Small Parts & Bearings - an MBA company

6 Inch Bandsaw Vertical Bench Model Gmc Parts Categories


Power Tool Parts


6 Inch Bandsaw Vertical Bench Model GMC Parts
6 Inch Bandsaw Vertical Bench Model GMC Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


B5006 Bandsaw - Table Mounted GMC Parts
B5006 Bandsaw - Table Mounted GMC Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


1-3HP Bench Sander 4 Inch GMC Parts
1-3HP Bench Sander 4 Inch GMC Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Multi Models Dyson Parts
Multi Models Dyson Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


5230 1970 Models Abu Garcia Parts
5230 1970 Models Abu Garcia Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Accessories - Hobby - Aircraft
Accessories - Hobby - Aircraft


Generic Parts. Specific model parts may also be found by typing the model number into the search box. Reinforced Tape, Masking Tape, Micro Gear Nose, Gear Mech Retracts, Retractable Wing Tailwheels, gas struts



Accessories - Hobby - Helicopter
Accessories - Hobby - Helicopter


Generic Parts. Specific model parts may also be found by typing the model number into the search box. Training Gear, Polished Tuned Muffler, Heli Pitch, Foam Stand



Accessories - Hobby - Car and Buggy
Accessories - Hobby - Car and Buggy


Generic Parts. Specific model parts may also be found by typing the model number into the search box. Fail safes, aerials, heat sinks, body clips, tune pipe, clutch bell, bump start, engine break stand, engine fans, antenna tubes and tire warmers.

Includes Kyosho pull starts.


Collectibles - Metal Motorcycles
Collectibles - Metal Motorcycles


Beautiful model motorbikes in various styles including choppers, road bikes and vintage designs.

Made from industrial parts including bearings, screws, nuts, springs, chain links, rod, tubing and other parts. Two colours available - gunmetal grey or copper finish. Each bike is hand made, and therefore there may be minor differences between the bikes of a particular model. Re-Cycle motorbikes are a limited edition set of 20.


Hooks - Vertical Mounted - Heavy Duty - 304 Stainless
Hooks - Vertical Mounted - Heavy Duty - 304 Stainless


Mirror finish with 20kg Load Capacity. Ideal for corrosive environments.



Tensioner - Vertical Mount
Tensioner - Vertical Mount

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 88.9mm travel through the use of the vertical slot. Head is drilled and tapped to accept 38.1mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner.

Related Information:


Hooks - Standard - Vertical Mount - 304 Stainless
Hooks - Standard - Vertical Mount - 304 Stainless


Mirror finish with 15kg Load Capacity. Ideal for corrosive environments.



Dental Handpiece Parts - Other
Dental Handpiece Parts - Other


A list of additional parts available for handpieces. Also see category Dental Handpiece Parts.

This category contains miscellaneous dental parts excluding tools, bearings and o-rings. Parts for specific handpiece models can be found under the brand name on the internet store main index.

Related Information:


Mounts - Machinery - Industrial - Heavy Duty
Mounts - Machinery - Industrial - Heavy Duty

Also see combined categories:
All Industrial Machine Mounts

High strength machined components. Rapid installation and leveling. 80% vibration reduction. Vertical and horizontal isolation.

For milling mchines, presses, injection molding, packaging machines. Industrial machine mount designed with high strength construction for reduction of both shock and vibration. Prevents vibration from affecting other machines and protects mounted equipment from external vibration effects. Provides precision leveling with large support plate and meets OSHA standards by preventing machinery walking.


Mounts - Machinery - Industrial - Medium Duty
Mounts - Machinery - Industrial - Medium Duty

Also see combined categories:
All Industrial Machine Mounts

High strength machined components. Rapid installation and leveling. 80% vibration reduction. Vertical and horizontal isolation.

For milling mchines, presses, injection molding, packaging machines. Industrial machine mount designed with high strength construction for reduction of both shock and vibration. Prevents vibration from affecting other machines and protects mounted equipment from external vibration effects. Provides precision leveling with large support plate and meets OSHA standards by preventing machinery walking.


Mounts - Vibration - Isolation Pads - General Purpose
Mounts - Vibration - Isolation Pads - General Purpose

Also see combined categories:
All Isolation Pad Mounts

For installation of industrial machinery where the ratio of shear loads to vertical loads is less than or equal to 1 to 5.

Base is unthreaded. The stud rests on the pad and is not threaded in or fastened to the pad. Self aligning feature compensates for uneven floors without sacrificing stability. Scientifically designed diamond suction cells of the neoprene insert firmly anchor the machine to the floor. Recommended for a wide range of industrial machinery and equipment where simple precise leveling is required. 25.4mm level adjustment.


Mounts - Machinery - Industrial - Pneumatic Elastomeric
Mounts - Machinery - Industrial - Pneumatic Elastomeric

Also see combined categories:
All Industrial Machine Mounts

Well suited for applications requiring high deflection isolation. Vibration can be reduced as much as 90%. High stability horizontal to vertical stiffness ratio 1 to 1.

Heavy wall construction. Significant shock loads are deflected to the outer wall of the mount. Will not bottom out if properly installed. Will continue to support and isolateeven with no air pressure. Leveling is easily accomplished by adding or removing air.


Mounts - Rectangular - 4 Bolt
Mounts - Rectangular - 4 Bolt

Also see combined categories:
All Rectangular Mounts

Rectangular elastomer component bonded with two steel plates.

Low installation height provides good stability. Effectively isolates against horizontal and vertical vibrations. High deflection capacity in horiziontal direction whilst deflection is low in vertical. Oil and grease resistant. Meets OSHA anchoring standards. Ideal use in presses, blowers, pumps, vibrators, rolling mills, crushers etc.


Mounts - Vibration - Isolation Pads - Compression Shear
Mounts - Vibration - Isolation Pads - Compression Shear

Also see combined categories:
All Isolation Pad Mounts

Durable, high quality mount combines effective compression and shear isolation from vibration and shock with the convenience of an internal leveling device.

Deep cavity design allows excellent vibration and shock control in both the vertical and horizontal directions. Heavy duty ductile iron cover and chemically resistant neoprene insert. Internal leveling device levels up to 12.7mm. Specially designed recess on top of cover hosues a rubber washer. Concentric rings on base of neoprene insert prevents walking or creeping. Ideal for lathes, milling machines, punch presses, printing machines, shears, brakes, injection moulding machines, grinders etc. Includes all necessary hardware.


Gearboxes - Right Angle - Model RA 0305-0305-0187 - 30.5 x 30.5 x 18.7mm
Gearboxes - Right Angle - Model RA 0305-0305-0187 - 30.5 x  30.5 x 18.7mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 1:1 Ratio. B332 Series. Miniature gearbox.

1:1 Ratio Only / 4mm Shafts. Min Torque 0.5 Ncm. Backlash Approx 2o. Approx Max Temperature 80 oC. Suitable for manual and short term drive application.


Gearboxes - Right Angle - Model RA 0400-0400-0250 - 40.0 x 40.0 x 25.0mm
Gearboxes - Right Angle - Model RA 0400-0400-0250 - 40.0 x  40.0 x 25.0mm

Also see combined categories:
All Right Angle Gearboxes

BLH20 Series. Miniature gearbox.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Related Information:


Gearboxes - Right Angle - Model RA 0445-0445-0254 - 44.45 x 44.45 x 25.4mm
Gearboxes - Right Angle - Model RA 0445-0445-0254 - 44.45 x  44.45 x 25.4mm

Also see combined categories:
All Right Angle Gearboxes

BGA24-1 (1 to 1 Ratio)

Anodised Aluminium Housing. 303 Stainless Shafts. Minus 20 to Plus 80 oC Temperature Range. Max. Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Alvania Grease EP2.


Gearboxes - Right Angle - Model RA 0550-0550-0340 - 55.0 x 55.0 x 34.0mm
Gearboxes - Right Angle - Model RA 0550-0550-0340 - 55.0 x  55.0 x 34.0mm

Also see combined categories:
All Right Angle Gearboxes

BLH30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Related Information:


Gearboxes - Right Angle - Model RA 0635-0635-0381 - 63.5 x 63.5 x 38.1mm
Gearboxes - Right Angle - Model RA 0635-0635-0381 - 63.5 x  63.5 x 38.1mm

Also see combined categories:
All Right Angle Gearboxes

BGA31-1 (1 to 1 Ratio)

Anodised Aluminium Housing. 303 Stainless Shafts. Minus 20 to Plus 80 oC Temperature Range. Max. Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Alvania Grease EP2.


Gearboxes - Right Angle - Model RA 0750-0440-0440 - 75.0 x 44.0 x 44.0mm
Gearboxes - Right Angle - Model RA 0750-0440-0440 - 75.0 x  44.0 x  44.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 1.6 Nm-5.0 Nm ratios 6:1 to 24:1. BLN20 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.


Gearboxes - Right Angle - Model RA 0750-0750-0440 - 75.0 x 75.0 x 44.0mm
Gearboxes - Right Angle - Model RA 0750-0750-0440 - 75.0 x  75.0 x 44.0mm

Also see combined categories:
All Right Angle Gearboxes

BLH40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Related Information:


Gearboxes - Right Angle - Model RA 0870-0660-0600 - 87.0 x 66.0 x 60.0mm
Gearboxes - Right Angle - Model RA 0870-0660-0600 - 87.0 x  66.0 x 60.0mm

Also see combined categories:
All Right Angle Gearboxes

1 : 1 ratio only. BL18 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1o. Lubrication: Greased for life - Shell Nerita Grease HV. Weight: 1.3kg.


Gearboxes - Right Angle - Model RA 0980-0600-0600 - 98.0 x 60.0 x 60.0mm
Gearboxes - Right Angle - Model RA 0980-0600-0600 - 98.0 x  60.0 x  60.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 5 Nm-15 Nm ratios 6:1 to 24:1. BLN30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.


Gearboxes - Right Angle - Model RA 1000-1000-0600 -100.0 x 100.0 x 60.0mm
Gearboxes - Right Angle - Model RA 1000-1000-0600 -100.0 x 100.0 x 60.0mm

Also see combined categories:
All Right Angle Gearboxes

BLH50 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Related Information:


Gearboxes - Right Angle - Model RA 1250-1250-0800 -125.0 x 125.0 x 80.0mm
Gearboxes - Right Angle - Model RA 1250-1250-0800 -125.0 x 125.0 x 80.0mm

Also see combined categories:
All Right Angle Gearboxes

BLH60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Related Information:


Gearboxes - Right Angle - Model RA 1320-0800-0800 -132.0 x 80.0 x 80.0mm
Gearboxes - Right Angle - Model RA 1320-0800-0800 -132.0 x  80.0 x  80.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 13 Nm-43 Nm ratios 6:1 to 24:1. BLN40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.


Gearboxes - Right Angle - Model RA 1400-1400-0980 -140.0 x 140.0 x 98.0mm
Gearboxes - Right Angle - Model RA 1400-1400-0980 -140.0 x 140.0 x 98.0mm

Also see combined categories:
All Right Angle Gearboxes

BLH70 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.


Gearboxes - Right Angle - Model RA 1900-1200-1200 -190.0 x 120.0 x 120.0mm
Gearboxes - Right Angle - Model RA 1900-1200-1200 -190.0 x 120.0 x 120.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 40.6 Nm-110 Nm ratios 6:1 to 24:1. BLN50 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.


Gearboxes - Right Angle - Model RA 2450-1600-1600 -245.0 x 160.0 x 160.0mm
Gearboxes - Right Angle - Model RA 2450-1600-1600 -245.0 x 160.0 x 160.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 86 Nm-270 Nm ratios 6:1 to 24:1. BLN60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.


Gearboxes - Right Angle - Model RA 3000-2000-2000 -300.0 x 200.0 x 200.0mm
Gearboxes - Right Angle - Model RA 3000-2000-2000 -300.0 x 200.0 x 200.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 215 Nm-550 Nm ratios 6:1 to 24:1. BLN70 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.


Fuel - Accessories
Fuel - Accessories


Includes fuel tanks for World Model Aircraft



Screws - Wood - Brass
Screws - Wood - Brass


Brass wood screws for models



Mounts - Leveling - Stud Type - Black
Mounts - Leveling - Stud Type - Black

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

For leveling machine tools, electronic racks, benches etc on uneven surfaces. Adjusters.

Load is distributed over 120o of full radial contact rather than a single radial contact point, providing greater weight distribution between the ball and pad. Zinc plated steel with case hardened ball.


Mounts - Leveling - Socket Type - Gold Chromate
Mounts - Leveling - Socket Type - Gold Chromate

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

For leveling machine tools, electronic racks, benches etc on uneven surfaces. Use your own stud. Adjusters.



Mounts - Leveling - Stud Type - Gold Chromate
Mounts - Leveling - Stud Type - Gold Chromate

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

For leveling machine tools, electronic racks, benches etc on uneven surfaces. Adjusters.

Load is distributed over 120o of full radial contact rather than a single radial contact point, providing greater weight distribution between the ball and pad. Zinc plated steel with case hardened ball.


Mounts - Leveling - Socket Type - 316 Stainless Steel
Mounts - Leveling - Socket Type - 316 Stainless Steel

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

For leveling machine tools, electronic racks, benches etc on uneven surfaces. Adjusters.



Bearings - Dental Applications
Bearings - Dental Applications


See Dental Handpiece Bearings and Orings for applications by model.

This listing is the basic features of various bearings for dental applications. Please contact us for a dental application list. See - Dental Handpiece Bearings and Orings for applications by model.


Motors - DC 6mm Diameter
Motors - DC  6mm Diameter

Also see combined categories:
All DC Motors

Our smallest motors at an affordable price.

Various models 10000 to 30000 rpm. Low starting voltage of Less than0.8V. Rated Voltage 1.3V. Less than 43 dB Mechanical Noise Level. 100 hours / 100000 turns mechanical life. Clockwise rotation when viewed from shaft end. Not recommended for reversing.

Related Information:


Mounts - Leveling - Socket Type - Black
Mounts - Leveling - Socket Type - Black

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.



Mounts - Leveling - Socket Type - Steel
Mounts - Leveling - Socket Type - Steel

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Nickel Plated Steel. Adjusters.



Parts Boxes - Clear Plastic
Parts Boxes - Clear Plastic

Also see combined categories:
All Parts Boxes

Plastics clear compartmented parts boxes with flip lids.

Plastic hinged lid. Quality catch to secure contents. Ideal for storing small parts. Includes Fischer brand and others. Also includes a small membrane box for displaying small items like coins or jewellery.


Parts Boxes - Grey Plastic
Parts Boxes - Grey Plastic

Also see combined categories:
All Parts Boxes

Fischer Plastics grey parts boxes with adjustable dividers and open top.

Open top. Fits most standard shelving. Ideal for storing small parts. Dividers can be removed, added or adjusted. Comes with dividers to make number of compartments shown - but additional dividers can be purchased.


Mounts - Leveling - Socket Type - 303 Stainless Steel
Mounts - Leveling - Socket Type - 303 Stainless Steel

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.



Mounts - Leveling - Socket Type - Gold Chromate 2
Mounts - Leveling - Socket Type - Gold Chromate 2

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.



Mounts - Leveling - Socket Type - Steel - Black Chromate
Mounts - Leveling - Socket Type - Steel - Black Chromate

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.



Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124370 products in 2774 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124370 products in 2774 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.