Small Parts & Bearings - an MBA company

A100 SEEGER


Cross Referenced Part Numbers



CCE-10000-C Seeger part number A100-ARS





Shaft Diameter (Ds): 100.00. Groove Dia. (Dg): 96.50. Clip Thickness (T): 3.00.

Online Price: 0.00     
Stock: 80     



CCE-10000-C Seeger part number A100





Shaft Diameter (Ds): 100.00. Groove Dia. (Dg): 96.50. Clip Thickness (T): 3.00.

Online Price: 0.00     
Stock: 80     



CCE-10000-C Seeger part number A100X3





Shaft Diameter (Ds): 100.00. Groove Dia. (Dg): 96.50. Clip Thickness (T): 3.00.

Online Price: 0.00     
Stock: 80     


Category Matches

Circlips


Circlips - Internal - Tabbed
Circlips - Internal - Tabbed

Also see combined categories:
All Internal Circlips

DIN984 / D2000 / Seeger JK. Retaining rings. Snap Rings (USA).

Internal tabs are concentrically positioned for a concealed assembly. Tabs act as spacers for securing machine components.

Related Information:


Clips


Push On Retaining Rings - Carbon Steel
Push On Retaining Rings - Carbon Steel

Also see combined categories:
All Push On Rings

M1465 / DTX / Seeger ZA and KS.

Thrust load shown is calculated for ideal conditions with mild steel shaft. If no thrust load is shown, testing is suggested.


Circlips


Circlips - External - Grooveless
Circlips - External - Grooveless

Also see combined categories:
All External Circlips

Includes MIL-R-21248/MS 90707 - Styles M1440 / Ellison GR / Seeger G and GA. Retaining rings. Snap Rings (USA).

Reusable tapered section rings for grooveless shafts like plastics, tubes or castings. Can be used where adjustable ring placement is desired - like progressively tightening a compression spring.

Related Information:


Circlips - Internal - Standard - Carbon Steel
Circlips - Internal - Standard - Carbon Steel

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).

Plain carbon steel. Tolerances on request.

Related Information:


Circlips - Internal - Standard - Stainless Steel
Circlips - Internal - Standard - Stainless Steel

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. PH15-7 Mo Stainless Steel. Retaining rings. Snap Rings (USA).

PH15-7 Mo Stainless Steel. Tolerances on request.

Related Information:


Circlips - Internal - Standard - Zinc Plated
Circlips - Internal - Standard - Zinc Plated

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).

Zinc plated carbon steel. Tolerances on request.

Related Information:


Micromotor Isolite 100 and 300 Bien Air Parts
Micromotor Isolite 100 and 300 Bien Air Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Top Air 100 Series W.H. Parts
Top Air 100 Series W.H. Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Pins - Dowel - Extractable
Pins - Dowel - Extractable

Also see combined categories:
All Dowel Pins

Hardened and Ground Steel 100 Cr6. Din 7979.

Extractable dowels have a thread tapped in the end to fascilitate removal from blind holes. An air release flat is ground along the full length of the pin to overcome the problem of pressure build up by trapped air. Hardness 55-62 HRC, HV550-650. Extractable pins may or may not have a flat to vent pressure when pulling. Also known as parallel pins.

Related Information:


Pins - Dowel - Extractable - With Vent
Pins - Dowel - Extractable - With Vent

Also see combined categories:
All Dowel Pins

Hardened and Ground Steel 100 Cr6 with a ground flat along one edge

Extractable dowels have a thread tapped in the end to fascilitate removal from blind holes. An air release flat is ground along the full length of the pin. Hardness 55-62 HRC, HV550-650. Also known as parallel pins.

Related Information:


Elements - Locking
Elements - Locking

Also see combined categories:
All Locking Assemblies

2.4 to 2200 Nm, 6-80mm Bores

ETG 100 High Strength Steel for sizes up to 55mm bore. C60 Steel for sizes over 55mm bore. Recommended machining tolerances Shaft h8, Hub H8.


Keys - Gib Head - Steel
Keys - Gib Head - Steel

Also see combined categories:
All Gib Head Keys

Tapered 3.000 mm per 300 mm (1:100).

Related Information:


Studs - Threaded - Standard
Studs - Threaded - Standard


Metric and imperial sizes. Steel and 303 stainless steel.

Yield strength 100,000 PSI. Tensile strength 125,000 PSI.


Keys - Gib Head - Zinc Plated
Keys - Gib Head - Zinc Plated

Also see combined categories:
All Gib Head Keys

Tapered 3.000 mm per 300 mm (1:100).

Related Information:


Sleeving - Mesh
Sleeving - Mesh


Low cost protection for threaded and cylindrical parts

Elastic snug tight fit protective sleeve fits over straight, tapered or contoured parts. Made from polyethylene. Thickness of web approx 1.8mm. Sold per foot (300mm). Maximum contunuous roll is 100 feet (30 mtrs).


O-Rings - Neoprene Rubber
O-Rings - Neoprene Rubber

Also see combined categories:
All O-Rings

Excellent resistance to ageing and weathering effects.

Temperature Range: -20oC to +100oC. Resistant to ozone and refrigeration chemicals such as freon 12 and 22. Moderate resistance to swelling in mineral oils, greases and water. Not resistant to aromatic compounds such as benzene, toulene, chlorinated hydrocarbons, esters, ethers or ketones.

Related Information:


Couplings - Spline Type - Complete
Couplings - Spline Type - Complete

Also see combined categories:
All Insert and Jaw Type Couplings

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Related Information:


RC Spare Parts - SFM
RC Spare Parts - SFM


SFM spare parts listed by description

Brands include: FA100 Golden Knight and Volitation.


Couplings - Spline Type - Spare Hubs
Couplings - Spline Type - Spare Hubs

Also see combined categories:
All Insert and Jaw Type Couplings

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Related Information:


Couplings - Spline Type - Spare Poyurethane Splines
Couplings - Spline Type - Spare Poyurethane Splines

Also see combined categories:
All Insert and Jaw Type Couplings

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Related Information:


Drylin Sliding Bearings
Drylin Sliding Bearings


Linear sliding motion. Use with Drylin Aluminium Shafts.

Sliding film Iglidur J. Maximum Mean Surface Pressure: 25 N/mm2. Highest Wear Resistance at loads: Less than 2 N/mm2. Maximum Speed: 8 m/s (dry) Greater than 10 m/s (lubricated) 1.5 m/s (rotating dry). Working Temp. Range: -60oC to +100oC (increased wear when used in excess of 80oC).

Related Information:


Rod - Drill - Silversteel - W-1 Water Hardening
Rod - Drill - Silversteel  - W-1 Water Hardening

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

High abrasion resistance and high toughness when hardened. 100 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight. Refer engineering guides online for W-1 hardening requirements.


Mounts - Leveling - Hygienic - Anchoring - One Hole
Mounts - Leveling - Hygienic - Anchoring - One Hole

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.

Related Information:


Mounts - Leveling - Hygienic - Anchoring - Two Hole
Mounts - Leveling - Hygienic - Anchoring - Two Hole

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.

Related Information:


Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel
Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Wrench flats in thread still allow for full use of threaded section. 12o swivel.

Related Information:


Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel
Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Wrench flats in thread still allow for full use of threaded section. 1o swivel.

Related Information:


Slides - Linear - Clean Room
Slides - Linear - Clean Room

Also see combined categories:
All Linear Slides

Stainless Steel throughout (similar to 440C). Speed: 0.5 m/sec (30 m/min). Temperature: +100oC (Continuous), +140oC (Maximum). Life will be less than normal at +100oC and dimensions may change. Lateral Loading: Dynamic x 1.13 C - Static x 1.19 Co. Precision Linear Slide Unit is a compact linear motion rolling guide for limited stroke length.


Locknuts - Stainless Insert
Locknuts - Stainless Insert


Simplify the assembly and reduce costs involved in securing ball bearings. One piece item where the locking function is performed by a spring peened into the top of the nut.

Nut Body: Low Carbon Steel. Locking Insert: Stainless Steel Hardness HB 201-269. The spring bears on the flank of the shaft thread with force (P) generating reaction force (Pí) in the screw threads with a resulting high friction torque (prevailing torque). Unique slim body design. Secure locking without keyway and tab washer. One piece construction reduces stock and allows simpler, quicker assembly. Simple infinite adjustment. Re-usable up to 100 times. Resists vibration and shock. Equally effective for rotation in either direction even with rapid reversals.

Related Information:


Bearings - Linear - Ball - Closed
Bearings - Linear - Ball - Closed

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:


Tape - Fiberglass - PTFE Coated
Tape - Fiberglass - PTFE Coated

Also see combined categories:
All Tape

Heat Sealer Tape

Non stick ptfe tape is resistant to abrasion, high temperature and chemicals. Commonly used on heatsealing machines, mould protection, packaging, automotive and electrical applications. Temperature range minus 73 oC to 260 oC (-100 to 500 Deg F). Less than 5 percent elongation.


Motors - DC 6mm Diameter
Motors - DC  6mm Diameter

Also see combined categories:
All DC Motors

Our smallest motors at an affordable price.

Various models 10000 to 30000 rpm. Low starting voltage of Less than0.8V. Rated Voltage 1.3V. Less than 43 dB Mechanical Noise Level. 100 hours / 100000 turns mechanical life. Clockwise rotation when viewed from shaft end. Not recommended for reversing.

Related Information:


Gear Racks - Flexible
Gear Racks - Flexible

Also see combined categories:
All Flexible Gear Racks

Blue acetal. Ideal for curved or irregular surfaces. Can fit a bent radius as small as 75mm.

20o Pressure Angle. Resistant to weak acids and alkalis, oil, grease, petrol, alcohol, ketones. Working temperature 100 Deg. C, Intermittent to 149 Deg. C. See optional rack clamps and guide rails. Longer lengths available on special order.


Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing


Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC.


Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing


Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC.


Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing
Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing


Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC.


Rod - Round - Polyester PETP
Rod - Round - Polyester PETP

Also see combined categories:
All Plastic Rod

High mechanical strength, stiffness and hardness. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.39 g/cm3 - Operating Temp 115 C / 5000 hrs - 100 C / 20000 hrs. Tensile Strength 90 Mpa. Hardness 96 Rockwell M. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Related Information:


Bearings - Linear - Ball - Stainless Steel - Closed
Bearings - Linear - Ball - Stainless Steel - Closed

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:


Bearings - Acetal - Double Row - with Glass Balls
Bearings - Acetal - Double Row - with Glass Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Double Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:


Bearings - Acetal - Single Row - with Glass Balls
Bearings - Acetal - Single Row - with Glass Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:


Bushings - Stroke Rotary - Miniature
Bushings - Stroke Rotary - Miniature

Also see combined categories:
All Stroke Rotary Bushings

2 to 12mm Shaft Sizes. Can operate in both linear and rotary directions at the same time.

Set includes outer ring, ball cage and shaft. Ball Cage: Brass Balls: Hard Steel / Shaft: Hard Steel Outer Ring: Hard Steel. Temperature: +100oC (Constant), +120oC (Maximum). Stroke: = (L1 - Lb) x 2. Supplied with extreme accuracy with zero to minimum preload.

Related Information:


Slides - Linear - Non Recirculating Ball - Standard
Slides - Linear - Non Recirculating Ball - Standard

Also see combined categories:
All Linear Slides

The BSP precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.

Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100oC (Constant), +120oC (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants.


Bearings - Acetal - Double Row - with 316 Stainless Steel Balls
Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Double Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:


Bearings - Acetal - Single Row - with 302 Stainless Steel Balls
Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:


Bearings - Acetal - Single Row - with 316 Stainless Steel Balls
Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:


Couplings - K Type
Couplings - K Type


Up to 3600 RPM - Minus 20 to Plus 60o C. 0.34 to 18 Nm.

Strong, flexible polyurethane or Hyrtel(R) is cut and tear resistant. Up to 3600 RPM. Urethane: Minus 20 to Plus 60o C / Hyrtel(R) : Minus 40 to Plus 100o C. Precision swaged mechanically crimped hubs. Annealed steel hubs.

Related Information:


Housings - Bearing - Pillow Block - Thermoplastic with Stainless Bearing
Housings - Bearing - Pillow Block - Thermoplastic with Stainless Bearing


Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.


Housings - Bearing - 3 Bolt Offset - Thermoplastic with Stainless Bearing
Housings - Bearing - 3 Bolt Offset - Thermoplastic with Stainless Bearing


Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.


Housings - Bearing - 4 Bolt Flange - Thermoplastic with Stainless Bearing
Housings - Bearing - 4 Bolt Flange - Thermoplastic with Stainless Bearing


Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 127037 products in 2368 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 127037 products in 2368 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.