BBM30 REID
Cross Referenced Part Numbers
Reid part number BBM-30Matches our part number
Max Static Load: 272. Bolt Hole Diameter (C): 13.5. Flange Diameter (A): 50.8.
Part Link: MB-0272-051
Retail Price: 0.00 (Each
)
Lower price for quantities
Stock: Pre-Order (due 3 weeks) Due dates are estimates only
Lower price for quantities
Stock: Pre-Order (due 3 weeks) Due dates are estimates only
Category Matches
Protective Packing and Sleeves
Sleeving - Mesh
Low cost protection for threaded and cylindrical parts
Elastic snug tight fit protective sleeve fits over straight, tapered or contoured parts. Made from polyethylene. Thickness of web approx 1.8mm. Sold per foot (300mm). Maximum contunuous roll is 100 feet (30 mtrs).
Linear Slides
Slides - Linear - Clean Room
Stainless Steel throughout (similar to 440C). Speed: 0.5 m/sec (30 m/min). Temperature: +100oC (Continuous), +140oC (Maximum). Life will be less than normal at +100oC and dimensions may change. Lateral Loading: Dynamic x 1.13 C - Static x 1.19 Co. Precision Linear Slide Unit is a compact linear motion rolling guide for limited stroke length.
You may also be interested in
Knobs Knurled
Knobs - Knurled Female - Plastic
Black ABS Plastic head. Temperature Range: -30oC to +140oC. This category may be available in the new MBA online store at Knobs - Knurled Female - Plastic.
Related Information:
Knobs Thumb
Knobs - Thumb Female
Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30oC to +140oC. This category may be available in the new MBA online store at Knobs - Thumb Female.
Related Information:
Knobs Wing
Knobs - Wing Male
Plastic (high grade gloss black phenolic) with Steel Insert. Temperature Range: -30oC to +140oC. This category may be available in the new MBA online store at Knobs - Wing Male.
Related Information:
O-Rings
O-Ring Cord
Nitrile, Fluoroelastomer and EPDM continuous length o-ring cord.
Nitrile: Temp Range: -30oC to +90oC / Fluoroelastomer: Temp Range -20oC to +240oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Nitrile: Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. Fluoroelastomer (Viton(R)): Suitable for synthetic and hydraulic fluids, strong acids, steam, many chemicals and many alkalis. This category may be available in the new MBA online store at O-Ring Cord.
Related Information:
Knobs Wing
Knobs - Wing Female - Contoured
Plastic (high grade gloss black phenolic) with Steel Insert. Temperature Range: -30oC to +140oC. This category may be available in the new MBA online store at Knobs - Wing Female - Contoured.
Related Information:
O-Rings
O-Rings - Nitrile Rubber
General purpose. Includes o-rings for dental handpiece applications.
Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. This category may be available in the new MBA online store at O-Rings - Nitrile Rubber.
Related Information:
Bearings Plastic
Bearings - Double Row Ball Semi Precision - Acetal with Glass Balls
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.
Related Information:
Knobs Star
Knobs - Star Female - Plastic
Also see lobe knobs
Plastic (high grade gloss black phenolic) knob with steel insert. Temperature Range: -30oC to +140oC. This category may be available in the new MBA online store at Knobs - Star Female - Plastic.
Related Information:
Knobs - Star Male - Plastic
Also see lobe knobs
Plastic (high grade gloss black phenolic) knob with steel insert. Temperature Range: -30oC to +140oC. This category may be available in the new MBA online store at Knobs - Star Male - Plastic.
Related Information:
Bearings Plastic
Bearings - Double Row Ball Semi Precision - Acetal with Stainless Balls
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.
Related Information:
O-Rings
O-Rings - Quad
Quadrings or quattrorings reduce the amount of squeeze needed for positive seal, reducing friction and extending seal life.
Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. Also known as quad rings. This category may be available in the new MBA online store at O-Rings - Quad.
Related Information:
Knobs Push Pull
Knobs - Push-Pull
Contoured knobs plated Steel threaded female inserts. Fitted with generous dome to shank ratios to accommodate both push and pull operations. Temperature Range: -30oC to +140oC. This category may be available in the new MBA online store at Knobs - Push-Pull.
Related Information:
Knobs Lever
Knobs - Lever Threaded Bore
Lever knobs with moulded female threads, ideal for direct attachment to operating levers. Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30oC to +140oC. All knobs are fitted with a brass female insert. This category may be available in the new MBA online store at Knobs - Lever Threaded Bore.
Related Information:
Knobs - Lever Through Bore
Lever knobs with moulded female threads, ideal for direct attachment to operating levers. Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30oC to +140oC. All knobs are fitted with a brass female insert. This category may be available in the new MBA online store at Knobs - Lever Through Bore.
Related Information:
Spring Motors
Spring Motor Assemblies - Open - RINO
Budget Assemblies. Average fatigue life of 5000 to 30000 cycles.
Springs : 301 Stainless Steel. Average fatigue life of 5,000 to 30,000 cycles. This category may be available in the new MBA online store at Spring Motor Assemblies - Open - RINO.
Oil Seals
Oil Seals - Nitrile Rubber
DIN 3760 - General purpose grease and oil sealing. Note - metal cased and rubber cased seals may be interchanged at our discretion. If one or the other is specifically required please let us know when ordering.
Operating Temp. Range: -30oC to +90oC. The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. This category may be available in the new MBA online store at Oil Seals - Nitrile Rubber.
Dental Handpiece Parts
3000 Siemens Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Fishing Reel Parts
30SW International Penn Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Bearings Plastic
Bearings - Plastic - Acetal with Glass Balls
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous. This category may be available in the new MBA online store at Bearings - Plastic - Acetal with Glass Balls.
Related Information:
Springs Die
Springs - Die - Imperial - Medium-Heavy Duty
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded red. Efficient operating range is 20 to 30 percent of the length. Maximum deflection is 37 percent of the length. This category may be available in the new MBA online store at Springs - Die - Imperial - Medium-Heavy Duty.
Related Information:
ZX 3010 Shimano Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Wire - 302 Stainless
302 Stainless Steel
This category may be available in the new MBA online store at Wire - 302 Stainless.
Related Information:
Top Air 300 Series W.H. Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Lid Stay - 304 Stainless - Satin Finish
15kg load capacity. Holds lid in fully opened position. Lift up to release.
This category may be available in the new MBA online store at Lid Stay - 304 Stainless - Satin Finish.
Screws - Countersunk - 304 Stainless - Philips
Flat Head Countersunk UNC - UNF - METRIC.
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Countersunk - 304 Stainless - Philips.
Related Information:
Screws - Countersunk - 304 Stainless - Slotted
Flat Head Countersunk UNC - UNF - METRIC.
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Countersunk - 304 Stainless - Slotted.
Related Information:
Keys - Woodruff - 303 Stainless Steel
This category may be available in the new MBA online store at Keys - Woodruff - 303 Stainless Steel.
Related Information:
Springs - Die - Imperial - Heavy Duty - Chrome Silicon
Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.
Colour coded gold. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 30 percent of the length. This category may be available in the new MBA online store at Springs - Die - Imperial - Heavy Duty - Chrome Silicon.
Related Information:
Collars - Shaft - Gripfast - 304 Stainless Steel
Self Locking - Quick Release.
304 Stainless Body, Retention Ring, Balls and Springs. This category may be available in the new MBA online store at Collars - Shaft - Gripfast - 304 Stainless Steel.
Related Information:
Catches - Roller
304 Stainless Steel and Polyurethane
This category may be available in the new MBA online store at Catches - Roller.
Plungers - Ball Threaded - 303 Stainless Steel - Nylon Balls
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Ball Threaded - 303 Stainless Steel - Nylon Balls.
Plungers - Ball Threaded - 303 Stainless Steel - Standard - Standard
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Ball Threaded - 303 Stainless Steel with Threadlock
With Long-Lok thread locking compound to prevent loosening
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Ball Threaded - 303 Stainless Steel with Threadlock.
Screws - Button - Socket - 304 Stainless
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380. This category may be available in the new MBA online store at Screws - Button - Socket - 304 Stainless.
Related Information:
Screws - Cap - Socket - 303-304 Stainless
UNC - UNF - METRIC - Stainless Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912. This category may be available in the new MBA online store at Screws - Cap - Socket - 303-304 Stainless.
Related Information:
Screws - Captive - Thumb - 303 Stainless
Knurled Head. This category may be available in the new MBA online store at Screws - Captive - Thumb - 303 Stainless.
Related Information:
Screws - Fillister Head - 304 Stainless - Philips
UNC Only
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Fillister Head - 304 Stainless - Philips.
Related Information:
Screws - Fillister Head - 304 Stainless - Slotted
Metric - UNC - UNF
Nuts sold seperately - See Nuts. DIN 84. This category may be available in the new MBA online store at Screws - Fillister Head - 304 Stainless - Slotted.
Related Information:
Screws - Countersunk - Socket - 304 Stainless
Flat Head Countersunk UNC - UNF - METRIC - Stainless Steel
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642. The thread length indicated is the minimum. Some batches may be produced with longer threaded sections or even full threaded shanks. This category may be available in the new MBA online store at Screws - Countersunk - Socket - 304 Stainless.
Related Information:
Screws - Hex Head - 304 Stainless - Standard
Metric - UNF - UNC
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Hex Head - 304 Stainless - Standard.
Related Information:
Screws - Pan Head - 303-304 Stainless - Philips
Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Pan Head - 303-304 Stainless - Philips.
Related Information:
Screws - Pan Head - 303-304 Stainless - Pozidrive
Metric Only
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Pan Head - 303-304 Stainless - Pozidrive.
Related Information:
Main Pages
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Miscellaneous Brands Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Screws PDF
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 153564 products in 2094 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
