B76 TORRINGTON

B76 TORRINGTON

Cross Referenced Part Numbers

Torrington part number B-76

Matches our part number

Shaft Diameter (d): 11.112. OD (D): 15.875. Width (B): 9.520.

Group: Bearings - Needle Roller without Inner Ring - Shell Type - Open Ends

Retail Price: 0.00 (Each )
Lower price for quantities
Stock: Pre-Order (due 2 weeks)
Due dates are estimates only

Category Matches

Pulleys Timing H Pitch 12.7mm

Pulleys - Timing 12.700mm Pitch H - 76.2mm Wide - Taperlock

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Belt width 76.2mm. Taperlock bush required for bore.

Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 12.700mm Pitch H - 76.2mm Wide - Taperlock.

Related Information:

Belts to suit 12.700 Pitch H Pulleys

Taperlock Bushings

Timing Pulleys Catalogue PDF

Pulleys - Timing 12.700mm Pitch H - 76.2mm Wide - Through Bore

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit H Series 12.700mm Pitch. Unfinished Bore.

Steel and Cast Iron. No grub screw. Hub requires drilling and tapping. Bore requires machining to finished size. This category may be available in the new MBA online store at Pulleys - Timing 12.700mm Pitch H - 76.2mm Wide - Through Bore.

Related Information:

Belts to suit 12.700 Pitch H Pulleys

Timing Pulleys Catalogue PDF

Belts Timing H Pitch 12.7mm

Belts - Inch Timing - 12.700mm Pitch - H - 76.1mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. This category may be available in the new MBA online store at Belts - Inch Timing - 12.700mm Pitch - H - 76.1mm Wide.

Related Information:

All 12.7mm H Pitch Through Bore Timing Pulleys - Choose width carefully

All 12.7mm H Pitch Taperlock Timing Pulleys - Choose width carefully

Timing Belts Catalogue PDF

You may also be interested in

Dental Handpiece Parts

Intra 24CN - 24LN - 553 5761 Kavo Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Oil Seals

Oil Seals - Fluoroelastomer Rubber

Also see combined categories:
All Oil Seals

DIN 3760 - High Temperature and chemical resistance.

Operating Temp. Range: -20^oC to +240^oC. The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. Suitable for synthetic and hydraulic fluids, strong acids, steam, many chemicals and many alkalis. This category may be available in the new MBA online store at Oil Seals - Fluoroelastomer Rubber.

Oil Seals - Nitrile Rubber

Also see combined categories:
All Oil Seals

DIN 3760 - General purpose grease and oil sealing. Note - metal cased and rubber cased seals may be interchanged at our discretion. If one or the other is specifically required please let us know when ordering.

Operating Temp. Range: -30^oC to +90^oC. The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. This category may be available in the new MBA online store at Oil Seals - Nitrile Rubber.

Sleeves - Hex Hole - Carbon Steel

Also see combined categories:
All Hex Hole Sleeves

Carefully turned to provide 0.076mm (0.003in) concentricity ID to OD. Round OD with with a uniform hex hole broached from one end to the other.

This category may be available in the new MBA online store at Sleeves - Hex Hole - Carbon Steel.

Sleeves - Square Hole - Plain - Carbon Steel

Also see combined categories:
All Square Hole Sleeves

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.

This category may be available in the new MBA online store at Sleeves - Square Hole - Plain - Carbon Steel.

Sleeves - Square Hole - Threaded - Carbon Steel

Also see combined categories:
All Square Hole Sleeves

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through and threaded internally at one end.

This category may be available in the new MBA online store at Sleeves - Square Hole - Threaded - Carbon Steel.

Sleeves - Hex Hole - Hardened

Also see combined categories:
All Hex Hole Sleeves

Pre hardened to Rockwell 23-30C. Carefully turned to provide 0.076mm (0.003in) concentricity ID to OD. Round OD with with a uniform hex hole broached from one end to the other.

This category may be available in the new MBA online store at Sleeves - Hex Hole - Hardened.

Sleeves - Square Hole - Plain - Hardened

Also see combined categories:
All Square Hole Sleeves

Pre hardened to Rockwell 23-30C. Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.

This category may be available in the new MBA online store at Sleeves - Square Hole - Plain - Hardened.

Balls - Ceramic - Sapphire - Synthetic

Also see combined categories:
All Ceramic Balls
All Non Metallic Balls

Extreme hardness, wear resistance, non-corrosiveness and chemical inertness.

Tolerances available on request. Grades shown are AFBMA / ISO3290-1. Specific Gravity: 3.98. Grade 25. Extreme hardness, wear resistance, non-corrosiveness and chemical inertness. High mechanical strength. Transparent (refractive index 1.76).

Related Information:

AFBMA Ball Grades

Ceramic Bearings PDF Download

Balls Master Catalogue PDF

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 153564 products in 2094 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.