Attachments cable loop sleeves categories
Cable
Cable Attachments - Loop Sleeves
Use with synchromesh or standard miniature cable
This category may be available in the new MBA online store at Cable Attachments - Loop Sleeves.
Related Information:
Cable Attachments - Stop Sleeves
Use with synchromesh or standard miniature cable. Use a swaging tool to compress the stop sleeve over the end of the cable.
This category may be available in the new MBA online store at Cable Attachments - Stop Sleeves.
Related Information:
Cable Attachments - Thimbles - Stainless Steel
316 Stainless Steel. Use with synchromesh cable or standard miniature cable. Use with synchromesh or standard miniature cable
Thimbles provide loop support at higher loads and protect cables from wear when motion is present. Some thimbles may have open or uneven ends. This category may be available in the new MBA online store at Cable Attachments - Thimbles - Stainless Steel.
Related Information:
Attachments - Wire Rope Clips - Carbon Steel
Hot galvanised carbon steel
Furnished with hex nuts. Meet USA Fed. Spec. FF-C-450c, Type I, Class 1. This category may be available in the new MBA online store at Attachments - Wire Rope Clips - Carbon Steel.
Attachments - Wire Rope Clips - Stainless Steel
304 Stainless Steel
Furnished with hex nuts. Meet USA Fed. Spec. FF-C-450c, Type I, Class 1. This category may be available in the new MBA online store at Attachments - Wire Rope Clips - Stainless Steel.
Cable Attachments - Eyes
Use with synchromesh or standard miniature cable
Recommended dimensions after crimping:. 1.05 Cable - A=2.59. 2.06 Cable - A=2.64. 2.60 Cable - A=2.72. 3.40 Cable - A=2.80 (3.40 Cable must have outer helical wire removed prior to crimping).
Related Information:
Cable Attachments - Thimbles - Steel
Hot galvanised carbon steel. Use with synchromesh or standard miniature cable
Meets USA Fed. Spec. FF-T-276b for Type III thimbles. This category may be available in the new MBA online store at Cable Attachments - Thimbles - Steel.
Related Information:
Cable Attachments - Threaded Plugs
Use with synchromesh or standard miniature cable
F and L dimensions are obtained after swaging. Before swaging the fitting is round. This category may be available in the new MBA online store at Cable Attachments - Threaded Plugs.
Related Information:
Knobs - Lever Threaded Bore
Lever knobs with moulded female threads, ideal for direct attachment to operating levers. Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30oC to +140oC. All knobs are fitted with a brass female insert. This category may be available in the new MBA online store at Knobs - Lever Threaded Bore.
Related Information:
Knobs - Lever Through Bore
Lever knobs with moulded female threads, ideal for direct attachment to operating levers. Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30oC to +140oC. All knobs are fitted with a brass female insert. This category may be available in the new MBA online store at Knobs - Lever Through Bore.
Related Information:
Sleeves - Hex Hole - Carbon Steel
Carefully turned to provide 0.076mm (0.003in) concentricity ID to OD. Round OD with with a uniform hex hole broached from one end to the other.
This category may be available in the new MBA online store at Sleeves - Hex Hole - Carbon Steel.
Sleeves - Hex Hole - Hardened
Pre hardened to Rockwell 23-30C. Carefully turned to provide 0.076mm (0.003in) concentricity ID to OD. Round OD with with a uniform hex hole broached from one end to the other.
This category may be available in the new MBA online store at Sleeves - Hex Hole - Hardened.
Sleeves - Square Hole - Plain - Carbon Steel
Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.
This category may be available in the new MBA online store at Sleeves - Square Hole - Plain - Carbon Steel.
Sleeves - Square Hole - Plain - Hardened
Pre hardened to Rockwell 23-30C. Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.
This category may be available in the new MBA online store at Sleeves - Square Hole - Plain - Hardened.
Sleeves - Square Hole - Threaded - Carbon Steel
Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through and threaded internally at one end.
This category may be available in the new MBA online store at Sleeves - Square Hole - Threaded - Carbon Steel.
Couplings - Sleeves Only - Geargrip - Precision
Match with hubs from hubs category
This category may be available in the new MBA online store at Couplings - Sleeves Only - Geargrip - Precision.
Related Information:
Couplings - Sleeves Only - Crowned Tooth Gear
Match with hubs from the hubs category
+/- 1.02 mm Axial Displacement. 0.41mm Parallel offset per hub. 1o Angular Displacement. Free axial movement. 19.55 to 88 Nm. 8500 to 14000 rpm. High torque / low inertia.
Related Information:
Shaftloc-tm Sleeves - Single Ended
Simple effective way to lock components onto shafts.
416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened. This category may be available in the new MBA online store at Shaftloc-tm Sleeves - Single Ended.
Related Information:
Sleeving - Mesh
Low cost protection for threaded and cylindrical parts
Elastic snug tight fit protective sleeve fits over straight, tapered or contoured parts. Made from polyethylene. Thickness of web approx 1.8mm. Sold per foot (300mm). Maximum contunuous roll is 100 feet (30 mtrs).
Couplings - Geargrip Hubs - Precision
Match with sleeves from sleeves category
This category may be available in the new MBA online store at Couplings - Geargrip Hubs - Precision.
Related Information:
Bearings - Needle Roller Inner Rings
Hardened sleeves for needle roller bearings.
This category may be available in the new MBA online store at Bearings - Needle Roller Inner Rings.
Related Information:
Couplings - Crowned Tooth Gear - Hubs Only
Match with sleeves from the sleeves category
+/- 1.02 mm Axial Displacement. 0.41mm Parallel offset per hub. 1o Angular Displacement. Free axial movement. 19.55 to 88 Nm. 8500 to 14000 rpm. High torque / low inertia.
Related Information:
Rollers - Urethane - Lengths
Low cost alternative for making your own wheels, castors, rollers, sheaves etc. Urethane rod with dual hardness. Harder inner sleeve with softer outside for use as a roller.
Blue outer tyre 90A Durometer bonded to a hard brown 75D Durometer inner sleeve. This results in a hard anti friction bearing surface inside with a soft tyre outside. The roller can be cut and machined to suit your purposes. Testing for your application is recommended. This category may be available in the new MBA online store at Rollers - Urethane - Lengths.
Related Information:
Cable - Miniature - Coated
Lengths will be supplied continuous to a maximum of 3mtrs (ie, 10 x 300mm supplied as 3mtr length)
Recommended that nylon coating is stripped prior to swaging. Sold per length. Multiple quantities will be supplied in a continuous length up to 3mtr maximum. Also called bowden cable. This category may be available in the new MBA online store at Cable - Miniature - Coated.
Related Information:
Cable - Miniature - Uncoated
Lengths will be supplied continuous to a maximum of 3mtrs (ie, 10 x 300mm supplied as 3mtr length)
Sold per length. Multiple quantities will be supplied in a continuous length up to 3mtr maximum. Also called bowden cable. This category may be available in the new MBA online store at Cable - Miniature - Uncoated.
Related Information:
Ties - Cable - Standard
Nylon cable ties.
This category may be available in the new MBA online store at Ties - Cable - Standard.
Ties - Cable - With Mounting Holes
Cable ties with screw mounting holes.
This category may be available in the new MBA online store at Ties - Cable - With Mounting Holes.
Snaps - Spring - Interlocking - Style 1
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
This category may be available in the new MBA online store at Snaps - Spring - Interlocking - Style 1.
Snaps - Spring - Interlocking - Style 2
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
This category may be available in the new MBA online store at Snaps - Spring - Interlocking - Style 2.
Snaps - Spring - Interlocking - Style 3
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
This category may be available in the new MBA online store at Snaps - Spring - Interlocking - Style 3.
Plungers - Ball Push Fit - 303 Stainless Steel
Unthreaded
Body BSD: Pom (Delrin) BSD-SS: W.-Nr 1.4305 (303) Stainless Steel. Sleeve BSD: Thermoplastic BSD-SS: Stainless Steel. Ball: W.-Nr 1.4034 (420) Stainless Steel. Spring: W.-Nr 1.4310 (301) Stainless Steel. Surface Finish BSD: Ball hardened, bright BSD-SS: Bright.
Plungers - Ball Push Fit - Plastic Body - Plastic Ball
Unthreaded. Plastic body and ball.
Body BSD: Pom (Delrin) BSD-SS: W.-Nr 1.4305 (303) Stainless Steel. Sleeve BSD: Thermoplastic BSD-SS: Stainless Steel. Ball: W.-Nr 1.4034 (420) Stainless Steel. Spring: W.-Nr 1.4310 (301) Stainless Steel. Surface Finish BSD: Ball hardened, bright BSD-SS: Bright.
Grommets - Rubber - EPDM - Standard
EPDM Rubber Grommets
50 +/-5 Durometer. Easy to install. Good Vibration and Shock Control. Protects Wire, Cable and Hoses. Also see snap bushings for a hard plastic product serving a similar purpose.
Related Information:
Grommets - Rubber - Natural - Standard
Natural Rubber Grommets
50 +/-5 Durometer. Easy to Install. Good Vibration and Shock Control. Protects Wire, Cable and Hoses. Also see snap bushings for a hard plastic product serving a similar purpose.
Related Information:
Bushings - Snap - Closed
Quality UL approved 6/6 nylon with flammabilty rating of 94V-2. Open snap bushings are designed to provide protection from sharp edges where cable or hose runs through plate steel.
Similar to a bung, but designed with expanding catch for use in holes in sheet products. Also see grommets for a similar product made from rubber. This category may be available in the new MBA online store at Bushings - Snap - Closed.
Related Information:
Magnets - Cup Assemblies - Loop
Ideal for hanging signs and lights, retrieving steel items from tanks, vats, bins etc.
Plated cup with a 9.525mm ID loop. This category may be available in the new MBA online store at Magnets - Cup Assemblies - Loop.
Bushings - Snap - Open
Quality UL approved 6/6 nylon with flammabilty rating of 94V-2. Closed snap bushings are designed to keep out dust and other contaminants and protect from sharp edges where cable or hose used to run through a hole in plate steel.
Also called a dome plug. Also see grommets for a similar product made from rubber. This category may be available in the new MBA online store at Bushings - Snap - Open.
Related Information:
Collars - Shaft - Gripfast - ABS Plastic
Self Locking - Quick Release.
265 kg Load Capacity (600 lbs). ABS Plastic Inner Body and Outer Sleeve. Steel Retention Ring, Balls and Springs. This category may be available in the new MBA online store at Collars - Shaft - Gripfast - ABS Plastic.
Related Information:
Springs - Drawbar - Stainless Steel
Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.
This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring. This category may be available in the new MBA online store at Springs - Drawbar - Stainless Steel.
Related Information:
Springs - Drawbar - Zinc Plated
Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.
This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring. This category may be available in the new MBA online store at Springs - Drawbar - Zinc Plated.
Related Information:
Plungers - Ball Threaded - With Limit Switch
Suitable for locking and releasing a device by using a built-in electrical switch. Stainless steel spring, nickel plated body, hardened steel ball.
Supply Cable : Grey for normally open contacts, black for normally closed. Oil resistant. Max tensile load 20N. Working Temperature: -10 deg C to 80 deg C. Electrical Supply : 20 mA DC Max. Switching load recommended 5-10 mA. Voltage : 12-24V Supply Cable 3mm - 2 Phase, 2 metres long. Safety Standard : IP40 Average Switch Life Span : 3 milliion switchings.
Housings - Tapped Base - Thermoplastic with Chrome Steel Bearing
Thermoplastic housed units offer a more favourable economic choice. Hard chrome inserts offer an intermediate level of corrosion resistance.
Operating temperature minus 20 oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel.
Housings - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing
Thermoplastic housed units offer a more favourable economic choice. Hard chrome inserts offer an intermediate level of corrosion resistance.
Operating temperature minus 20 oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel.
Inserts - Rivet Nuts - Klik - Threadsert
Individual Inserts for use with the Klik Thread Setter Tool
These threaded inserts can be used in blind or through hole applications. Can be used in almost any material over 2.38mm thick. As the insert is installed the threaded section is completely swaged into the sleeve portion of the hole, permitting them to be used with grade 8 screws. The installation hole size is determined by the density of the parent material. Can be pressed or otherwise compressed manually with a hammer for quick installation jobs in sheet material. Tools are available for assembly in blind holes or production assembly. Email us for a price on tools.
Shafts - Flexible - Coupling Ends - Open - Mild Steel
Flexible shafting with coupling ends ready to attach to a fixed shaft.
1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm. This category may be available in the new MBA online store at Shafts - Flexible - Coupling Ends - Open - Mild Steel.
Related Information:
Pulleys - Timing 3.000mm Pitch HTD - 9mm Wide - Plastic - Hubless
Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Moulded single or double flange. No hub.
Suitable for use with shaftloc sleeves. This category may be available in the new MBA online store at Pulleys - Timing 3.000mm Pitch HTD - 9mm Wide - Plastic - Hubless.
Related Information:
Housings - Tapped Base - Thermoplastic with Stainless Bearing
Thermoplastic housed units offer a more favourable economic choice. Stainless steel bearings offer a high level of corrosion resistance and all metal parts are made from either 302, 304 or 440C stainless steel.
Operating temperature minus 20 oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel. Food grade.
Housings - 2 Bolt Flange - Thermoplastic with Stainless Bearing
Thermoplastic housed units offer a more favourable economic choice. Stainless steel bearings offer a high level of corrosion resistance and all metal parts are made from either 302, 304 or 440C stainless steel.
Operating temperature minus 20 oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel. Food Grade.
Wire Rings - External - Round Section
DIN7993A / RW / BN825. Retaining rings. Snap Rings (USA). Round section circlips.
Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins. This category may be available in the new MBA online store at Wire Rings - External - Round Section.
Related Information:
Wire Rings - Internal - Round Section
Includes DIN7993B / RB / M1700 / BN826. Retaining rings. Snap Rings (USA). Round section circlips.
Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins. This category may be available in the new MBA online store at Wire Rings - Internal - Round Section.
Related Information:
Main Pages
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Miscellaneous Brands Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Screws PDF
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 153564 products in 2094 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
