Small Parts & Bearings - an MBA company

A120 SEEGER


Cross Referenced Part Numbers



CCE-12000-C Seeger part number A120





Shaft Diameter (Ds): 120.00. Groove Dia. (Dg): 116.00. Clip Thickness (T): 4.00.

Retail Price: 0.00     
Lower price for quantities     
Stock: 20     



CCE-12000-S15 Seeger part number A120S-S





Shaft Diameter (Ds): 120.00. Groove Dia. (Dg): 116.00. Clip Thickness (T): 4.00.

Retail Price: 0.00     
Lower price for quantities     
Stock: 4     



CCE-12000-C Seeger part number A120-WAS





Shaft Diameter (Ds): 120.00. Groove Dia. (Dg): 116.00. Clip Thickness (T): 4.00.

Retail Price: 0.00     
Lower price for quantities     
Stock: 20     



CCE-12000-S15 Seeger part number A120X4-411





Shaft Diameter (Ds): 120.00. Groove Dia. (Dg): 116.00. Clip Thickness (T): 4.00.

Retail Price: 0.00     
Lower price for quantities     
Stock: 4     



CCE-12000-C Seeger part number A120X4





Shaft Diameter (Ds): 120.00. Groove Dia. (Dg): 116.00. Clip Thickness (T): 4.00.

Retail Price: 0.00     
Lower price for quantities     
Stock: 20     


Category Matches

Circlips


Circlips - Internal - Tabbed
Circlips - Internal - Tabbed

Also see combined categories:
All Internal Circlips

DIN984 / D2000 / Seeger JK. Retaining rings. Snap Rings (USA).

Internal tabs are concentrically positioned for a concealed assembly. Tabs act as spacers for securing machine components.

Related Information:


Clips


Push On Retaining Rings - Carbon Steel
Push On Retaining Rings - Carbon Steel

Also see combined categories:
All Push On Rings

M1465 / DTX / Seeger ZA and KS.

Thrust load shown is calculated for ideal conditions with mild steel shaft. If no thrust load is shown, testing is suggested.


Circlips


Circlips - External - Grooveless
Circlips - External - Grooveless

Also see combined categories:
All External Circlips

Includes MIL-R-21248/MS 90707 - Styles M1440 / Ellison GR / Seeger G and GA. Retaining rings. Snap Rings (USA).

Reusable tapered section rings for grooveless shafts like plastics, tubes or castings. Can be used where adjustable ring placement is desired - like progressively tightening a compression spring.

Related Information:


Circlips - Internal - Standard - Carbon Steel
Circlips - Internal - Standard - Carbon Steel

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).

Plain carbon steel. Tolerances on request.

Related Information:


Circlips - Internal - Standard - Stainless Steel
Circlips - Internal - Standard - Stainless Steel

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. PH15-7 Mo Stainless Steel. Retaining rings. Snap Rings (USA).

PH15-7 Mo Stainless Steel. Tolerances on request.

Related Information:


Circlips - Internal - Standard - Zinc Plated
Circlips - Internal - Standard - Zinc Plated

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).

Zinc plated carbon steel. Tolerances on request.

Related Information:


Gearboxes - Cross Axis - 110 x 95 x 38mm
Gearboxes - Cross Axis - 110 x  95 x  38mm

Also see combined categories:
All Cross Axis Gearboxes

Worm and Wormwheel box. 10.3 to 40.0Nm. 5:1 to 120:1 ratios. P45 and PF45 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Related Information:


Gearboxes - Cross Axis - 90 x 75 x 32mm
Gearboxes - Cross Axis -  90 x  75 x  32mm

Also see combined categories:
All Cross Axis Gearboxes

Worm and Wormwheel box. 5.0 to 18.0Nm. 5:1 to 120:1 ratios. P40 and PF40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Related Information:


Mounts - Leveling - Studded - Black Chromate
Mounts - Leveling - Studded - Black Chromate

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. For levelling machine tools, electronic racks, benches etc on uneven surfaces.

Load is distributed over 120o of full radial contact rather than a single radial contact point, providing greater weight distribution between the ball and pad. Zinc plated steel with case hardened ball.


Mounts - Leveling - Studded - Gold Chromate
Mounts - Leveling - Studded - Gold Chromate

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. For levelling machine tools, electronic racks, benches etc on uneven surfaces.

Load is distributed over 120o of full radial contact rather than a single radial contact point, providing greater weight distribution between the ball and pad. Zinc plated steel with case hardened ball.


Covers - Universal Joint - Elasticate Rubber
Covers - Universal Joint - Elasticate Rubber

Also see combined categories:
All Universal Joint Covers

For Single and Double Universal Joints.

-27 oC to 70 Deg C temp range (constant). -32 oC to 120 Deg C temp range (intermittent).

Related Information:


Springs - Die - Metric - Heavy Duty
Springs - Die - Metric - Heavy Duty

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded red

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Related Information:


Springs - Die - Metric - Light Duty
Springs - Die - Metric - Light Duty

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded green

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Related Information:


Springs - Die - Metric - Medium Duty
Springs - Die - Metric - Medium Duty

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded blue

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Related Information:


Dampers - Rotary - 50 to 400 Ncm
Dampers - Rotary - 50 to 400 Ncm

Also see combined categories:
All Dampers

Rotary dampers enable products to function with a smooth mechanical motion. Prevent lid and access panel closure damage.

Body: Polycarbonate. Temp range 0 to 50 oC. Weight: Max 120 grams.


Bushes - Plastic - Iglidur J - Flanged
Bushes - Plastic - Iglidur J - Flanged

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Low Wear - Dry Running - Vibration Dampening - Chemical Resistance.

Specific Gravity 1.49 g/cm3. Operating Temp 120 C short term / 90 C long term. Tensile Strength at 20 oC = 73 Mpa. Hardness 74 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.

Related Information:


Bushes - Plastic - Iglidur J - Unflanged
Bushes - Plastic - Iglidur J - Unflanged

Also see combined categories:
All Plastic Bushes
All Unflanged Plastic Bushes

Low Wear - Dry Running - Vibration Dampening - Chemical Resistance.

Specific Gravity 1.49 g/cm3. Operating Temp 120 C short term / 90 C long term. Tensile Strength at 20 oC = 73 Mpa. Hardness 74 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.

Related Information:


Bushes - Plastic - Iglidur P - Flanged
Bushes - Plastic - Iglidur P - Flanged

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Low water absorption. Low wear. Hgh load.

Specific Gravity 1.47 g/cm3. Operating Temp 200 C short term / 130 C long term. Tensile Strength at 20 oC = 120 Mpa. Hardness 75 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.

Related Information:


Bushes - Plastic - Iglidur P - Unflanged
Bushes - Plastic - Iglidur P - Unflanged

Also see combined categories:
All Plastic Bushes
All Unflanged Plastic Bushes

Low water absorption. Low wear. Hgh load.

Specific Gravity 1.47 g/cm3. Operating Temp 200 C short term / 130 C long term. Tensile Strength at 20 oC = 120 Mpa. Hardness 75 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.

Related Information:


Housings - Bearing - Tapped Base Unit - Stainless
Housings - Bearing - Tapped Base Unit - Stainless


Full stainless steel bearing units are the best solution for hostile chemical washdown applications. All metal bearing insert components are a combination of 302, 304 and 440 stainless steel. Seals are silicone rubber. Grease is H-1 food grade.

Operating temperature minus 20 oC to +120 deg C. Solid 304 stainless housings have a machined base and extremely smooth surface finish, essential for demanding washdown installations. These housings do not experience flaking, cracking or discolouration and are virtually unaffected by scrapes. Bearings are removable. Food grade.


Bushes - Plastic - Iglidur Q - Flanged
Bushes - Plastic - Iglidur Q - Flanged

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Excellent wear resistance under high load. Resistant to dirt.

Specific Gravity 1.40 g/cm3. Operating Temp 155 C short term / 135 C long term. Tensile Strength at 20 oC = 120 Mpa. Hardness 83 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.

Related Information:


Bushings - Stroke Rotary - Miniature
Bushings - Stroke Rotary - Miniature

Also see combined categories:
All Stroke Rotary Bushings

2 to 12mm Shaft Sizes. Can operate in both linear and rotary directions at the same time.

Set includes outer ring, ball cage and shaft. Ball Cage: Brass Balls: Hard Steel / Shaft: Hard Steel Outer Ring: Hard Steel. Temperature: +100oC (Constant), +120oC (Maximum). Stroke: = (L1 - Lb) x 2. Supplied with extreme accuracy with zero to minimum preload.

Related Information:


Slides - Linear - Non Recirculating Ball - Standard
Slides - Linear - Non Recirculating Ball - Standard

Also see combined categories:
All Linear Slides

The BSP precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.

Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100oC (Constant), +120oC (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants.


Slides - Linear - Recirculating Ball - Standard
Slides - Linear - Recirculating Ball - Standard

Also see combined categories:
All Linear Slides

The BSR precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.

Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100oC (Constant), +120oC (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants. Note BSR1530SL and BSR2040SL can not be mounted from inside of track rail.


S 12000 RPM Sirona Parts
S 12000 RPM Sirona Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Latches - 110 Series - Adjustable Grip
Latches - 110 Series - Adjustable Grip


Ultimate strength 145kg. Working strength 120kg.

Strike needs to be ordered separately.


Couplings - Spline Type - Complete
Couplings - Spline Type - Complete

Also see combined categories:
All Insert and Jaw Type Couplings

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Related Information:


Couplings - Spline Type - Spare Hubs
Couplings - Spline Type - Spare Hubs

Also see combined categories:
All Insert and Jaw Type Couplings

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Related Information:


Couplings - Spline Type - Spare Poyurethane Splines
Couplings - Spline Type - Spare Poyurethane Splines

Also see combined categories:
All Insert and Jaw Type Couplings

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Related Information:


Springs - Compression - Long Lengths - Music Wire
Springs - Compression - Long Lengths - Music Wire

Also see combined categories:
All Compression Springs

1 metre and 914mm lengths

Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.

Related Information:


Springs - Compression - Long Lengths - Stainless Steel
Springs - Compression - Long Lengths - Stainless Steel

Also see combined categories:
All Compression Springs

1 metre and half metre lengths

Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.

Related Information:


Gearmotors - DC PM - Size 70x114
Gearmotors - DC PM - Size 70x114

Also see combined categories:
All DC Permanent Magnet Gearmotors

Permanent Magnet.

Max. Allowable Radial Load: 100N (10mm from mounting surface). Max. Allowable Axial Load: 30N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20oC to +60oC. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g.





Main Pages

About Us Balls List Bearings List Brands Catalogue Contact Us Charity Dental Bearings Dowel Pins Downloadable PDF Catalogue Ball Lock Pins Downloadable PDF Catalogue Balls Downloadable PDF Catalogue Ceramic Bearings Downloadable PDF Catalogue Circlips Downloadable PDF Catalogue Clevis Pins Downloadable PDF Catalogue Corrosion Resistant Bearings Downloadable PDF Catalogue Disc Springs Downloadable PDF Catalogue Dowel Pins Downloadable PDF Catalogue Economy Bearings Downloadable PDF Catalogue Hammer Drive Pins Downloadable PDF Catalogue High Speed Bearings Downloadable PDF Catalogue Key Steel Downloadable PDF Catalogue Knobs Downloadable PDF Catalogue Leveling Mounts Downloadable PDF Catalogue Metallic Bushes Downloadable PDF Catalogue O-Rings Downloadable PDF Catalogue Pins Downloadable PDF Catalogue Plastic Bearings Downloadable PDF Catalogue Polyvee Belts and Pulleys Downloadable PDF Catalogue Precision Shim Washers Downloadable PDF Catalogue Push On and Push In Rings Downloadable PDF Catalogue Rod & Tube Downloadable PDF Catalogue Roll Pins Downloadable PDF Catalogue Shaft Collars Downloadable PDF Catalogue Shim Sheet Downloadable PDF Catalogue Shoulder Screws Downloadable PDF Catalogue Sintered Bronze Bushes Downloadable PDF Catalogue Snap Rings Downloadable PDF Catalogue Socket Set Screws Downloadable PDF Catalogue Solid Bronze Bushes Downloadable PDF Catalogue Spring Steel Strip Downloadable PDF Catalogue Springs Downloadable PDF Catalogue Standard Ball Bearing Range Downloadable PDF Catalogue Super Precision Bearings Downloadable PDF Catalogue Taper Pins Downloadable PDF Catalogue Thrust Bearings Downloadable PDF Catalogue Thumb Screws and Nuts Downloadable PDF Catalogue Timing Belts Downloadable PDF Catalogue Timing Pulley Stock Downloadable PDF Catalogue Timing Pulleys Downloadable PDF Catalogue Vibration Mounts Downloadable PDF Catalogue Washers Downloadable PDF Catalogue Wave Washers Downloadable PDF Cross Reference ADR and SKF Downloadable PDF Cross Reference Anderton Circlips Downloadable PDF Cross Reference Barden Bearings Downloadable PDF Cross Reference Essentra Downloadable PDF Cross Reference Flocast Downloadable PDF Cross Reference K&S Metals Downloadable PDF Cross Reference McMaster Carr Downloadable PDF Cross Reference Miniature Precison Bearings Downloadable PDF Cross Reference Nordex Downloadable PDF Cross Reference NSK and NTN Downloadable PDF Cross Reference Ondrives Downloadable PDF Cross Reference Reid Supply Downloadable PDF Cross Reference SDP-SI Designatronics Downloadable PDF Cross Reference Seeger Circlips Downloadable PDF Cross Reference Sintered Bronze Downloadable PDF Cross Reference Small Parts Inc Downloadable PDF Cross Reference Timing Belts and Pulleys Freight Rates and Shipping Times Frequently Asked Questions Google Search Hobby Clearance Hobby Information Large Bearings Mailorder Form Order History Ordering Payment and Shipping Privacy Product Showcase Shipping Rates and Times Technical Terms


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 131199 products in 2163 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 131199 products in 2163 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.