Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Related Information:
64 DP Mitre Gears Precision Matched
Combined Categories:
Click to see all Imperial Bevel Gear Sets
Product features, properties and information
Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.
Stainless : 303 Stainless Steel.
Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting.
AGMA Q10 Quality.
20o Pressure Angle.
See Gears - Mitre for 1:1 ratios.
All dimensions on this website are shown in mm unless otherwise indicated.
Click on the linked part numbers in the table below for more details.


Ratio: 1.5 to 1
Part Number: GB-S32-D64-048-AL-C
Photo is close in appearance
to actual product.
Retail Price: A$105.33
Online Price: A$92.75
Part Number
GB-S32-D64-048-AL-C
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 1.5 to 1
Teeth (No.): 32 / 48
Material: Both Aluminium
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 19.050 mm
(0.500 in.)
End to centre (A): 16.66 mm
(0.656 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Clamp Type Hub
Hub Diameter (D): 6.350 mm
(0.250 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
Part Number: GB-S32-D64-048-AL-G
Photo is close in appearance
to actual product.
Retail Price: $119.41
Online Price: $105.55
Part Number
GB-S32-D64-048-AL-G
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 1.5 to 1
Teeth (No.): 32 / 48
Material: Both Aluminium
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 19.050 mm
(0.500 in.)
End to centre (A): 16.66 mm
(0.656 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Set Screw 4-40
Hub Diameter (D): 9.525 mm
(0.375 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
Part Number: GB-S32-D64-048-S3-C
Photo is close in appearance
to actual product.
Retail Price: $133.82
Online Price: $118.65
Part Number
GB-S32-D64-048-S3-C
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 1.5 to 1
Teeth (No.): 32 / 48
Material: Stainless
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 19.050 mm
(0.500 in.)
End to centre (A): 16.66 mm
(0.656 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Clamp Type Hub
Hub Diameter (D): 6.350 mm
(0.250 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
Part Number: GB-S32-D64-048-S3-S
Photo is close in appearance
to actual product.
Retail Price: $142.73
Online Price: $126.75
Part Number
GB-S32-D64-048-S3-S
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 1.5 to 1
Teeth (No.): 32 / 48
Material: Stainless
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 19.050 mm
(0.500 in.)
End to centre (A): 16.66 mm
(0.656 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Set Screw 4-40
Hub Diameter (D): 9.525 mm
(0.375 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
Part Number: GB-S32-D64-048-AL3-C
Photo is close in appearance
to actual product.
Retail Price: $127.22
Online Price: $112.65
Part Number
GB-S32-D64-048-AL3-C
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 1.5 to 1
Teeth (No.): 32 / 48
Material: Stainless / Aluminium
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 19.050 mm
(0.500 in.)
End to centre (A): 16.66 mm
(0.656 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Clamp Type Hub
Hub Diameter (D): 6.350 mm
(0.250 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
Part Number: GB-S32-D64-048-AL3-S
Photo is close in appearance
to actual product.
Retail Price: $136.57
Online Price: $121.15
Part Number
GB-S32-D64-048-AL3-S
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 1.5 to 1
Teeth (No.): 32 / 48
Material: Stainless / Aluminium
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 19.050 mm
(0.500 in.)
End to centre (A): 16.66 mm
(0.656 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Set Screw 4-40
Hub Diameter (D): 9.525 mm
(0.375 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.

Ratio: 2 to 1
Part Number: GB-S21-D64-048-AL-C
Photo is close in appearance
to actual product.
Retail Price: $105.55
Online Price: $92.95
Part Number
GB-S21-D64-048-AL-C
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 2 to 1
Teeth (No.): 32 / 64
Material: Both Aluminium
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 25.400 mm
(0.500 in.)
End to centre (A): 19.05 mm
(0.750 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Clamp Type Hub
Hub Diameter (D): 6.350 mm
(0.250 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
Part Number: GB-S21-D64-048-AL-G
Photo is close in appearance
to actual product.
Retail Price: $125.02
Online Price: $110.65
Part Number
GB-S21-D64-048-AL-G
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 2 to 1
Teeth (No.): 32 / 64
Material: Both Aluminium
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 25.400 mm
(0.500 in.)
End to centre (A): 19.05 mm
(0.750 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Set Screw 4-40
Hub Diameter (D): 9.525 mm
(0.375 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
Part Number: GB-S21-D64-048-S3-C
Photo is close in appearance
to actual product.
Retail Price: $134.03
Online Price: $118.86
Part Number
GB-S21-D64-048-S3-C
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 2 to 1
Teeth (No.): 32 / 64
Material: Stainless
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 25.400 mm
(0.500 in.)
End to centre (A): 19.05 mm
(0.750 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Clamp Type Hub
Hub Diameter (D): 6.350 mm
(0.250 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
Part Number: GB-S21-D64-048-S3-S
Photo is close in appearance
to actual product.
Retail Price: $147.57
Online Price: $131.15
Part Number
GB-S21-D64-048-S3-S
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 2 to 1
Teeth (No.): 32 / 64
Material: Stainless
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 25.400 mm
(0.500 in.)
End to centre (A): 19.05 mm
(0.750 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Set Screw 4-40
Hub Diameter (D): 9.525 mm
(0.375 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
Part Number: GB-S21-D64-048-AL3-C
Photo is close in appearance
to actual product.
Retail Price: $124.14
Online Price: $109.85
Part Number
GB-S21-D64-048-AL3-C
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 2 to 1
Teeth (No.): 32 / 64
Material: Stainless / Aluminium
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 25.400 mm
(0.500 in.)
End to centre (A): 19.05 mm
(0.750 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Clamp Type Hub
Hub Diameter (D): 6.350 mm
(0.250 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
Part Number: GB-S21-D64-048-AL3-S
Photo is close in appearance
to actual product.
Retail Price: $141.19
Online Price: $125.35
Part Number
GB-S21-D64-048-AL3-S
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 2 to 1
Teeth (No.): 32 / 64
Material: Stainless / Aluminium
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 25.400 mm
(0.500 in.)
End to centre (A): 19.05 mm
(0.750 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Set Screw 4-40
Hub Diameter (D): 9.525 mm
(0.375 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.

Ratio: 3 to 1
Part Number: GB-S31-D64-048-AL-C
Photo is close in appearance
to actual product.
Retail Price: $118.42
Online Price: $104.65
Part Number
GB-S31-D64-048-AL-C
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 3 to 1
Teeth (No.): 32 / 96
Material: Both Aluminium
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 38.100 mm
(0.500 in.)
End to centre (A): 25.40 mm
(1.000 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Clamp Type Hub
Hub Diameter (D): 6.350 mm
(0.250 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
Part Number: GB-S31-D64-048-AL-G
Photo is close in appearance
to actual product.
Retail Price: $136.12
Online Price: $120.75
Part Number
GB-S31-D64-048-AL-G
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 3 to 1
Teeth (No.): 32 / 96
Material: Both Aluminium
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 38.100 mm
(0.500 in.)
End to centre (A): 25.40 mm
(1.000 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Set Screw 4-40
Hub Diameter (D): 9.525 mm
(0.375 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
Part Number: GB-S31-D64-048-S3-C
Photo is close in appearance
to actual product.
Retail Price: $148.34
Online Price: $131.85
Part Number
GB-S31-D64-048-S3-C
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 3 to 1
Teeth (No.): 32 / 96
Material: Stainless
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 38.100 mm
(0.500 in.)
End to centre (A): 25.40 mm
(1.000 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Clamp Type Hub
Hub Diameter (D): 6.350 mm
(0.250 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
Part Number: GB-S31-D64-048-S3-S
Photo is close in appearance
to actual product.
Retail Price: $160.66
Online Price: $143.06
Part Number
GB-S31-D64-048-S3-S
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 3 to 1
Teeth (No.): 32 / 96
Material: Stainless
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 38.100 mm
(0.500 in.)
End to centre (A): 25.40 mm
(1.000 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Set Screw 4-40
Hub Diameter (D): 9.525 mm
(0.375 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
Part Number: GB-S31-D64-048-AL3-C
Photo is close in appearance
to actual product.
Retail Price: $135.80
Online Price: $120.45
Part Number
GB-S31-D64-048-AL3-C
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 3 to 1
Teeth (No.): 32 / 96
Material: Stainless / Aluminium
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 38.100 mm
(0.500 in.)
End to centre (A): 25.40 mm
(1.000 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Clamp Type Hub
Hub Diameter (D): 6.350 mm
(0.250 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
Part Number: GB-S31-D64-048-AL3-S
Photo is close in appearance
to actual product.
Retail Price: $151.53
Online Price: $134.75
Part Number
GB-S31-D64-048-AL3-S
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 3 to 1
Teeth (No.): 32 / 96
Material: Stainless / Aluminium
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 38.100 mm
(0.500 in.)
End to centre (A): 25.40 mm
(1.000 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Set Screw 4-40
Hub Diameter (D): 9.525 mm
(0.375 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.

Ratio: 4 to 1
Part Number: GB-S41-D64-048-AL-C
Photo is close in appearance
to actual product.
Retail Price: $129.75
Online Price: $114.95
Part Number
GB-S41-D64-048-AL-C
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 4 to 1
Teeth (No.): 32 / 128
Material: Both Aluminium
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 50.800 mm
(0.500 in.)
End to centre (A): 31.75 mm
(1.250 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Clamp Type Hub
Hub Diameter (D): 6.350 mm
(0.250 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
Part Number: GB-S41-D64-048-AL-G
Photo is close in appearance
to actual product.
Retail Price: $147.02
Online Price: $130.65
Part Number
GB-S41-D64-048-AL-G
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Ratio: 4 to 1
Teeth (No.): 32 / 128
Material: Both Aluminium
Bore (d): 4.762 (+0.008/0.005) mm
(0.187 in.)
Pitch Diameter (PD): 12.700 / 50.800 mm
(0.500 in.)
End to centre (A): 31.75 mm
(1.250 in.)
End to Centre (B): 14.28 mm
(0.562 in.)
Locking Type: Set Screw 4-40
Hub Diameter (D): 9.525 mm
(0.375 in.)
Face Width (FW): 4.064 mm
(0.160 in.)
(Not applicable to telephone or in shop purchases)
(GST tax will only apply if the order is delivered to an Australian address)
Pricing is in AUD ($). Change pricing using the selector at the top right of any page.
Ratio 4 to 1 is continued next page...
This is page 1 of 2 showing items 1 to 20 of 24 items.
PAGE INDEX
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Related Information:
64 DP Mitre Gears Precision Matched
Combined Categories:
Click to see all Imperial Bevel Gear Sets
Other Store Pages
Click Page Banner Below
TopMain Pages
Click Page Banner Below
TopTop