u groove pulleys (Stocked Items Only)


Category Matches

Pulleys Grooved

TopHide Pictures

Pulleys - Geared - Hobby
Pulleys - Geared - Hobby

Search Rating: 100%

Also see combined categories:
All Flat Belt Pulleys

Small UPE grooved pulleys suitable for driving small o'rings or rubber bands. O-rings should be less than 2mm section diameter.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Pulleys - Geared - Hobby.

Pulleys - U Groove - Plastic
Pulleys - U Groove - Plastic

Search Rating: 100%

Also see combined categories:
All U Groove Bearings and Pulleys

Acetal Body with Brass Insert. Use with O-Rings or Rounthane Belts.

Related Information:

Pulleys - U Groove - Plastic - Hobby
Pulleys - U Groove - Plastic - Hobby

Search Rating: 99%

Also see combined categories:
All U Groove Bearings and Pulleys

Plastic with no locking method. Use with O-Rings or Rounthane Belts.

Related Information:

Pulleys - U Groove - Idler - Steel - With Bearing
Pulleys - U Groove - Idler - Steel - With Bearing

Search Rating: 98%

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Steel with Steel Ball Bearings

Use with round belts such as Rounthane or O-Rings.

Related Information:

Pulleys - U Groove - Idler - Plastic - With Plain Bore
Pulleys - U Groove - Idler - Plastic - With Plain Bore

Search Rating: 97%

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings.

Related Information:

Pulley Blocks

TopHide Pictures

Pulleys - Blocks - Eye - Fixed
Pulleys - Blocks - Eye - Fixed

Search Rating: 72%

Also see combined categories:
All Pulley Blocks

Steel side plates with drop forged hooks. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.


Pulleys - Blocks - Eye - Swivel
Pulleys - Blocks - Eye - Swivel

Search Rating: 72%

Also see combined categories:
All Pulley Blocks

Steel side plates. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.


Pulleys - Blocks - Flat
Pulleys - Blocks - Flat

Search Rating: 72%

Also see combined categories:
All Pulley Blocks

Steel side plates with drop forged hooks. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.


Pulleys Idler

TopHide Pictures

Pulleys - Timing - Idler
Pulleys - Timing - Idler

Search Rating: 72%

Also see combined categories:
All Idler Pulleys

Complete with Needle Roller Bearing.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.

Related Information:

Pulleys Vee

TopHide Pictures

Pulleys - Vee - A - 4L - Single Row - For QD Bushing
Pulleys - Vee - A - 4L - Single Row - For QD Bushing

Search Rating: 72%

Also see combined categories:
All Vee Pulleys A Section 12.5 and 12.7mm Top Width

Cast iron pulleys. QD bushings are used to vary the bore sizes.

Related Information:


Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron
Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron

Search Rating: 72%

Also see combined categories:
All Vee Pulleys A Section 12.5 and 12.7mm Top Width

Dual purpose pulleys suit A section and M section belts

To determine the pitch diameter for M section deduct 8.636mm (0.34 inch) from the pitch diameter listed.

Related Information:

Pulleys - Vee - B - 5L - Single Row - For QD Bushing
Pulleys - Vee - B - 5L - Single Row - For QD Bushing

Search Rating: 72%

Also see combined categories:
All Vee Pulleys B Section 15.9 and 16.5mm Top Width

Cast iron pulleys. QD bushings are used to vary the bore sizes.

Related Information:

Pulleys - Vee - M - 3L - Single Row - Through Bore - Aluminium
Pulleys - Vee - M - 3L - Single Row - Through Bore - Aluminium

Search Rating: 72%

Also see combined categories:
All Vee Pulleys M Section 10mm Top Width

Stenco vee pulleys

Related Information:

Pulleys - Vee - M - 3L - Single Row - Through Bore - Cast Iron
Pulleys - Vee - M - 3L - Single Row - Through Bore - Cast Iron

Search Rating: 72%

Also see combined categories:
All Vee Pulleys M Section 10mm Top Width

Dual purpose pulleys suit A section and M section belts

To determine the pitch diameter for A section add 8.636mm (0.34 inch) to the pitch diameter listed.

Related Information:


Pulleys Timing 40DP LT Pitch

TopHide Pictures

Pulleys - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide - Through Bore
Pulleys - Timing -  2.073mm Pitch - 40DP - 4.8mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 4.7 to 4.8mm wide. Also known as LT.

Aluminium Alloy. Finished Through Bore Ready To Assemble.

Related Information:

Pulleys - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Insert
Pulleys - Timing -  2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Insert

Search Rating: 72%

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Also known as LT. Moulded single or double flange. With brass insert.

Related Information:

Pulleys - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain
Pulleys - Timing -  2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain

Search Rating: 72%

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Also known as LT. Moulded single or double flange. No locking device.

Related Information:

Pulleys - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide - Through Bore
Pulleys - Timing -  2.073mm Pitch - 40DP - 7.9mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 7.9 to 8.0mm wide. Also known as LT.

Aluminium Alloy. Finished Through Bore Ready To Assemble.

Related Information:

Pulleys Timing AT5 5mm

TopHide Pictures

Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 10mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:

Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 16mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:

Pulleys Timing GT2 2mm

TopHide Pictures

Pulleys - Timing - 2.000mm Pitch - GT2 - 3mm Wide - Through Bore
Pulleys - Timing -  2.000mm Pitch - GT2 - 3mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 2mm Pitch Timing Belts.

Aluminium Alloy. Finished Bores with Set Screws.

Related Information:

Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock Hub
Pulleys - Timing -  2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock Hub

Search Rating: 72%

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.

Aluminium Alloy. EZI-LOK Hub Clamps together wit a Socket Head Cap Screw. Socket Cap Screw is Supplied with Pulley.

Related Information:

Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Plastic - Insert
Pulleys - Timing -  2.000mm Pitch - GT2 - 6mm Wide - Plastic - Insert

Search Rating: 72%

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Brass insert.

Related Information:

Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Plastic - Plain
Pulleys - Timing -  2.000mm Pitch - GT2 - 6mm Wide - Plastic - Plain

Search Rating: 72%

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. No locking device.

Related Information:

Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Through Bore
Pulleys - Timing -  2.000mm Pitch - GT2 - 6mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.

Aluminium Alloy. Set Screw and EZI-LOK Hubs.

Related Information:

Pulleys - Timing - 2.000mm Pitch - GT2 - 9mm Wide - Through Bore
Pulleys - Timing -  2.000mm Pitch - GT2 - 9mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 9mm Wide.

Aluminium Alloy. Set Screw Locking.

Related Information:

Pulleys - Timing - 2.000mm Pitch - GT2 - STOCK - Aluminium
Pulleys - Timing -  2.000mm Pitch - GT2 - STOCK - Aluminium

Search Rating: 72%

Also see combined categories:
All 2mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

Related Information:

Pulleys Timing GT2 3mm

TopHide Pictures

Pulleys - Timing - 3.000mm Pitch - GT2 - 6mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - GT2 -  6mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 6mm Wide.

Aluminium Alloy. Finished through bore ready to assemble.

Related Information:

Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - Plastic - Insert
Pulleys - Timing -  3.000mm Pitch - GT2 -  9mm Wide - Plastic - Insert

Search Rating: 72%

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Brass insert.

Related Information:


Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - GT2 -  9mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide.

Finished through bore ready for assembly. Set screw locking.

Related Information:

Pulleys - Timing - 3.000mm Pitch - GT2 - STOCK - Aluminium
Pulleys - Timing -  3.000mm Pitch - GT2 - STOCK - Aluminium

Search Rating: 72%

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

Related Information:

Pulleys Timing GT2 5mm

TopHide Pictures

Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - GT2 - 15mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide. Aluminium, steel and cast iron.

Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores.

Related Information:

Pulleys Timing H Pitch 12.7mm

TopHide Pictures

Pulleys - Timing - 12.700mm Pitch - H - 25.4mm Wide - Taperlock
Pulleys - Timing -  12.700mm Pitch - H - 25.4mm Wide - Taperlock

Search Rating: 72%

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Taperlock bush required for bore.

Cast Iron and Steel.

Related Information:

Pulleys Timing HTD 3mm

TopHide Pictures

Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - HTD - 6mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

Aluminium alloy. Finished through bore ready to assemble. Set screw locking.

Related Information:

Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless
Pulleys - Timing -  3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless

Search Rating: 72%

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Moulded single or double flange. No hub.

Suitable for use with shaftloc sleeves.

Related Information:

Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Insert
Pulleys - Timing -  3.000mm Pitch - HTD - 9mm Wide - Plastic - Insert

Search Rating: 72%

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Brass insert.

Related Information:

Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - HTD - 9mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.

Aluminium alloy. Finished through bore ready to assemble. Set screw locking.

Related Information:

Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium
Pulleys - Timing -  3.000mm Pitch - HTD - STOCK - Aluminium

Search Rating: 72%

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

Related Information:

Pulleys Timing HTD 5mm

TopHide Pictures

Pulleys - Timing - 5.000mm Pitch - HTD - 15mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - HTD -  15mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 15.0 to 16.0mm wide.

Aluminium Alloy. Finished bore with set screw locking.

Related Information:

Pulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Plastic - Fairloc Hub
Pulleys - Timing -  5.000mm Pitch - HTD - 9mm Wide - Plastic - Fairloc Hub

Search Rating: 72%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Fairloc locking hub.

Related Information:

Pulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Plastic - Plain
Pulleys - Timing -  5.000mm Pitch - HTD - 9mm Wide - Plastic - Plain

Search Rating: 72%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. No locking device.

Related Information:

Pulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - HTD - 9mm Wide  - Through Bore

Search Rating: 72%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.

Related Information:

Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - HTD - STOCK - Aluminium

Search Rating: 72%

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

Related Information:

Pulleys Timing L Pitch 9.53mm

TopHide Pictures

Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Taperlock
Pulleys - Timing -  9.525mm Pitch - L -  12.7mm Wide - Taperlock

Search Rating: 72%

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.

Black oxide coated steel or cast iron.

Related Information:

Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Through Bore
Pulleys - Timing -  9.525mm Pitch - L -  12.7mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts.

Aluminium alloy and steel. Aluminium have finished bore with set screw. Steel have either finished or unfinished bore as shown in the listings.

Related Information:

Pulleys - Timing - 9.525mm Pitch - L - 19.1mm Wide - Taperlock
Pulleys - Timing -  9.525mm Pitch - L -  19.1mm Wide - Taperlock

Search Rating: 72%

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.

Related Information:

Pulleys Timing MXL Pitch

TopHide Pictures

Pulleys - Timing - 2.032mm Pitch - MXL - 3.2mm Wide - Through Bore
Pulleys - Timing -  2.032mm Pitch - MXL - 3.2mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 3.0 to 3.2mm wide.

2.032mm metric is equivalent to 0.080 pitch imperial.

Related Information:

Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - EZ-Lock
Pulleys - Timing -  2.032mm Pitch - MXL - 6.4mm Wide - EZ-Lock

Search Rating: 72%

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

2.032mm metric is equivalent to 0.080 pitch imperial. Socket Cap Screw is Supplied with Pulley. Aluminium Alloy.

Related Information:

Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Insert
Pulleys - Timing -  2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Insert

Search Rating: 72%

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Moulded single or double flange. With brass insert.

2.032mm metric is equivalent to 0.080 pitch imperial.

Related Information:

Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Metal Hub
Pulleys - Timing -  2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Metal Hub

Search Rating: 72%

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Moulded single or double flange. With aluminium hub.

2.032mm metric is equivalent to 0.080 pitch imperial.

Related Information:

Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Plain
Pulleys - Timing -  2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Plain

Search Rating: 72%

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Moulded single or double flange. No locking device.

2.032mm metric is equivalent to 0.080 pitch imperial.

Related Information:

Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Through Bore
Pulleys - Timing -  2.032mm Pitch - MXL - 6.4mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

2.032mm metric is equivalent to 0.080 pitch imperial.

Related Information:

Pulleys - Timing - 2.032mm Pitch - MXL - 9.5mm Wide - Through Bore
Pulleys - Timing -  2.032mm Pitch - MXL - 9.5mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 9.5 to 9.6mm wide

2.032mm metric is equivalent to 0.080 pitch imperial. Aluminium Alloy. Finished Through Bore Ready To Assemble.

Related Information:

Pulleys - Timing - 2.032mm Pitch - MXL - STOCK - Aluminium
Pulleys - Timing -  2.032mm Pitch - MXL - STOCK - Aluminium

Search Rating: 72%

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

2.032mm metric is equivalent to 0.080 pitch imperial.

Related Information:

Pulleys Timing T01 1mm

TopHide Pictures

Pulleys - Timing - 1.000mm Pitch - 3mm Wide - Through Bore
Pulleys - Timing -  1.000mm Pitch - 3mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All 1mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 1mm Pitch Timing Belts.

Aluminium Alloy.

Related Information:

Pulleys - Timing - 1.000mm Pitch - 6mm Wide - Through Bore
Pulleys - Timing -  1.000mm Pitch - 6mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All 1mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 1mm Pitch Timing Belts.

Aluminium Alloy.

Related Information:

Pulleys Timing T10 10mm

TopHide Pictures

Pulleys - Timing - 10.000mm Pitch - T10 - STOCK - Aluminium
Pulleys - Timing - 10.000mm Pitch - T10 - STOCK - Aluminium

Search Rating: 72%

Also see combined categories:
All 10mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

Related Information:

Pulleys Timing T2.5 2.5mm

TopHide Pictures

Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium
Pulleys - Timing -  2.500mm Pitch - T2.5 - STOCK - Aluminium

Search Rating: 72%

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

Related Information:

Pulleys Timing T5 5mm

TopHide Pictures

Pulleys - Timing - 5.000mm Pitch - T5 - 10mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - T5 - 10mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 9.5 to 10.0mm wide.

Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.

Related Information:

Pulleys - Timing - 5.000mm Pitch - T5 - 16mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - T5 - 16mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 15.0 to 16.0mm wide.

Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.

Related Information:

Pulleys Timing XL Pitch 5.08mm

TopHide Pictures

Pulleys - Timing - 5.080mm Pitch - XL - 6.4mm Wide - Through Bore
Pulleys - Timing -  5.080mm Pitch - XL - 6.4mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

Aluminium alloy. Finished bore with set screw locking.

Related Information:

Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Plastic - Insert
Pulleys - Timing -  5.080mm Pitch - XL - 9.5mm Wide - Plastic - Insert

Search Rating: 72%

Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Brass insert.

Related Information:

Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Plastic - Metal Hub
Pulleys - Timing -  5.080mm Pitch - XL - 9.5mm Wide - Plastic - Metal Hub

Search Rating: 72%

Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Metal Hub.

Related Information:

Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Through Bore
Pulleys - Timing -  5.080mm Pitch - XL - 9.5mm Wide - Through Bore

Search Rating: 72%

Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.

Aluminium alloy and Black Oxide coated steel. Finished bore with set screw locking.

Related Information:

Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Aluminium
Pulleys - Timing -  5.080mm Pitch - XL - STOCK - Aluminium

Search Rating: 72%

Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys
All XL 5.08mm Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

Related Information:

Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Carbon Steel
Pulleys - Timing -  5.080mm Pitch - XL - STOCK - Carbon Steel

Search Rating: 72%

Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys
All XL 5.08mm Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

Related Information:

Pins Dowel

TopHide Pictures

Pins - Groove
Pins - Groove

Search Rating: 72%

Also see combined categories:
All Groove Pins

Non threaded press fit fastener that doesn't require a reamed hole as do dowel pins.Commonly used in place of taper pins.

An economic method of fastening without the need for precision drilled and reamed holes. Recommended hole tolerance is H11. Total length may be slightly longer than the nominal length. Expanded portion of the pin is compressed into the hole a few thousands of an inch wider than the nominal pin diameter. Radial forces lock the pin securely into the drilled hole.


Easy Selection Kits

TopHide Pictures

Kits - Pulleys - Plastic - Hobby
Kits - Pulleys - Plastic - Hobby

Search Rating: 72%

This 6 pack pulley wheek kit is very useful many interestiing projects for torque transmition. Hobbyists and students will love to have them.

Related Information:

Bearings Grooved Profile

TopHide Pictures

Bearings - Vee Groove Profile OD
Bearings - Vee Groove Profile OD

Search Rating: 71%

Special OD Bearings.

Related Information:

Bearings Special Purpose

TopHide Pictures

Bearings - Gothic Groove Profile OD
Bearings - Gothic Groove Profile OD

Search Rating: 71%

Bearings with a Gothic Groove in OD. Round Track Rolling Applications.

Type GP : Single Row of Balls (Radial). Type DWRAGP : Double Row of Balls (Angular Contact) - Extended Inner Ring. Type DRAGP : Double Row of Balls (Angular Contact) - Flush Inner Ring.

Related Information:

Pulleys Flanges

TopHide Pictures

Flanges - Timing Pulley - Suit 2.000mm GT2 Series - Aluminium
Flanges - Timing Pulley - Suit  2.000mm GT2 Series - Aluminium

Search Rating: 71%

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

Related Information:

Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit  3.000mm HTD Series - Aluminium

Search Rating: 71%

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

Related Information:

Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit  5.000mm HTD Series - Aluminium

Search Rating: 71%

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

Related Information:

Flanges - Timing Pulley - Suit 5.000mm HTD Series - Carbon Steel
Flanges - Timing Pulley - Suit  5.000mm HTD Series - Carbon Steel

Search Rating: 71%

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

Related Information:

Flanges - Timing Pulley - Suit 5.080mm XL Series - Carbon Steel
Flanges - Timing Pulley - Suit  5.080mm XL Series - Carbon Steel

Search Rating: 71%

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

Related Information:

Easy Selection Kits

TopHide Pictures

Kits - Timing Belt and Pulley
Kits - Timing Belt and Pulley

Search Rating: 70%

Ready to go sets of timing gears and pulleys for when you just want something quickly

Related Information:

Bearings Single Row Ball

TopHide Pictures

Bearings - Ball - With Snap Ring Groove Only - Chrome Steel
Bearings - Ball - With Snap Ring Groove Only - Chrome Steel

Search Rating: 70%

Also see combined categories:
All Radial Ball Bearings
All Bearings with Snap Ring or Groove

Chrome Steel Bearings with a Snap Ring Groove on the OD. No Snap Ring.

Single row radial ball bearings with snap ring groove. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

Locking Assemblies

TopHide Pictures

Assemblies - Locking - Flanged
Assemblies - Locking - Flanged

Search Rating: 68%

Also see combined categories:
All Locking Assemblies

Suitable for locking sprockets, pulleys, eccentric shafts.

Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.


Spacers

TopHide Pictures

Spacers - Arbor
Spacers - Arbor

Search Rating: 68%

Flat arbor shim washers with keyway groove.


Gear Blanks

TopHide Pictures

Gears - Blanks
Gears - Blanks

Search Rating: 68%

Blanks for cutting gears and pulleys and friction drives.


Kites

TopHide Pictures

Caps - End - Kite
Caps - End - Kite

Search Rating: 67%

End caps with string holes and grooves for kite rods.

Joiners and connectors suitable for rod and tubing as well as for kites.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Caps - End - Kite.

Bearings and Housings Insert

TopHide Pictures

Housings - Bearing - Flanged - Offset - Cast Iron
Housings - Bearing - Flanged - Offset - Cast Iron

Search Rating: 66%

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

Housings - Bearing - Flanged - Square - Cast Iron
Housings - Bearing - Flanged - Square - Cast Iron

Search Rating: 66%

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

Housings - Bearing - Pillow Block - Cast Iron
Housings - Bearing - Pillow Block - Cast Iron

Search Rating: 66%

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

Tools Pullers

TopHide Pictures

Tools - Pullers - Small
Tools - Pullers - Small

Search Rating: 66%

Also see combined categories:
All Tools

Small pullers for miniature bearings, gears, pulleys, sprockets and other pressed on parts.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - Pullers - Small.

Bushings - QD and Taperlock

TopHide Pictures

Bushings - QD
Bushings - QD

Search Rating: 65%

Used with QD type cast iron vee pulleys, timing pulleys, sprockets, poly vee pulleys and other parts designed specifically for use with a QD bushing

Similar to a taperlock bush, but not interchangeable. QD bushings like taperlock bushings allow for use of a single stock pulley for many applications with different shaft sizes. Select the correct QD series to suit the pulley.


Bearings and Housings Insert

TopHide Pictures

Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron
Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron

Search Rating: 65%

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

Educational Projects

TopHide Pictures

Kits - Mousetrap Spare Parts
Kits - Mousetrap Spare Parts

Search Rating: 65%

Also see combined categories:
All Educational Projects

Spare parts such as axles, string, spacers and pulleys for your mousetrap vehicles.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Kits - Mousetrap Spare Parts.

Tolerance Rings

TopHide Pictures

Rings - Tolerance
Rings - Tolerance

Search Rating: 64%

Tolerance rings allow looser tolerances for assembly of parts such as bearings, pulleys and gears.

Allows looser tolerances of components. Ideal for mounting ball bearings. Useful for salvaging worn parts. Permits low cost assembly by eliminating the need for conventional fasteners. Use Torque Transfer figures for gears and pulleys. Non torque transfer figures are for bearing applications.


Locking Compounds

TopHide Pictures

Retaining Compounds
Retaining Compounds

Search Rating: 63%

Also see combined categories:
All Adhesives

Molytec and Loctite. Includes Quickmetal. High and medium retaining for bearings, bushes, gears, pulleys and sprockets.

Related Information:

Rollers

TopHide Pictures

Rollers - Bearing - Nylon Covered
Rollers - Bearing - Nylon Covered

Search Rating: 63%

Also see combined categories:
All Tyred OD Bearings
All Rollers

Nylon tyred rollers for heavy duty applications

Nylon tyre (tire) covering a precision deep groove radial ball bearings.

Related Information:

Circlips

TopHide Pictures

Circlips - Internal - Inverted
Circlips - Internal - Inverted

Search Rating: 63%

Also see combined categories:
All Internal Circlips

M1308 / JV / INTV / BN830. Retaining rings. Snap Rings (USA).

Inverted lugs seat into the groove for better clearance and cleaner appearance. Good for shielded bearings that pass tightly through the bore or housing. Use recommended installation pliers.


Pins General

TopHide Pictures

Pins - Hitch - External
Pins - Hitch - External

Search Rating: 63%

Also see combined categories:
All External Hitch Pins

Similar to R-Clips, but designed for both arms to fit around a shaft groove rather thand having one arm through a bored hole.


Belts Posi-Drive

TopHide Pictures

Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core
Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core

Search Rating: 61%

Also see combined categories:
All Posi-Drive Belts

Same as US 20 Pitch - Use with Posi-Drive Pulleys.

Use Single Core with Posi-Drive Pulleys. 3.990mm Circular Pitch. Same as US 20 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined.

Related Information:

Circlips

TopHide Pictures

Circlips - External - Round Section
Circlips - External - Round Section

Search Rating: 61%

Also see combined categories:
All External Circlips

DIN7993A / RW / BN825. Retaining rings. Snap Rings (USA).

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins.


Circlips - Internal - Round Section
Circlips - Internal - Round Section

Search Rating: 60%

Also see combined categories:
All Internal Circlips

Includes DIN7993B / RB / M1700 / BN826. Retaining rings. Snap Rings (USA).

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins.


Clamping Rings

TopHide Pictures

Spiral Rings - Internal - Medium-Heavy Duty
Spiral Rings - Internal - Medium-Heavy Duty

Search Rating: 59%

Also see combined categories:
All Internal Spiral Rings

Includes Series AMI / WHT / Spirolox RRT - Spring Steel and Stainless Steel.

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT.



Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 124193 products in 3084 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.