Studs Full Thread Steel Categories


Category Matches

Allthread

TopHide Pictures

Studs - Full Thread - Steel
Studs - Full Thread - Steel

Search Rating: 84%

Also see combined categories:
All Studs

Low carbon steel allthread threaded bar

Short lengths of threaded low carbon steel bar.


Studs - Full Thread - Stainless Steel
Studs - Full Thread - Stainless Steel

Search Rating: 83%

Also see combined categories:
All Studs

18-8 Stainless Steel Allthread Threaded Bar

Short lengths of threaded 18-8 stainless steel bar.


Studs

TopHide Pictures

Studs - Threaded - Driver
Studs - Threaded - Driver

Search Rating: 66%

Medium carbon steel with black oxide finish. 125,000 PSI minimum tensile strength. With wrench flats in the centre.


Studs - Ball - Threaded
Studs - Ball - Threaded

Search Rating: 65%

Zinc Plated Steel DIN 71803 Form C. Surface Hardened to 55 HRC (Ball (D1) Only - Thread is Not Hardened).


Studs - Threaded - Standard
Studs - Threaded - Standard

Search Rating: 65%

Metric and imperial sizes. Steel and 303 stainless steel.

Yield strength 100,000 PSI. Tensile strength 125,000 PSI.


Collars

TopHide Pictures

Collars - Threaded - Clamp Type - Steel
Collars - Threaded - Clamp Type - Steel

Search Rating: 65%

Also see combined categories:
All Threaded Shaft Collars

Offer full radial holding power without marring the shaft.


Eyebolts

TopHide Pictures

Bolts - Eye - Full Threaded Shanks - Carbon Steel
Bolts - Eye - Full Threaded Shanks - Carbon Steel

Search Rating: 65%

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel
Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel

Search Rating: 65%

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel. No threads. No capacity rating as this will depend on your modifications.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel
Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel

Search Rating: 65%

Also see combined categories:
All Eye Bolts

304 Stainless Steel

Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel

Search Rating: 65%

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated

Search Rating: 65%

Also see combined categories:
All Eye Bolts

Forged zinc plated carbon steel.

Zinc plated carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


Collars

TopHide Pictures

Collars - Threaded - Clamp Type - Stainless Steel
Collars - Threaded - Clamp Type - Stainless Steel

Search Rating: 65%

Also see combined categories:
All Threaded Shaft Collars

Offer full radial holding power without marring the shaft.


Mounts Leveling

TopHide Pictures

Mounts - Leveling - Stud Type - Acme Thread - Stainless Steel
Mounts - Leveling - Stud Type - Acme Thread - Stainless Steel

Search Rating: 64%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

303 Stainless Steel. Adjusters.


Screws Hex Head

TopHide Pictures

Screws - Hex Head - Steel - Zinc Plated - Full Thread
Screws - Hex Head - Steel - Zinc Plated - Full Thread

Search Rating: 64%

Also see combined categories:
All Hex Head Screws

BSW and METRIC - Set Screws

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Hex Head - Steel - Zinc Plated - Full Thread.

Mounts Leveling

TopHide Pictures

Mounts - Leveling - Socket Type - Acme Thread - Stainless Steel
Mounts - Leveling - Socket Type - Acme Thread - Stainless Steel

Search Rating: 62%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Use your own acme thread to make a custom stud. 303 Stainless Steel. Adjusters.


Screws Panel

TopHide Pictures

Screws - Panel - Jack - Steel
Screws - Panel - Jack - Steel

Search Rating: 62%

Also see combined categories:
All Panel Screws

Female 4-40 UNC thread in head allows for secure fixing of studs to a panel.

Each screw comes with two flat washers, 1one lock washer and one hex nut. Yellow chromate zinc finish.


Nuts Lock

TopHide Pictures

Nuts - Hexagonal - Binx - Steel
Nuts - Hexagonal - Binx - Steel

Search Rating: 53%

Also see combined categories:
All Lock Nuts

The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.


Mounts Leveling

TopHide Pictures

Mounts - Leveling - Nylon - Studded Type - With Lag Holes
Mounts - Leveling - Nylon - Studded Type - With Lag Holes

Search Rating: 52%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Steel and stainless steel threads. Adjusters.


Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel
Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel

Search Rating: 51%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Wrench flats in thread still allow for full use of threaded section. 12o swivel.


Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel
Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel

Search Rating: 51%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Wrench flats in thread still allow for full use of threaded section. 1o swivel.


Nuts Lock

TopHide Pictures

Nuts - Hexagonal - Binx - Stainless Steel 304
Nuts - Hexagonal - Binx - Stainless Steel 304

Search Rating: 50%

Also see combined categories:
All Lock Nuts

Manufactured from A2 302/304 grade stainless steel. The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.


Knobs Round

TopHide Pictures

Knobs - Round - Male - Soft
Knobs - Round - Male - Soft

Search Rating: 49%

Also see combined categories:
All Round Knobs
All Knobs

Special high impact strength black technopolymer coated with soft touch elastomer chemically bonded (hardness 70 Shore A). Black matte finish. Resistant to solvents, oils, greases and other chemical agents. Zinc plated threaded steel stud.


Allthread

TopHide Pictures

Threaded Rod - Allthread - Steel - Plain
Threaded Rod - Allthread - Steel - Plain

Search Rating: 48%

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - BSW - Includes plain mild steel and high tensile. Also known as booker rod.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Threaded Rod - Allthread - Steel - Plain.

Threaded Rod - Allthread - Steel - Zinc Plated
Threaded Rod - Allthread - Steel - Zinc Plated

Search Rating: 48%

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - BSW. Also known as booker rod.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Threaded Rod - Allthread - Steel - Zinc Plated.

Leadscrews

TopHide Pictures

Leadscrews - Metric - Rolled Thread - Carbon Steel
Leadscrews - Metric - Rolled Thread - Carbon Steel

Search Rating: 48%

Also see combined categories:
All Metric Leadscrews

Trapezoidal thread design. Use with metric leadscrew nuts listed in separate category.

Carbon Steel C35. For power transmission and continuous use always use bronze nuts - never steel. Nuts and screws should always be lubricated with grease or oil. Steel nuts with steel screws should only be used for hand motion. Efficiency Guide 20 percent with lubrication for single start.

Related Information:

Threaded Rod

TopHide Pictures

Threaded Rod - Unthreaded Centre - Steel
Threaded Rod - Unthreaded Centre - Steel

Search Rating: 48%

Also see combined categories:
All Threaded Rod

UNC Small range only. Threaded each end 38.1mm (1.5 inches) and unthreaded in the centre.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Threaded Rod - Unthreaded Centre - Steel.

Allthread

TopHide Pictures

Threaded Rod - Allthread - Stainless Steel - 304
Threaded Rod - Allthread - Stainless Steel - 304

Search Rating: 48%

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - 303 and 304 grades. Also known as booker rod.


Threaded Rod - Allthread - Stainless Steel - 316
Threaded Rod - Allthread - Stainless Steel - 316

Search Rating: 48%

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - 316 grade. Also known as booker rod.


Plungers Ball

TopHide Pictures

Plungers - Ball - Threaded - Steel
Plungers - Ball - Threaded - Steel

Search Rating: 48%

Also see combined categories:
All Threaded Ball Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Ball - Threaded - Steel Body - Nylon Ball
Plungers - Ball - Threaded - Steel Body - Nylon Ball

Search Rating: 48%

Also see combined categories:
All Threaded Ball Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Ball - Threaded - Steel Body - Stainless Ball
Plungers - Ball - Threaded - Steel Body - Stainless Ball

Search Rating: 48%

Also see combined categories:
All Threaded Ball Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Ball - Threaded - Steel - Threadlock
Plungers - Ball - Threaded - Steel - Threadlock

Search Rating: 48%

Also see combined categories:
All Threaded Ball Plungers

With Long-Lok thread locking compound to prevent loosening

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers Spring

TopHide Pictures

Plungers - Spring - Threaded - Steel
Plungers - Spring - Threaded - Steel

Search Rating: 48%

Also see combined categories:
All Threaded Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Threaded - Steel and Plastic
Plungers - Spring - Threaded - Steel and Plastic

Search Rating: 48%

Also see combined categories:
All Threaded Spring Plungers

Plastic nose with steel body

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Threaded - Steel - Hex Nose
Plungers - Spring - Threaded - Steel - Hex Nose

Search Rating: 48%

Also see combined categories:
All Threaded Spring Plungers

Steel body and steel hex nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose
Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose

Search Rating: 48%

Also see combined categories:
All Threaded Spring Plungers

Over 10 million cycles. Built to take the tough abuse of high speed, long run, stamping operations. Ideal for use as parts lifters in dies, or other applications requiring exceptional long life.

Special long life springs. Black oxide finished bodies. Nylon locking element. Not recommended for use in aluminium applications.


Plungers - Spring - Threaded - Steel - Long Stroke
Plungers - Spring - Threaded - Steel - Long Stroke

Search Rating: 48%

Also see combined categories:
All Threaded Spring Plungers

With Long-Lok thread locking compound to prevent loosening

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Threaded - Steel - Threadlock
Plungers - Spring - Threaded - Steel - Threadlock

Search Rating: 48%

Also see combined categories:
All Threaded Spring Plungers

With Long-Lok thread locking compound to prevent loosening

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Spacers

TopHide Pictures

Spacers - Hex - Threaded - Steel
Spacers - Hex - Threaded - Steel

Search Rating: 48%

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Spacers - Hex - Threaded - Steel.

Screws Round Head

TopHide Pictures

Screws - Roof Bolt - Steel
Screws - Roof Bolt - Steel

Search Rating: 48%

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric and BSW only. Supplied with nut.

Nuts sold seperately - See Nuts.

Related Information:

Knobs Ball

TopHide Pictures

Knobs - Ball - Threaded - Polished Steel
Knobs - Ball - Threaded - Polished Steel

Search Rating: 48%

Also see combined categories:
All Female Threaded Ball Knobs

Low carbon steel 12L14


Knobs - Ball - Threaded - Stainless Steel
Knobs - Ball - Threaded - Stainless Steel

Search Rating: 48%

Also see combined categories:
All Female Threaded Ball Knobs

303 stainless steel (European grade 1.4305)


Pins Pull

TopHide Pictures

Pins - Pull - Threaded End - Steel
Pins - Pull - Threaded End - Steel

Search Rating: 48%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg.


Thread Inserts

TopHide Pictures

Inserts - Self Tapping - For Plastics - Steel
Inserts - Self Tapping - For Plastics - Steel

Search Rating: 48%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from steel with zinc chromate finish.

Related Information:

Screws Cheese Head

TopHide Pictures

Screws - Fillister Head - Steel - Philips
Screws - Fillister Head - Steel - Philips

Search Rating: 48%

Also see combined categories:
All Machine Screws

Metal Thread Screws BA - UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Related Information:

Screws - Fillister Head - Steel - Slotted
Screws - Fillister Head - Steel - Slotted

Search Rating: 48%

Also see combined categories:
All Machine Screws

Metal Thread Screws BA - UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Related Information:

Screws Pan Head

TopHide Pictures

Screws - Pan Head - Steel - Philips
Screws - Pan Head - Steel - Philips

Search Rating: 48%

Also see combined categories:
All Machine Screws

Metal Thread Screws UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Pan Head - Steel - Philips.

Screws - Pan Head - Steel - Pozidrive
Screws - Pan Head - Steel - Pozidrive

Search Rating: 48%

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric only.

Nuts sold seperately - See Nuts.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Pan Head - Steel - Pozidrive.

Screws - Pan Head - Steel - Slotted
Screws - Pan Head - Steel - Slotted

Search Rating: 48%

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric only.

Nuts sold seperately - See Nuts.

Related Information:

Screws Round Head

TopHide Pictures

Screws - Round Head - Steel - Slotted
Screws - Round Head - Steel - Slotted

Search Rating: 48%

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric and BSW only. Supplied with nut.

Nuts sold seperately - See Nuts.

Related Information:

Thread Inserts

TopHide Pictures

Inserts - Thread Repair - Keylocking
Inserts - Thread Repair - Keylocking

Search Rating: 48%

Also see combined categories:
All Keylocking Inserts and Kits

Steel or 303 Stainless Steel as indicated in the tables. Also known as keenserts.

Steel or 303 Stainless Steel as indicated in the tables. Maximum strength and reliability. Positive mechanical lock against rotation:. The insert kees are driven down into the tapped threads of the parent material during installation to securely lock the insert against rotation. Inserts with internal thread lock are designed to securely lock a bolt when it is entered into the insert only a few turns.


Inserts - Thread Repair - Recoil
Inserts - Thread Repair - Recoil

Search Rating: 48%

Also see combined categories:
All Recoil Inserts and Kits

Recoil inserts are screwed directly into an enlarged tapped hole. Replacement inserts for your kit.

Stainless inserts. Replacement Individual Inserts - Require full kit to obtain correct tap. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.


Plungers Ball

TopHide Pictures

Plungers - Ball - Threaded - 303 Stainless Steel
Plungers - Ball - Threaded - 303 Stainless Steel

Search Rating: 48%

Also see combined categories:
All Threaded Ball Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Ball - Threaded - 303 Stainless Steel - Nylon Balls
Plungers - Ball - Threaded - 303 Stainless Steel - Nylon Balls

Search Rating: 48%

Also see combined categories:
All Threaded Ball Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Ball - Threaded - 303 Stainless Steel with Threadlock
Plungers - Ball - Threaded - 303 Stainless Steel with Threadlock

Search Rating: 48%

Also see combined categories:
All Threaded Ball Plungers

With Long-Lok thread locking compound to prevent loosening

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers Spring

TopHide Pictures

Plungers - Spring - Threaded Adapter - Locking - Steel
Plungers - Spring - Threaded Adapter - Locking - Steel

Search Rating: 48%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Pins Pull

TopHide Pictures

Pins - Pull - Threaded End - Stainless Steel
Pins - Pull - Threaded End - Stainless Steel

Search Rating: 48%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg.


Spacers

TopHide Pictures

Spacers - Hex - Threaded - 316 Stainless Steel
Spacers - Hex - Threaded - 316 Stainless Steel

Search Rating: 48%

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.


Thread Inserts

TopHide Pictures

Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel
Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel

Search Rating: 48%

Also see combined categories:
All EZ Lok inserts and Kits

Easy to install with a standard tap, bolt and wrench.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Related Information:

Plungers Spring

TopHide Pictures

Plungers - Spring - Threaded Adapter - Non Locking - Steel
Plungers - Spring - Threaded Adapter - Non Locking - Steel

Search Rating: 48%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Pins Pull

TopHide Pictures

Pins - Pull - Threaded End - Aluminium and Steel
Pins - Pull - Threaded End - Aluminium and Steel

Search Rating: 48%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg.


Spacers

TopHide Pictures

Spacers - Hex - Threaded - 303-304 Stainless Steel
Spacers - Hex - Threaded - 303-304 Stainless Steel

Search Rating: 48%

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.


Sleeves

TopHide Pictures

Sleeves - Square Hole - Threaded - Carbon Steel
Sleeves - Square Hole - Threaded - Carbon Steel

Search Rating: 48%

Also see combined categories:
All Square Hole Sleeves

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through and threaded internally at one end.


Tools Threading

TopHide Pictures

Tools - Dies - Carbon Steel
Tools - Dies - Carbon Steel

Search Rating: 47%

Also see combined categories:
All Dies
All Tools

Tungsten Chrome Alloy - Carbon Steel Button dies and die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - Dies - Carbon Steel.

Thread Inserts

TopHide Pictures

Inserts - Thread Repair - EZ-Lok - Solid 303 Stainless Steel
Inserts - Thread Repair - EZ-Lok - Solid 303 Stainless Steel

Search Rating: 47%

Also see combined categories:
All EZ Lok inserts and Kits

Easy to install with a standard tap, bolt and wrench.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Related Information:

Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - Threaded End - Stainless Steel
Pins - Ball Lock - Threaded End - Stainless Steel

Search Rating: 47%

Also see combined categories:
All Ball Lock Pins with Threaded End

One end threaded so you can attach your own handle or knob. Also called detent pins.


Tools Threading

TopHide Pictures

Tools - Taps - High Speed Steel - Spiral Flute - Steam Oxide
Tools - Taps - High Speed Steel - Spiral Flute - Steam Oxide

Search Rating: 47%

Also see combined categories:
All Taps
All Tools

Metric, UNC and UNF high vanadium powder metal high speed steel intermediate taps. 37o helix.


Tools - Taps - High Speed Steel - Spiral Point - Steam Oxide
Tools - Taps - High Speed Steel - Spiral Point - Steam Oxide

Search Rating: 47%

Also see combined categories:
All Taps
All Tools

Metric, UNC and UNF high vanadium powder metal high speed steel intermediate taps. Also called gun taps.


Tools - Taps - Carbon Steel - Hand
Tools - Taps - Carbon Steel - Hand

Search Rating: 47%

Also see combined categories:
All Taps
All Tools

Carbon Steel Straight Flute Taps. Starting from M1 and 0-90 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

Carbon steel hand taps. Carbon Steel (CS) Hand taps.


Plungers Spring

TopHide Pictures

Plungers - Spring - Threaded - Stainless
Plungers - Spring - Threaded - Stainless

Search Rating: 47%

Also see combined categories:
All Threaded Spring Plungers

303 Stainless Steel.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Spacers

TopHide Pictures

Spacers - Round - Threaded
Spacers - Round - Threaded

Search Rating: 47%

Brass or 303 Stainless Steel


Eyebolts

TopHide Pictures

Bolts - Eye - Partially Threaded Shanks - Plain - Carbon Steel
Bolts - Eye - Partially Threaded Shanks - Plain - Carbon Steel

Search Rating: 47%

Also see combined categories:
All Eye Bolts

Hot galvanised finished steel with machine thread.

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.


Bolts - Eye - Partially Threaded Shanks - Plain - Stainless Steel
Bolts - Eye - Partially Threaded Shanks - Plain - Stainless Steel

Search Rating: 47%

Also see combined categories:
All Eye Bolts

316 Stainless Steel

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.


Bolts - Eye - Partially Threaded Shanks - Shouldered - Carbon Steel
Bolts - Eye - Partially Threaded Shanks - Shouldered - Carbon Steel

Search Rating: 47%

Also see combined categories:
All Eye Bolts

Hot galvanised finished steel with machine thread.

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.


Bolts - Eye - Partially Threaded Shanks - Shoulder - Stainless Steel
Bolts - Eye - Partially Threaded Shanks - Shoulder - Stainless Steel

Search Rating: 47%

Also see combined categories:
All Eye Bolts

316 Stainless Steel

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.


Tools Threading

TopHide Pictures

Tools - Dies - High Speed Steel
Tools - Dies - High Speed Steel

Search Rating: 47%

Also see combined categories:
All Dies
All Tools

High Speed Steel Button Dies


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - Dies - High Speed Steel.

Plungers Spring

TopHide Pictures

Plungers - Spring - Threaded - Stainless-Acetal
Plungers - Spring - Threaded - Stainless-Acetal

Search Rating: 47%

Also see combined categories:
All Threaded Spring Plungers

303 Stainless Steel body and acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Threaded - Steel-Acetal - Hex Nose
Plungers - Spring - Threaded - Steel-Acetal - Hex Nose

Search Rating: 47%

Also see combined categories:
All Threaded Spring Plungers

Steel body and acetal hex nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Yoke Ends

TopHide Pictures

Yoke Ends - Threaded
Yoke Ends - Threaded

Search Rating: 47%

Also see combined categories:
All Yoke Ends

Linkage Connectors

Drop forged steel machined to SAE standards. Also see clevis joints.

Related Information:

Thread Inserts

TopHide Pictures

Inserts - Self Tapping - For Aluminium - Steel
Inserts - Self Tapping - For Aluminium - Steel

Search Rating: 47%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Related Information:

Plungers Spring

TopHide Pictures

Plungers - Spring - Threaded - Stainless and Plastic
Plungers - Spring - Threaded - Stainless and Plastic

Search Rating: 47%

Also see combined categories:
All Threaded Spring Plungers

303 Stainless Steel.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Threaded - Steel-Acetal
Plungers - Spring - Threaded - Steel-Acetal

Search Rating: 47%

Also see combined categories:
All Threaded Spring Plungers

Acetal nose with steel body

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Tools Threading

TopHide Pictures

Tools - Taps - High Speed Steel - Extension
Tools - Taps - High Speed Steel - Extension

Search Rating: 47%

Also see combined categories:
All Taps
All Tools

Intermediate small shank spiral point extension taps 150mm long


Tools - Taps - High Speed Steel - Hand
Tools - Taps - High Speed Steel - Hand

Search Rating: 47%

Also see combined categories:
All Taps
All Tools

High Speed Steel Short Machine Flute Taps. starting from M1 and 0-90 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

High Speed Steel (HSS) Short Machine taps.


Tools - Taps - High Speed Steel - Helicoil
Tools - Taps - High Speed Steel - Helicoil

Search Rating: 47%

Also see combined categories:
All Taps
All Tools

Special oversized taps to suit Helicoil Brand -tm- inserts. Intermediate and Bottoming. Inch sizes are class 2B and metric are class 5H.


Pins Taper

TopHide Pictures

Pins - Taper - Imperial - Extractable - External Thread - Stainless Steel
Pins - Taper - Imperial - Extractable - External Thread - Stainless Steel

Search Rating: 47%

Also see combined categories:
All Imperial Taper Pins

Imperial Sizes Tapered 1:48 (1/4 in. per foot). Standard sizes numbers 0 to 14.

Threaded externally for easy extraction.

Related Information:

Leadscrews

TopHide Pictures

Leadscrews - Imperial - Acme - Alloy Steel
Leadscrews - Imperial - Acme - Alloy Steel

Search Rating: 47%

Also see combined categories:
All Imperial Leadscrews

Acme Leadscrew Thread - Use with Acme Supernuts

Alloy steel heat treated to RC 56-60.

Related Information:

Tools Threading

TopHide Pictures

Tools - Taps - High Speed Steel - Hand - Sets
Tools - Taps - High Speed Steel - Hand - Sets

Search Rating: 47%

Also see combined categories:
All Taps
All Tools

Metric and Imperial High Speed Steel tap sets including taper, intermediate and bottoming tap in each set

High Speed Steel (HSS) Short Machine taps.


Tools - Taps - High Speed Steel - NPT Pipe
Tools - Taps - High Speed Steel - NPT Pipe

Search Rating: 47%

Also see combined categories:
All Taps
All Tools

Taper Pipe Taps


Tools - Taps - High Speed Steel - Spiral Flute
Tools - Taps - High Speed Steel - Spiral Flute

Search Rating: 47%

Also see combined categories:
All Taps
All Tools

Metric spiral flute taps. Ground thread. 50o helix.


Tools - Taps - High Speed Steel - Spiral Point
Tools - Taps - High Speed Steel - Spiral Point

Search Rating: 47%

Also see combined categories:
All Taps
All Tools

Metric intermediate ground thread high speed steel taps. Also called gun taps.


Tools - Die Nuts
Tools - Die Nuts

Search Rating: 47%

Also see combined categories:
All Dies
All Tools

Tungsten Chrome Alloy - Carbon Steel die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.


Thread Inserts

TopHide Pictures

Tools - Thread Insert - Power Drive - EZ-Lok
Tools - Thread Insert - Power Drive - EZ-Lok

Search Rating: 47%

Also see combined categories:
All Tools

Made from stress proof steel. The power drive tool is used for volume installation of EZ-LOK thread inserts.


Inserts - Expansion - Press In - 303 Stainless Steel
Inserts - Expansion - Press In - 303 Stainless Steel

Search Rating: 47%

Also see combined categories:
All Expansion Inserts

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.

Material : 303 Stainless Steel. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability but where maximum strength is required other inserts shown in this catalogue should be preferred.


Latches Adjustable

TopHide Pictures

Latches - Adjustable Draw - With Hook - Steel
Latches - Adjustable Draw - With Hook - Steel

Search Rating: 47%

Threaded rod allows periodic adjustments where gasketing and material tolerances may vary. Passivated zinc plated steel with yellow vinyl grip.


Latches - Adjustable Draw - With Keeper - Steel
Latches - Adjustable Draw - With Keeper - Steel

Search Rating: 47%

Threaded rod allows periodic adjustments where gasketing and material tolerances may vary. Passivated zinc plated Steel.


Leadscrews

TopHide Pictures

Leadscrews - Imperial - Acme - Stainless Steel 18.8
Leadscrews - Imperial - Acme - Stainless Steel 18.8

Search Rating: 47%

Also see combined categories:
All Imperial Leadscrews

Acme Leadscrew Thread - Use with Acme Supernuts

Related Information:

Tools Threading

TopHide Pictures

Tools - Taps - High Speed Steel - NPT Pipe - Interrupted
Tools - Taps - High Speed Steel - NPT Pipe - Interrupted

Search Rating: 47%

Also see combined categories:
All Taps
All Tools

Taper Pipe Taps


Tools - Taps - High Speed Steel - Spiral Point - Premium
Tools - Taps - High Speed Steel - Spiral Point - Premium

Search Rating: 47%

Also see combined categories:
All Taps
All Tools

Premium spiral point intermediate taps in UNC and UNF. Also called gun taps.


Spacers

TopHide Pictures

Standoffs - Hexagonal
Standoffs - Hexagonal

Search Rating: 47%

Swage Type - Threaded - Brass or Stainless Steel. Internal threaded pillars.



Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 124408 products in 3083 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.