Bearings Linear Categories
- from Small Parts and Bearings

Bearings - Linear - Ball - Closed

Search Rating: 100%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 ^oC Intermittent, 80 Deg C continuous.

Bearings - Linear - Ball - Miniature - Super High Precision

Search Rating: 100%

Also see combined categories:
All Closed Linear Ball Bearings

High Precision Corrosion Resistant Miniature Linear Bearings.

High Precision Swiss Made, Accurate Guiding, Smooth Running. High Load Capacity. Tolerances --- d (+0.008 / -0.000 mm) D (+0.000 / -0.010 mm). Recommended Outer ring fitted with interferance of 1-3 Microns or retained by Circlips. Shafts (not included) should be 60-63 Rockwell C hardness with tolerances +0.000 / -0.006 mm.

Bearings - Linear - Ball - Stainless Steel - Closed

Search Rating: 100%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 ^oC Intermittent, 80 Deg C continuous.

Bearings - Linear - Ball - Thomson Precision Steel - Closed

Search Rating: 100%

Also see combined categories:
All Thomson Linear Ball Bearings

For running on shafts fixed at the ends.

Bearings - Linear - Frelon Gold Lined - Closed - Precision

Search Rating: 100%

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.

Bearings - Linear - Frelon Gold Lined - Closed - Standard

Search Rating: 100%

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.

Bearings - Linear - Frelon Gold Lined - Open - Precision

Search Rating: 100%

Also see combined categories:
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.

Bearings - Linear - Frelon Gold Lined - Open - Standard

Search Rating: 100%

Also see combined categories:
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.

Bearings - Linear - Frelon J Lined - Closed - Precision

Search Rating: 100%

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Precision type has closer running clearances.

Bearings - Linear - Frelon J Lined - Closed - Standard

Search Rating: 100%

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Standard type has slightly larger running clearances.

Bearings - Linear - Sliding - Ceramic Coated

Search Rating: 100%

Also see combined categories:
All Sliding Linear Bearings

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Minimum shaft hardness RC35. Max PV 40,000. Temperature range -125 ^oC to +226 Deg C. Max static PSI 5000.

Bearings - Linear - Sliding - Stainless - PTFE - Closed

Search Rating: 100%

Also see combined categories:
All Sliding Linear Bearings

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 ^oC to 190 ^oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.

Bearings - Linear - Sliding - Stainless - PTFE - Open

Search Rating: 100%

Also see combined categories:
All Sliding Linear Bearings

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 ^oC to 190 ^oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.

Seals - For Linear Bearings - Closed

Search Rating: 99%

Also see combined categories:
All Oil Seals

Seals - For Linear Bearings - Open

Search Rating: 99%

Also see combined categories:
All Oil Seals

Linear Ball Splines - Bearings - Unflanged

Search Rating: 75%

Also see combined categories:
All Linear Ball Splines

Use with Linear Ball Spline Shaft.

Housings - Linear - Square

Search Rating: 74%

Also see combined categories:
All Linear Bearing Housings

Used to maintain radial integrity and eliminate the need for parallel shafting.

Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.

Bearings - Chamfered Edges

Search Rating: 74%

Chamfered edge bearings for Linear Guide Systems and pushbikes

Often used in pushbike headsets. Note bearings for pushbikes with two chamfered edges have the chamfer on the inner ring on one side and outer ring on the other - designation CEP.

Drylin Linear Assembly Parts - Carriage Only

Search Rating: 74%

Also see combined categories:
All Drylin Assembly Parts

Linear sliding motion. Plain and Locking Types. These carriages require a matching guide rail or matching rack and pinion. Match by size.

Drylin^(R) T linear guides are maintenance free and run without additional lubrication. Consequently, they are also suitable for use in damp or dirty environments. Available with a manually operated clamp to achieve a force fit at any desired point along the travel path. The wing screw is used to clamp the slide in place of the guide. Matching components listed in separate category.

Housings - Bearing - Flange Mounted - Frelon - Self Aligning

Search Rating: 74%

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Precision - Closed

Search Rating: 74%

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Precision - Open

Search Rating: 74%

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Standard - Closed

Search Rating: 74%

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Standard - Open

Search Rating: 74%

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.

Housings - Linear - Square - Clamps

Search Rating: 74%

Also see combined categories:
All Linear Bearing Housings

Drylin Sliding Bearings

Search Rating: 74%

Linear sliding motion. Use with Drylin Aluminium Shafts.

Sliding film Iglidur J. Maximum Mean Surface Pressure: 25 N/mm2. Highest Wear Resistance at loads: Less than 2 N/mm2. Maximum Speed: 8 m/s (dry) Greater than 10 m/s (lubricated) 1.5 m/s (rotating dry). Working Temp. Range: -60^oC to +100^oC (increased wear when used in excess of 80^oC).

Drylin Linear Assembly Parts - Guide Rails Only

Search Rating: 73%

Also see combined categories:
All Drylin Assembly Parts

These rails require a matching carriage as listed in a separate category. Match by size.

Slide Rail: Extruded Aluminium Construction Material: Al Mg Si 0.5. Coating: Hard anodised, 50um Hardness: 500HV. Matching components listed in separate category.

Drylin - Linear - Slides and Carriages - Size 17

Search Rating: 73%

Also see combined categories:
All Drylin Slides and Carriages

Linear sliding motion.

Guide Rail Weight: 150 g/m. Carriage Weight: 1.7g. Max Rail Length: 1960 mm. Standard Bore Scheme: Symmetrical C5 = C6. Particularly insensitive to dust, dirt and water.

Drylin - Linear - Slides and Carriages - Size 27

Search Rating: 73%

Also see combined categories:
All Drylin Slides and Carriages

Linear sliding motion.

Guide Rail Weight: 290 g/m. Carriage Weight: 10.8 or 12.5g. Max Rail Length: 2000 mm. Standard Bore Scheme: Symmetrical C5 = C6. Particularly insensitive to dust, dirt and water.

Drylin - Linear - Slides and Carriages - Size 80

Search Rating: 73%

Also see combined categories:
All Drylin Slides and Carriages

Linear sliding motion.

Guide Rail Weight: 1140 g/m. Carriage Weight: 100g. Max Rail Length: 2000 mm. Standard Bore Scheme: Symmetrical C5 = C6. Particularly insensitive to dust, dirt and water.

Housings - Linear - Thomson Super Flanged

Search Rating: 73%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.

Housings - Linear - Thomson Super Smart Flanged

Search Rating: 73%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.

Slides - Linear - Cross Roller Rail

Search Rating: 73%

Also see combined categories:
All Linear Slides

Compact, precision bearings that can support and guide high loads with high accuracy and repeatability, low friction, and low starting force.

Each consists of a pair of hardened steel ways containing 90 deg V grooves and a row of alternately crossed cylindrical rollers. Installed faced to face on smooth flat and accurately parallel, coplanar or perpendicular surfaces. Lubrication required, light grease for low speeds to continuous oil bath/mist for high speeds.

Drylin Sliding Film

Search Rating: 73%

Linear sliding motion. Use with Drylin Aluminium Shafts.

Sliding film Iglidur J.

Rings - Retaining - C Type External - For Linear Bearings

Search Rating: 73%

Fits into the retaining ring grooves on the outside diameter of Super Smart, Super and Precision Linear Bearings to provide external mounting retension.

Housings - Linear - Pillow Block - Closed - Ceramic Coated

Search Rating: 73%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. DO NOT USE WD-40 or Silcone based spray lubricants.

Linear Guide System - Two Piece

Search Rating: 73%

Using Frelon Gold plain bearing technology. Rail and carriage are made from 6063-T6 aluminium and come as a set.

Rails are ceramic coated to resist corrosion and repel weld spatter and contaminants. Smooth running. Dampens vibration. Guide has slots for T nuts or bolts. Two component system allows for easier installation than traditional rail systems.

Housings - Linear - Thomson Super Smart Pillow Block - Closed

Search Rating: 73%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.

Rings - Retaining - PR Type Internal - For Linear Bearings

Search Rating: 72%

Push in retaining ring for use with closed type Super Smart, Super and Precision linear bearings. Installed in the housing bore at each end of the linear bearing.

Housings - Linear - Thomson Super Smart Twin Pillow Block - Closed - Footed

Search Rating: 72%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.

Housings - Linear - Thomson Super Smart Twin Pillow Block - Open - Footed

Search Rating: 72%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.

Linear Ball Splines - Shaft

Search Rating: 71%

Also see combined categories:
All Linear Ball Splines

Use with either flanged or unflanged Linear Ball Spline Bearings.

Linear Slides - Utilitrak - CR - Carriage

Search Rating: 71%

Use with Utilitrak CR Channel. Stainless steel wheels with sealed bearings. Match by size.

Bearings - Spherical OD

Search Rating: 71%

Bearings with a spherical outside diameter.

Combined listing of spherical OD track rollers and bearings for Linear Guide systems.

Slides - Drawer - Front Disconnect - Friction - 19mm Ext

Search Rating: 70%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Friction brake allows drawer to come to a slow stop. Front disconnects by pulling firmly on the drawer until it releases. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Slides - Drawer - Front Disconnect - Lever - Full Ext

Search Rating: 70%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by lifting a lever lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage

Search Rating: 70%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Undercarriage mounted two member slide. Friction brake allows drawer to come to a slow stop. Only one required per drawer. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). Shipped with a bracket and two plastic tracks.

Slides - Drawer - Front Disconnect - Latch Lever - Full Ext

Search Rating: 70%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext

Search Rating: 70%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide with a quick disconnect.

Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext

Search Rating: 70%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive locking mechanism keeps drawer locked in the open position until actively released. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Linear Slides - Cross Roller Tables - Aluminium

Search Rating: 69%

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Prtecision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

Linear Slides - Cross Roller Tables - Steel

Search Rating: 69%

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Prtecision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

Shafting - Aluminium - Ceramic Coated

Search Rating: 69%

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext

Search Rating: 69%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive stop slide that will not disconnect once installed. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext

Search Rating: 69%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.

Slides - Drawer - Stainless - No Disconnect - Medium Duty - 19mm Ext

Search Rating: 69%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive stop slide that will not disconnect once installed. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext

Search Rating: 69%

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.

Linear Slides - Low Profile - Crossed Roller Table - Aluminium

Search Rating: 69%

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Prtecision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

Shafting - Aluminium - Ceramic Coated - Tapped

Search Rating: 69%

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel

Search Rating: 68%

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Prtecision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

Shafting - Pre Drilled and Tapped - High Carbon Steel

Search Rating: 66%

Also see combined categories:
All Shafting
All Steel Shafting

For use with rail supports and open linear bearings

Straightness: 0.1 mm / mtr.

Shafting - Pre Drilled and Tapped - Stainless Steel Steel

Search Rating: 66%

Also see combined categories:
All Shafting
All Stainless Shafting

For use with rail supports and open linear bearings

Ball Transfer Units - Screw Stem - Stainless - Precision

Search Rating: 66%

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.

Ball Transfer Units - Screw Stem - Steel - Precision

Search Rating: 66%

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.

Linear - Mini Rail - Self-Lubricating - Carriage

Search Rating: 65%

Additional carriages for the Mini-Rail system. Match by rail width.

Low profile self-lubricating linear guide system with one piece carriage design. Excellent alternative to linear ball bearing systems. Precision series made from RC70 ceramic coated rail with self lubricating Frelon Gold. Dampens vibration and tolerates shock loads. Will not rust. No metal to metal contact. No balls or rolling elements to trap contamination, skid or damage rail. Operation is consistent, smooth and quiet. Maintenance free. Used in packaging machines, medical equipment, wash-down and harsh environments.

Ball Transfer Units - Screw Stem - Brass and Aluminium

Search Rating: 65%

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.