Small Parts & Bearings - an MBA company

Searched For: BBF75 REID


Cross Referenced Part Numbers



KF064C-025-TPBR-P Reid part number BBF-75





Thread Size: 1/4-20 UNC (6.35mm). Diameter: 25.40. Thread Depth: -.

Retail Price: 0.00 (Each )     
Lower price for quantities     
Stock: Pre-Order (due 3 weeks)     
Due dates are estimates only     


Category Matches

Gearboxes Cross Axis


Gearboxes - Cross Axis - 90 x 75 x 32mm
Gearboxes - Cross Axis -  90 x  75 x  32mm

Also see combined categories:
All Cross Axis Gearboxes

Worm and Wormwheel box. 5.0 to 18.0Nm. 5:1 to 120:1 ratios. P40 and PF40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Related Information:


757 Lares Parts
757 Lares Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


7500 8500 Spinning Reel Penn Parts
7500 8500 Spinning Reel Penn Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


7500 Abu Garcia Parts
7500 Abu Garcia Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


5177597 GE Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Sprockets - 3.75 x 1.6mm - Simplex - Plastic
Sprockets -  3.75 x 1.6mm - Simplex - Plastic

Also see combined categories:
All Sprockets for Roller Chain

Nylon - Acetal - With and without bore inserts.

Match with series 3.75mm miniature plastic or stainless chain. This category may be available in the new MBA online store at Sprockets - 3.75 x 1.6mm - Simplex - Plastic.

Related Information:


Sprockets - 3.75 x 1.6mm - Simplex - Stainless Steel - Plain Bore
Sprockets -  3.75 x 1.6mm - Simplex - Stainless Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Miniature 3.75mm Pitch.

Match with 3.75mm simplex chain. This category may be available in the new MBA online store at Sprockets - 3.75 x 1.6mm - Simplex - Stainless Steel - Plain Bore.

Related Information:


Bushes - Plastic - Rulon J - Flanged
Bushes - Plastic - Rulon J - Flanged

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Max Load: 5.2 MPa (750 psi). Gold colour. Max surface speed: 2m/s. Max PV: 0.26 (Mpa x m/s)

Non Metallic Bushes. Excellent insulator. Nor suitable for steam or wet conditions. Not FDA compliant. Suitable for dry conditions or vacuum. 288 oC (550 Deg F) Maximum Working Temperature. Patented all polymeric PTFE compound which operates well against soft mating surfaces. Lowest co-efficient of friction in the Rulon(R) product range. This category may be available in the new MBA online store at Bushes - Plastic - Rulon J - Flanged.

Related Information:


Bushes - Plastic - Rulon J - Unflanged
Bushes - Plastic - Rulon J - Unflanged

Also see combined categories:
All Plastic Bushes
All Unflanged Plastic Bushes

Max Load: 5.2 MPa (750 psi). Gold colour. Max surface speed: 2m/s. Max PV: 0.26 (Mpa x m/s)

Non Metallic Bushes. Excellent insulator. Nor suitable for steam or wet conditions. Not FDA compliant. Suitable for dry conditions or vacuum. 288 oC (550 Deg F) Maximum Working Temperature. Patented all polymeric PTFE compound which operates well against soft mating surfaces. Lowest co-efficient of friction in the Rulon(R) product range. This category may be available in the new MBA online store at Bushes - Plastic - Rulon J - Unflanged.

Related Information:


Sprockets - 12.7 x 7.75mm - Duplex - Carbon Steel - Plain Bore
Sprockets - 12.7 x 7.75mm - Duplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.75mm duplex chain (08B-2 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. This category may be available in the new MBA online store at Sprockets - 12.7 x 7.75mm - Duplex - Carbon Steel - Plain Bore.

Related Information:


Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.75mm simplex chain (08B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs. This category may be available in the new MBA online store at Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore.

Related Information:


Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock
Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.75mm simplex chain (08B BS)

Taperlock Bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 08B - 1/2 inch. This category may be available in the new MBA online store at Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock.

Related Information:


Sprocket Plates - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.75mm simplex chain (08B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs.

Related Information:


Gear Racks - Flexible
Gear Racks - Flexible

Also see combined categories:
All Flexible Gear Racks

Blue acetal. Ideal for curved or irregular surfaces. Can fit a bent radius as small as 75mm.

20o Pressure Angle. Resistant to weak acids and alkalis, oil, grease, petrol, alcohol, ketones. Working temperature 100 Deg. C, Intermittent to 149 Deg. C. See optional rack clamps and guide rails. Longer lengths available on special order.


Pins - Coiled - Plain - Standard Duty
Pins - Coiled - Plain - Standard Duty

Also see combined categories:
All Coiled Pins

ASME B18.8.3M / ISO 8750 Standard Duty Spirol Pins. Coiled roll pin.

This category may be available in the new MBA online store at Pins - Coiled - Plain - Standard Duty.

Related Information:


Pins - Roll - Carbon Steel
Pins - Roll - Carbon Steel

Also see combined categories:
All Roll Pins

Plain carbon spring steel DIN1481/ISO8752.

Also known as sel-lok and bissell pins. This category may be available in the new MBA online store at Pins - Roll - Carbon Steel.

Related Information:


Pins - Roll - Zinc Plated
Pins - Roll - Zinc Plated

Also see combined categories:
All Roll Pins

Zinc plated spring steel DIN1481/ISO8752.

Also known as sel-lok and bissell pins. This category may be available in the new MBA online store at Pins - Roll - Zinc Plated.

Related Information:


Pins - Roll - Stainless Steel - 300 Grade
Pins - Roll - Stainless Steel - 300 Grade

Also see combined categories:
All Roll Pins

300 Grade Stainless DIN1481/ISO8752.

Also known as sel-lok and bissell pins. This category may be available in the new MBA online store at Pins - Roll - Stainless Steel - 300 Grade.

Related Information:


Pins - Roll - Stainless Steel - 420 Grade
Pins - Roll - Stainless Steel - 420 Grade

Also see combined categories:
All Roll Pins

420 grade stainless DIN1481/ISO8752.

Also known as sel-lok and bissell pins. This category may be available in the new MBA online store at Pins - Roll - Stainless Steel - 420 Grade.

Related Information:


Sprockets - Idler
Sprockets - Idler


Complete with Needle Roller or Ball Bearings. 3.75mm to 25.4mm pitch.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners. This category may be available in the new MBA online store at Sprockets - Idler.

Related Information:


Gears - Spur - 8DP - 14.5 Degree - Steel
Gears - Spur -   8DP - 14.5 Degree - Steel

Also see combined categories:
All 8DP Spur Gears

PCD = No. of Teeth x 3.175mm (1/8 in.). 14.5o Pressure Angle. Steel. DP stands for Diametrical Pitch and is an imperial measurement system.

8 Diametrical Pitch. Approx 9.98mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 8DP - 14.5 Degree - Steel.


Belts - Timing - 9.525mm Pitch - L - 12.7mm Wide
Belts - Timing -  9.525mm Pitch - L -  12.7mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:


Belts - Timing - 9.525mm Pitch - L - 19.1mm Wide
Belts - Timing -  9.525mm Pitch - L -  19.1mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:


Belts - Timing - 9.525mm Pitch - L - 25.4mm Wide
Belts - Timing -  9.525mm Pitch - L -  25.4mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:


Belts - Timing - 9.525mm Pitch - L - 38.1mm Wide
Belts - Timing -  9.525mm Pitch - L -  38.1mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:


Washers - Disc Spring - Ball Bearing Type
Washers - Disc Spring - Ball Bearing Type

Also see combined categories:
All Disc Springs

Specially designed for preloading the outer ring of ball bearings. C1075 steel. Includes disc springs to DIN 2093.

Ensures perfect bearing positioning with no sideways play. May be used to provide bearing preload. Load tolerance +/- 20% of load shown. This category may be available in the new MBA online store at Washers - Disc Spring - Ball Bearing Type.


Belts - Timing - 9.525mm Pitch - L Double Sided - 12.7mm Wide
Belts - Timing -  9.525mm Pitch - L Double Sided - 12.7mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:


Belts - Timing - 9.525mm Pitch - L Double Sided - 19.1mm Wide
Belts - Timing -  9.525mm Pitch - L Double Sided - 19.1mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:


Belts - Timing - 9.525mm Pitch - L Double Sided - 25.4mm Wide
Belts - Timing -  9.525mm Pitch - L Double Sided - 25.4mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:





Main Pages

About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 144275 products in 2044 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 144275 products in 2044 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.