Small Parts & Bearings - an MBA company

A33BLS SEEGER


Cross Referenced Part Numbers



CCE-03300-C Seeger part number A33-BLS





Shaft Diameter (Ds): 33.00. Groove Dia. (Dg): 31.30. Clip Thickness (T): 1.50.

Online Price: 0.00     
Stock: Pre-Order (due 4 weeks)     
Due dates are estimates only     


Category Matches

Circlips


Circlips - Internal - Tabbed
Circlips - Internal - Tabbed

Also see combined categories:
All Internal Circlips

DIN984 / D2000 / Seeger JK. Retaining rings. Snap Rings (USA).

Internal tabs are concentrically positioned for a concealed assembly. Tabs act as spacers for securing machine components.

Related Information:


Clips


Push On Retaining Rings - Carbon Steel
Push On Retaining Rings - Carbon Steel

Also see combined categories:
All Push On Rings

M1465 / DTX / Seeger ZA and KS.

Thrust load shown is calculated for ideal conditions with mild steel shaft. If no thrust load is shown, testing is suggested.


Circlips


Circlips - External - Grooveless
Circlips - External - Grooveless

Also see combined categories:
All External Circlips

Includes MIL-R-21248/MS 90707 - Styles M1440 / Ellison GR / Seeger G and GA. Retaining rings. Snap Rings (USA).

Reusable tapered section rings for grooveless shafts like plastics, tubes or castings. Can be used where adjustable ring placement is desired - like progressively tightening a compression spring.

Related Information:


Circlips - Internal - Standard - Carbon Steel
Circlips - Internal - Standard - Carbon Steel

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).

Plain carbon steel. Tolerances on request.

Related Information:


Circlips - Internal - Standard - Stainless Steel
Circlips - Internal - Standard - Stainless Steel

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. PH15-7 Mo Stainless Steel. Retaining rings. Snap Rings (USA).

PH15-7 Mo Stainless Steel. Tolerances on request.

Related Information:


Circlips - Internal - Standard - Zinc Plated
Circlips - Internal - Standard - Zinc Plated

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).

Zinc plated carbon steel. Tolerances on request.

Related Information:


330E Lares Parts
330E Lares Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


633D Kavo Parts
633D Kavo Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Pins - Dowel - Standard - 303-304 Stainless - Chamfered End
Pins - Dowel - Standard - 303-304 Stainless - Chamfered End

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - 303/304 Grade Stainless - DIN6325, ISO2338, ISO 8734

Note! Type 2 pins may be supplied in lieu of type 1 pins. Also known as parallel pins.

Related Information:


Pins - Dowel - Standard - 303-304 Stainless - Rounded Both Ends
Pins - Dowel - Standard - 303-304 Stainless - Rounded Both Ends

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - 303/304 Grade Stainless- DIN7

Rounded end dowel pins are measured from the start of the edge rounding. This allows the pin to completely fill the hole after you grind off the rounded end. Diameter tolerances are m6. Also known as parallel pins.

Related Information:


Screws - Pan Head - 303-304 Stainless - Philips
Screws - Pan Head - 303-304 Stainless - Philips

Also see combined categories:
All Machine Screws

Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.

Nuts sold seperately - See Nuts.

Related Information:


Screws - Pan Head - 303-304 Stainless - Pozidrive
Screws - Pan Head - 303-304 Stainless - Pozidrive

Also see combined categories:
All Machine Screws

Metric Only

Nuts sold seperately - See Nuts.

Related Information:


Screws - Pan Head - 303-304 Stainless - Slotted
Screws - Pan Head - 303-304 Stainless - Slotted

Also see combined categories:
All Machine Screws

Metric Only

Nuts sold seperately - See Nuts.

Related Information:


Spacers - Hex - Threaded - 303-304 Stainless Steel
Spacers - Hex - Threaded - 303-304 Stainless Steel

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.



Pins - Ball Lock - Keyring Style - 303-304 Stainless Steel
Pins - Ball Lock - Keyring Style - 303-304 Stainless Steel

Also see combined categories:
All Ball Lock Pins

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.

Positive lock detent pins. 300 Grade Stainless Handles. 300 Grade Stainless Components. 440C Stainless Balls.

Related Information:


Workwheel Black and Decker Parts
Workwheel Black and Decker Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Housings - Pillow Block - Self Aligning - Needle Roller
Housings - Pillow Block - Self Aligning - Needle Roller

Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with self aligning needle roller bearings.

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Related Information:


Housings - Pillow Block - Self Aligning - Sintered Bronze
Housings - Pillow Block - Self Aligning - Sintered Bronze

Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with porous sintered bronze

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Related Information:


Housings - Pillow Block - Washdown
Housings - Pillow Block - Washdown

Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo electroless nickel plated aluminium housing with stainless steel coated self aligning acetal bearings.

See links at bottom of web page for more information. +/- 5% Static Alignment. Electroless nickel plated aluminium housing. Corrosion Resistant. Light weight.

Related Information:


Cross Blocks - Heavy Duty - One Knob One Nut
Cross Blocks - Heavy Duty - One Knob One Nut

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.


Cross Blocks - Heavy Duty - Two Knobs
Cross Blocks - Heavy Duty - Two Knobs

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.


Cross Blocks - Heavy Duty - Two Nuts
Cross Blocks - Heavy Duty - Two Nuts

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.


Knobs - Cross - Blind - Female
Knobs - Cross - Blind - Female

Also see combined categories:
All Cross Knobs
All Knobs


Related Information:


Knobs - Tri - Blind Hole
Knobs - Tri - Blind Hole

Also see combined categories:
All Tri Knobs
All Knobs


Related Information:


Nuts - Blind
Nuts - Blind

Also see combined categories:
All Nuts

Blind nuts - Tee nuts.

Put steel threads in soft materials like wood without counterboring.


Yoke Ends - Blank
Yoke Ends - Blank

Also see combined categories:
All Yoke Ends

Linkage Connectors with blank ends - no hole

Drop forged steel machined to SAE standards. Also see clevis joints.

Related Information:


Gears - Blanks
Gears - Blanks


Blanks for cutting gears and pulleys and friction drives.



Pulleys - Blocks - Eye - Swivel
Pulleys - Blocks - Eye - Swivel

Also see combined categories:
All Pulley Blocks

Steel side plates. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.


Magnets - Ceramic Blocks
Magnets - Ceramic Blocks

Also see combined categories:
All Magnets
All Ceramic Magnets

Low cost, light weight, high energy material

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Spinners - 2 Blade
Spinners - 2 Blade

Also see combined categories:
All Spinners

Spinners for aircraft propellers. Includes Dubro Range


Related Information:


Rod - Drill Blanks
Rod - Drill Blanks

Also see combined categories:
All Silver Steel Drill Blanks
All Drill Rod

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.


KA85 Belt Sander Black and Decker Parts
KA85 Belt Sander Black and Decker Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Housings - Bearing - Pillow Block - Cast Iron
Housings - Bearing - Pillow Block - Cast Iron


Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:


Housings - Bearing - Pillow Block - Plastic
Housings - Bearing - Pillow Block - Plastic


Use with steel or plastic bearing inserts for plastic housings.

Load and speed capability depend on the bearing used.

Related Information:


Housings - Bearing - Pillow Block - Pressed Metal
Housings - Bearing - Pillow Block - Pressed Metal


Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.

Related Information:


Housings - Bearing - Pillow Block - Miniature
Housings - Bearing - Pillow Block - Miniature


Spyraflo aluminium pillow block housings mounted with 440C stainless miniature bearings

No more need for expensive engineering of housings to suit your new applications. Fully greased Japanese 440C Grade corrosion resistant stainless steel ball bearings. Double shielded bearings to minimise contamination.

Related Information:


Housings - Bearing - Pillow Block - Die Cast
Housings - Bearing - Pillow Block - Die Cast

Also see combined categories:
All Housings with Integral Bearing

Zinc Die Cast Housings with or without Sintered Bronze Bearings.

Lubricable. With or without standard sintered bronze bearings.


Housings - Bearing - Pillow Block - Nylon with Ertalyte Bearing
Housings - Bearing - Pillow Block - Nylon with Ertalyte Bearing

Also see combined categories:
All Housings with Integral Bearing

Flanged Ertalyte Bearing in Moulded Nylon 101 Housing.

Self-Lubricating. High Performance. Electrically Insulating.


Housings - Bearing - Pillow Block - Thermoplastic - W300
Housings - Bearing - Pillow Block - Thermoplastic - W300

Also see combined categories:
All Housings with Integral Bearing

Iglide L280 / Igus W300 Ball with Thermoplatic Body.

Maintenance Free, Lightweight, Self-Lubricating. Compensates for alignment errors. Temperature Range -40 oC to +130 oC. Max. Static Tensile Strength is Long Term. Info for Short Term also available.


Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing


Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC.


Housings - Bearing - Pillow Block - Thermoplastic with Stainless Bearing
Housings - Bearing - Pillow Block - Thermoplastic with Stainless Bearing


Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.


Knobs - Three Lobe - Blind Hole - Solid Top - Female
Knobs - Three Lobe - Blind Hole - Solid Top - Female

Also see combined categories:
All Lobe Knobs
All Knobs

Also see star knobs


Related Information:


Housings - Bearing - Pillow Block - Frelon - Precision - Closed
Housings - Bearing - Pillow Block - Frelon - Precision - Closed


Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.


Housings - Bearing - Pillow Block - Frelon - Precision - Open
Housings - Bearing - Pillow Block - Frelon - Precision - Open


Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.


Housings - Bearing - Pillow Block - Frelon - Standard - Closed
Housings - Bearing - Pillow Block - Frelon - Standard - Closed


Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.


Housings - Bearing - Pillow Block - Frelon - Standard - Open
Housings - Bearing - Pillow Block - Frelon - Standard - Open


Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.


Housings - Linear - Pillow Block - Closed - Ceramic Coated
Housings - Linear - Pillow Block - Closed - Ceramic Coated

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. DO NOT USE WD-40 or Silcone based spray lubricants.


Shock Absorbers - Mounting Blocks
Shock Absorbers - Mounting Blocks

Also see combined categories:
All Shock Absorbers



Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 127040 products in 2365 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 127040 products in 2365 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.