Small Parts & Bearings - an MBA company

Ballscrew Thomson Saginaw Categories


Ball Screws Rolled


Ballscrew - Thomson Saginaw
Ballscrew - Thomson Saginaw

Also see combined categories:
All Ball Screws

Offer 90% efficiency converting rotary to linear motion with low coefficient of friction. Match all components within the Thomson Saginaw range only.

When replacing screws, hydraulics or pneumatics, they allow the use of smaller, less expensive drive motors and reduce the need for auxiliary equipment. Offer dependable accuracy and repeatability, Made off high quality alloy steel, hardened to Rockwell 56-60C. This category may be available in the new MBA online store at Ballscrew - Thomson Saginaw.


Ball Screw Accessories


Ballscrew - Thomson Saginaw - Accessories
Ballscrew - Thomson Saginaw - Accessories

Also see combined categories:
All Ball Screws

Wiper Kits and Flanges for Ball Nuts. Match all components within the Thomson Saginaw range only.

This category may be available in the new MBA online store at Ballscrew - Thomson Saginaw - Accessories.


Ballscrew - Thomson Saginaw - Nut
Ballscrew - Thomson Saginaw - Nut

Also see combined categories:
All Ball Screws

Ball Nuts to Suit Thomson Saginaw ball screws. Match all components within the Thomson Saginaw range only.

All Right hand thread only. This category may be available in the new MBA online store at Ballscrew - Thomson Saginaw - Nut.


Ballscrew - Nook Series - Flanges
Ballscrew - Nook Series - Flanges


Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

Carburised steel with ball tracks heated to RC 58-60. Protective black oxide finish. This category may be available in the new MBA online store at Ballscrew - Nook Series - Flanges.


Ballscrew - Nook Series - Right Hand
Ballscrew - Nook Series - Right Hand


Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

High quality alloy steel, induction hardened to RC 56-60. Protective black oxide finish. Lead accurate by at least 0.00083mm per mm. This category may be available in the new MBA online store at Ballscrew - Nook Series - Right Hand.


Ballscrew - Ground - Dia 4mm - Lead 1mm
Ballscrew - Ground - Dia 4mm - Lead 1mm

Also see combined categories:
All Ball Screws

Not for sale outside of Australia and New Zealand

This category may be available in the new MBA online store at Ballscrew - Ground - Dia 4mm - Lead 1mm.


Ballscrew - Nook Series - Nuts - Right Hand Thread - Double Circuit
Ballscrew - Nook Series - Nuts - Right Hand Thread - Double Circuit


Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

Carburised steel with ball tracks heated to RC 58-60. Protective black oxide finish.


Ballscrew - Nook Series - Nuts - Right Hand Thread - Single Circuit
Ballscrew - Nook Series - Nuts - Right Hand Thread - Single Circuit


Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

Carburised steel with ball tracks heated to RC 58-60. Protective black oxide finish.


Bearings - Linear - Ball - Thomson Precision Steel - Closed
Bearings - Linear - Ball - Thomson Precision Steel - Closed

Also see combined categories:
All Thomson Linear Ball Bearings

For running on shafts fixed at the ends.

This category may be available in the new MBA online store at Bearings - Linear - Ball - Thomson Precision Steel - Closed.

Related Information:












Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Narrow
Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Narrow


Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination. Thin dense chrome.

Related Information:


Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Standard
Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Standard


Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination. Thin dense chrome.

Related Information:


Rail Systems - Type 3 - Linear - Precision - Carriage - Carbon Steel - Narrow
Rail Systems - Type 3 - Linear - Precision - Carriage - Carbon Steel - Narrow


Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination.

Related Information:


Rail Systems - Type 3 -Linear - Precision - Carriage - Carbon Steel - Standard
Rail Systems - Type 3 -Linear - Precision - Carriage - Carbon Steel - Standard


Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination.

Related Information:


Rail Systems - Type 2 - Linear - Precision - Rails - Chrome Coated
Rail Systems - Type 2 - Linear - Precision - Rails - Chrome Coated


Match with carriage by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Rails are subjected to multiple straightening processes during and after grinding of the ball paths to ensure straight and accurate rails. This category may be available in the new MBA online store at Rail Systems - Type 2 - Linear - Precision - Rails - Chrome Coated.

Related Information:


Rail Systems - Type 3 - Linear - Precision - Rails - Carbon Steel
Rail Systems - Type 3 - Linear - Precision - Rails - Carbon Steel


Match with carriage by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Rails are subjected to multiple straightening processes during and after grinding of the ball paths to ensure straight and accurate rails. This category may be available in the new MBA online store at Rail Systems - Type 3 - Linear - Precision - Rails - Carbon Steel.

Related Information:


Housings - Bearing - Square - Miniature
Housings - Bearing - Square - Miniature


Aluminium housings to suit standard radial ball bearings.

Use with standard radial ball bearings. Bearing not included. Can be through screwed from the top using socket head cap screws. Can be bolted from the bottom using the pre-tapped holes. Made from Aluminium 6082-T6 Black Anodised.


Screws - Roof Bolt - Steel
Screws - Roof Bolt - Steel

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric and BSW only. Supplied with nut.

Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Roof Bolt - Steel.

Related Information:


Ball Transfer Units - Screw Stem - Brass and Aluminium
Ball Transfer Units - Screw Stem - Brass and Aluminium

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms. This category may be available in the new MBA online store at Ball Transfer Units - Screw Stem - Brass and Aluminium.


Ball Transfer Units - Screw Stem - Stainless - Precision
Ball Transfer Units - Screw Stem - Stainless - Precision

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms. This category may be available in the new MBA online store at Ball Transfer Units - Screw Stem - Stainless - Precision.


Ball Transfer Units - Screw Stem - Steel - Precision
Ball Transfer Units - Screw Stem - Steel - Precision

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms. This category may be available in the new MBA online store at Ball Transfer Units - Screw Stem - Steel - Precision.


Socket Set Screws - Rolling Ball Tip - Carbon Steel
Socket Set Screws - Rolling Ball Tip - Carbon Steel

Also see combined categories:
All Rolling Ball Tip Grub Screws
All Grub Screws

Rolling ball tip for locating into a hole

Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application. This category may be available in the new MBA online store at Socket Set Screws - Rolling Ball Tip - Carbon Steel.

Related Information:


Socket Set Screws - Rolling Ball Tip - Stainless Steel
Socket Set Screws - Rolling Ball Tip - Stainless Steel

Also see combined categories:
All Rolling Ball Tip Grub Screws
All Grub Screws

Rolling ball tip for locating into a hole

Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application. This category may be available in the new MBA online store at Socket Set Screws - Rolling Ball Tip - Stainless Steel.

Related Information:


Screws - Hex Head - Steel - Zinc Plated
Screws - Hex Head - Steel - Zinc Plated

Also see combined categories:
All Hex Head Screws

BSW and METRIC - Bolts

This category may be available in the new MBA online store at Screws - Hex Head - Steel - Zinc Plated.

Related Information:


Ball Buttons
Ball Buttons


Also known as striker bushings or ball plunger detents. Use with ball or bolt spring plungers for a hard wearing contact area.

Burnished ground hardened steel. This category may be available in the new MBA online store at Ball Buttons.


Tools - Screw Extractors
Tools - Screw Extractors

Also see combined categories:
All Tools

The quick and easy way to remove broken screws, bolts, pipes and studs.

Note! You will also need a drill bit of the correct size for each extractor. This category may be available in the new MBA online store at Tools - Screw Extractors.


Socket Set Screws - Flat Tip - Aligning - Carbon Steel
Socket Set Screws - Flat Tip - Aligning - Carbon Steel

Also see combined categories:
All Flat Aligning Tip Grub Screws
All Grub Screws

Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.

Also known as a flat ball tip set screw or a clamping screw. This category may be available in the new MBA online store at Socket Set Screws - Flat Tip - Aligning - Carbon Steel.

Related Information:


Socket Set Screws - Flat Tip - Aligning - Stainless Steel
Socket Set Screws - Flat Tip - Aligning - Stainless Steel

Also see combined categories:
All Flat Aligning Tip Grub Screws
All Grub Screws

Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.

Also known as a flat ball tip set screw or a clamping screw. This category may be available in the new MBA online store at Socket Set Screws - Flat Tip - Aligning - Stainless Steel.

Related Information:


Balls - Tooling - Two Piece - Construction - Steel
Balls - Tooling - Two Piece - Construction - Steel

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 1144 steel heat treated to 53-57 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft. Construction balls can be pulled into a hole or bushing from below without applying pressure on the ball by using a cap screw in the internally tapped shank.

Related Information:


Screws - Shoulder - Philips Head - Stainless
Screws - Shoulder - Philips Head - Stainless

Also see combined categories:
All Shoulder Screws

303 Stainless Steel

Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Philips Head - Stainless.


Screws - Shoulder - Slotted Head - Stainless
Screws - Shoulder - Slotted Head - Stainless

Also see combined categories:
All Shoulder Screws

303 Stainless Steel

Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Slotted Head - Stainless.


Screws - Shoulder - Socket Head - 303 Stainless
Screws - Shoulder - Socket Head - 303 Stainless

Also see combined categories:
All Shoulder Screws

Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Socket Head - 303 Stainless.


Screws - Shoulder - Socket Head - 316 Stainless
Screws - Shoulder - Socket Head - 316 Stainless

Also see combined categories:
All Shoulder Screws

Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Socket Head - 316 Stainless.


Screws - Shoulder - Socket Head - 416 Stainless
Screws - Shoulder - Socket Head - 416 Stainless

Also see combined categories:
All Shoulder Screws

Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Socket Head - 416 Stainless.


Screws - Shoulder - Socket Head - Carbon Steel
Screws - Shoulder - Socket Head - Carbon Steel

Also see combined categories:
All Shoulder Screws

Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Socket Head - Carbon Steel.


Screws - Shoulder - Slotted Shallow Head - Carbon Steel
Screws - Shoulder - Slotted Shallow Head - Carbon Steel

Also see combined categories:
All Shoulder Screws

Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Slotted Shallow Head - Carbon Steel.


Supports - Pedestal Two Bolt
Supports - Pedestal Two Bolt

Also see combined categories:
All Supports

For linear shafting.

Cast Aluminium or Malleable Iron. Clamping Screw (supplied) made of Steel. This category may be available in the new MBA online store at Supports - Pedestal Two Bolt.

Related Information:


Pins - Ball Lock - Flanged Receptacles
Pins - Ball Lock - Flanged Receptacles

Also see combined categories:
All Ball Lock Receptacles

Provide a permanent and proper mating hole for commercial and industrial type quick release ball lock pins.

Designed to be used on materials or in applications where the positive lock detent pin does not have anything to lock against. Pin does not protrude past the bottom of the receptacle so they are ideal for blind hole applications. 303 Stainless Steel. Mounted with screws, rivets or bolts. The quick release ball lock pins are inserted from the flanged end, and the ball extends into the wider opening at the top of the receptacle.

Related Information:


Housings - Bearing - Flanged - 2 Bolt Hole - W300
Housings - Bearing - Flanged - 2 Bolt Hole - W300

Also see combined categories:
All Housings with Integral Bearing

With integral self aligning plain bearing.

Housing: Igumid G. Ball: Highly wear resistant Iglidur W300. This category may be available in the new MBA online store at Housings - Bearing - Flanged - 2 Bolt Hole - W300.


Screws - Shoulder - Jig and Fixture - Steel
Screws - Shoulder - Jig and Fixture - Steel

Also see combined categories:
All Shoulder Screws

Used in construction of tool, jig and fixture work. 4140L heat treated steel with black oxide finish.

Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Jig and Fixture - Steel.


Mounts - Wedge - Heavy Duty
Mounts - Wedge - Heavy Duty

Also see combined categories:
All Wedge Mounts

For installation and precise leveling of heavy industrial machinery.

Three machined wedges are mounted and held together by a horizontal adjusting bolt. A lock screw ensures the mount in the leveled position. Keys in the sliding surface of the wedges ensure rigidity within the mount construction. A special opening allows for bolting of the machine to the floor. Maximum leveling is 6.35mm.

Related Information:


Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage
Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Undercarriage mounted two member slide. Friction brake allows drawer to come to a slow stop. Only one required per drawer. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). Shipped with a bracket and two plastic tracks.


Locknuts - Stainless Insert
Locknuts - Stainless Insert


Simplify the assembly and reduce costs involved in securing ball bearings. One piece item where the locking function is performed by a spring peened into the top of the nut.

Nut Body: Low Carbon Steel. Locking Insert: Stainless Steel Hardness HB 201-269. The spring bears on the flank of the shaft thread with force (P) generating reaction force (P’) in the screw threads with a resulting high friction torque (prevailing torque). Unique slim body design. Secure locking without keyway and tab washer. One piece construction reduces stock and allows simpler, quicker assembly. Simple infinite adjustment. Re-usable up to 100 times. Resists vibration and shock. Equally effective for rotation in either direction even with rapid reversals.

Related Information:


Slides - Drawer - Front Disconnect - Friction - 19mm Ext
Slides - Drawer - Front Disconnect - Friction - 19mm Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Friction brake allows drawer to come to a slow stop. Front disconnects by pulling firmly on the drawer until it releases. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). This category may be available in the new MBA online store at Slides - Drawer - Front Disconnect - Friction - 19mm Ext.


Slides - Drawer - Front Disconnect - Lever - Full Ext
Slides - Drawer - Front Disconnect - Lever - Full Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by lifting a lever lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). This category may be available in the new MBA online store at Slides - Drawer - Front Disconnect - Lever - Full Ext.


Wrench - Plunger
Wrench - Plunger


Provides fast installation and removal of ball, spring and stubby spring plungers with slots at the spring loaded end. Prevents damage that can occur when a standard screwdriver is used by providing a recess for the tip whilst the body is being rotated.

This category may be available in the new MBA online store at Wrench - Plunger.





Main Pages

About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 138615 products in 2015 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 138615 products in 2015 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.