Balls Plastic Polypropylene


Balls Plastic


Balls - Plastic - Polypropylene
Balls - Plastic - Polypropylene

Also see combined categories:
All Plastic Balls
All Non Metallic Balls

Excellent for liquid level float applications.

Tolerance and spherecity: up to and including 25.4mm diameter = +/-0.0508mm, over 25.4mm diameter +/-0.0762mm. Very resistant to most acids and alkalies. Excellent for liquid level float applications. Unpolished. Specific Gravity: 0.91.

Related Information:
AFBMA Ball Grades
Other Types of Balls

Balls Rubber


Balls - Rubber - Santoprene 40D
Balls - Rubber - Santoprene 40D

Also see combined categories:
All Rubber Balls
All Non Metallic Balls

A high performance thermoplastic created by cross linking EPDM rubber with Polypropylene. As an elastomer plastic it is flexible, light weight, and has very good abrasion resistance. It also has good resistance to many acids, bases and aqueous solutions.

It holds up well in both extreme hot and cold environments which can make it preferred over rubber. Common uses include; grips, knobs, handles, gaskets, and ball check valves. Specific Gravity .95 g/cc. Hardness, Shore 40D. Tensile Strength 3000 psi. Melting Point 410 F. Rohs Compliant. Not FDA compliant. This grade is slightly harder than the 87A grade. Colour usually red but some sizes are beige.

Related Information:
AFBMA Ball Grades
Other Types of Balls

Balls - Rubber - Santoprene 87A
Balls - Rubber - Santoprene 87A

Also see combined categories:
All Rubber Balls
All Non Metallic Balls

A high performance thermoplastic created by cross linking EPDM rubber with Polypropylene. As an elastomer plastic it is flexible, light weight, and has very good abrasion resistance. It also has good resistance to many acids, bases and aqueous solutions.

It holds up well in both extreme hot and cold environments which can make it preferred over rubber. Common uses include; grips, knobs, handles, gaskets, and ball check valves. Specific Gravity .96 g/cc. Hardness, Shore 87A. Tensile Strength 2550 psi. Melting Point 400 F. Rohs Compliant and FDA compliant. This grade is slightly softer than the 40D grade. Colour Beige.

Related Information:
AFBMA Ball Grades
Other Types of Balls

Bearings Acetal


Bearings - Polypropylene - Special Types
Bearings - Polypropylene - Special Types

Also see combined categories:
All Plastic Ball Bearings

Polypropylene is for special chemical compatibility usages. Please refer to a compatibility chart.

See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.


Knobs Tri


Knobs - Tri - Female
Knobs - Tri - Female

Also see combined categories:
All Tri Knobs
All Knobs

Black Polypropylene easy to grip knobs.


Knobs - Tri - Male
Knobs - Tri - Male

Also see combined categories:
All Tri Knobs
All Knobs

Black Polypropylene easy to grip knobs.


Balls Plastic


Balls - Plastic - Acetal
Balls - Plastic - Acetal

Also see combined categories:
All Plastic Balls
All Non Metallic Balls

High intensity strength, rigidity, outstanding resistance to abrasion and most solvents.

Tolerances available on request. Acetal Copolymer. High intensity strength, rigidity, outstanding resistance to abrasion and most solvents. Opaque White. Specific Gravity: 1.4.

Related Information:
AFBMA Ball Grades
Other Types of Balls

Balls - Plastic - Nylon
Balls - Plastic - Nylon

Also see combined categories:
All Plastic Balls
All Non Metallic Balls

Resists alkalies, weak acids and most organic solvents.

Tolerances available on request. Nylon (Polyamide 6/6). Resists alkalies, weak acids and most organic solvents. Low water absorption. Unpolished. Specific Gravity: 1.14.

Related Information:
AFBMA Ball Grades
Other Types of Balls

Balls - Plastic - PVC
Balls - Plastic -  PVC

Also see combined categories:
All Plastic Balls
All Non Metallic Balls

Polyvinyl chloride. PVC is a chemically stable material, which shows little change in molecular structure, and also exhibits little change in its mechanical strength.

Polyvinyl chloride is a widely used and inexpensive thermoplastic polymer. It is easily worked or machined and has good chemical and biological resistance. It is relatively hard and can be polished to a shine. Polyvinyl chloride is a widely used and inexpensive thermoplastic polymer. Heat Deflection Temperature 176 F / 80 C. Rockwell Hardness 115. Zero water absorption in 24 hours.

Related Information:
AFBMA Ball Grades
Other Types of Balls

Balls - Plastic - Bored
Balls - Plastic - Bored

Also see combined categories:
All Plastic Balls - Bored

Bored acetal balls as used in plastic rod ends.

Maintenance Free - Self Lubricating. Corrosion Resistant Iglidur W300 material. Suitable for rotating, oscillating and linear movement. Lightweight.

Related Information:
AFBMA Ball Grades
Other Types of Balls

Balls - Plastic - Acrylic
Balls - Plastic - Acrylic

Also see combined categories:
All Plastic Balls
All Non Metallic Balls

Resistance to weather and sunlight. Good abrasion resistance.

Diametrical tolerances typically +/- 0.08 or 0.13 mm depending on size. Acrylic (Methyl Methacrylate). Resistance to weather and sunlight. Good abrasion resistance. Water clear transparent. Polished. Ground and Polished.

Related Information:
AFBMA Ball Grades
Other Types of Balls

Balls - Plastic - PTFE
Balls - Plastic -  PTFE

Also see combined categories:
All Plastic Balls
All Non Metallic Balls

No water absorption. Temperatures up to 288 Deg C.

Tolerances available on request. Not affected by any known acids or alkalies. No water absorption. Temperatures up to 288 oC. Unpolished. Specific Gravity: 2.3.

Related Information:
AFBMA Ball Grades
Other Types of Balls

Balls - Plastic - Torlon
Balls - Plastic - Torlon

Also see combined categories:
All Plastic Balls
All Non Metallic Balls

TorlonTM 4301 Bearing Grade Balls. Grade 1.

Polyamide-imide (TorlonTM) Balls. Rockwell Hardness (Method A): E86 or M109-119. Specific Gravity: 1.38. Colour: Brown Opaque.

Related Information:
AFBMA Ball Grades
Other Types of Balls

Bearings for Housings


Bearings - Acetal with Glass Balls - For Plastic Housings
Bearings - Acetal with Glass Balls - For Plastic Housings

Also see combined categories:
All Acetal Bearings for Housings

Insert bearings ideal for wet conditions. Similar to standard wide inner ring bearings for P, F, Fl type housings.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:
Two Bolt Flanged Housings to Suit
Four Bolt Flanged Housings to Suit
Pillow Block Housings to Suit

Bearings - Acetal with Stainless Balls - For Plastic Housings
Bearings - Acetal with Stainless Balls - For Plastic Housings

Also see combined categories:
All Acetal Bearings for Housings

Insert bearings ideal for wet conditions. Similar to standard wide inner ring bearings for P, F, Fl type housings.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:
Two Bolt Flanged Housings to Suit
Four Bolt Flanged Housings to Suit
Pillow Block Housings to Suit

Knobs Ball


Knobs - Ball - Threaded - Plastic with Groove
Knobs - Ball - Threaded - Plastic with Groove

Also see combined categories:
All Female Threaded Ball Knobs

Black plastic ball knobs with a groove around the circumference. Brass threaded insert.


Knobs - Ball - Threaded - Plastic with Knurl
Knobs - Ball - Threaded - Plastic with Knurl

Also see combined categories:
All Female Threaded Ball Knobs

Brass threaded insert. Knurled circumference to assist with grip.


Plungers Ball


Plungers - Ball - Threaded - Acetal Body and Nylon Ball
Plungers - Ball - Threaded - Acetal Body and Nylon Ball

Also see combined categories:
All Threaded Ball Plungers

For use in plastic applications or when the application requires as few metal parts as possible.

Electrical isolation. Highly durable acetal body with stainless steel spring allows use in corrosive environments. Plunger wrenches will not work with these.


Plungers - Ball - Push Fit - Plastic Body - Plastic Ball
Plungers - Ball - Push Fit - Plastic Body - Plastic Ball

Also see combined categories:
All Push Fit Ball Plungers

Unthreaded. Plastic body and ball.

Body BSD: Pom (Delrin) BSD-SS: W.-Nr 1.4305 (303) Stainless Steel. Sleeve BSD: Thermoplastic BSD-SS: Stainless Steel. Ball: W.-Nr 1.4034 (420) Stainless Steel. Spring: W.-Nr 1.4310 (301) Stainless Steel. Surface Finish BSD: Ball hardened, bright BSD-SS: Bright.



Pins Ball Lock


Pins - Ball Lock - Ball Handle - Plastic Handle
Pins - Ball Lock - Ball Handle - Plastic Handle

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins. Also called detent pins.



Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  




Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top






Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 126266 products in 2937 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.