Small Parts & Bearings - an MBA company

Automat frame kit side plate categories


Pulleys - Blocks - Eye - Swivel
Pulleys - Blocks - Eye - Swivel

Also see combined categories:
All Pulley Blocks

Steel side plates. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed. This category may be available in the new MBA online store at Pulleys - Blocks - Eye - Swivel.


Castors - Plate - Utility
Castors - Plate - Utility

Also see combined categories:
All Plate Type Castors

Swivel and Rigid Castors for Light duty applications. Plate mounted type.

This category may be available in the new MBA online store at Castors - Plate - Utility.


Sprocket Plates - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.75mm simplex chain (08B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs.

Related Information:


Sprocket Plates - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.85mm simplex chain (40-1 ASA)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs.

Related Information:


Sprocket Plates - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 19.05x11.68mm simplex steel chain (12B-1 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 12B - 3/4 inch.

Related Information:


Sprocket Plates - 6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates -  6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

25-1 ASA 1/4 Inch

Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch.

Related Information:


Sprocket Plates - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates -  9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 9.53x5.7mm steel chain (06B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch.

Related Information:


Mounts - Plate Style
Mounts - Plate Style

Also see combined categories:
All Plate Mounts

Vibration dampening

This category may be available in the new MBA online store at Mounts - Plate Style.

Related Information:


Sheet - Sintered Bronze
Sheet - Sintered Bronze

Also see combined categories:
All Sheet

Oil impregnated porous bronze sheet.

This category may be available in the new MBA online store at Sheet - Sintered Bronze.


Plungers - Indexing - Locking - With Mounting Plate - Steel
Plungers - Indexing - Locking - With Mounting Plate - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel. Includes rest position for plunger to stay in retracted position. This category may be available in the new MBA online store at Plungers - Indexing - Locking - With Mounting Plate - Steel.


Plungers - Indexing - Non Locking - With Mounting Plate - Steel
Plungers - Indexing - Non Locking - With Mounting Plate - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel. This category may be available in the new MBA online store at Plungers - Indexing - Non Locking - With Mounting Plate - Steel.


Mounts - Rectangular - 4 Bolt
Mounts - Rectangular - 4 Bolt

Also see combined categories:
All Rectangular Mounts

Rectangular elastomer component bonded with two steel plates.

Low installation height provides good stability. Effectively isolates against horizontal and vertical vibrations. High deflection capacity in horiziontal direction whilst deflection is low in vertical. Oil and grease resistant. Meets OSHA anchoring standards. Ideal use in presses, blowers, pumps, vibrators, rolling mills, crushers etc.

Related Information:


Mounts - Bonded - Tee Bushing - Centre Bolt
Mounts - Bonded - Tee Bushing - Centre Bolt


Vibration isolation for mobile and static applications involving plate clamping

Reduces structure borne noise and absorbs shock forces. Low profile height. This category may be available in the new MBA online store at Mounts - Bonded - Tee Bushing - Centre Bolt.

Related Information:


Inserts - Thread Repair - EZ-Lok - Selection Kits
Inserts - Thread Repair - EZ-Lok - Selection Kits

Also see combined categories:
All EZ Lok insert Kits

Contains a selection of E-Z Lok inserts

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Related Information:


Bumpers - Square and Rectangular
Bumpers - Square and Rectangular

Also see combined categories:
All Square Bumpers
All Bumpers

With drilled and counterbored holes for mounting. Neoprene only, no steel plate.

This category may be available in the new MBA online store at Bumpers - Square and Rectangular.


Bumpers - Square and Rectangular - Steel Plated - Neoprene
Bumpers - Square and Rectangular - Steel Plated - Neoprene

Also see combined categories:
All Square Bumpers
All Bumpers

With drilled and counterbored holes for mounting. Neoprene bonded to steel plate.

This category may be available in the new MBA online store at Bumpers - Square and Rectangular - Steel Plated - Neoprene.


Bumpers - Square and Rectangular - Steel Plated - Urethane
Bumpers - Square and Rectangular - Steel Plated - Urethane

Also see combined categories:
All Square Bumpers
All Bumpers

With drilled and counterbored holes for mounting. Urethane bonded to steel plate.

This category may be available in the new MBA online store at Bumpers - Square and Rectangular - Steel Plated - Urethane.


Catches - Snap In Style - Grabber -tm-
Catches - Snap In Style - Grabber -tm-


Fast economical installation.

Fits frames from 1.1 to 7.1mm thick. Installation hole size 15mm x 39.9mm. Push to close and pull to open. Spring loaded over centre action. Corrosion resistant black ABS with 303 stainless steel spring.


Catches - Side Mount - With Microswitch - Grabber -tm-
Catches - Side Mount - With Microswitch - Grabber -tm-


Mounts inside your enclosure. Installs either right or left side by inverting. Use 4 gauge screws or 1/8in (3.125mm) rivets to install.

Switch is designed to operate as an indicator light or form part of a non-safety related logic circuit. This category may be available in the new MBA online store at Catches - Side Mount - With Microswitch - Grabber -tm-.


Pins - Side Thrust - Double Sided - Steel Ball
Pins - Side Thrust - Double Sided - Steel Ball

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Steel ball and elasticised spring with black oxide coated steel body. This category may be available in the new MBA online store at Pins - Side Thrust - Double Sided - Steel Ball.

Related Information:


Pins - Side Thrust - Single Sided - Plastic Ball
Pins - Side Thrust - Single Sided - Plastic Ball

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Plastic ball and stainless spring with black oxide coated steel body. This category may be available in the new MBA online store at Pins - Side Thrust - Single Sided - Plastic Ball.

Related Information:


Pins - Side Thrust - Single Sided - Stainless Ball
Pins - Side Thrust - Single Sided - Stainless Ball

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Stainless ball and stainless spring with black oxide coated steel body. This category may be available in the new MBA online store at Pins - Side Thrust - Single Sided - Stainless Ball.

Related Information:


Pins - Side Thrust - Single Sided - Steel Ball
Pins - Side Thrust - Single Sided - Steel Ball

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Steel ball and elasticised spring with black oxide coated steel body. This category may be available in the new MBA online store at Pins - Side Thrust - Single Sided - Steel Ball.

Related Information:


Magnets - Alnico - Side Pole Rotator
Magnets - Alnico - Side Pole Rotator

Also see combined categories:
All Magnets
All Alnico Magnets

This category may be available in the new MBA online store at Magnets - Alnico - Side Pole Rotator.


Gear Racks - 96DP - Stainless - Side Holes
Gear Racks -  96DP - Stainless - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

96 DP. Approx 0.83mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 96DP - Stainless - Side Holes.


Bushings - Snap - Closed
Bushings - Snap - Closed


Quality UL approved 6/6 nylon with flammabilty rating of 94V-2. Open snap bushings are designed to provide protection from sharp edges where cable or hose runs through plate steel.

Similar to a bung, but designed with expanding catch for use in holes in sheet products. Also see grommets for a similar product made from rubber. This category may be available in the new MBA online store at Bushings - Snap - Closed.

Related Information:


Bearings - Self Clinching - Miniature - Self Aligning
Bearings - Self Clinching - Miniature - Self Aligning

Also see combined categories:
All Housings with Integral Bearing

Spyraflo pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs and simplify designs. Designed to press into a mounting plate as thin as 1.5mm.

Clinches into a plate bored to the required housing bore. Minimum plate thickness 1.6mm to no maximum. Maximum mounting hardness 100 Rockwell B. Operating temperature Minus 34 oC to Plus 121 Deg C. Compensates for mounting hole tolerances up to 0.07mm. 4.76 to 10mm bores. RoHS, REACH and SVHC environmental compliant.


Bushings - Snap - Open
Bushings - Snap - Open


Quality UL approved 6/6 nylon with flammabilty rating of 94V-2. Closed snap bushings are designed to keep out dust and other contaminants and protect from sharp edges where cable or hose used to run through a hole in plate steel.

Also called a dome plug. Also see grommets for a similar product made from rubber. This category may be available in the new MBA online store at Bushings - Snap - Open.

Related Information:


Belts - Vee - 12.5 x 9.0mm - A-4L
Belts - Vee - 12.5 x 9.0mm - A-4L

Also see combined categories:
All Vee Belts 12.5mm and 12.7mm Top Width

12.5mm Top Width x 9.0mm Height.

Sizes are nominal and may vary slightly. Items marked as Fractional Horsepower are designed for general purrpose low horseposer applications such as laundry machines, home workshop tools, small fans and blowers, garage equipment, small metal and woodworking tools etc. Belts shown as Fractional Horsepower type should not be used with reverse side idlers.

Related Information:


Belts - Vee - 10.0 x 5.5mm - M-3L
Belts - Vee - 10.0 x 5.5mm - M-3L

Also see combined categories:
All Vee Belts 8mm and 10mm Top Width

Miniature and small belts. 10.0mm Top Width x 5.5mm Height.

Sizes are nominal and may vary slightly. Items marked as Fractional Horsepower are designed for general purrpose low horseposer applications such as laundry machines, home workshop tools, small fans and blowers, garage equipment, small metal and woodworking tools etc. Belts shown as Fractional Horsepower type should not be used with reverse side idlers.

Related Information:


Slides - Drawer - Medium Duty - Lever Disconnect
Slides - Drawer - Medium Duty - Lever Disconnect

Also see combined categories:
All Drawer Slides

Used for shallow drawers, tool chests and medical carts.

Hold in detent. Full extension. 12.7mm Side Space. Includes 32mm hole pattern as well as traditional hole pattern.


Mounts - Leveling - Studded - Machine - Cushioned
Mounts - Leveling - Studded - Machine - Cushioned


Levelling adjusters. Reduces noise and vibration on heavy machinery, compressors and presses.

High strength aluminium alloy mounting plate is embedded in each pad with two tapped mounting holes for installation on all types of machines. The elastomer compound used in these pads is highly resistant to oil and chemicals. 1/2 UNC thread cold forged x 2.5 inch bolt supplied with each mount. Thousands of tiny suction pockets on the bottom prevent the machine from walking or slipping out of position. This category may be available in the new MBA online store at Mounts - Leveling - Studded - Machine - Cushioned.


Slides - Drawer - Heavy Duty - Lever Disconnect - Lock Out - Full Ext
Slides - Drawer - Heavy Duty - Lever Disconnect - Lock Out - Full Ext

Also see combined categories:
All Drawer Slides

Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.

Lever Disconnect. Non locking. 19.1mm side space.


Inserts - Thread Repair - EZ-Lok - Individual Kits
Inserts - Thread Repair - EZ-Lok - Individual Kits

Also see combined categories:
All EZ Lok insert Kits

Contains 20 inserts per kit along with a standard tap, drill bit and installation tool. Installation tool is not needed but will make multiple installations easier.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Related Information:


Mounts - Vibration - Isolation - Compression - Stainless Steel
Mounts - Vibration - Isolation - Compression - Stainless Steel


Compression shear mounts for harsh environments.

Excellent protection against shock vibration and noise4 in compression and shear applications. Developed especially for applications in harsh environments in food and pharmaceutical industries. High dampening characteristics. Stainless top plate is domed to guard against oil contamination. Low profile. Compact design. Elastomer insert is made from highly chemical resistant nitrile with good deflection properties. Concentric rings in the base of the insert firmly anchor machine to the floor.

Related Information:


Clamp Kits - Timing Belt
Clamp Kits - Timing Belt


Used for locking the ends of timing belt lengths used in linear applications

Suits single sided belts only. Aluminium. Screws, hex nuts and washers included. This category may be available in the new MBA online store at Clamp Kits - Timing Belt.

Related Information:


Assortment Kits - Various
Assortment Kits - Various


Clevis Pins - Keysteel - Rivet Nuts - Rivets - Shim - Screws - U Cushions - Taper Pins - Tubing - Washers

This category may be available in the new MBA online store at Assortment Kits - Various.


Inserts - Thread Repair - Keylocking Assortment Kits
Inserts - Thread Repair - Keylocking Assortment Kits

Also see combined categories:
All Keylocking Inserts and Kits

Also known as keenserts.

This category may be available in the new MBA online store at Inserts - Thread Repair - Keylocking Assortment Kits.

Related Information:


Ballscrew - Thomson Saginaw - Accessories
Ballscrew - Thomson Saginaw - Accessories

Also see combined categories:
All Ball Screws

Wiper Kits and Flanges for Ball Nuts. Match all components within the Thomson Saginaw range only.

This category may be available in the new MBA online store at Ballscrew - Thomson Saginaw - Accessories.


Bushings - Drill - Liner Type - Headless
Bushings - Drill - Liner Type - Headless

Also see combined categories:
All Drill Bushings

Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.

Used with fixed or slip renewable bushings. Permanently pressed into the jig plate creating a precise location point. Hardness: RC 62-64. This category may be available in the new MBA online store at Bushings - Drill - Liner Type - Headless.


Bushings - Drill - Slip - With Head
Bushings - Drill - Slip - With Head

Also see combined categories:
All Drill Bushings

Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.

Used with fixed or slip renewable bushings. Permanently pressed into the jig plate creating a precise location point. Hardness: RC 62-64. This category may be available in the new MBA online store at Bushings - Drill - Slip - With Head.


Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext
Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.


Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext
Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.


Inserts - Thread Repair - Recoil Starter Sets
Inserts - Thread Repair - Recoil Starter Sets

Also see combined categories:
All Recoil Inserts and Kits

Recoil inserts are screwed directly into an enlarged tapped hole. A tap and installation tool is included with these kits.

Stainless inserts. Contents: Ground intermediate (2nd) tap. Inserts. Installation/tang break off tool. Full instructions. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.


Bushings - Drill - Press-fit - Headless - Tungsten Carbide
Bushings - Drill - Press-fit - Headless - Tungsten Carbide

Also see combined categories:
All Drill Bushings

Designed to guide, position, and support the cutting tool in a metalworking jig.

Used with fixed or slip renewable bushings. Permanently pressed into the jig plate creating a precise location point. Hardness: RC 67-69. This category may be available in the new MBA online store at Bushings - Drill - Press-fit - Headless - Tungsten Carbide.


Inserts - Thread Repair - Recoil
Inserts - Thread Repair - Recoil

Also see combined categories:
All Recoil Inserts and Kits

Recoil inserts are screwed directly into an enlarged tapped hole. Replacement inserts for your kit.

Stainless inserts. Replacement Individual Inserts - Require full kit to obtain correct tap. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.


Collars - Shaft - Hinged - Stainless Steel
Collars - Shaft - Hinged - Stainless Steel

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:


Collars - Shaft - Hinged - Steel
Collars - Shaft - Hinged - Steel

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. Steel 12L14 (9SMn Pb36)

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:


Slides - Drawer - Medium Duty - Full Ext
Slides - Drawer - Medium Duty - Full Ext

Also see combined categories:
All Drawer Slides

Used for shallow drawers, tool chests and medical carts.

Hold in detent. 12.7mm Side Space. This category may be available in the new MBA online store at Slides - Drawer - Medium Duty - Full Ext.


Slides - Drawer - Medium Duty - Non-Disconnect
Slides - Drawer - Medium Duty - Non-Disconnect

Also see combined categories:
All Drawer Slides

Used for shallow drawers, tool chests and medical carts.

22.4mm over travel. 19.1mm Side Space. This category may be available in the new MBA online store at Slides - Drawer - Medium Duty - Non-Disconnect.





Main Pages

About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 138615 products in 2015 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 138615 products in 2015 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.