Screws Cap Socket Alloy Steel Brass Tipped Categories


Category Matches

Screws Cap Head

TopHide Pictures

Screws - Cap - Socket - Alloy Steel - Brass Tipped
Screws - Cap - Socket - Alloy Steel - Brass Tipped

Search Rating: 63%

Also see combined categories:
All Socket Cap Screws
All Soft Tipped Grub Screws

Brass tipped socket cap screws in alloy steel


Screws Grub (Socket Set)

TopHide Pictures

Socket Set Screws - Brass Tipped - Alloy Steel
Socket Set Screws - Brass Tipped - Alloy Steel

Search Rating: 56%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Brass tipped grub screws. Helps to prevent shaft damage on harder shafts.

Related Information:

Screws Cap Head

TopHide Pictures

Screws - Cap - Socket - Alloy Steel - Nylon Tipped
Screws - Cap - Socket - Alloy Steel - Nylon Tipped

Search Rating: 54%

Also see combined categories:
All Socket Cap Screws
All Soft Tipped Grub Screws

Nylon tipped socket cap screws in alloy steel


Screws - Cap - Socket - Alloy Steel
Screws - Cap - Socket - Alloy Steel

Search Rating: 54%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Alloy Steel.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Cap - Socket - Alloy Steel.

Screws - Cap - Socket - Alloy Steel - Nylon Locking
Screws - Cap - Socket - Alloy Steel - Nylon Locking

Search Rating: 54%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

Alloy steel socket cap screws with nylon locking pellet


Screws - Cap - Socket - Zinc Plated
Screws - Cap - Socket - Zinc Plated

Search Rating: 53%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Alloy Steel.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.

Related Information:

Screws - Low Head - Socket
Screws - Low Head - Socket

Search Rating: 52%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Alloy Steel.

Note. Hex key size may. The size listed is the usual and minimum size.

Related Information:

Screws Grub (Socket Set)

TopHide Pictures

Socket Set Screws - Acetal Tipped - Alloy Steel
Socket Set Screws - Acetal Tipped - Alloy Steel

Search Rating: 47%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Acetal tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.

Related Information:

Socket Set Screws - Nylon Tipped - Alloy Steel
Socket Set Screws - Nylon Tipped - Alloy Steel

Search Rating: 47%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Nylon tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.

Related Information:

Screws Button Head

TopHide Pictures

Screws - Button - Socket - Alloy Steel
Screws - Button - Socket - Alloy Steel

Search Rating: 47%

Also see combined categories:
All Machine Screws
All Socket Button Screws

UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Button - Socket - Alloy Steel.

Screws Grub (Socket Set)

TopHide Pictures

Socket Set Screws - Oval Tip - Alloy Steel
Socket Set Screws - Oval Tip - Alloy Steel

Search Rating: 47%

Also see combined categories:
All Grub Screws

Related Information:

Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN916
Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN916

Search Rating: 47%

Also see combined categories:
All Grub Screws

Standard grub screws. UNC - UNF - BA - METRIC.

Related Information:

Screws Countersunk

TopHide Pictures

Screws - Countersunk - Socket - Steel
Screws - Countersunk - Socket - Steel

Search Rating: 46%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Alloy Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. Rc38-42. ASTM F835 - alloy steel. ISO 10642.

Related Information:

Screws Grub (Socket Set)

TopHide Pictures

Socket Set Screws - Brass Tipped - Stainless Steel
Socket Set Screws - Brass Tipped - Stainless Steel

Search Rating: 45%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Brass tipped grub screws. Helps to prevent shaft damage on harder shafts.

Related Information:

Screws Countersunk

TopHide Pictures

Screws - Countersunk - Socket - Steel - Zinc Plated
Screws - Countersunk - Socket - Steel - Zinc Plated

Search Rating: 45%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. Rc38-42. ASTM F835 - alloy steel. ISO 10642.

Related Information:

Screws Cap Head

TopHide Pictures

Screws - Cap - Socket - 18-8 Stainless Steel - Nylon Tipped
Screws - Cap - Socket - 18-8 Stainless Steel - Nylon Tipped

Search Rating: 43%

Also see combined categories:
All Socket Cap Screws
All Soft Tipped Grub Screws

Nylon tipped socket cap screws in 18-8 Stainless Steel - similar to 316 stainless


Screws - Cap - Socket - 316 Stainless
Screws - Cap - Socket - 316 Stainless

Search Rating: 42%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Stainless Steel.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.

Related Information:

Screws - Cap - Socket - 303 - 304 Stainless
Screws - Cap - Socket - 303 - 304 Stainless

Search Rating: 42%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Stainless Steel.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Cap - Socket - 303 - 304 Stainless.

Screws - Low Head - Socket - 316L Stainless
Screws - Low Head - Socket - 316L Stainless

Search Rating: 42%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

316L Stainless Steel. Other sizes available on request.

Hexagon socket cap head with low head. Safety improvements and compact size for equipment and devices. May be used in vacuum chamber applications in clean rooms, Flat Panel Displays, Semiconductor production equipment and devices. All clean washed, preventing the inclusion of oil and foreign particles.


Screws - Cap - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN912
Screws - Cap - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN912

Search Rating: 41%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

Metric Sizes to DIN912. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Related Information:

Knobs Thumb

TopHide Pictures

Knobs - Thumb - With Cap Screw
Knobs - Thumb - With Cap Screw

Search Rating: 38%

Also see combined categories:
All Thumb Knobs
All Knobs

Four types and four colours.

Complete with high tensile alloy steel screw. If stainless steel screws required please order cap screws separately and knobs without screw.


Couplings Rigid

TopHide Pictures

Couplings - Rigid - 2 Piece Clamp - Steel
Couplings - Rigid - 2 Piece Clamp - Steel

Search Rating: 37%

Also see combined categories:
All Rigid Couplings

12L14 Steel

Precision Machined. High torsional load. Non marring, easy to install and adjust. Assemble without moving shafts. Use on hardened shafts, rigid clamp type design, easily machinable. Black finish with alloy steel cap screws. Available with stepped bores and keyways on 5 week delivery.


Screws Grub (Socket Set)

TopHide Pictures

Socket Set Screws - Acetal Tipped - Stainless Steel
Socket Set Screws - Acetal Tipped - Stainless Steel

Search Rating: 36%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Acetal tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.

Related Information:

Socket Set Screws - Solder Tipped - Stainless Steel
Socket Set Screws - Solder Tipped - Stainless Steel

Search Rating: 36%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Solder tipped grub screws. Allow fine adjustment and spreads over the contacting surface so as not to mark or deform it.

Related Information:

Socket Set Screws - Nylon Tipped - 304 Stainless Steel
Socket Set Screws - Nylon Tipped - 304 Stainless Steel

Search Rating: 36%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Nylon tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.

Related Information:

Screws Shoulder

TopHide Pictures

Screws - Shoulder - Socket Head - Carbon Steel
Screws - Shoulder - Socket Head - Carbon Steel

Search Rating: 36%

Also see combined categories:
All Shoulder Screws

Also known as stripper bolts.


Screws Grub (Socket Set)

TopHide Pictures

Socket Set Screws - Dog Point - Carbon Steel
Socket Set Screws - Dog Point - Carbon Steel

Search Rating: 36%

Also see combined categories:
All Dog Point Grub Screws
All Grub Screws

Dog point grub screws

Related Information:

Socket Set Screws - Diamond Knurled Tip - Carbon Steel
Socket Set Screws - Diamond Knurled Tip - Carbon Steel

Search Rating: 36%

Also see combined categories:
All Diamond Knurled Tip Grub Screws
All Grub Screws

Grub screws that grip rough shafts.

Related Information:

Socket Set Screws - Diamond Knurled Tip - Stainless Steel
Socket Set Screws - Diamond Knurled Tip - Stainless Steel

Search Rating: 36%

Also see combined categories:
All Diamond Knurled Tip Grub Screws
All Grub Screws

Grub screws that grip rough shafts.

Related Information:

Socket Set Screws - Flat Tip - Aligning - Carbon Steel
Socket Set Screws - Flat Tip - Aligning - Carbon Steel

Search Rating: 36%

Also see combined categories:
All Flat Ball Tip Grub Screws
All Grub Screws

Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.

Also known as a flat ball tip set screw or a clamping screw.

Related Information:

Socket Set Screws - Flat Tip - Aligning - Stainless Steel
Socket Set Screws - Flat Tip - Aligning - Stainless Steel

Search Rating: 36%

Also see combined categories:
All Flat Ball Tip Grub Screws
All Grub Screws

Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.

Also known as a flat ball tip set screw or a clamping screw.

Related Information:

Socket Set Screws - Rolling Ball Tip - Carbon Steel
Socket Set Screws - Rolling Ball Tip - Carbon Steel

Search Rating: 36%

Also see combined categories:
All Rolling Ball Tip Grub Screws
All Grub Screws

Rolling ball tip for locating into a hole

Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application.

Related Information:

Socket Set Screws - Rolling Ball Tip - Stainless Steel
Socket Set Screws - Rolling Ball Tip - Stainless Steel

Search Rating: 36%

Also see combined categories:
All Rolling Ball Tip Grub Screws
All Grub Screws

Rolling ball tip for locating into a hole

Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application.

Related Information:

Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916
Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916

Search Rating: 36%

Also see combined categories:
All Grub Screws

Standard grub screws. UNC - UNF - BA - METRIC.

Related Information:

Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN916
Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN916

Search Rating: 36%

Also see combined categories:
All Grub Screws

Standard grub screws. UNC - UNF - BA - METRIC.

Related Information:

Screws Countersunk

TopHide Pictures

Screws - Countersunk - Socket - 304 Stainless
Screws - Countersunk - Socket - 304 Stainless

Search Rating: 35%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Stainless Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.

Related Information:

Screws - Countersunk - Socket - 316 Stainless
Screws - Countersunk - Socket - 316 Stainless

Search Rating: 35%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Stainless Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.

Related Information:

Screws - Countersunk - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN7991
Screws - Countersunk - Socket - Titanium Ti-Gr5 - Ti-6Al4v - DIN7991

Search Rating: 34%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Metric Sizes to DIN7991. Used in critical aircraft structural components. UNS R56400. ISO 10642. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Related Information:

Screws Grub (Socket Set)

TopHide Pictures

Socket Set Screws - Cup Point - Titanium - Ti-Gr5 - Ti-6Al4v - DIN916
Socket Set Screws - Cup Point - Titanium - Ti-Gr5 - Ti-6Al4v - DIN916

Search Rating: 34%

Also see combined categories:
All Non Magnetic Grub Screws
All Grub Screws

Standard DIN916 grub screws with cup point. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Related Information:

Socket Set Screws - Flat End - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913
Socket Set Screws - Flat End - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913

Search Rating: 34%

Also see combined categories:
All Non Magnetic Grub Screws
All Grub Screws

Standard DIN913 grub screws with flat end. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Related Information:

Pulleys Timing GT2 2mm

TopHide Pictures

Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock
Pulleys - Timing -  2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock

Search Rating: 33%

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.

Aluminium Alloy. EZI-LOK Hub Clamps together wit a Socket Head Cap Screw. Socket Cap Screw is Supplied with Pulley.

Related Information:

Thread Inserts

TopHide Pictures

Inserts - Self Tapping - For Plastics - Stainless 303
Inserts - Self Tapping - For Plastics - Stainless 303

Search Rating: 33%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Use of installation tool recommended. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from 303 stainless steel. Quantity orders can also be supplied in Brass or 316 Stainless.

Related Information:

Screws Square Head

TopHide Pictures

Screws - Set - Cup Point - Square Head
Screws - Set - Cup Point - Square Head

Search Rating: 32%

Grade 8 hreat treated alloy steel. All screws are threaded to the head.


Screws - Set - Dog Point - Square Head
Screws - Set - Dog Point - Square Head

Search Rating: 32%

Grade 8 hreat treated alloy steel. All screws are threaded to the head.


Screws Cap Head

TopHide Pictures

Screws - Cap - Socket - Aluminium
Screws - Cap - Socket - Aluminium

Search Rating: 32%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

Variety of colours available.

Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN912.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Cap - Socket - Aluminium.

Screws - Cap - Socket - Molybdenum Disulphide Coated
Screws - Cap - Socket - Molybdenum Disulphide Coated

Search Rating: 32%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Cap - Socket - Molybdenum Disulphide Coated.

Screws - Cap - Socket - Nylon
Screws - Cap - Socket - Nylon

Search Rating: 32%

Also see combined categories:
All Socket Cap Screws
All Plastic Screws

UNC - UNF - METRIC - Non Conductive - Non Magnetic.

Related Information:

Screws - Cap - Socket - Titanium CP Grade 1 - DIN912
Screws - Cap - Socket - Titanium CP Grade 1 - DIN912

Search Rating: 32%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

Metric Sizes to DIN912. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.

Related Information:

Pulleys Timing MXL Pitch

TopHide Pictures

Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - EZ-Lock
Pulleys - Timing -  2.032mm Pitch - MXL - 6.4mm Wide - EZ-Lock

Search Rating: 31%

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

2.032mm metric is equivalent to 0.080 pitch imperial. Socket Cap Screw is Supplied with Pulley. Aluminium Alloy.

Related Information:

Thread Inserts

TopHide Pictures

Inserts - Self Tapping - For Plastics - Steel
Inserts - Self Tapping - For Plastics - Steel

Search Rating: 30%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from steel with zinc chromate finish.

Related Information:

Inserts - Self Tapping - For Aluminium - Steel
Inserts - Self Tapping - For Aluminium - Steel

Search Rating: 30%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Related Information:

Knobs Thumb

TopHide Pictures

Knobs - Thumb - For Cap Screws
Knobs - Thumb - For Cap Screws

Search Rating: 30%

Also see combined categories:
All Thumb Knobs
All Knobs

Four Types and four colours to fit onto Socket Head Cap Screws.

To fit Socket Head Cap Screws (Order Separately - See link at base of listing below). Choice of 4 Colours. Choice of 4 styles. Made From Acetal Resin.

Related Information:

Couplings Rigid

TopHide Pictures

Couplings - Rigid - Set Screw
Couplings - Rigid - Set Screw

Search Rating: 30%

Also see combined categories:
All Rigid Couplings

0.35 to 5.1 Nm. Includes steel, stainless steel, brass and aluminium.

Quality Class Precision: Bore Tolerance +0.013 / - 0.000 concentric within 0.0127mm T.I.R. Quality Class Commercial: Bore Tolerance +0.051 / -0.000.

Related Information:

Hoist Rings

TopHide Pictures

Rings - Hoist - Stationary - Without Screws
Rings - Hoist - Stationary - Without Screws

Search Rating: 29%

Also see combined categories:
All Hoist Rings

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.

Related Information:

Rings - Hoist - Stationary - With Screws
Rings - Hoist - Stationary - With Screws

Search Rating: 29%

Also see combined categories:
All Hoist Rings

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.


Ball Screw Accessories

TopHide Pictures

Mounts - Universal - For Acme Thread and Ballscrews
Mounts - Universal - For Acme Thread and Ballscrews

Search Rating: 29%

Use grade 8 hex socket head cap screws for mounting.


Ball Screws Nook Series

TopHide Pictures

Ballscrew - Nook Series - Right Hand
Ballscrew - Nook Series - Right Hand

Search Rating: 29%

Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

High quality alloy steel, induction hardened to RC 56-60. Protective black oxide finish. Lead accurate by at least 0.00083mm per mm.


Latches T-Handle

TopHide Pictures

Latches - T-Handle - Basic
Latches - T-Handle - Basic

Search Rating: 28%

Made of die cast zinc with matte black polyester powder coated and zinc alloy plated steel parts. Max working load 44kg. Average ultimate load 88kg. Three hole mount installation. 8-32 screws and lockwashers supplied for max 4mm door thickness.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.



Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 126934 products in 3077 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.