressed Metal
Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.
Related Information:
A larger range of Housings - Bearing - Flanged - 3 Bolt Hole - Pressed Metal might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Flanged - 3 Bolt Hole - Pressed Metal on the Miniature Bearings Australia site.
Bearings One Way Clutch
Bearings - One Way - Sprag - Standard
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
Designed for press fit installation. Correct interference dimensions must be maintained to obtain maximum bearing and clutch performance. Mount the clutch ensuring that the shaft drive directionis in the direction indicated by the arrow on the inner race. To install, use a press tool / do not hammer or apply other stock to clutch. Make sure housing has enough strength to withstand press required for fitting installation. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes.
Related Information:
A larger range of Bearings - One Way - Sprag - Standard might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - One Way - Sprag - Standard on the Miniature Bearings Australia site.
Ball Transfers
Ball Transfer Units - Flange Mount - Heavy Duty - Pressed Steel
Single ball bearings units for conveyor systems
A larger range of Ball Transfer Units - Flange Mount - Heavy Duty - Pressed Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Ball Transfer Units - Flange Mount - Heavy Duty - Pressed Steel on the Miniature Bearings Australia site.
Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated
Single ball bearings units for conveyor systems
Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.
A larger range of Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated might be available on the Bearing Shop Online site. You might also be interested in the range of Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated on the Miniature Bearings Australia site.
Ball Transfer Units - Spring Loaded - Unflanged - Zinc Plated
Single ball bearings units for conveyor systems
Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.
A larger range of Ball Transfer Units - Spring Loaded - Unflanged - Zinc Plated might be available on the Bearing Shop Online site. You might also be interested in the range of Ball Transfer Units - Spring Loaded - Unflanged - Zinc Plated on the Miniature Bearings Australia site.
Linear Slides
Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted two member slide. Positive locking mechanism keeps drawer locked in the open position until actively released. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).
You might also be interested in the range of Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext on the Miniature Bearings Australia site.
Linear Bearings
Bearings - Linear - Sliding - Ceramic Coated
Approved for direct food contact in applications where animal fat or food approved lubricants are present.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Minimum shaft hardness RC35. Max PV 40,000. Temperature range -125 oC to +226 Deg C. Max static PSI 5000.
A larger range of Bearings - Linear - Sliding - Ceramic Coated might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Linear - Sliding - Ceramic Coated on the Miniature Bearings Australia site.
Pressure Rollers
Bearings - Pressure Roller - With Urethane OD
Bearings with Urethane Tyre on OD for applications requiring frictional movement.
For applications including paper and card dispensing and rolling (eg ATM Machines).
Related Information:
A larger range of Bearings - Pressure Roller - With Urethane OD might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Pressure Roller - With Urethane OD on the Miniature Bearings Australia site.
Bearings Hydrodynamic
Bearings - Hydrodynamic Pressure
Alternative to ball bearings - quiet operation - patented design.
Applications include compact fan motors, copy machines, printers, laptop computers, cameras and toys. Stainless Steel casing and shield - Long Life. Use with Case Hardened shafting 2um surface finish -0.007/-0.012 for normal use. Use with Case Hardened shafting 1um surface finish -0.005/-0.007 for high accuracy use. 30% weight savings over ball bearings.
Related Information:
A larger range of Bearings - Hydrodynamic Pressure might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Hydrodynamic Pressure on the Miniature Bearings Australia site.
Linear Bearings with Housing
Housings - Linear - Pillow Block - Closed - Ceramic Coated
Approved for direct food contact in applications where animal fat or food approved lubricants are present.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. DO NOT USE WD-40 or Silcone based spray lubricants.
A larger range of Housings - Linear - Pillow Block - Closed - Ceramic Coated might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Linear - Pillow Block - Closed - Ceramic Coated on the Miniature Bearings Australia site.
Bearings Ceramic
Bearings - Ceramic Si3N4 - Radial
Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.
Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls and rings. HRC80 Hardness. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 700 deg C without a cage or seals.
Related Information:
A larger range of Bearings - Ceramic Si3N4 - Radial might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ceramic Si3N4 - Radial on the Miniature Bearings Australia site.
Bearings - Ceramic ZrO2 - Radial
Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.
Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 1000 deg C without a cage or seals.
Related Information:
A larger range of Bearings - Ceramic ZrO2 - Radial might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ceramic ZrO2 - Radial on the Miniature Bearings Australia site.
Bearings for Wheelbarrows
Bearings - Unground
Unground bearings used in trolleys, prams and wheel barrow wheels
A larger range of Bearings - Unground might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Unground on the Miniature Bearings Australia site.
Bearings Ceramic
Bearings - Ceramic Si3N4 - Angular Contact
Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.
Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls and rings. HRC80 Hardness. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 700 deg C without a cage or seals.
Related Information:
A larger range of Bearings - Ceramic Si3N4 - Angular Contact might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ceramic Si3N4 - Angular Contact on the Miniature Bearings Australia site.
Bearings - Ceramic ZRO2- Angular Contact
Excellent performance in electrical and magnetism sensitive applications. Full ceramic zirconia.
Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 1000 deg C without a cage or seals.
Related Information:
A larger range of Bearings - Ceramic ZRO2- Angular Contact might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ceramic ZRO2- Angular Contact on the Miniature Bearings Australia site.
Bearings - Ceramic ZrO2 - Self Aligning - Double Row
Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.
Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls and rings. Si3N4 available to special order. High and low temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 1000 deg C without a cage or seals.
Related Information:
A larger range of Bearings - Ceramic ZrO2 - Self Aligning - Double Row might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ceramic ZrO2 - Self Aligning - Double Row on the Miniature Bearings Australia site.
Dental Handpiece Parts
Prestige Bien Air Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
A larger range of Prestige Bien Air Parts might be available on the Bearing Shop Online site. You might also be interested in the range of Prestige Bien Air Parts on the Miniature Bearings Australia site.
Bearings Mounted
Bearings - Self Clinching - Self Aligning - Delrin -tm-
Spyraflo acetal bearings in a special steel self-clinching housing. Refer technical sheets linked at bottom of tables.
See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).
Related Information:
A larger range of Bearings - Self Clinching - Self Aligning - Delrin -tm- might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Self Clinching - Self Aligning - Delrin -tm- on the Miniature Bearings Australia site.
Bearings One Way Clutch
Bearings - One Way - Roller
Roller Clutch Bearings rotate in one direction only.
Recommended Shaft Diameter for Clutch Bearings without Inner Ring is +0.000 / -0.005 mm.
Related Information:
A larger range of Bearings - One Way - Roller might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - One Way - Roller on the Miniature Bearings Australia site.
Bearings Special Purpose
Bearings - Gothic Groove Profile OD
Bearings with a Gothic Groove in OD. Round Track Rolling Applications.
Type GP : Single Row of Balls (Radial). Type DWRAGP : Double Row of Balls (Angular Contact) - Extended Inner Ring. Type DRAGP : Double Row of Balls (Angular Contact) - Flush Inner Ring.
Related Information:
A larger range of Bearings - Gothic Groove Profile OD might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Gothic Groove Profile OD on the Miniature Bearings Australia site.
Bearings Mounted
Bearings - Self Clinching - Self Aligning - Needle Roller
Spyraflo needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.
See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).
Related Information:
A larger range of Bearings - Self Clinching - Self Aligning - Needle Roller might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Self Clinching - Self Aligning - Needle Roller on the Miniature Bearings Australia site.
Bearings - Self Clinching - Self Aligning - Sintered Bronze
Spyraflo sintered bronze bearing in a special self-clinching steel housing. Refer technical sheets linked at bottom of tables.
See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).
Related Information:
A larger range of Bearings - Self Clinching - Self Aligning - Sintered Bronze might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Self Clinching - Self Aligning - Sintered Bronze on the Miniature Bearings Australia site.
Bearings - Self Clinching - Self Aligning - Stainless and Delrin -tm-
Spyraflo acetal bearings in a special stainless steel self-clinching housing. Refer technical sheets linked at bottom of tables.
See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).
Related Information:
A larger range of Bearings - Self Clinching - Self Aligning - Stainless and Delrin -tm- might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Self Clinching - Self Aligning - Stainless and Delrin -tm- on the Miniature Bearings Australia site.
Bearings Special Purpose
Bearings - Ball - 4 Point Contact
4 Point Contact Bearings support Axial Loads in both directions. Can replace double row angular contact bearings where space is limited.
Related Information:
A larger range of Bearings - Ball - 4 Point Contact might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - 4 Point Contact on the Miniature Bearings Australia site.
Bearings Thrust
Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic
3 Piece Thrust Bearings Open Type. Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics.
Related Information:
A larger range of Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic on the Miniature Bearings Australia site.
Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic
3 Piece Thrust Bearings Open Type. Excellent performance in electrical and magnetism sensitive applications. Full ceramic silicon nitride.
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Related Information:
A larger range of Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic on the Miniature Bearings Australia site.
Bearings Special Purpose
Bearings - Chamfered Edges
Chamfered edge bearings for Linear Guide Systems and pushbikes
Often used in pushbike headsets. Note bearings for pushbikes with two chamfered edges have the chamfer on the inner ring on one side and outer ring on the other - designation CEP.
Related Information:
A larger range of Bearings - Chamfered Edges might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Chamfered Edges on the Miniature Bearings Australia site.
Housings with Bearing
Housings - Bearing - Pillow Block - Nylon with Ertalyte Bearing
Flanged Ertalyte Bearing in Moulded Nylon 101 Housing.
Self-Lubricating. High Performance. Electrically Insulating.
A larger range of Housings - Bearing - Pillow Block - Nylon with Ertalyte Bearing might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Pillow Block - Nylon with Ertalyte Bearing on the Miniature Bearings Australia site.
Linear Bearings with Housing
Housings - Bearing - Pillow Block - Frelon - Standard - Closed
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.
A larger range of Housings - Bearing - Pillow Block - Frelon - Standard - Closed might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Pillow Block - Frelon - Standard - Closed on the Miniature Bearings Australia site.
Housings - Bearing - Pillow Block - Frelon - Standard - Open
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.
A larger range of Housings - Bearing - Pillow Block - Frelon - Standard - Open might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Pillow Block - Frelon - Standard - Open on the Miniature Bearings Australia site.
Linear Slides
Slides - Drawer - Front Disconnect - Latch Lever - Full Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).
You might also be interested in the range of Slides - Drawer - Front Disconnect - Latch Lever - Full Ext on the Miniature Bearings Australia site.
Linear Bearings
Bearings - Linear - Sliding - Stainless - PTFE - Closed
Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.
A larger range of Bearings - Linear - Sliding - Stainless - PTFE - Closed might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Linear - Sliding - Stainless - PTFE - Closed on the Miniature Bearings Australia site.
Bearings - Linear - Sliding - Stainless - PTFE - Open
Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.
A larger range of Bearings - Linear - Sliding - Stainless - PTFE - Open might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Linear - Sliding - Stainless - PTFE - Open on the Miniature Bearings Australia site.
Linear Bearings with Housing
Housings - Bearing - Flange Mounted - Frelon - Self Aligning
Single and double length
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.
You might also be interested in the range of Housings - Bearing - Flange Mounted - Frelon - Self Aligning on the Miniature Bearings Australia site.
Housings - Bearing - Pillow Block - Frelon - Precision - Closed
Single and double length
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.
A larger range of Housings - Bearing - Pillow Block - Frelon - Precision - Closed might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Pillow Block - Frelon - Precision - Closed on the Miniature Bearings Australia site.
Housings - Bearing - Pillow Block - Frelon - Precision - Open
Single and double length
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.
A larger range of Housings - Bearing - Pillow Block - Frelon - Precision - Open might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Pillow Block - Frelon - Precision - Open on the Miniature Bearings Australia site.
Bearings Acetal Plastic
Bearings for Pool Equipment
Acetal bearings for spa jets and pool vacuum wheels
No lubrication required other than the water they are running in.
Related Information:
A larger range of Bearings for Pool Equipment might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings for Pool Equipment on the Miniature Bearings Australia site.
Bearings - Polypropylene - Special Types
Polypropylene is for special chemical compatibility usages. Please refer to a compatibility chart.
See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.
A larger range of Bearings - Polypropylene - Special Types might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Polypropylene - Special Types on the Miniature Bearings Australia site.
Bearings - Acetal - Special Types
Light duty acetal bearings used for drawer runners, light duty tracks, garage doors and more.
See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.
A larger range of Bearings - Acetal - Special Types might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Acetal - Special Types on the Miniature Bearings Australia site.
Bearings Stainless Special Grades
Bearings - Ball - Anti Corrosion - Special Stainless
Higher corrosion resistance than 440C stainless - HRC59 Hardness - Same or higher load than 440C
Ideal for applications with salt spray or chemicals in the pH range 3 to 12. ISC CASSTOP design with special TBN-6H stainless steel. Other sizes available on request.
Related Information:
A larger range of Bearings - Ball - Anti Corrosion - Special Stainless might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - Anti Corrosion - Special Stainless on the Miniature Bearings Australia site.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 127030 products in 2352 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
