Small Parts & Bearings - an MBA company

Backup Rings Categories


Rings - Backup
Rings - Backup


Durometer 90 Nitrile Rubber back up rings.

This category may be available in the new MBA online store at Rings - Backup.


Rings - Split - Stainless Steel
Rings - Split - Stainless Steel

Also see combined categories:
All Split Rings

316 stainless steel wire rings.

This category may be available in the new MBA online store at Rings - Split - Stainless Steel.


Rings - Split - Zinc Plated Steel
Rings - Split - Zinc Plated Steel

Also see combined categories:
All Split Rings

Zinc plated hard drawn steel wire rings.

This category may be available in the new MBA online store at Rings - Split - Zinc Plated Steel.


Rings - Crescent
Rings - Crescent


Variation of an E-Clip with an open face. Also known as a C-Clip.

Narrow section height provides good clearance capabilities. Absence of teeth and deep set mean less thrust load ratings than e-clips. For best results install using the recommended applicator tool. This category may be available in the new MBA online store at Rings - Crescent.

Related Information:


Rings - D - Nickel Plated
Rings - D - Nickel Plated


Nickel plated D Rings

This category may be available in the new MBA online store at Rings - D - Nickel Plated.


Rings - Round - Nickel Plated
Rings - Round - Nickel Plated


Nickel plated round rings

This category may be available in the new MBA online store at Rings - Round - Nickel Plated.


Rings - Tolerance
Rings - Tolerance


Tolerance rings allow looser tolerances for assembly of parts such as bearings, pulleys and gears.

Allows looser tolerances of components. Ideal for mounting ball bearings. Useful for salvaging worn parts. Permits low cost assembly by eliminating the need for conventional fasteners. Use Torque Transfer figures for gears and pulleys. Non torque transfer figures are for bearing applications.


Wire Rings - External - Round Section
Wire Rings - External - Round Section

Also see combined categories:
All External Circlips

DIN7993A / RW / BN825. Retaining rings. Snap Rings (USA). Round section circlips.

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins. This category may be available in the new MBA online store at Wire Rings - External - Round Section.

Related Information:


Wire Rings - Internal - Round Section
Wire Rings - Internal - Round Section

Also see combined categories:
All Internal Circlips

Includes DIN7993B / RB / M1700 / BN826. Retaining rings. Snap Rings (USA). Round section circlips.

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins. This category may be available in the new MBA online store at Wire Rings - Internal - Round Section.

Related Information:


Spiral Rings - External - Heavy Duty - Carbon Steel
Spiral Rings - External - Heavy Duty - Carbon Steel

Also see combined categories:
All External Spiral Rings
All External Carbon Steel Spiral Rings

AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2. This category may be available in the new MBA online store at Spiral Rings - External - Heavy Duty - Carbon Steel.


Spiral Rings - External - Heavy Duty - Stainless Steel
Spiral Rings - External - Heavy Duty - Stainless Steel

Also see combined categories:
All External Spiral Rings
All External Stainless Steel Spiral Rings

AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2. This category may be available in the new MBA online store at Spiral Rings - External - Heavy Duty - Stainless Steel.


Spiral Rings - External - Light Duty - Carbon Steel
Spiral Rings - External - Light Duty - Carbon Steel

Also see combined categories:
All External Spiral Rings
All External Carbon Steel Spiral Rings

Includes series CE / VS / US - Spring Steel

Light duty single turn rings used in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CE, Smalley: VS, Spirolox and Ramsey: US.


Spiral Rings - External - Light Duty - Stainless Steel
Spiral Rings - External - Light Duty - Stainless Steel

Also see combined categories:
All External Spiral Rings
All External Stainless Steel Spiral Rings

Includes series CE / VS / US - Stainless Steel.

Light duty single turn rings used in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CE, Smalley: VS, Spirolox and Ramsey: US.


Spiral Rings - External - Medium Duty - Carbon Steel
Spiral Rings - External - Medium Duty - Carbon Steel

Also see combined categories:
All External Spiral Rings
All External Carbon Steel Spiral Rings

AE / WS / AS3218 / RS / MIL-R-27426A1 - Spring Steel

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AE, Smalley: WS, Spirolox and Ramsey: RS, Aerospace AS3218, MIL-R-27426A1. This category may be available in the new MBA online store at Spiral Rings - External - Medium Duty - Carbon Steel.


Spiral Rings - External - Medium Duty - Stainless Steel
Spiral Rings - External - Medium Duty - Stainless Steel

Also see combined categories:
All External Spiral Rings
All External Stainless Steel Spiral Rings

AE / WS / AS3218 / RS / MIL-R-27426A1 - Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AE, Smalley: WS, Spirolox and Ramsey: RS, Aerospace AS3218, MIL-R-27426A1. This category may be available in the new MBA online store at Spiral Rings - External - Medium Duty - Stainless Steel.


Spiral Rings - External - Medium-Heavy Duty - Carbon Steel
Spiral Rings - External - Medium-Heavy Duty - Carbon Steel

Also see combined categories:
All External Spiral Rings
All External Carbon Steel Spiral Rings

AME / WST / RST - Spring Steel

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AME, Smalley: WST, Spirolox and Ramsey: RST. This category may be available in the new MBA online store at Spiral Rings - External - Medium-Heavy Duty - Carbon Steel.


Spiral Rings - External - Medium-Heavy Duty - Stainless Steel
Spiral Rings - External - Medium-Heavy Duty - Stainless Steel

Also see combined categories:
All External Spiral Rings
All External Stainless Steel Spiral Rings

AME / WST / RST - Stainless Steel.

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AME, Smalley: WST, Spirolox and Ramsey: RST. This category may be available in the new MBA online store at Spiral Rings - External - Medium-Heavy Duty - Stainless Steel.


Spiral Rings - Internal - Heavy Duty - Carbon Steel
Spiral Rings - Internal - Heavy Duty - Carbon Steel

Also see combined categories:
All Internal Spiral Rings
All Internal Carbon Steel Spiral Rings

Includes AHI / WHM / AS3215 / RRN / MIL-R-27426B2 - Spring Steel

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2. This category may be available in the new MBA online store at Spiral Rings - Internal - Heavy Duty - Carbon Steel.


Spiral Rings - Internal - Heavy Duty - Stainless Steel
Spiral Rings - Internal - Heavy Duty - Stainless Steel

Also see combined categories:
All Internal Spiral Rings
All Internal Stainless Steel Spiral Rings

Includes AHI / WHM / AS3215 / Spirolox RRN / MIL-R-27426B2 - Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2. This category may be available in the new MBA online store at Spiral Rings - Internal - Heavy Duty - Stainless Steel.


Spiral Rings - Internal - Light Duty - Carbon Steel
Spiral Rings - Internal - Light Duty - Carbon Steel

Also see combined categories:
All Internal Spiral Rings
All Internal Carbon Steel Spiral Rings

Includes series CI / VH / UR - Spring Steel

Light duty rings for use in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CI, Smalley: VH, Spirolox and Ramsey: UR.


Spiral Rings - Internal - Light Duty - Stainless Steel
Spiral Rings - Internal - Light Duty - Stainless Steel

Also see combined categories:
All Internal Spiral Rings
All Internal Stainless Steel Spiral Rings

Includes series CI / VH / UR - Stainless Steel.

Light duty rings for use in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CI, Smalley: VH, Spirolox and Ramsey: UR.


Spiral Rings - Internal - Medium Duty - Carbon Steel
Spiral Rings - Internal - Medium Duty - Carbon Steel

Also see combined categories:
All Internal Spiral Rings
All Internal Carbon Steel Spiral Rings

Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Spring Steel

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AI, Smalley: WH, Spirolox and Ramsey: RR, Aerospace AS3217, MIL-R-27426B1. This category may be available in the new MBA online store at Spiral Rings - Internal - Medium Duty - Carbon Steel.


Spiral Rings - Internal - Medium Duty - Stainless Steel
Spiral Rings - Internal - Medium Duty - Stainless Steel

Also see combined categories:
All Internal Spiral Rings
All Internal Stainless Steel Spiral Rings

Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AI, Smalley: WH, Spirolox and Ramsey: RR, Aerospace AS3217, MIL-R-27426B1. This category may be available in the new MBA online store at Spiral Rings - Internal - Medium Duty - Stainless Steel.


Spiral Rings - Internal - Medium-Heavy Duty - Carbon Steel
Spiral Rings - Internal - Medium-Heavy Duty - Carbon Steel

Also see combined categories:
All Internal Spiral Rings
All Internal Carbon Steel Spiral Rings

Includes Series AMI / WHT / Spirolox RRT - Spring Steel

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT. This category may be available in the new MBA online store at Spiral Rings - Internal - Medium-Heavy Duty - Carbon Steel.


Spiral Rings - Internal - Medium-Heavy Duty - Stainless Steel
Spiral Rings - Internal - Medium-Heavy Duty - Stainless Steel

Also see combined categories:
All Internal Spiral Rings
All Internal Stainless Steel Spiral Rings

Includes Series AMI / WHT / Spirolox RRT - Stainless Steel.

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT. This category may be available in the new MBA online store at Spiral Rings - Internal - Medium-Heavy Duty - Stainless Steel.


Snap Rings - External - Basic
Snap Rings - External - Basic

Also see combined categories:
All External Snaprings

Includes series M3200 / SP / ESP / M2400 / SW snaprings. Similar to a circlip without the lugs.

Carbon sping steel. Used on the outside diameter of a bearing, shaft or similar equipment. This category may be available in the new MBA online store at Snap Rings - External - Basic.


Snap Rings - External - Stainless Steel
Snap Rings - External - Stainless Steel

Also see combined categories:
All External Snaprings

Includes series M3200 / SP / ESP / M2400 / SW snaprings. Similar to a circlip without the lugs.

301 S11/S22 Stainless Steel. Used on the outside diameter of a bearing, shaft or similar equipment. This category may be available in the new MBA online store at Snap Rings - External - Stainless Steel.


Snap Rings - Internal - Basic
Snap Rings - Internal - Basic

Also see combined categories:
All Internal Snaprings

M2300 / SB / ESB Snaprings. Like an internal circlip without the lugs.

Applications include gear systems, securing needle bearings and to act as spacers. Used on the inside bore diameter of a housing or similar. This category may be available in the new MBA online store at Snap Rings - Internal - Basic.


Plungers - Spring - Ring Handle - Locking - Stainless
Plungers - Spring - Ring Handle - Locking - Stainless

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Ring Handle - Locking - Stainless.


Plungers - Spring - Ring Handle - Locking - Steel
Plungers - Spring - Ring Handle - Locking - Steel

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Ring Handle - Locking - Steel.


Plungers - Spring - Ring Handle - Non Locking - Stainless
Plungers - Spring - Ring Handle - Non Locking - Stainless

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Ring Handle - Non Locking - Stainless.


Plungers - Spring - Ring Handle - Non Locking - Stainless-Phenolic
Plungers - Spring - Ring Handle - Non Locking - Stainless-Phenolic

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Ring Handle - Non Locking - Steel
Plungers - Spring - Ring Handle - Non Locking - Steel

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Ring Handle - Non Locking - Steel.


Plungers - Spring - Ring Handle - Non Locking - Steel-Phenolic
Plungers - Spring - Ring Handle - Non Locking - Steel-Phenolic

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Ring Handle - Non Locking - Steel-Phenolic.


Magnets - Ceramic Ring
Magnets - Ceramic Ring

Also see combined categories:
All Magnets
All Ceramic Magnets

This category may be available in the new MBA online store at Magnets - Ceramic Ring.


Push In Retaining Rings - Carbon Steel
Push In Retaining Rings - Carbon Steel


Thrust load shown is calculated for ideal conditions with mild steel bore. This category may be available in the new MBA online store at Push In Retaining Rings - Carbon Steel.


Push On Retaining Rings - Carbon Steel
Push On Retaining Rings - Carbon Steel

Also see combined categories:
All Push On Rings

M1465 / DTX / Seeger ZA and KS.

Thrust load shown is calculated for ideal conditions with mild steel shaft. If no thrust load is shown, testing is suggested. This category may be available in the new MBA online store at Push On Retaining Rings - Carbon Steel.


Push On Retaining Rings - Stainless Steel
Push On Retaining Rings - Stainless Steel

Also see combined categories:
All Push On Rings

Rotor Clip TY. Stainless Steel hardness HR15N 82.5-86

PH 15-7/17-7 Stainless Steel and 1.4310 Stainless Steel. This category may be available in the new MBA online store at Push On Retaining Rings - Stainless Steel.


Plungers - Spring - Pull Ring - Locking - Stainless-Acetal
Plungers - Spring - Pull Ring - Locking - Stainless-Acetal

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Pull Ring - Locking - Stainless-Acetal.


Plungers - Spring - Pull Ring - Locking - Steel-Acetal
Plungers - Spring - Pull Ring - Locking - Steel-Acetal

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Pull Ring - Locking - Steel-Acetal.


Plungers - Spring - Pull Ring - Non Locking - Stainless-Acetal
Plungers - Spring - Pull Ring - Non Locking - Stainless-Acetal

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Pull Ring - Non Locking - Stainless-Acetal.


Plungers - Spring - Pull Ring - Non Locking - Steel-Acetal
Plungers - Spring - Pull Ring - Non Locking - Steel-Acetal

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Pull Ring - Non Locking - Steel-Acetal.


Pins - Ball Lock - Ring Handle - Industrial - Stainless Steel
Pins - Ball Lock - Ring Handle - Industrial - Stainless Steel

Also see combined categories:
All Ball Lock Pins

17-4 PH or PH15-7MO stainless steel spindle and shank. Handles aluminium unless noted otherwise.

Positive lock detent pins. Aluminium handles. 300 Grade Stainless Components. 440C Stainless Balls. Ring dimensions may vary. Please contact us before purchasing if the ring dimensions are important to your application.

Related Information:


Bearings - Needle Roller - Inner Rings
Bearings - Needle Roller - Inner Rings


Hardened sleeves for needle roller bearings.

This category may be available in the new MBA online store at Bearings - Needle Roller - Inner Rings.

Related Information:


Bearings - Ball - With Snap Ring - Chrome Steel
Bearings - Ball - With Snap Ring - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Bearings with Snap Ring or Groove

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with snap ring. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - With Snap Ring - Chrome Steel.

Related Information:


Bearings - Ball - With Snap Ring Groove Only - Chrome Steel
Bearings - Ball - With Snap Ring Groove Only - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Bearings with Snap Ring or Groove

Chrome Steel Bearings with a Snap Ring Groove on the OD. No Snap Ring.

Single row radial ball bearings with snap ring groove. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - With Snap Ring Groove Only - Chrome Steel.

Related Information:


Shock Absorbers - Hydraulic - Lock Rings
Shock Absorbers - Hydraulic - Lock Rings


This category may be available in the new MBA online store at Shock Absorbers - Hydraulic - Lock Rings.


Bearings - Ball - WIR - With Snap Ring - Chrome Steel
Bearings - Ball - WIR - With Snap Ring - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - WIR - With Snap Ring - Chrome Steel.

Related Information:


Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel
Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel

Also see combined categories:
All Ball Lock Pins

17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel.

Positive lock detent pins. 300 Grade Stainless Handles. 300 Grade Stainless Components. 440C Stainless Balls. This category may be available in the new MBA online store at Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel.

Related Information:


Pins - Ball Lock - Shoulder Type - Ring Handle
Pins - Ball Lock - Shoulder Type - Ring Handle

Also see combined categories:
All Ball Lock Pins

Zinc plated C1144 pins with a shoulder that prevents the pin being inserted all the way to the handle.

Positive lock detent pins. Carbon steel components. This category may be available in the new MBA online store at Pins - Ball Lock - Shoulder Type - Ring Handle.

Related Information:





Main Pages

About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form McMaster Carr Cross Reference PDF Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 135332 products in 2018 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 135332 products in 2018 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.