Small Parts & Bearings - an MBA company

A15BLS SEEGER


Cross Referenced Part Numbers



CCE-01500-C Seeger part number A15-BLS





Shaft Diameter (Ds): 15.00. Groove Dia. (Dg): 14.30. Clip Thickness (T): 1.00.

Retail Price: 0.00     
Lower price for quantities     
Stock: 708     


Category Matches

Circlips


Circlips - Internal - Tabbed
Circlips - Internal - Tabbed

Also see combined categories:
All Internal Circlips

DIN984 / D2000 / Seeger JK. Retaining rings. Snap Rings (USA).

Internal tabs are concentrically positioned for a concealed assembly. Tabs act as spacers for securing machine components.

Related Information:


Clips


Push On Retaining Rings - Carbon Steel
Push On Retaining Rings - Carbon Steel

Also see combined categories:
All Push On Rings

M1465 / DTX / Seeger ZA and KS.

Thrust load shown is calculated for ideal conditions with mild steel shaft. If no thrust load is shown, testing is suggested.


Circlips


Circlips - Internal - Standard - Stainless Steel
Circlips - Internal - Standard - Stainless Steel

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. PH15-7 Mo Stainless Steel. Retaining rings. Snap Rings (USA).

PH15-7 Mo Stainless Steel. Tolerances on request.

Related Information:


Circlips - External - Grooveless
Circlips - External - Grooveless

Also see combined categories:
All External Circlips

Includes MIL-R-21248/MS 90707 - Styles M1440 / Ellison GR / Seeger G and GA. Retaining rings. Snap Rings (USA).

Reusable tapered section rings for grooveless shafts like plastics, tubes or castings. Can be used where adjustable ring placement is desired - like progressively tightening a compression spring.

Related Information:


Circlips - Internal - Standard - Carbon Steel
Circlips - Internal - Standard - Carbon Steel

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).

Plain carbon steel. Tolerances on request.

Related Information:


Circlips - Internal - Standard - Zinc Plated
Circlips - Internal - Standard - Zinc Plated

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).

Zinc plated carbon steel. Tolerances on request.

Related Information:


Mounts - Leveling - Socket - Black Chromate - Swivel
Mounts - Leveling - Socket - Black Chromate - Swivel

Also see combined categories:
All Female Socket Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Studded - Black Chromate - Swivel
Mounts - Leveling - Studded - Black Chromate - Swivel

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Socket - Black Chromate - Swivel - Rubber Padded
Mounts - Leveling - Socket - Black Chromate - Swivel - Rubber Padded

Also see combined categories:
All Female Socket Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Studded - Black Chromate - Swivel - Rubber Padded
Mounts - Leveling - Studded - Black Chromate - Swivel - Rubber Padded

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Socket - 303 Stainless - Swivel
Mounts - Leveling - Socket - 303 Stainless - Swivel

Also see combined categories:
All Female Socket Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Socket - Clear Chromate - Swivel
Mounts - Leveling - Socket - Clear Chromate - Swivel

Also see combined categories:
All Female Socket Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Socket - Gold Chromate - Swivel
Mounts - Leveling - Socket - Gold Chromate - Swivel

Also see combined categories:
All Female Socket Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Socket - Nickel Plated - Swivel
Mounts - Leveling - Socket - Nickel Plated - Swivel

Also see combined categories:
All Female Socket Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Studded - 303 Stainless - Swivel
Mounts - Leveling - Studded - 303 Stainless - Swivel

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Studded - 316 Stainless - Swivel
Mounts - Leveling - Studded - 316 Stainless - Swivel

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Studded - Clear Chromate - Swivel
Mounts - Leveling - Studded - Clear Chromate - Swivel

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Studded - Gold Chromate - Swivel
Mounts - Leveling - Studded - Gold Chromate - Swivel

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Studded - Nickel Plated - Swivel
Mounts - Leveling - Studded - Nickel Plated - Swivel

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Socket - Swivel - With Lag Holes
Mounts - Leveling - Socket - Swivel - With Lag Holes

Also see combined categories:
All Female Socket Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Lag holes alow base to be secured.

Hardened ball prevents galling and forms it's own seat. Large diameter pad design assures solid support. Zinc plated with gold chromate finish.


Mounts - Leveling - Studded - Swivel - With Lag Holes
Mounts - Leveling - Studded - Swivel - With Lag Holes

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Lag holes alow base to be secured.

Hardened ball prevents galling and forms it's own seat. Large diameter pad design assures solid support. Zinc plated with gold chromate finish.


Mounts - Leveling - Socket - 303 Stainless - Swivel - Acetal Padded
Mounts - Leveling - Socket - 303 Stainless - Swivel - Acetal Padded

Also see combined categories:
All Female Socket Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Socket - 303 Stainless - Swivel - Rubber Padded
Mounts - Leveling - Socket - 303 Stainless - Swivel - Rubber Padded

Also see combined categories:
All Female Socket Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.

303 Stainless Steel.


Mounts - Leveling - Socket - 316 Stainless - Swivel - Rubber Padded
Mounts - Leveling - Socket - 316 Stainless - Swivel - Rubber Padded

Also see combined categories:
All Female Socket Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Socket - Clear Chromate - Swivel - Rubber Padded
Mounts - Leveling - Socket - Clear Chromate - Swivel - Rubber Padded

Also see combined categories:
All Female Socket Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Socket - Gold Chromate - Swivel - Acetal Padded
Mounts - Leveling - Socket - Gold Chromate - Swivel - Acetal Padded

Also see combined categories:
All Female Socket Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Socket - Gold Chromate - Swivel - Rubber Padded
Mounts - Leveling - Socket - Gold Chromate - Swivel - Rubber Padded

Also see combined categories:
All Female Socket Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Socket - Nickel Plated - Swivel - Rubber Padded
Mounts - Leveling - Socket - Nickel Plated - Swivel - Rubber Padded

Also see combined categories:
All Female Socket Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Studded - 303 Stainless - Swivel - Acetal Base
Mounts - Leveling - Studded - 303 Stainless - Swivel - Acetal Base

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Studded - 303 Stainless - Swivel - Rubber Padded
Mounts - Leveling - Studded - 303 Stainless - Swivel - Rubber Padded

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Studded - 316 Stainless - Swivel - Rubber Padded
Mounts - Leveling - Studded - 316 Stainless - Swivel - Rubber Padded

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Studded - Clear Chromate - Swivel - Rubber Padded
Mounts - Leveling - Studded - Clear Chromate - Swivel - Rubber Padded

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Studded - Gold Chromate - Swivel - Acetal Base
Mounts - Leveling - Studded - Gold Chromate - Swivel - Acetal Base

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Studded - Gold Chromate - Swivel - Rubber Padded
Mounts - Leveling - Studded - Gold Chromate - Swivel - Rubber Padded

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Studded - Nickel Plated - Swivel - Rubber Padded
Mounts - Leveling - Studded - Nickel Plated - Swivel - Rubber Padded

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Circlips - External - Bevelled
Circlips - External - Bevelled

Also see combined categories:
All External Circlips

N1402 / VSH / 5102 / 16630. Retaining rings. Snap Rings (USA).

A 15 Deg. bevel on the inside diameter to be fitted to a 15% bevel on the load bearing groove wall. Will yield rigid end-play take-up of manufacturing tolerances or wear on the retained part. Used in greasy or oily environments.

Related Information:


Circlips - Internal - Bevelled
Circlips - Internal - Bevelled

Also see combined categories:
All Internal Circlips

N1302 / VHO / 16631 / 9002 / N5002. Retaining rings. Snap Rings (USA).

A 15 Deg. bevel on the outside diameter to be fitted to a 15% bevel on the load bearing groove wall. Will yield rigid end-play take-up of manufacturing tolerances or wear on the retained part. Used in greasy or oily environments.

Related Information:


Pins - Clevis - Handle - Bent - Pin Locking
Pins - Clevis - Handle - Bent - Pin Locking

Also see combined categories:
All Clevis Pins
All Clevis Pins with Handle

Also known as Hitch Pins. Heat treated.

Bent at a 15o angle. Includes zinc plated R-Clip.

Related Information:


Mounts - Leveling - Studded - 303 Stainless
Mounts - Leveling - Studded - 303 Stainless

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. Good quality with value pricing. 303 stainless steel.

Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.


Mounts - Leveling - Studded - Anti-Vibration
Mounts - Leveling - Studded - Anti-Vibration

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. Specifically designed to provide low frequency vibration isolation, leveling and shock attenuation for electronics and machinery.

15o swivel off centre to adjust to uneven surfaces. over 12mm of black neoprene permanently bonded to the base. Neoprene operating temperature -20 to 80 oC. Steel parts are zinc plated with black chromate finish.


Mounts - Leveling - Studded - Nickel Plated
Mounts - Leveling - Studded - Nickel Plated

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics.

Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.


Springs - Die - Imperial - Heavy Duty - Chrome Silicon
Springs - Die - Imperial - Heavy Duty - Chrome Silicon

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded gold. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 30 percent of the length.

Related Information:


Springs - Die - Imperial - Heavy Duty
Springs - Die - Imperial - Heavy Duty

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length.

Related Information:


Springs - Die - Imperial - Extra Heavy Duty
Springs - Die - Imperial - Extra Heavy Duty

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded green. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 25 percent of the length.

Related Information:


Belts - Timing - 5.000mm Pitch - HTD Double Sided - 15mm Wide
Belts - Timing -  5.000mm Pitch - HTD Double Sided - 15mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

HTD Series Metric Timing Belts Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 5.30mm. Pitch (P) - 5.000mm.

Related Information:


Dampers - Rotary - 5.0 to 15.0 Ncm
Dampers - Rotary -  5.0 to 15.0 Ncm

Also see combined categories:
All Dampers

Rotary dampers enable products to function with a smooth mechanical motion. Prevent lid and access panel closure damage.

Body: Polycarbonate / Gear: Polyacetal. Fluid: Silicone. Temp range 0 to 50 oC.


Sprockets - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 15.90x9.65mm duplex steel chain (10B-2 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 10B - 5/8 inch.

Related Information:


Sprocket Plates - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 15.90x9.65mm duplex steel chain (10B-2 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 10B - 5/8 inch.

Related Information:


Belts - Vee - 15.9 x 10.3mm - Notched BX
Belts - Vee - 15.9 x 10.3mm - Notched BX

Also see combined categories:
All Vee Belts 15.9mm and 16.5mm Top Width

15.9mm Top Width x 10.3mm Height.


Related Information:


Belts - Wedge - 15.9 x 13.5mm - Notched 5VX
Belts - Wedge - 15.9 x 13.5mm - Notched 5VX

Also see combined categories:
All Vee Belts 15.9mm and 16.5mm Top Width

15.9mm Top Width x 13.5mm Height.


Related Information:





Main Pages

About Us Balls List Bearings List Brands Catalogue Contact Us Charity Dental Bearings Dowel Pins Downloadable PDF Catalogue Ball Lock Pins Downloadable PDF Catalogue Balls Downloadable PDF Catalogue Ceramic Bearings Downloadable PDF Catalogue Circlips Downloadable PDF Catalogue Clevis Pins Downloadable PDF Catalogue Corrosion Resistant Bearings Downloadable PDF Catalogue Disc Springs Downloadable PDF Catalogue Dowel Pins Downloadable PDF Catalogue Economy Bearings Downloadable PDF Catalogue Hammer Drive Pins Downloadable PDF Catalogue High Speed Bearings Downloadable PDF Catalogue Key Steel Downloadable PDF Catalogue Knobs Downloadable PDF Catalogue Leveling Mounts Downloadable PDF Catalogue Metallic Bushes Downloadable PDF Catalogue O-Rings Downloadable PDF Catalogue Pins Downloadable PDF Catalogue Plastic Bearings Downloadable PDF Catalogue Polyvee Belts and Pulleys Downloadable PDF Catalogue Precision Shim Washers Downloadable PDF Catalogue Push On and Push In Rings Downloadable PDF Catalogue Rod & Tube Downloadable PDF Catalogue Roll Pins Downloadable PDF Catalogue Shaft Collars Downloadable PDF Catalogue Shim Sheet Downloadable PDF Catalogue Shoulder Screws Downloadable PDF Catalogue Sintered Bronze Bushes Downloadable PDF Catalogue Snap Rings Downloadable PDF Catalogue Socket Set Screws Downloadable PDF Catalogue Solid Bronze Bushes Downloadable PDF Catalogue Spring Steel Strip Downloadable PDF Catalogue Springs Downloadable PDF Catalogue Standard Ball Bearing Range Downloadable PDF Catalogue Super Precision Bearings Downloadable PDF Catalogue Taper Pins Downloadable PDF Catalogue Thrust Bearings Downloadable PDF Catalogue Thumb Screws and Nuts Downloadable PDF Catalogue Timing Belts Downloadable PDF Catalogue Timing Pulley Stock Downloadable PDF Catalogue Timing Pulleys Downloadable PDF Catalogue Vibration Mounts Downloadable PDF Catalogue Washers Downloadable PDF Catalogue Wave Washers Downloadable PDF Cross Reference ADR and SKF Downloadable PDF Cross Reference Anderton Circlips Downloadable PDF Cross Reference Barden Bearings Downloadable PDF Cross Reference Essentra Downloadable PDF Cross Reference Flocast Downloadable PDF Cross Reference K&S Metals Downloadable PDF Cross Reference McMaster Carr Downloadable PDF Cross Reference Miniature Precison Bearings Downloadable PDF Cross Reference Nordex Downloadable PDF Cross Reference NSK and NTN Downloadable PDF Cross Reference Ondrives Downloadable PDF Cross Reference Reid Supply Downloadable PDF Cross Reference SDP-SI Designatronics Downloadable PDF Cross Reference Seeger Circlips Downloadable PDF Cross Reference Sintered Bronze Downloadable PDF Cross Reference Small Parts Inc Downloadable PDF Cross Reference Timing Belts and Pulleys Freight Rates and Shipping Times Frequently Asked Questions Google Search Hobby Clearance Hobby Information Large Bearings Mailorder Form Order History Ordering Payment and Shipping Privacy Product Showcase Shipping Rates and Times Technical Terms


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 131199 products in 2163 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 131199 products in 2163 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.