Small Parts & Bearings - an MBA company

Balls Stainless Steel 440c Grade Categories


Balls Metallic


Balls - Stainless Steel - 440C Grade
Balls - Stainless Steel - 440C Grade

Also see combined categories:
All Metallic Balls

Hardness: Rockwell C: 55-60.

Tolerances available on request. AISI440C Stainless Steel.

Related Information:
AFBMA Ball Grades
Other Types of Balls
Balls Master Catalogue PDF


You may also be interested in

Rod Ends Stainless Steel


Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female
Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female

Also see combined categories:
All Female Rod Ends
All Stainless Steel Female Rod Ends

Also known as Heim Joints

Dimensions not shown are available on request.



Balls Metallic


Balls - Stainless Steel - 304 Grade
Balls - Stainless Steel - 304 Grade

Also see combined categories:
All Metallic Balls

A2 Grade. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs.

Tolerances available on request. Grade 100. Non annealed. Hardness: Rockwell C: 25-39. Specific Gravity: 7.916. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs. Note! Increase in magnetic permeability may occur due to the grinding process and can be relieved by heating to over 1000 oC.

Related Information:
AFBMA Ball Grades
Other Types of Balls
Balls Master Catalogue PDF


Balls - Stainless Steel - 316 Grade
Balls - Stainless Steel - 316 Grade

Also see combined categories:
All Metallic Balls

A4 Grade. Very low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities.

Tolerances available on request. Grade 100. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972. Low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities. Note! Increase in magnetic permeability may occur due to the grinding process and can be releived by heating to over 1000 oC.

Related Information:
AFBMA Ball Grades
Other Types of Balls
Balls Master Catalogue PDF


Balls - Stainless Steel - 316L Grade
Balls - Stainless Steel - 316L Grade

Also see combined categories:
All Metallic Balls

Easier to machine than standard 316 grade.

316L Stainless Steel has the same properties as 316, except that it has a lower carbon content. It is also easier to machine. Non-magnetic. Resistant to severe corrosive conditions. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972.

Related Information:
AFBMA Ball Grades
Other Types of Balls
Balls Master Catalogue PDF


Knobs Ball


Knobs - Ball - Threaded - Stainless Steel
Knobs - Ball - Threaded - Stainless Steel

Also see combined categories:
All Female Threaded Ball Knobs

303 stainless steel (European grade 1.4305)



Bearings 316 Stainless


Bearings - Ball - 316 Stainless Steel - Double Row - Open
Bearings - Ball - 316 Stainless Steel - Double Row - Open

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:
Tolerances
Standard Bearings PDF Catalogue
Precision Shafting To Suit Bearings


Bearings - Ball - 316 Stainless Steel - Single Row - Open
Bearings - Ball - 316 Stainless Steel - Single Row - Open

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:
Tolerances
Standard Bearings PDF Catalogue
Precision Shafting To Suit Bearings


Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:
Tolerances
Standard Bearings PDF Catalogue
Precision Shafting To Suit Bearings


Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:
Tolerances
Standard Bearings PDF Catalogue
Precision Shafting To Suit Bearings


Pins Ball Lock


Pins - Ball Lock - T-Handle - Industrial - Stainless Steel
Pins - Ball Lock - T-Handle - Industrial - Stainless Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Body and spindle 17-4 PH stainless steel. Ring and spring 17-7 MO stainless steel. Handle and collar are 300 grade stainless. Tee handle. Also called detent pins.

Related Information:
Master Pins Catalogue PDF


Pins - Ball Lock - L-Handle - Industrial - Steel
Pins - Ball Lock - L-Handle - Industrial - Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring. Also called detent pins.

Related Information:
Master Pins Catalogue PDF


Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium
Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring. Tee handle. Also called detent pins.

Related Information:
Master Pins Catalogue PDF


Pins - Ball Lock - Button Handle - Commercial
Pins - Ball Lock - Button Handle - Commercial

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Stainless steel commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed. Also called detent pins.

Economical. Aluminium handles. 360 Brass Button. 300 Grade stainless pin. Use industrial grade T handled pins when higher double shear strength is required.

Related Information:
Master Pins Catalogue PDF


Pins - Ball Lock - T-Handle - Commercial
Pins - Ball Lock - T-Handle - Commercial

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Stainless steel commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed. Tee handle. Also called detent pins.

Economical. Aluminium handles. 360 Brass Button. 300 Grade stainless pin. Use industrial grade T handled pins when higher double shear strength is required.

Related Information:
Master Pins Catalogue PDF


Rod Ends Stainless Steel


Rod Ends - Stainless Steel - Bronze Lined - Male
Rod Ends - Stainless Steel - Bronze Lined - Male

Also see combined categories:
All Male Rod Ends
All Stainless Steel Male Rod Ends

Also known as Heim Joints

Dimensions not shown are available on request. CFF.SS series are made to DIN 648K and ISO 6126JK.



Splined Shafts and Bushes


Splined Shafts - Stainless Steel
Splined Shafts - Stainless Steel

Also see combined categories:
All Splined Shafts

Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Related Information:
Unflanged Stainless Bushes to Suit
Combined Splined Bushes List


Bearings Housings


Housings - Bearing - Pillow Block - Miniature
Housings - Bearing - Pillow Block - Miniature

Spyraflo aluminium pillow block housings mounted with 440C stainless miniature bearings

No more need for expensive engineering of housings to suit your new applications. Fully greased Japanese 440C Grade corrosion resistant stainless steel ball bearings. Double shielded bearings to minimise contamination.

Related Information:
More Size Data


Strip


Strip - Stainless Steel
Strip - Stainless Steel

Also see combined categories:
All Metal Strip

430 Grade stainless steel strip



Pins General


Pins - Clik - Stainless Steel 316 Grade
Pins - Clik - Stainless Steel 316 Grade

Also see combined categories:
All Clik Lynch Pins

Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.

Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.

Related Information:
Master Pins Catalogue PDF


Pins Roll


Pins - Roll - Stainless Steel - 300 Grade
Pins - Roll - Stainless Steel - 300 Grade

Also see combined categories:
All Roll Pins

304 grade DIN1481.

Related Information:
Master Pins Catalogue PDF
Roll Pins Catalogue PDF


Pins - Roll - Stainless Steel - 420 Grade
Pins - Roll - Stainless Steel - 420 Grade

Also see combined categories:
All Roll Pins

420 grade DIN1481.

Related Information:
Master Pins Catalogue PDF
Roll Pins Catalogue PDF


Lifting Chain


Chain - Grade 50 Lifting - 316L Stainless Steel
Chain - Grade 50 Lifting - 316L Stainless Steel

Also see combined categories:
All Lifing Chain

Commonly used for commercial and marine applications. Approved for lifting.

Working loads are based on gradual pull not shock loads. Ensure all components in your assembly are overhead lifting rated and have the same working loads.



Washers Lock


Washers - Lock - Split - Stainless Steel
Washers - Lock - Split - Stainless Steel

Also see combined categories:
All Split Lock Washers
All Lock Washers

304 Grade Stainless Steel



Lifting Chain


Chain - Grade 40 High Test - 316L Stainless Steel
Chain - Grade 40 High Test - 316L Stainless Steel

Also see combined categories:
All Link Chain

Commonly used for commercial and marine applications. Not for lifting.



Allthread


Threaded Rod - Allthread - Stainless Steel - 316
Threaded Rod - Allthread - Stainless Steel - 316

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - 316 grade. Also known as booker rod.



Keys and Keysteel


Keysteel Lengths - Square - Stainless Steel
Keysteel Lengths - Square - Stainless Steel

Also see combined categories:
All Keysteel Lengths

303, 304 and 316 grade key steel

Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled.

Related Information:
Keysteel Catalogue PDF


Tooling Balls


Balls - Checking - Stainless Steel
Balls - Checking - Stainless Steel

Also see combined categories:
All Fixture and Checking Balls

440C Hardened to RC 55-58.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:
Balls Master Catalogue PDF


Balls - Fixture - Stainless Steel
Balls - Fixture - Stainless Steel

Also see combined categories:
All Fixture and Checking Balls

440C Hardened to RC 55-58.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:
Balls Master Catalogue PDF


Balls - Checking - Stainless Steel - With Tapped Shank
Balls - Checking - Stainless Steel - With Tapped Shank

Also see combined categories:
All Fixture and Checking Balls

440C Hardened to RC 55-58.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:
Balls Master Catalogue PDF


Latches Draw


Latches - Draw - Over Centre - 300 Grade Stainless Steel
Latches - Draw - Over Centre - 300 Grade Stainless Steel

Passivated stainless steel. Latches mount with M4 screws, No. 8 screws or 5/32 rivets. Type B keeper uses a countersunk screw.

Keepers included. Type SC-97533 has a hole for a padlock.



Nuts Lock


Nuts - Hexagonal - Binx - Stainless Steel 304
Nuts - Hexagonal - Binx - Stainless Steel 304

Also see combined categories:
All Lock Nuts

Manufactured from A2 302/304 grade stainless steel. The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.



Allthread


Threaded Rod - Allthread - Stainless Steel - 304
Threaded Rod - Allthread - Stainless Steel - 304

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - 303 and 304 grades. Also known as booker rod.



Washers Flat Metallic


Washers - Flat - Stainless Steel 304 - Commercial
Washers - Flat - Stainless Steel 304 - Commercial

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Related Information:
Washers and Spacers PDF Catalogue


Washers - Flat - Stainless Steel 316 - Commercial
Washers - Flat - Stainless Steel 316 - Commercial

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Related Information:
Washers and Spacers PDF Catalogue


Couplings Rigid


Couplings - Rigid - 1 Piece Clamp - Stainless Steel
Couplings - Rigid - 1 Piece Clamp - Stainless Steel

Also see combined categories:
All Rigid Couplings

303 Grade Stainless

Precision Machined. High torsional load. Non marring, easy to install and adjust. Use on hardened shafts, rigid clamp type design, easily machinable. Available with stepped bores and keyways on 5 week delivery.



Mounts Leveling


Mounts - Anti-Vibration - 303 Stainless Steel
Mounts - Anti-Vibration - 303 Stainless Steel

Corrosion resistant designed with high grade nitrile rubber and stainless steel.

Swivel movement plus or minus 7o for stable support on inclined floors. Nitrile rubber base helps ensure stability.



Spring Anchors


Anchors - Spring - Stainless Steel
Anchors - Spring - Stainless Steel

Also see combined categories:
All Spring Anchors

An economical way to secure the ends of extension springs, and provide easy adjustment.

300 Grade Stainless Steel.



Bearings Single Row Ball


Bearings - Ball - 440C Stainless
Bearings - Ball - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome

Stainless steel radial ball bearings

Standard single row radial ball bearings. Not all bearings are readily available. Please enquire by email if the item you require is not shown on our website.Not all bearings are readily available. Please enquire by email if the item you require is not shown on our website. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:
Tolerances
Standard Bearings PDF Catalogue
Precision Shafting To Suit Bearings


Collars




Shim


Shim and Foil - Stainless Steel
Shim and Foil - Stainless Steel

Also see combined categories:
All Shim
All Sheet

Precision stainless shim sheet. Very thin foil to thick sizes. Includes 416, 303 and 316 grades.

NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications.

Related Information:
See Assortment Kits for Shim Assortments


Bearings Flanged Ball


Bearings - Ball - Flanged - 440C Stainless
Bearings - Ball - Flanged - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Not all bearings are readily available. Please enquire by email if the item you require is not shown on our website. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:
Tolerances
Standard Bearings PDF Catalogue
Precision Shafting To Suit Bearings


Tooling Balls


Balls - Tooling - One Piece - Construction - Stainless Steel
Balls - Tooling - One Piece - Construction - Stainless Steel

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 440C Stainless Steel heat treated to 55-58 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm.

Related Information:
Balls Master Catalogue PDF


Balls - Tooling - One Piece - Standard - Stainless Steel - Press Fit
Balls - Tooling - One Piece - Standard - Stainless Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

440C Stainless Steel heat treated to 55-58 RC.

Related Information:
Balls Master Catalogue PDF


Balls - Tooling - One Piece - Standard - Stainless Steel - Slip Fit
Balls - Tooling - One Piece - Standard - Stainless Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

440C Stainless Steel heat treated to 55-58 RC.

Related Information:
Balls Master Catalogue PDF


Bearings Single Row Ball


Bearings - Ball - WIR - 440C Stainless
Bearings - Ball - WIR - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Stainless Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with extended inner ring (wide inner ring). Not all bearings are readily available. Please enquire by email if the item you require is not shown on our website. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:
Tolerances
Standard Bearings PDF Catalogue
Precision Shafting To Suit Bearings


Tooling Balls


Balls - Tooling - One Piece - Shoulder - Stainless Steel - Press Fit
Balls - Tooling - One Piece - Shoulder - Stainless Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 440C Stainless Steel heat treated to 55-58 RC.

Related Information:
Balls Master Catalogue PDF


Balls - Tooling - One Piece - Shoulder - Stainless Steel - Slip Fit
Balls - Tooling - One Piece - Shoulder - Stainless Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 440C Stainless Steel heat treated to 55-58 RC.

Related Information:
Balls Master Catalogue PDF


Bearings Flanged Ball


Bearings - Ball - Flanged - WIR - 440C Stainless
Bearings - Ball - Flanged - WIR - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all bearings are readily available. Please enquire by email if the item you require is not shown on our website. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:
Tolerances
Standard Bearings PDF Catalogue
Precision Shafting To Suit Bearings


Spring Assemblies


Spring Assemblies - Small Bracket - RINO
Spring Assemblies - Small Bracket - RINO

Spring: Stainless Steel 301 S21 Grade. Base: Aluminium Drum: High Impact Styrine. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring.

Related Information:
Technical


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts & Bearings offers 125736 products in 2919 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts & Bearings offers 125736 products in 2919 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.